Queue-color-to-cos Map Profile Configuration

OcNOS-DC 6.4.2 : Quality of Service Guide : Quality of Service Configuration Guide : Queue-color-to-cos Map Profile Configuration

This chapter contains a complete sample of configuring queue-color-to-cos map profile.

Topology

Queue color-to-cos map profile configuration

Configuration queue-color-to-qos map profile

The following steps describe how to configure queue-color-to-cos map profile on configuration mode.

#configure terminal	Enter configure mode.
(config)#qos enable	Enable QoS globally.
(config)#qos statistics	Enable QoS statistics.
(config)#qos profile queue-color-to-cos Profile5	Enter queue-color-to-cos profile configuration mode
(config-ingress-cos-map)#queue 2 color all cos 7	Map queue 2 to cos 7 for all colors under cos-to-queue profile configuration mode
(config-egress-cos-map)#exit	Exit queue-color-to-cos configuration mode
(config)#qos profile queue-color-to-cos default	Enter queue-color-to-cos default map profile configuration mode
(config-egress-cos-map)#queue 3 cos 5	Map queue 3 frames to cos 5
(config-egress-cos-map)#exit	Exit queue-color-to-cos
(config)#exit	Exit configure mode.

Validation

Enter the commands below to confirm the configurations.

#show running-config qos

qos enable

qos statistics

qos profile queue-color-to-cos default

queue 3 color all cos 5

qos profile queue-color-to-cos Profile5

queue 2 color all cos 7

Configuration of Queue-color-to-cos Map Profile on Interface mode

The following steps describe how to configure Queue-color-to-cos map profile on interface mode.

#configure terminal	Enter configure mode.
(config)#qos enable	Enable QoS globally.
(config)#qos statistics	Enable QoS statistics.
(config)#interface xe2	Enter interface mode.
(config-if)#switchport	Configure the port as switchport
(config-if)#qos map-profile queue-color-to-cos Profile5	map queue-color-to-cos profile on the interface
(config-if)#exit	Exit interface mode.
(config)#exit	Exit configure mode.

Validation

Enter the commands below to confirm the configurations.

# show running-config qos

qos enable

qos statistics

qos profile queue-color-to-cos default

queue 3 color all cos 5

qos profile queue-color-to-cos Profile5

queue 2 color all cos 7

interface xe2

qos map-profile queue-color-to-cos Profile5

#show qos-profile type queue-color-to-cos Profile5

profile name: Profile5

profile type: queue-color-to-cos

profile attached to 1 instances

configured mapping:

queue 2 color all cos 7

Detailed mapping:

----------------+-------- | ----------------+-------- | ----------------+--------

----------------+-------- | ----------------+-------- | ----------------+--------

-------+--------+-------- | -------+--------+-------- | -------+--------+--------

0 green 0 | 0 yellow 0 | 0 red 0

1 green 1 | 1 yellow 1 | 1 red 1

2 green 7 | 2 yellow 7 | 2 red 7

3 green 3 | 3 yellow 3 | 3 red 3

4 green 4 | 4 yellow 4 | 4 red 4

5 green 5 | 5 yellow 5 | 5 red 5

6 green 6 | 6 yellow 6 | 6 red 6

7 green 7 | 7 yellow 7 | 7 red 7