Queue-color-to-dscp Map Profile Configuration

OcNOS-DC 6.4.2 : Quality of Service Guide : Quality of Service Configuration Guide : Queue-color-to-dscp Map Profile Configuration

This chapter contains a complete sample of configuring queue-color-to-dscp map profile.

Topology

Queue color-to-dscp map profile configuration

Configuration queue-color-to-dscp map profile

The following steps describe how to configure queue-color-to-dscp map profile on configuration mode.

#configure terminal	Enter configure mode.
(config)#qos enable	Enable QoS globally.
(config)#qos statistics	Enable QoS statistics.
(config)#qos profile queue-color-to-dscp Profile6	Enter queue-color-to-dscp profile configuration mode
(config-egress-dscp-map)#queue 3 color green dscp 48	Map queue 3 to dscp 48 for green color traffic under queue-color-to-dscp profile configuration mode
(config-egress-dscp-map)#exit	Exit queue-color-to-dscp map configuration mode
(config)#qos profile queue-color-to-dscp default	Enter queue-color-to-dscp default map profile configuration mode
(config-egress-dscp-map)#queue 5 dscp 32	Map queue 5 frames to dscp 32
(config-egress-cos-map)#exit	Exit queue-color-to-dscp configuration mode
(config)#exit	Exit configure mode.

Validation

Enter the commands below to confirm the configurations.

#show running-config qos

qos enable

qos statistics

qos profile queue-color-to-dscp default

queue 5 color all dscp 32

qos profile queue-color-to-dscp Profile6

queue 3 color green dscp 48

! ?

Configuration of Queue-color-to-dscp Map Profile on Interface mode

The following steps describe how to configure Queue-color-to-dscp map profile on interface mode.

#configure terminal	Enter configure mode.
(config)#qos enable	Enable QoS globally.
(config)#qos statistics	Enable QoS statistics.
(config)#interface xe2	Enter interface mode.
(config-if)#switchport	Configure the port as switchport
(config-if)#qos map-profile queue-color-to-dscp Profile6	map queue-color-to-dscp profile on the interface
(config-if)#exit	Exit interface mode.
(config)#exit	Exit configure mode.

Validation

Enter the commands below to confirm the configurations.

# show running-config qos

qos enable

qos statistics

qos profile queue-color-to-dscp default

queue 5 color all dscp 32

qos profile queue-color-to-dscp Profile6

queue 3 color green dscp 48

interface xe2

qos map-profile queue-color-to-dscp Profile6

#show qos-profile type queue-color-to-dscp Profile6

profile name: Profile6

profile type: queue-color-to-dscp

profile attached to 1 instances

configured mapping:

queue 3 color green dscp 48

Detailed mapping:

----------------+-------- | ----------------+-------- | ----------------+--------

----------------+-------- | ----------------+-------- | ----------------+--------

-------+--------+-------- | -------+--------+-------- | -------+--------+--------

0 green 0 | 0 yellow 0 | 0 red 0

1 green 10 | 1 yellow 12 | 1 red 14

2 green 18 | 2 yellow 20 | 2 red 22

3 green 48 | 3 yellow 28 | 3 red 30

4 green 34 | 4 yellow 36 | 4 red 38

5 green 40 | 5 yellow 40 | 5 red 40

6 green 48 | 6 yellow 48 | 6 red 48

7 green 56 | 7 yellow 56 | 7 red 56