OcNOS DC : Quality of Service Guide : Quality of Service Configuration Guide : Queue-color-to-cos Map Profile Configuration
Queue-color-to-cos Map Profile Configuration
This chapter contains a complete sample of configuring queue-color-to-cos map profile.
Topology
Queue color-to-cos map profile configuration
Configuration queue-color-to-qos map profile
The following steps describe how to configure queue-color-to-cos map profile on configuration mode.
 
#configure terminal
Enter configure mode.
(config)#qos enable
Enable QoS globally.
(config)#qos statistics
Enable QoS statistics.
(config)#qos profile queue-color-to-cos Profile5
Enter queue-color-to-cos profile configuration mode
(config-ingress-cos-map)#queue 2 color all cos 7
Map queue 2 to cos 7 for all colors under cos-to-queue profile configuration mode
(config-egress-cos-map)#exit
Exit queue-color-to-cos configuration mode
(config)#qos profile queue-color-to-cos default
Enter queue-color-to-cos default map profile configuration mode
(config-egress-cos-map)#queue 3 cos 5
Map queue 3 frames to cos 5
(config-egress-cos-map)#exit
Exit queue-color-to-cos
(config)#exit
Exit configure mode.
Validation
Enter the commands below to confirm the configurations.
#show running-config qos
qos enable
qos statistics
!
qos profile queue-color-to-cos default
queue 3 color all cos 5
!
qos profile queue-color-to-cos Profile5
queue 2 color all cos 7
!
 
 
Configuration of Queue-color-to-cos Map Profile on Interface mode
The following steps describe how to configure Queue-color-to-cos map profile on interface mode.
 
#configure terminal
Enter configure mode.
(config)#qos enable
Enable QoS globally.
(config)#qos statistics
Enable QoS statistics.
(config)#interface xe2
Enter interface mode.
(config-if)#switchport
Configure the port as switchport
(config-if)#qos map-profile queue-color-to-cos Profile5
map queue-color-to-cos profile on the interface
(config-if)#exit
Exit interface mode.
(config)#exit
Exit configure mode.
Validation
Enter the commands below to confirm the configurations.
# show running-config qos
qos enable
qos statistics
!
qos profile queue-color-to-cos default
queue 3 color all cos 5
!
qos profile queue-color-to-cos Profile5
queue 2 color all cos 7
!
!
!
interface xe2
qos map-profile queue-color-to-cos Profile5
!
 
#show qos-profile type queue-color-to-cos Profile5
profile name: Profile5
profile type: queue-color-to-cos
profile attached to 1 instances
configured mapping:
queue 2 color all cos 7
Detailed mapping:
----------------+-------- | ----------------+-------- | ----------------+--------
INPUT | OUTPUT | INPUT | OUTPUT | INPUT | OUTPUT
----------------+-------- | ----------------+-------- | ----------------+--------
Queue | Color | COS | Queue | Color | COS | Queue | Color | COS
-------+--------+-------- | -------+--------+-------- | -------+--------+--------
0 green 0 | 0 yellow 0 | 0 red 0
1 green 1 | 1 yellow 1 | 1 red 1
2 green 7 | 2 yellow 7 | 2 red 7
3 green 3 | 3 yellow 3 | 3 red 3
4 green 4 | 4 yellow 4 | 4 red 4
5 green 5 | 5 yellow 5 | 5 red 5
6 green 6 | 6 yellow 6 | 6 red 6
7 green 7 | 7 yellow 7 | 7 red 7