BGP-VPLS Service Mapping Configuration
Overview
This chapter includes step-by-step configurations for BGP VPLS. It also contains an overview of the concepts of BGP VPLS. Virtual Private LAN Service (VPLS) is a way to provide Ethernet-based multipoint-to-multipoint communication over IP- MPLS networks. It allows geographically-dispersed sites to share an Ethernet broadcast domain by connecting sites through pseudowires
Topology
The diagram depicts the topology for the configuration examples that follow.
BGP-VPLS SM
Configuration
PE-1 Loopback Interface
#configure terminal | Enter configuration mode |
(config)#interface lo | Enter the Interface mode for the loopback interface |
(config-if)#ip address 21.21.21.21/32 secondary | Configure IP address on loopback interface |
(config-if)#exit | Exit interface mode |
PE-1 Interface Configuration
(config)#interface xe2 | Enter the Interface mode for xe2 |
(config-if)# ip address 10.10.23.21/24 | Configure IP address on the interface |
(config-if)#enable-rsvp | Enable RSVP on the physical interface |
(config-if)# label-switching | Enable label switching on the interface. |
(config-if)#exit | Exit interface mode |
PE1 OSPF Configuration
(config)#router ospf 100 | Enter the Router OSPF mode. |
(config-router)#ospf router-id 21.21.21.21 | Router-id configurations |
(config-router)#network 21.21.21.21/32 area 0 | Advertise loopback address in OSPF. |
(config-router)#network 10.10.23.0/24 area 0 | Advertise network address in OSPF. |
(config-router)#exit | Exit Router OSPF mode and return to Configure mode. |
PE1 Global RSVP
(config)#router rsvp | Enter the Router OSPF mode. |
(config-router)#exit | Exit Router RSVP mode and return to Configure mode. |
PE1 RSVP-Trunk Configuration
(config)#rsvp-trunk 1 | Enter the Trunk configuration mode |
(config-trunk)#to 23.23.23.23 | Configure the destination of the Trunk |
(config-trunk)#exit | Exit.Trunk configuration mode |
PE1 BGP Configuration
(config)# router bgp 100 | Enter the BGP configuration mode. |
(config-router)#neighbor 23.23.23.23 remote-as 100 | Configure neighbor |
(config-router)#neighbor 23.23.23.23 update-source 21.21.21.21 | Update loopback address as source |
(config-router)#address-family l2vpn vpls | Enter address family mode. |
(config-router-af)#neighbor 23.23.23.23 activate | Activate the neighbor. |
(config-router-af)#exit | Exit address family mode. |
(config-router)#exit | Exit Router BGP mode |
PE1 BGP VPLS Configuration
(config)#mpls vpls v1 25 | Enter VPLS config mode |
(config)#service-tpid dot1.ad | Service tp-id configuration. |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 1 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v2 26 | Enter VPLS config mode |
(config)#service-tpid dot1.ad | Service tp-id configuration. |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 1 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v3 27 | Enter VPLS config mode |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 1 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v4 28 | Enter VPLS config mode |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 1 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
P1 Loopback Interface
#configure terminal | Enter configuration mode |
(config)#interface lo | Enter the Interface mode for the loopback interface |
(config-if)#ip address 22.22.22.22/32 secondary | Configure IP address on loopback interface |
(config-if)#exit | Exit interface mode |
P1 Interface Configuration
(config)#interface xe1 | Enter the Interface mode for xe1 |
(config-if)#ip address 10.10.23.22/24 | Configure IP address on the interface |
(config-if)#enable-rsvp | Enable RSVP on the physical interface |
(config-if)#label-switching | Enable label switching on the interface. |
(config-if)#exit | Exit interface mode |
(config)#interface xe2 | Enter the Interface mode for xe2 |
(config-if)#ip address 10.10.21.22/24 | Configure IP address on the interface |
(config-if)#enable-rsvp | Enable RSVP on the physical interface |
(config-if)#label-switching | Enable label switching on the interface |
(config-if)#exit | Exit interface mode |
P1 OSPF Configuration
(config)#router ospf 100 | Enter the Router OSPF mode. |
(config-router)#network 22.22.22.22/32 area 0 | Advertise loopback address in OSPF. |
(config-router)#network 10.10.23.0/24 area 0 | Advertise network address in OSPF. |
(config-router)#network 10.10.21.0/24 area 0 | Advertise network address in OSPF. |
(config-router)#exit | Exit Router OSPF mode and return to Configure mode. |
P1 Global RSVP
(config)#router rsvp | Enter the Router OSPF mode. |
(config-router)#exit | Exit Router RSVP mode and return to Configure mode. |
(config)#commit | Commit candidate configuration to running configuration |
PE-2 Loopback Interface
#configure terminal | Enter configuration mode. |
(config)#interface lo | Enter the Interface mode for the loopback interface. |
(config-if)#ip address 23.23.23.23/32 secondary | Configure IP address on loopback interface. |
(config-if)#exit | Exit interface mode |
PE-2 Interface Configuration
(config)#interface xe1 | Enter the Interface mode for xe1 |
(config-if)#ip address 10.10.21.23/24 | Configure IP address on the interface |
(config-if)#enable-rsvp | Enable RSVP on the physical interface |
(config-if)#label-switching | Enable label switching on the interface |
(config-if)#exit | Exit interface mode |
PE-2 OSPF Configuration
(config)#router ospf 100 | Enter the Router OSPF mode. |
(config-router)#network 23.23.23.23/32 area 0 | Advertise loopback address in OSPF. |
(config-router)#network 10.10.23.0/24 area 0 | Advertise network address in OSPF. |
(config-router)#exit | Exit Router OSPF mode and return to Configure mode. |
PE-2 Global RSVP
(config)#router rsvp | Enter the Router OSPF mode. |
(config-router)#exit | Exit Router RSVP mode and return to Configure mode. |
PE-2 RSVP-Trunk Configuration
(config)#rsvp-trunk 1 | Enter the Trunk configuration mode |
(config-trunk)#to 21.21.21.21 | Configure the destination of the Trunk |
(config-trunk)#exit | Exit Trunk configuration mode |
PE-2 BGP Configuration
(config)# router bgp 100 | Enter the BGP configuration mode. |
(config-router)#neighbor 21.21.21.21 remote-as 100 | Configure neighbor |
(config-router)#neighbor 21.21.21.21 update-source 21.21.21.21 | Update loopback address as source |
(config-router)#address-family l2vpn vpls | Enter address family mode. |
(config-router-af)#neighbor 21.21.21.21 activate | Activate the neighbor. |
(config-router-af)#exit | Exit address family mode. |
(config-router)#exit | Exit Router BGP mode |
PE-2 BGP VPLS Configuration
(config)#mpls vpls v1 25 | Enter VPLS config mode |
(config)#service-tpid dot1.ad | Service tp-id configuration. |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 2 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v2 26 | Enter VPLS config mode |
(config)#service-tpid dot1.ad | Service tp-id configuration. |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 2 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v3 27 | Enter VPLS config mode |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 2 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#mpls vpls v4 28 | Enter VPLS config mode |
(config-vpls)#signaling bgp | Define Signaling as BGP |
(config-vpls-sig)#ve-id 2 | Configure VE-ID |
(config-vpls-sig)#exit | Exit Signaling BGP mode |
(config-vpls)#exit | Exit VPLS mode |
(config)#commit | Commit candidate configuration to running configuration |
BGP VPLS Service Mapping Configuration
PE-1 POP
(config)#configure terminal | Configure mode |
(config)#service-template template1 | Template configuration |
(config-svc)# match double-tag outer-vlan 2024 inner-vlan 2023 | Match criteria under template configuration |
(config-svc)# rewrite ingress pop outgoing-tpid dot1.q | Action to be performed for the match |
(config-svc)#exit | Exit template configuration mode |
PE-1 XLATE
(config)#service-template template2 | Template configuration |
(config-svc)# match double-tag outer-vlan 2030 inner-vlan 2024 | Match criteria under template configuration |
(config-svc)# rewrite ingress translate 2026 outgoing-tpid dot1.q | Action to be performed for the match |
(config-svc)#exit | Exit template configuration mode |
PE-1 PUSH
(config)#service-template template3 | Template configuration |
(config-svc)# match outer-vlan 500 | Match criteria under template configuration |
(config-svc)# rewrite ingress push 300 | Action to be performed for the default match |
(config-svc)#exit | Exit template configuration mode |
PE-1 PUSH-service-template with multiple match
This is to validate the multiple match criteria support in a service template. When multiple match statements are configured only rewrite push is supported, rewrite translate and pop are not supported.
(config)#service-template template4 | Template configuration |
(config-svc)# match outer-vlan 700 | Allow VLAN 700 traffic on this VC |
(config-svc)# match double-tag outer-vlan 1200 inner-vlan 3200 | Allow double tag match with s+c tags |
(config-svc)# match untagged | Allow untagged traffic |
(config-svc)# rewrite ingress push 300 | Push Action performed for service template |
(config-svc)#exit | Exit configure SVC mode |
PE-1 Access port Configuration
(config)#interface xe1 | Enter the Interface mode for xe1 |
(config-if)switchport | Configure interface as L2 interface |
(config-if)#mpls-vpls v1 service-template template1 | Bind the VPLS to the Access Interface |
(config-if-vpls)no ac-admin-status | Making Ac-admin-status Up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v2 service-template template2 | Bind the VPLS to the Access Interface |
(config-if-vpls)no ac-admin-status | Making Ac-admin-status Up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v3 service-template template3 | Bind the VPLS to the Access Interface |
config-if-vpls)no ac-admin-status | Making Ac-admin-status Up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v4 service-template template4 | Bind the VPLS to the Access Interface |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#no ac-admin-status | Making Ac-admin-status Up |
(config-if)#exit | Exit Interface mode and return to Configure mode |
(config)#commit | Commit candidate configuration to running configuration |
PE-2 POP
(config)#configure terminal | Configure mode |
(config)#service-template template1 | Template configuration |
(config-svc)# match double-tag outer-vlan 2024 inner-vlan 2023 | Match criteria under template configuration |
(config-svc)# rewrite ingress pop outgoing-tpid dot1.ad | Action to be performed for the match. |
(config-svc)#exit | Exit template configuration mode |
PE-2 XLATE
(config)#service-template template2 | Template configuration |
(config-svc)# match double-tag outer-vlan 2030 inner-vlan 2024 | Match criteria under template configuration |
(config-svc)# rewrite ingress translate 2026 outgoing-tpid dot1.q | Action to be performed for the match |
(config-svc)#exit | Exit template configuration mode |
PE-2 PUSH
(config)#service-template template3 | Template configuration |
(config-svc)# match outer-vlan 500 | Match criteria under template configuration |
(config-svc)# rewrite ingress push 300 | Action to be performed for the default match |
(config-svc)#exit | Exit template configuration mode |
PE-2 PUSH-service-template with multiple match
This is to validate the multiple match criteria support in a service template. When multiple match statements are configured only rewrite push is supported, rewrite translate and pop are not supported.
(config)#service-template template4 | Template configuration |
(config-svc)# match outer-vlan 700 | Allow VLAN 700 traffic on this VC |
(config-svc)# match double-tag outer-vlan 1200 inner-vlan 3200 | Allow double tag match with s+c tags |
(config-svc)# match untagged | Allow untagged traffic |
(config-svc)# rewrite ingress push 300 | Push Action performed for service template |
(config-svc)#exit | Exit configure SVC mode |
PE-2 Access port Configuration
(config)#interface xe2 | Enter the Interface mode for xe1 |
(config-if)#mpls-vpls v1 service-template template1 | Bind the VPLS to the Access Interface |
(config-if-vpls)#no ac-admin-status | Making admin status up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v2 service-template template2 | Bind the VPLS to the Access Interface |
(config-if-vpls)#no ac-admin-status | Making admin status up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v3 service-template template3 | Bind the VPLS to the Access Interface |
(config-if-vpls)#no ac-admin-status | Making admin status up |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#mpls-vpls v4 service-template template4 | Bind the VPLS to the Access Interface |
(config-if-vpls)#exit | Exit VPLS attachment-circuit mode |
(config-if)#no ac-admin-status | Making Ac-admin-status Up |
(config-if)#exit | Exit Interface mode and return to Configure mode |
Validation
Router1
#show bgp l2vpn vpls
VPLS-ID VE-ID Discovered-Peers Route-Target
25 1 1 100:25
26 1 1 100:26
27 1 1 100:27
28 1 1 100:28
#show bgp l2vpn vp
vpls vpws
#show bgp l2vpn vpls detail
VPLS ID: 25
VE-ID: 1
Discovered Peers: 1
Route-Target: 100:25
Local RD: 100:25
Mesh Peers:
Address:23.23.23.23, RD:100:25, VE-ID:2
VC Details: VC-ID:12
Remote (LB:53120,VBO:1,VBS:64) Local (LB:53120,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:53121, Out Label:53120
PW Status:Established
VC Installed:Yes
VPLS ID: 26
VE-ID: 1
Discovered Peers: 1
Route-Target: 100:26
Local RD: 100:26
Mesh Peers:
Address:23.23.23.23, RD:100:26, VE-ID:2
VC Details: VC-ID:12
Remote (LB:53120,VBO:1,VBS:64) Local (LB:53184,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:53185, Out Label:53120
PW Status:Established
VC Installed:Yes
VPLS ID: 27
VE-ID: 1
Discovered Peers: 1
Route-Target: 100:27
Local RD: 100:27
Mesh Peers:
Address:23.23.23.23, RD:100:27, VE-ID:2
VC Details: VC-ID:12
Remote (LB:53184,VBO:1,VBS:64) Local (LB:53120,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:53121, Out Label:53184
PW Status:Established
VC Installed:Yes
VPLS ID: 28
VE-ID: 1
Discovered Peers: 1
Route-Target: 100:28
Local RD: 100:28
Mesh Peers:
Address:23.23.23.23, RD:100:28, VE-ID:2
VC Details: VC-ID:12
Remote (LB:53184,VBO:1,VBS:64) Local (LB:53120,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:53122, Out Label:53186
PW Status:Established
VC Installed:Yes
#show mpls vpls mesh
VPLS-ID Peer Addr Tunnel-Label In-Label Network-Intf Out-Label Lkps/St PW-INDEX SIG-Protocol Status
Ecmp-Group
25 23.23.23.23 52480 53121 eth2 53120 2/Up 1 BGP Active
N/A
26 23.23.23.23 52480 53185 eth2 53120 2/Up 2 BGP Active N/A
27 23.23.23.23 52480 53121 eth2 53184 2/Up 3 BGP Active N/A
28 23.23.23.23 52480 53122 eth2 53186 2/Up 3 BGP Active N/A
PE1#show bgp l2vpn vpls detail
VPLS ID: 25
VE-ID: 2
Discovered Peers: 1
Route-Target: 100:25
Local RD: 100:25
Mesh Peers:
Address:21.21.21.21, RD:100:25, VE-ID:1
VC Details: VC-ID:21
Remote (LB:26240,VBO:1,VBS:64) Local (LB:25216,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:25216, Out Label:26241
PW Status:Established
VC Installed:Yes
All Local LB:
LB:25216,VBO:1,VBS:64
VPLS ID: 26
VE-ID: 2
Discovered Peers: 1
Route-Target: 100:26
Local RD: 100:26
Mesh Peers:
Address:21.21.21.21, RD:100:26, VE-ID:1
VC Details: VC-ID:21
Remote (LB:26304,VBO:1,VBS:64) Local (LB:25280,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:25280, Out Label:26305
PW Status:Established
VC Installed:Yes
All Local LB:
LB:25280,VBO:1,VBS:64
VPLS ID: 27
VE-ID: 2
Discovered Peers: 1
Route-Target: 100:27
Local RD: 100:27
Mesh Peers:
Address:21.21.21.21, RD:100:27, VE-ID:1
VC Details: VC-ID:21
Remote (LB:26368,VBO:1,VBS:64) Local (LB:25344,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:25344, Out Label:26369
PW Status:Established
VC Installed:Yes
All Local LB:
LB:25344,VBO:1,VBS:64
VPLS ID: 28
VE-ID: 2
Discovered Peers: 1
Route-Target: 100:28
Local RD: 100:28
Mesh Peers:
Address:21.21.21.21, RD:100:28, VE-ID:1
VC Details: VC-ID:21
Remote (LB:26432,VBO:1,VBS:64) Local (LB:25408,VBO:1,VBS:64)
LB sent on known VEID:Yes
In Label:25408, Out Label:26433
PW Status:Established
VC Installed:Yes
All Local LB:
LB:25408,VBO:1,VBS:64
PE1#show mpls vpls mesh
(m) - Service mapped over multipath transport
VPLS-ID Peer Addr Tunnel-Label In-Label Network-Intf Out-Label
Lkps/St PW-INDEX SIG-Protocol Status
25 21.21.21.21 25600 25216 xe1 26241
2/Up 1 BGP Active
26 21.21.21.21 25600 25280 xe1 26305
2/Up 3 BGP Active
27 21.21.21.21 25600 25344 xe1 26369
2/Up 2 BGP Active
28 21.21.21.21 25600 25408 xe1 26433
2/Up 4 BGP Active
PE1#show mpls vpls detail
Virtual Private LAN Service Instance: v1, ID: 25
SIG-Protocol: BGP
Route-Distinguisher :100:25
Route-Target :100:25
VE-ID :2
Attachment-Circuit :UP
Learning: Enabled
Control-Word: Disabled
Flow Label Status: Disabled, Direction: None, Static: No
Group ID: 0, Configured MTU: 1500
Description: none
service-tpid: dot1.ad
Operating mode: Raw
Configured interfaces:
Interface: xe9
Service-template : template1
Match criteria : 2024/2023
Action type : Pop
Outgoing tpid : dot1.q
Mesh Peers:
21.21.21.21 (Up)
Virtual Private LAN Service Instance: v2, ID: 26
SIG-Protocol: BGP
Route-Distinguisher :100:26
Route-Target :100:26
VE-ID :2
Attachment-Circuit :UP
Learning: Enabled
Control-Word: Disabled
Flow Label Status: Disabled, Direction: None, Static: No
Group ID: 0, Configured MTU: 1500
Description: none
service-tpid: dot1.ad
Operating mode: Raw
Configured interfaces:
Interface: xe9
Service-template : template2
Match criteria : 2030/2024
Action type : Translate
Action value : 2026
Outgoing tpid : dot1.q
Mesh Peers:
21.21.21.21 (Up)
Virtual Private LAN Service Instance: v3, ID: 27
SIG-Protocol: BGP
Route-Distinguisher :100:27
Route-Target :100:27
VE-ID :2
Attachment-Circuit :UP
Learning: Enabled
Control-Word: Disabled
Flow Label Status: Disabled, Direction: None, Static: No
Group ID: 0, Configured MTU: 1500
Description: none
service-tpid: dot1.q
Operating mode: Raw
Configured interfaces:
Interface: xe9
Service-template : template3
Match criteria : 500
Action type : Push
Action value : 300
Mesh Peers:
21.21.21.21 (Up)
Virtual Private LAN Service Instance: v4, ID: 28
SIG-Protocol: BGP
Route-Distinguisher :100:28
Route-Target :100:28
VE-ID :2
Attachment-Circuit :UP
Learning: Enabled
Control-Word: Disabled
Flow Label Status: Disabled, Direction: None, Static: No
Group ID: 0, Configured MTU: 1500
Description: none
service-tpid: dot1.q
Operating mode: Raw
Configured interfaces:
Interface: xe9
Service-template : template4
Match criteria : 700,
Untagged ,
1200/3200
Action type : Push
Action value : 300
Mesh Peers:
21.21.21.21 (Up)