RPVST+ Configuration
This chapter contains a complete example of an RPVST+ configuration.
Topology
RPVST+ configuration
Configuration
Switch 2
#configure terminal | Enter configure mode for the switch. |
(config)#bridge 1 protocol rpvst+ | Configure bridge 1 as an RPVST+ bridge. |
(config)#vlan 2-3 bridge 1 | Configure VLAN 2 and 3 and associate it to bridge 1. |
(config)#spanning-tree rpvst+ configuration | Enter Rapid Per-VLAN Spanning Tree configuration mode. |
(config-rpvst+)#bridge 1 vlan 2 | Associate a configured VLAN with bridge 1. |
(config-rpvst+)#bridge 1 vlan 3 | Associate a configured VLAN with bridge 1,. |
(config-rvpst+)#exit | Exit RPVST+ configuration mode. |
(config)#interface eth1 | Enter interface mode for eth1. |
(config-if)#switchport | Configure eth1 as a Layer 2 port. |
(config-if)#bridge-group 1 | Associate bridge to interface. |
(config-if)#switchport mode trunk | Configure port as trunk. |
(config-if)#switchport trunk allowed vlan add 2,3 | Configure VLAN 2 and VLAN 3 on interface. |
(config-if)#bridge-group 1 vlan 2 | Configure bridge group to interface with VLAN 2. |
(config-if)#bridge-group 1 vlan 3 | Configure bridge group to interface with VLAN 3. |
(config-if)#exit | Exit interface mode. |
(config)#interface eth2 | Enter interface mode for eth2. |
(config-if)#switchport | Configure eth2 as a Layer 2 port. |
(config-if)#bridge-group 1 | Associate bridge to interface/ |
(config-if)#switchport mode trunk | Configure port as trunk |
(config-if)#switchport trunk allowed vlan add 2,3 | Configure VLAN 2 and VLAN 3 on interface. |
(config-if)#bridge-group 1 vlan 2 | Configure bridge group to interface with VLAN 2. |
(config-if)#bridge-group 1 vlan 3 | Configure bridge group to interface with VLAN3. |
(config-if)#exit | Exit interface mode. |
Switch 1
#configure terminal | Enter configure mode for the switch. |
(config)#bridge 1 protocol rpvst+ | Configure bridge 1 as an rpvst+ bridge. |
(config)#vlan 2-3 bridge 1 | Configure VLAN 2 and 3 and associate it to bridge 1. |
(config)#spanning-tree rpvst+ configuration | Enter Rapid Per-VLAN Spanning Tree configuration mode. |
(config-rpvst+)#bridge 1 vlan 2 | Associate a configured VLAN with bridge 1. |
(config-rpvst+)#bridge 1 vlan 3 | Associate a configured VLAN with bridge 1. |
(config-rvpst+)#exit | Exit RPVST+ configuration mode. |
(config)#interface eth1 | Enter interface mode for eth1. |
(config-if)#switchport | Configure eth1 as a Layer 2 port. |
(config-if)#bridge-group 1 | Associate bridge to interface. |
(config-if)#switchport mode trunk | Configure port as trunk. |
(config-if)#switchport trunk allowed vlan add 2,3 | Configure VLAN 2 and VLAN 3 on interface. |
(config-if)#bridge-group 1 vlan 2 | Configure bridge group to interface with VLAN 2. |
(config-if)#bridge-group 1 vlan 3 | Configure bridge group to interface with VLAN3. |
(config-if)#exit | Exit interface mode. |
Switch 3
#configure terminal | Enter configure mode for the switch. |
(config)#bridge 1 protocol rpvst+ | Configure bridge 1 as an rpvst+ bridge |
(config)#vlan 2-3 bridge 1 | Configure VLAN 2 and 3 and associate it to bridge 1. |
(config)#interface eth1 | Enter interface mode for eth1. |
(config-if)#switchport | Configure eth1 as a Layer 2 port. |
(config-if)#bridge-group 1 | Associate bridge to interface. |
(config-if)#switchport mode trunk | Configure port as trunk. |
(config-if)#switchport trunk allowed vlan add 2,3 | Configure VLAN 2 and VLAN 3 on interface. |
(config-if)#exit | Exit interface mode. |
Validation
Switch2
#show spanning-tree rpvst+ vlan 2
% vlan 2 Instance 1 configured
% 1: Root Path Cost 0 - Root Port 0 - Bridge Priority 32768
% 1: Root Id 8002525400b7bfa7
% 1: Bridge Id 8002525400b7bfa7
% eth1: Port Number 3 - Ifindex 3 - Port Id 0x8003 - Role Designated - State Forwarding
% eth1: Designated Internal Path Cost 0 - Designated Port Id 0x8003
% eth1: Configured Internal Path Cost 200000
% eth1: Configured External Path cost 200000
% eth1: Configured Internal Priority 128
% eth1: Configured External Priority 128
% eth1: Designated Root 8002525400b7bfa7
% eth1: Designated Bridge 8002525400b7bfa7
% eth1: Message Age 0 - Max Age 20
% eth1: Hello Time 2 - Forward Delay 15
% eth1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
%
% eth2: Port Number 4 - Ifindex 4 - Port Id 0x8004 - Role Designated - State Forwarding
% eth2: Designated Internal Path Cost 0 - Designated Port Id 0x8004
% eth2: Configured Internal Path Cost 200000
% eth2: Configured External Path cost 200000
% eth2: Configured Internal Priority 128
% eth2: Configured External Priority 128
% eth2: Designated Root 8002525400b7bfa7
% eth2: Designated Bridge 8002525400b7bfa7
% eth2: Message Age 0 - Max Age 20
% eth2: Hello Time 2 - Forward Delay 15
% eth2: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 1
%
#show spanning-tree rpvst+ interface eth1
% 1: Bridge up - Spanning Tree Enabled - topology change detected
% 1: Root Path Cost 0 - Root Port 0 - Bridge Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Transmit Hold Count 6
% 1: Root Id 8001525400b7bfa7
% 1: Bridge Id 8001525400b7bfa7
% 1: last topology change Wed Mar 28 15:33:06 2018
% 1: 2 topology change(s) - last topology change Wed Mar 28 15:33:06 2018
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 300 sec
% eth1: Port Number 3 - Ifindex 3 - Port Id 0x8003 - Role Designated - State Forwarding
% eth1: Designated External Path Cost 0 -Internal Path Cost 0
% eth1: Configured Path Cost 200000 - Add type Explicit ref count 3
% eth1: Designated Port Id 0x8003 - Priority 128 -
% eth1: Root 8001525400b7bfa7
% eth1: Designated Bridge 8001525400b7bfa7
% eth1: Message Age 0 - Max Age 20
% eth1: Hello Time 2 - Forward Delay 15
% eth1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 2 - topo change timer 0
% eth1: forward-transitions 1
% eth1: Version Rapid Spanning Tree Protocol - Received None - Send RSTP
% eth1: No portfast configured - Current portfast off
% eth1: bpdu-guard default - Current bpdu-guard off
% eth1: bpdu-filter default - Current bpdu-filter off
% eth1: no root guard configured - Current root guard off
% eth1: Configured Link Type point-to-point - Current point-to-point
% eth1: No auto-edge configured - Current port Auto Edge off
%
%
% Instance VLAN
% 0: 1
% 1: 2
% 2: 3
#show spanning-tree rpvst+ detail
% 1: Bridge up - Spanning Tree Enabled - topology change detected
% 1: Root Path Cost 0 - Root Port 0 - Bridge Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Transmit Hold Count 6
% 1: Root Id 8001525400b7bfa7
% 1: Bridge Id 8001525400b7bfa7
% 1: last topology change Wed Mar 28 15:33:06 2018
% 1: 2 topology change(s) - last topology change Wed Mar 28 15:33:06 2018
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 300 sec
% eth1: Port Number 3 - Ifindex 3 - Port Id 0x8003 - Role Designated - State Forwarding
% eth1: Designated External Path Cost 0 -Internal Path Cost 0
% eth1: Configured Path Cost 200000 - Add type Explicit ref count 3
% eth1: Designated Port Id 0x8003 - Priority 128 -
% eth1: Root 8001525400b7bfa7
% eth1: Designated Bridge 8001525400b7bfa7
% eth1: Message Age 0 - Max Age 20
% eth1: Hello Time 2 - Forward Delay 15
% eth1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0 - topo change timer 0
% eth1: forward-transitions 1
% eth1: Version Rapid Spanning Tree Protocol - Received None - Send RSTP
% eth1: No portfast configured - Current portfast off
% eth1: bpdu-guard default - Current bpdu-guard off
% eth1: bpdu-filter default - Current bpdu-filter off
% eth1: no root guard configured - Current root guard off
% eth1: Configured Link Type point-to-point - Current point-to-point
% eth1: No auto-edge configured - Current port Auto Edge off
%
% eth2: Port Number 4 - Ifindex 4 - Port Id 0x8004 - Role Designated - State Forwarding
% eth2: Designated External Path Cost 0 -Internal Path Cost 0
% eth2: Configured Path Cost 200000 - Add type Explicit ref count 3
% eth2: Designated Port Id 0x8004 - Priority 128 -
% eth2: Root 8001525400b7bfa7
% eth2: Designated Bridge 8001525400b7bfa7
% eth2: Message Age 0 - Max Age 20
% eth2: Hello Time 2 - Forward Delay 15
% eth2: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 1 - topo change timer 0
% eth2: forward-transitions 1
% eth2: Version Rapid Spanning Tree Protocol - Received None - Send RSTP
% eth2: No portfast configured - Current portfast off
% eth2: bpdu-guard default - Current bpdu-guard off
% eth2: bpdu-filter default - Current bpdu-filter off
% eth2: no root guard configured - Current root guard off
% eth2: Configured Link Type point-to-point - Current point-to-point
% eth2: No auto-edge configured - Current port Auto Edge off
%
% Instance 1: Vlans: 2
% eth1: Port Number 3 - Ifindex 3 - Port Id 0x8003 - Role Designated - State Forwarding
% eth1: Designated Internal Path Cost 0 - Designated Port Id 0x8003
% eth1: Configured Internal Path Cost 200000
% eth1: Configured External Path cost 200000
% eth1: Configured Internal Priority 128
% eth1: Configured External Priority 128
% eth1: Designated Root 8002525400b7bfa7
% eth1: Designated Bridge 8002525400b7bfa7
% eth1: Message Age 0 - Max Age 20
% eth1: Hello Time 2 - Forward Delay 15
% eth1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
% Instance 1: Vlans: 2
% eth2: Port Number 4 - Ifindex 4 - Port Id 0x8004 - Role Designated - State Forwarding
% eth2: Designated Internal Path Cost 0 - Designated Port Id 0x8004
% eth2: Configured Internal Path Cost 200000
% eth2: Configured External Path cost 200000
% eth2: Configured Internal Priority 128
% eth2: Configured External Priority 128
% eth2: Designated Root 8002525400b7bfa7
% eth2: Designated Bridge 8002525400b7bfa7
% eth2: Message Age 0 - Max Age 20
% eth2: Hello Time 2 - Forward Delay 15
% eth2: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 1
% Instance 2: Vlans: 3
% eth1: Port Number 3 - Ifindex 3 - Port Id 0x8003 - Role Designated - State Forwarding
% eth1: Designated Internal Path Cost 0 - Designated Port Id 0x8003
% eth1: Configured Internal Path Cost 200000
% eth1: Configured External Path cost 200000
% eth1: Configured Internal Priority 128
% eth1: Configured External Priority 128
% eth1: Designated Root 8003525400b7bfa7
% eth1: Designated Bridge 8003525400b7bfa7
% eth1: Message Age 0 - Max Age 20
% eth1: Hello Time 2 - Forward Delay 15
% eth1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
% Instance 2: Vlans: 3
% eth2: Port Number 4 - Ifindex 4 - Port Id 0x8004 - Role Designated - State Forwarding
% eth2: Designated Internal Path Cost 0 - Designated Port Id 0x8004
% eth2: Configured Internal Path Cost 200000
% eth2: Configured External Path cost 200000
% eth2: Configured Internal Priority 128
% eth2: Configured External Priority 128
% eth2: Designated Root 8003525400b7bfa7
% eth2: Designated Bridge 8003525400b7bfa7
% eth2: Message Age 0 - Max Age 20
% eth2: Hello Time 2 - Forward Delay 15
% eth2: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 1