NetConf Command Reference

OcNOS DC : NetConf Command Reference : NetConf Command Reference

IPI-MANAGEMENT-SERVER

Configure feature enabled

Enable callhome feature on the NETCONF server

This command is supported when following feature are enabled NETCONF feature

Attribute Name: feature-enabled

Attribute Type: uint8

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

</feature-enabled>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

callhome enable (vrf (management|NAME)|)

Configure port

Callhome server listening port number

This command is supported when following feature are enabled NETCONF feature

Attribute Name: port

Attribute Type: inet:port-number

Default Value: 4334

Attribute Range: 1-65535

Attribute Name: address

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-clients>

<netconf-client>

<address>A.B.C.D|X:X::X:X|HOSTNAME</address>

</config>

</netconf-client>

</netconf-clients>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

callhome server WORD (A.B.C.D|X:X::X:X|HOSTNAME) (port <1-65535>|)

Configure enable

specifies whether server will reconnect after client closes the session

This command is supported when following feature are enabled NETCONF feature

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

</enable>

</config>

</reconnect>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

reconnect enable

Configure retry max attempts

Specifies the number of retry attempts the server should attempt to the callhome server before giving up. Set 0 to retry infinitely.

This command is supported when following feature are enabled NETCONF feature

Attribute Name: retry-max-attempts

Attribute Type: uint8

Default Value: 3

Attribute Range: 0-255

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<retry-max-attempts>0</retry-max-attempts>

</config>

</reconnect>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

retry-max-attempts <0-255>

Configure retry interval

Specifies the number of seconds to wait after a connect attempt to the callhome server has failed

This command is supported when following feature are enabled NETCONF feature

Attribute Name: retry-interval

Attribute Type: uint32

Default Value: 300

Attribute Range: 1-86400

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<retry-interval>1</retry-interval>

</config>

</reconnect>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

retry-interval <1-86400>

Configure vrf name

Enable debugging info for callhome

This command is supported when following feature are enabled NETCONF feature

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<debug>

</enable>

</config>

</debug>

</callhome>

</callhomes>

</netconf-server>

Command Syntax

debug callhome

Configure translation mode

Enable/disable NETCONF translation

This command is supported when following feature are enabled NETCONF feature,NETCONF translation feature

Attribute Name: translation-mode

Attribute Type: enum (openconfig)

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<netconf-translation>

<translation-mode>openconfig</translation-mode>

</config>

</netconf-translation>

</netconf-server>

Command Syntax

netconf translation (openconfig)

Configure feature netconf ssh

Use this attribute to enable or disable NETCONF SSH feature.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: feature-netconf-ssh

Attribute Type: boolean

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-ssh-config>

<feature-netconf-ssh>true</feature-netconf-ssh>

</config>

</netconf-ssh-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

feature netconf-ssh (vrf (management|NAME)|)

Configure netconf-ssh-config feature-netconf-ssh

Use this attribute to enable or disable NETCONF SSH feature.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: feature-netconf-ssh

Attribute Type: boolean

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-ssh-config>

<feature-netconf-ssh>true</feature-netconf-ssh>

</config>

</netconf-ssh-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

no feature netconf-ssh (vrf (management|NAME)|)

Configure ssh port

Use this attribute to set the ssh-port number on which the NETCONF server listens for connections. The default port on which the netconf-ssh server listens is 830.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: ssh-port

Attribute Type: uint32

Attribute Range: 1024-65535

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-ssh-config>

<ssh-port>1024</ssh-port>

</config>

</netconf-ssh-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

netconf server ssh-port <1024-65535> (vrf (management|NAME)|)

Configure feature netconf tls

Use this attribute to enable or disable NETCONF TLS feature.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: feature-netconf-tls

Attribute Type: boolean

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-tls-config>

<feature-netconf-tls>true</feature-netconf-tls>

</config>

</netconf-tls-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

feature netconf-tls (vrf (management|NAME)|)

Configure netconf-tls-config feature-netconf-tls

Use this attribute to enable or disable NETCONF TLS feature.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: feature-netconf-tls

Attribute Type: boolean

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-tls-config>

<feature-netconf-tls>true</feature-netconf-tls>

</config>

</netconf-tls-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

no feature netconf-tls (vrf (management|NAME)|)

Configure tls port

Use this attribute to set the tls-port number on which the NETCONF server listens for connections. The default port on which the netconf-tls server listens is 6513.

This command is supported when following feature are enabled NETCONF feature,Virtual routing and forwarding

Attribute Name: tls-port

Attribute Type: uint32

Attribute Range: 1024-65535

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<netconf-tls-config>

<tls-port>1024</tls-port>

</config>

</netconf-tls-config>

</vrf>

</vrfs>

</netconf-server>

Command Syntax

netconf server tls-port <1024-65535> (vrf (management|NAME)|)

Configure notification-cache feature-enabled

Enable notification cache feature on the NETCONF server

This command is supported when following feature are enabled NETCONF feature

Attribute Name: feature-enabled

Attribute Type: empty

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<notification-cache>

</feature-enabled>

</config>

</notification-cache>

</netconf-server>

Command Syntax

feature netconf notification-cache enable

Configure max cache notifications

Specifies the maximum number of notifications those can be stored in cache. Set 0 for infinite notifications.

This command is supported when following feature are enabled NETCONF feature

Attribute Name: max-cache-notifications

Attribute Type: uint16

Default Value: 100

Attribute Range: 0-10000

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<notification-cache>

<max-cache-notifications>0</max-cache-notifications>

</config>

</notification-cache>

</netconf-server>

Command Syntax

max-cache-notifications <0-10000>

Configure cache period

Specifies the number of seconds, cmld store notification messages in cache since it started

This command is supported when following feature are enabled NETCONF feature

Attribute Name: cache-period

Attribute Type: uint32

Default Value: 1200

Attribute Range: 1-3600

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<notification-cache>

<cache-period>1</cache-period>

</config>

</notification-cache>

</netconf-server>

Command Syntax

cache-period <1-3600>

Configure disable commit history

This attribute is used to disable features like commit confirmed and commit rollback

Attribute Name: disable-commit-history

Attribute Type: empty

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<commit-history>

</disable-commit-history>

</config>

</commit-history>

</netconf-server>

Command Syntax

cml commit-history disable

Configure bulk config cpu limit enabled

This attribute is used to enable and disable bulk config cpu limit

Attribute Name: bulk-config-cpu-limit-enabled

Attribute Type: empty

Netconf edit-config payload

<netconf-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<bulk-config>

</bulk-config-cpu-limit-enabled>

</config>

</bulk-config>

</netconf-server>

Command Syntax

cml bulk-config limit cpu enable

IPI-STREAMING-TELEMETRY

Configure config maximum subscribe paths

Maximum number of sensor-paths supported for this device

Attribute Name: config-maximum-subscribe-paths

Attribute Type: uint32

Attribute Range: 10-1000

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<config-maximum-subscribe-paths>10</config-maximum-subscribe-paths>

</config>

</global>

</telemetry-system>

Command Syntax

telemetry maximum-subscribe-paths <10-1000>

Configure config minimum sample interval

Minimum sample-interval supported for this device

Attribute Name: config-minimum-sample-interval

Attribute Type: uint32

Attribute Range: 10-3600

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<config-minimum-sample-interval>10</config-minimum-sample-interval>

</config>

</global>

</telemetry-system>

Command Syntax

telemetry minimum-sample-interval <10-3600>

Configure feature enabled

Use this attribute to enable or disable Telemetry feature

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: feature-enabled

Attribute Type: uint8

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<streaming-telemetry>

</feature-enabled>

</config>

</streaming-telemetry>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

feature streaming-telemetry (vrf (management|NAME)|)

Configure insecure tls

Disable certificate validation in a TLS-enabled connection

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: insecure-tls

Attribute Type: empty

Attribute Name: tls-port

Attribute Type: uint32

Attribute Range: 32768-60999

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<streaming-telemetry>

<tls-port>32768</tls-port>

</insecure-tls>

</config>

</streaming-telemetry>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

tls tls-port <32768-60999> (insecure|)

Configure non tls port

Insecure port for Telemetry feature

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: non-tls-port

Attribute Type: uint32

Attribute Range: 32768-60999

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<streaming-telemetry>

<non-tls-port>32768</non-tls-port>

</config>

</streaming-telemetry>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

port <32768-60999>

Configure retry interval

If the grpc-tunnel-server is unreachable, the gnmi-server retries to connect with gnmi-client after the retry-interval

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: retry-interval

Attribute Type: uint32

Default Value: 60

Attribute Range: 30-3000

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<streaming-telemetry>

<retry>

<retry-interval>30</retry-interval>

</config>

</retry>

</streaming-telemetry>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

grpc-tunnel-server retry-interval <30-3000>

Configure name

Reference to the identifier of the subscription itself. The id will be the handle to refer to the subscription once created

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<persistent-subscriptions>

<persistent-subscription>

</config>

</persistent-subscription>

</persistent-subscriptions>

</subscriptions>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

subscription-name NAME (vrf (management|NAME)|)

Configure encoding

Selection of the specific encoding or RPC framework for telemetry messages to and from the network element. The encoding method controls specifically the wire format of the telemetry data, and also controls which RPC framework may be in use to exchange telemetry data

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: encoding

Attribute Type: enum (json-ietf|json|proto)

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<persistent-subscriptions>

<persistent-subscription>

</config>

</persistent-subscription>

</persistent-subscriptions>

</subscriptions>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

encoding (json-ietf|json|proto)

Configure sensor group

Reference to the telemetry sensor group name

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: sensor-group

Attribute Type: string

Attribute Range: 1-64

Attribute Name: sample-interval

Attribute Type: uint64

Attribute Range: 10-3600

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<persistent-subscriptions>

<persistent-subscription>

</config>

<sensor-profiles>

<sensor-profile>

<sensor-group>SENSOR-GROUP-NAME</sensor-group>

<sensor-group>WORD</sensor-group>

<sample-interval>10</sample-interval>

</config>

</sensor-profile>

</sensor-profiles>

</persistent-subscription>

</persistent-subscriptions>

</subscriptions>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

sensor-group SENSOR-GROUP-NAME sample-interval <10-3600>

Configure group id

The destination group id references a configured group of destinations for the telemetry stream

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: group-id

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<persistent-subscriptions>

<persistent-subscription>

</config>

<destination-groups>

<destination-group>

<group-id>GRPC-GROUP-NAME</group-id>

<group-id>WORD</group-id>

</config>

</destination-group>

</destination-groups>

</persistent-subscription>

</persistent-subscriptions>

</subscriptions>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

destination-group GRPC-GROUP-NAME

Configure sensor group id

Name or identifier for the sensor group itself.Will be referenced by other configuration specifying a sensor group

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: sensor-group-id

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<sensor-groups>

<sensor-group>

<sensor-group-id>SENSOR-NAME</sensor-group-id>

<sensor-group-id>WORD</sensor-group-id>

</config>

</sensor-group>

</sensor-groups>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

sensor-group SENSOR-NAME (vrf (management|NAME)|)

Configure path

Reference to the path of interest

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: path

Attribute Type: string

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<sensor-groups>

<sensor-group>

<sensor-group-id>SENSOR-NAME</sensor-group-id>

<sensor-group-id>WORD</sensor-group-id>

</config>

<sensor-paths>

<sensor-path>

<path>SENSOR-PATH</path>

</config>

</sensor-path>

</sensor-paths>

</sensor-group>

</sensor-groups>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

sensor-path SENSOR-PATH

Configure vrf name

Unique identifier for the destination group

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: group-id

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<destination-groups>

<destination-group>

<group-id>TUNNEL-NAME</group-id>

<group-id>WORD</group-id>

</config>

</destination-group>

</destination-groups>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

destination-group TUNNEL-NAME (vrf (management|NAME)|)

Configure destination port

Reference to the port number of the stream destination

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: destination-port

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<destination-groups>

<destination-group>

<group-id>TUNNEL-NAME</group-id>

<group-id>WORD</group-id>

</config>

<destination-port>1</destination-port>

<destination-port>1</destination-port>

<destination-address>A.B.C.D</destination-address>

</config>

<destination-address>A.B.C.D</destination-address>

</destination>

</destinations>

</destination-group>

</destination-groups>

</vrf>

</vrfs>

</telemetry-system>

Command Syntax

tunnel-server ip A.B.C.D port <1-65535>

Configure gnmi severity

device’s debug telemetry severity level

Attribute Name: gnmi-severity

Default Value: error

Attribute Name: gnmi-debug

Attribute Type: empty

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<debug>

</gnmi-debug>

<gnmi-severity>error</gnmi-severity>

</config>

</debug>

</telemetry-system>

Command Syntax

Configure gnmi debug

Enable or Disable device’s debug telemetry

Attribute Name: gnmi-debug

Attribute Type: empty

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<debug>

</gnmi-debug>

</config>

</debug>

</telemetry-system>

Command Syntax

debug telemetry gnmi enable

Configure enable cpu limit

Enable CPU monitoring for streaming telemetry

Attribute Name: enable-cpu-limit

Attribute Type: enum (enable|disable)

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<cpu-monitoring>

<enable-cpu-limit>enable</enable-cpu-limit>

</config>

</cpu-monitoring>

</telemetry-system>

Command Syntax

telemetry cpu-monitor (enable)

Configure cpu-monitoring enable-cpu-limit

Enable CPU monitoring for streaming telemetry

Attribute Name: enable-cpu-limit

Attribute Type: enum (enable|disable)

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<cpu-monitoring>

<enable-cpu-limit>enable</enable-cpu-limit>

</config>

</cpu-monitoring>

</telemetry-system>

Command Syntax

telemetry cpu-monitor (disable)

Configure suppress threshold

Set CPU threshold for suppressing active streaming

Attribute Name: suppress-threshold

Attribute Type: uint16

Default Value: 40

Attribute Range: 20-80

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<cpu-monitoring>

<suppress-threshold>20</suppress-threshold>

</config>

</cpu-monitoring>

</telemetry-system>

Command Syntax

suppress-threshold <20-80>

Configure no-suppress-grps sensor-group-id

Reference to the sensor group which is used in the profile

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: sensor-group-id

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<telemetry-system xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-streaming-telemetry">

<cpu-monitoring>

<no-suppress-grps>

<no-suppress-grp>

<sensor-group-id>SENSOR-GROUP</sensor-group-id>

<sensor-group-id>SENSOR-GROUP</sensor-group-id>

<vrf-name>management</vrf-name>

</config>

<vrf-name>management</vrf-name>

</no-suppress-grp>

</no-suppress-grps>

</cpu-monitoring>

</telemetry-system>

Command Syntax

do-not-suppress (vrf (management|NAME)|) sensor-group-id SENSOR-GROUP

IPI-MANAGEMENT-SERVER-NOTIFICATION

Configure severity

If notification enabled, all the notifications having severity higher than or equal to this severity allowed.If notification disabled, all the notifications having severity lower than or equal to this severity not allowed

Attribute Name: severity

Default Value: all

Attribute Name: enable

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<management-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-management-server">

<module-notifications>

<module-notification>

<module-name>auth</module-name>

<module-name>auth</module-name>

<enable>enable</enable>

</config>

</module-notification>

</module-notifications>

</management-server>

Command Syntax

module (auth|bgp|cmm|hostp|hsl|isis|lag|l2mrib|mstp|mrib|nsm|onm|oam|ospf|ospf6|rip|pim|rib|vrrp|sflow|pserv|cml|ndd|ripng|vlog|all|udld) notification (disable|enable) (severity (all|info|warning|minor|major|critical)|)

IPI-VRF

Configure instance name

Network Instance Name. For VRF and MAC VRF, instance name can be up to 32 chars long. For VPWS and VPLS instances, instance name can be up to 128 chars long. For L2NI (bridge) instance, instance name has to be a number between (1-32). For Cross-Connect, instance name can be up to 30 chars long. For Bridge-domain, instance, instance name has to be a number between (1-2147483647).

Attribute Name: instance-name

Attribute Type: string

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>vrf</instance-type>

<instance-type>vrf</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<vrf>

<vrf-name>WORD</vrf-name>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

ip vrf WORD

Configure instance type

Attribute Name: instance-name

Attribute Type: string

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>mac-vrf</instance-type>

<instance-type>mac-vrf</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<vrf>

<vrf-name>WORD</vrf-name>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

mac vrf WORD

Configure description

VRF-specific description

Attribute Name: description

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

description LINE

Configure router id

VRF Router ID

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<router-id>A.B.C.D</router-id>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

router-id A.B.C.D

Configure evpn layer3 network id

L3 EVPN Identifier

Attribute Name: evpn-layer3-network-id

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<evpn-layer3-network-id>1</evpn-layer3-network-id>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

l3vni <1-16777215>

Configure mtu

This attribute is used to confiure the MTU on VRF

Attribute Name: mtu

Attribute Type: uint32

Attribute Range: 64-65535

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

</config>

</vrf>

</network-instance>

</network-instances>

Command Syntax

mtu <64-65535>

Configure snmp context name

Use this attribute to set the SNMP context for VRF.

This command is supported when following feature are enabled SNMP feature

Attribute Name: snmp-context-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<snmp>

<snmp-context-name>WORD</snmp-context-name>

</config>

</snmp>

</vrf>

</network-instance>

</network-instances>

Command Syntax

snmp context-name WORD

clear router-id

Netconf RPC payload

<clear-default-router-id xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrf"/>

Command Syntax

clear router-id

clear router-id vrf (VRFNAME|)

Attribute Name: vrfName

Attribute Type: string

Netconf RPC payload

<clear-vrf-router-id xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrf">

<vrfName>VRFNAME</vrfName>

</clear-vrf-router-id>

Command Syntax

clear router-id vrf (VRFNAME|)

IPI-INTERFACE

Configure name

The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device’s ‘console’. This might be a text name, such as ‘le0’ or a simple port number, such as ‘1’, depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of name. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of name for such an interface is the proxied device’s local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.

Attribute Name: name

Attribute Type: string

Attribute Range: 1-49

Attribute Name: enable-switchport

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</enable-switchport>

</config>

</interface>

</interfaces>

Command Syntax

interface IFNAME (switchport|)

Configure enable switchport

This attribute is used to set the mode of the Hybrid Switch Router feature to switched only.All interfaces are configured routed by default

Attribute Name: enable-switchport

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</enable-switchport>

</interface>

</interfaces>

Command Syntax

switchport

Configure vrf name

This attribute is used to associates an interface with a VRF

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<vrf-name>WORD</vrf-name>

</interface>

</interfaces>

Command Syntax

ip vrf forwarding WORD

Configure vr name

This attribute is used to associates an interface with a VR

Attribute Name: vr-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<vr-name>WORD</vr-name>

</interface>

</interfaces>

Command Syntax

virtual-router forwarding WORD

Configure mtu

This attribute is used to set mtu value to interface.The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.

Attribute Name: mtu

Attribute Type: uint32

Attribute Range: 64-65535

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</interface>

</interfaces>

Command Syntax

mtu <64-65535>

Configure allow first frame

This Object is used to allow or drop first frame on L2 movement actions

Attribute Name: allow-first-frame

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</allow-first-frame>

</interface>

</interfaces>

Command Syntax

l2 move-allow-first-frame

Configure dot1ad ether type

This attribute is used to configure the ethertype value for the interface in the format 0xhhhh. Currently supported values are 0x8100 (default) or 0x88a8 or 0x9100 or 0x9200.

Attribute Name: dot1ad-ether-type

Attribute Type: string

Attribute Range: 6-6

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<dot1ad-ether-type>ETHERTYPE</dot1ad-ether-type>

</interface>

</interfaces>

Command Syntax

dot1ad ethertype ETHERTYPE

Configure phy link training

This attribute is used to enable port link training

Attribute Name: phy-link-training

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<phy-link-training>disable</phy-link-training>

</interface>

</interfaces>

Command Syntax

phy link-training (disable|enable)

Configure phy dfe

This attribute is used to enable port decision feedback equalizer(dfe)

Attribute Name: phy-dfe

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<phy-dfe>disable</phy-dfe>

</interface>

</interfaces>

Command Syntax

phy dfe (disable|enable)

Configure phy unreliable los

This attribute is used to enable port unreliable loss of signal(los)

Attribute Name: phy-unreliable-los

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<phy-unreliable-los>disable</phy-unreliable-los>

</interface>

</interfaces>

Command Syntax

phy unreliable-los (disable|enable)

Configure description

Use this attribute to set description for the interface

Attribute Name: description

Attribute Type: string

Attribute Range: 1-128

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</interface>

</interfaces>

Command Syntax

description LINE

Configure shutdown

Use this attribute to enable the selected interface. This leaf contains the configured, desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).

Attribute Name: shutdown

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</shutdown>

</interface>

</interfaces>

Command Syntax

shutdown

Configure if loopback

This attribute is used to enable port loopback

Attribute Name: if-loopback

Attribute Type: enum (tx|rx)

Attribute Name: if-loopback-level

Attribute Type: enum (mac|phy)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<interface-loopback>

<if-loopback-level>mac</if-loopback-level>

<if-loopback>tx</if-loopback>

</config>

</interface-loopback>

</interface>

</interfaces>

Command Syntax

loopback (tx|rx) (mac|phy)

clear interface (IFNAME|) counters

Attribute Name: name

Attribute Type: string

Netconf RPC payload

<clear-interface-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-interface">

<name>IFNAME</name>

</clear-interface-counters>

Command Syntax

clear interface (IFNAME|) counters

IPI-IF-ETHERNET

Configure duplex mode

Use this attribute to set the duplex mode for the interface. Auto-negotiation if enabled, is turned off when duplex mode is set for the interface. When auto-negotiation is enabled, the interface should negotiate the duplex mode directly (typically full-duplex).

Attribute Name: duplex-mode

Attribute Type: enum (half|full)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<duplex-mode>half</duplex-mode>

</config>

</ethernet>

</interface>

</interfaces>

Command Syntax

duplex (half|full)

Configure mac address

Use this attribute to set the mac address for an interface. If not specified, the corresponding operational state leaf is expected to show the system-assigned MAC address.

Attribute Name: mac-address

Attribute Type: string

Attribute Range: 1-20

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<mac-address>MAC</mac-address>

</config>

</ethernet>

</interface>

</interfaces>

Command Syntax

mac-address (MAC|use-physical)

Configure secondary mac address

Use this attribute to set the secondary mac address for an interface to terminate L3 packets.

Attribute Name: secondary-mac-address

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</secondary-mac-address>

</config>

</ethernet>

</interface>

</interfaces>

Command Syntax

mac-address secondary peer-mlag

Configure port speed

This attribute is used to set the link speed for the interface. To enable auto-negotiation for the interface, set this attribute to value auto. When auto-negotiation is enabled, it is expected that the interface will select the highest speed available based on negotiation. When auto-negotiation is not enabled, sets the link speed to a fixed value -- supported values are defined by IF_INTERFACE_SPEED_T enum. When limited auto-negotiation is required, select the speed after the auto option. With this only the specified speed will be advertised and interface will negotiate with peer with that speed only.

Attribute Name: port-speed

Attribute Type: enum (10m|100m|1g|2.5g|10g|20g|25g|40g|50g|100g|200g|400g|auto|auto 10m|auto 100m|auto 1g)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-speed>10m</port-speed>

</config>

</ethernet>

</interface>

</interfaces>

Command Syntax

speed (10m|100m|1g|2.5g|10g|20g|25g|40g|50g|100g|200g|400g|auto|auto 10m|auto 100m|auto 1g)

Configure enable rcv

This command is supported when following feature are enabled L2 feature

Attribute Name: name

Attribute Type: string

Attribute Name: enable-rcv

Attribute Type: enum (off|on)

Attribute Name: enable-snd

Attribute Type: enum (off|on)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<flow-control>

<enable-rcv>off</enable-rcv>

<enable-snd>off</enable-snd>

</config>

</flow-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

flowcontrol both

Configure enable rcv

This attribute is used to show flow control on receive

This command is supported when following feature are enabled L2 feature

Attribute Name: enable-rcv

Attribute Type: enum (off|on)

Default Value: off

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<flow-control>

<enable-rcv>off</enable-rcv>

</config>

</flow-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

flowcontrol receive (off|on)

Configure enable snd

This attribute is used to show flow control on send

This command is supported when following feature are enabled L2 feature

Attribute Name: enable-snd

Attribute Type: enum (off|on)

Default Value: off

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<flow-control>

<enable-snd>off</enable-snd>

</config>

</flow-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

flowcontrol send (off|on)

IPI-IF-IP

Configure primary ip addr

Use this attribute to specify that an IP address and prefix length will be used by this interface. If the secondary parameter is not specified, this attribute overwrites the primary IP address. If the secondary parameter is specified, this attribute adds a new IP address to the interface. The secondary address cannot be configured in the absence of a primary IP address. The primary address cannot be removed when a secondary address is present.

Attribute Name: primary-ip-addr

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<primary-ip-addr>A.B.C.D/M|A.B.C.D A.B.C.D</primary-ip-addr>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D)

Configure enable dhcp ip address

Use this attribute to specify that a DHCP client will be used to obtain an IP address for an interface.

Attribute Name: enable-dhcp-ip-address

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</enable-dhcp-ip-address>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address dhcp

Configure ip addr label

Label of this address.

Attribute Name: ip-addr-label

Attribute Type: string

Default Value: NULL

Attribute Name: primary-ip-addr

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<primary-ip-addr>A.B.C.D/M|A.B.C.D A.B.C.D</primary-ip-addr>

<ip-addr-label>LINE</ip-addr-label>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D) label LINE

Configure ipv4 unnumbered if name

This attribute is used to Enable IP processing without an explicit address

Attribute Name: ipv4-unnumbered-if-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<ipv4-unnumbered-if-name>IFNAME</ipv4-unnumbered-if-name>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip unnumbered IFNAME

Configure remote address

This attribute is used to set the remote address of the PPP link

Attribute Name: remote-address

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<remote-address>A.B.C.D/M</remote-address>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip remote-address A.B.C.D/M

Configure primary anycast

Use this attribute to set the anycast flag for the IPv4 primary address of an interface.

Attribute Name: primary-anycast

Attribute Type: empty

Attribute Name: primary-ip-addr

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<primary-ip-addr>A.B.C.D/M|A.B.C.D A.B.C.D</primary-ip-addr>

</primary-anycast>

</config>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D) anycast

Configure ip address

Use this attribute to specify a secondary IP address that will be used by this interface. The secondary address cannot be configured in the absence of a primary IP address. The primary address cannot be removed when a secondary address is present.

Attribute Name: ip-address

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<secondary-addresses>

<ip-address>A.B.C.D/M|A.B.C.D A.B.C.D</ip-address>

<ip-address>A.B.C.D/M|A.B.C.D A.B.C.D</ip-address>

</config>

</secondary-addresses>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D) secondary

Configure ip label

Use this attribute to specify a descriptive label for this IPv4 address.

Attribute Name: ip-label

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<secondary-addresses>

<ip-address>A.B.C.D/M|A.B.C.D A.B.C.D</ip-address>

<ip-address>A.B.C.D/M</ip-address>

</config>

<ip-label>LINE</ip-label>

</secondary-addresses>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D) secondary label LINE

Configure secondary anycast

Use this attribute to set the anycast flag for the IPv4 secondary address of an interface.

Attribute Name: secondary-anycast

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<secondary-addresses>

<ip-address>A.B.C.D/M|A.B.C.D A.B.C.D</ip-address>

<ip-address>A.B.C.D/M</ip-address>

</config>

</secondary-anycast>

</secondary-addresses>

</ipv4>

</interface>

</interfaces>

Command Syntax

ip address (A.B.C.D/M|A.B.C.D A.B.C.D) secondary anycast

Configure enable auto config

Use this attribute to enable autoconfiguration of IPv6 address in host interface. IPv6 address are formed using the Prefix learned from RA and suffix formed using EUI-64 method.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: enable-auto-config

Attribute Type: boolean

Attribute Name: max-autoconfig-address

Attribute Type: uint8

Attribute Range: 1-64

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<max-autoconfig-address>1</max-autoconfig-address>

<enable-auto-config>true</enable-auto-config>

</config>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 address autoconfig (max-address <1-64>|)

Configure ipv6 unnumbered if name

Use this attribute to enable IP processing without an explicit address

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-unnumbered-if-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<ipv6-unnumbered-if-name>IFNAME</ipv6-unnumbered-if-name>

</config>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 unnumbered IFNAME

Configure enable dhcp ipv6 address

Use this attribute to specify that a DHCP client will be used to obtain an IP address for an interface.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: enable-dhcp-ipv6-address

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</enable-dhcp-ipv6-address>

</config>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 address dhcp

Configure enable dhcp temporary ipv6 address

Use this attribute to specify that a DHCP client will be used to obtain an temporary IP address for an interface.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: enable-dhcp-temporary-ipv6-address

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</enable-dhcp-temporary-ipv6-address>

</config>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 address dhcp temporary

Configure dhcp address prefix length

Use this attribute to configure the prefix length for the dynamically learnt ipv6 address

This command is supported when following feature are enabled IPV6 feature

Attribute Name: dhcp-address-prefix-length

Attribute Type: uint8

Attribute Range: 1-128

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<dhcp-address-prefix-length>1</dhcp-address-prefix-length>

</config>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 dhcp address-prefix-length <1-128>

Configure ipv6 address

Use this attribute to set the IPv6 address of an interface

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-address

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<ipv6-address>X:X::X:X/M</ipv6-address>

<ipv6-address>X:X::X:X/M</ipv6-address>

</config>

</addresses>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 address X:X::X:X/M

Configure anycast

Use this attribute to set the anycast flag for the IPv6 address of an interface. Anycast flag cannot be deleted for an IPv6 address once set. Please delete IPv6 address and reconfigure to remove anycast property.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: anycast

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<ipv6-address>X:X::X:X/M</ipv6-address>

<ipv6-address>X:X::X:X/M</ipv6-address>

</config>

</anycast>

</addresses>

</ipv6>

</interface>

</interfaces>

Command Syntax

ipv6 address X:X::X:X/M anycast

Configure disable ip forwarding

Enable IP forwarding for the router

Attribute Name: disable-ip-forwarding

Attribute Type: uint8

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

</disable-ip-forwarding>

</config>

</ip-global>

Command Syntax

no ip forwarding

Configure disable ipv6 forwarding

Enable IPv6 forwarding for the router

Attribute Name: disable-ipv6-forwarding

Attribute Type: uint8

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

</disable-ipv6-forwarding>

</config>

</ip-global>

Command Syntax

no ipv6 forwarding

Configure router id

Router id of the router - an unsigned 32-bit integer expressed in dotted quad notation

Attribute Name: router-id

Attribute Type: string

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

<router-id>A.B.C.D</router-id>

</config>

</ip-global>

Command Syntax

router-id A.B.C.D

Configure enable auto router id selection

Turn on Automatic Selection of Router ID

Attribute Name: enable-auto-router-id-selection

Attribute Type: empty

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

</enable-auto-router-id-selection>

</config>

</ip-global>

Command Syntax

automatic-router-id-selection enable

Configure default vrf enable icmp broadcast

This attribute is used to control ICMP echo broadcast reply. It ignores ICMP echo broacast when set to true

Attribute Name: default-vrf-enable-icmp-broadcast

Attribute Type: empty

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

</default-vrf-enable-icmp-broadcast>

</config>

</ip-global>

Command Syntax

ip icmp-broadcast

Configure disable ip vrf forwarding

Turn on IP forwarding for the VRF instance

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: disable-ip-vrf-forwarding

Attribute Type: uint8

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</disable-ip-vrf-forwarding>

</vrf>

</ip-global>

Command Syntax

no ip forwarding vrf NAME

Configure disable ipv6 vrf forwarding

Turn on IPv6 forwarding for the VRF instance

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: disable-ipv6-vrf-forwarding

Attribute Type: uint8

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</disable-ipv6-vrf-forwarding>

</vrf>

</ip-global>

Command Syntax

no ipv6 forwarding vrf NAME

Configure enable icmp broadcast

This attribute is used to control ICMP echo broadcast reply for VRF instance. It ignores ICMP echo broacast when set to true

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: enable-icmp-broadcast

Attribute Type: empty

Netconf edit-config payload

<ip-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-ip">

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-icmp-broadcast>

</vrf>

</ip-global>

Command Syntax

ip icmp-broadcast vrf NAME

IPI-IF-EXTENDED

Configure protected port

Attribute to change port protectedtype value

Attribute Name: protected-port

Attribute Type: enum (community|isolated|promiscuous)

Default Value: promiscuous

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<protected-port>promiscuous</protected-port>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

switchport protected (isolated|promiscuous)

Configure name

Attribute to change port protectedtype value

Attribute Name: protected-port

Attribute Type: enum (community|isolated|promiscuous)

Default Value: promiscuous

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<protected-port>promiscuous</protected-port>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

switchport protected (community|isolated|promiscuous)

Configure extended protected-port

Attribute to change port protectedtype value

Attribute Name: protected-port

Attribute Type: enum (community|isolated|promiscuous)

Default Value: promiscuous

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<protected-port>promiscuous</protected-port>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

switchport protected (community|promiscuous)

Configure link flap error disable

This object specifies whether the interface is enabled for link-flap error-disable or not. If this is ’0’, then interface is not enabled. Otherwise it is enabled.

Attribute Name: link-flap-error-disable

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</link-flap-error-disable>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

no link-flap errdisable

Configure storm control error disable

This attribute specifies whether the interface is enabled for storm-control error-disable or not. If this is not set, then the interface is not enabled. Otherwise it is enabled.

Attribute Name: storm-control-error-disable

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</storm-control-error-disable>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

no storm-control errdisable

Configure mac move limit error disable

This object specifies whether the interface is enabled for mac-move-limit error-disable or not. If this is ’0’, then interface is not enabled. Otherwise it is enabled.

Attribute Name: mac-move-limit-error-disable

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</mac-move-limit-error-disable>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

no mac-move-limit errdisable

Configure disable snmp trap link status

This Object is used to set the snmp trap link status in an interface

Attribute Name: disable-snmp-trap-link-status

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</disable-snmp-trap-link-status>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

no snmp trap link-status

Configure mac move priority

This object used to set the priority of mac-move of an interface

Attribute Name: mac-move-priority

Attribute Type: uint32

Attribute Range: 1-255

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<mac-move-priority>1</mac-move-priority>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

mac-move-limit priority <1-255>

Configure mau default type

This attribute is used to set the mau type in an interface

Attribute Name: mau-default-type

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<mau-default-type>dot3MauType10BaseTHD</mau-default-type>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

Configure debounce time

Use this attribute to set the interface debounce timer value

Attribute Name: debounce-time

Attribute Type: uint16

Attribute Range: 0-5000

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<debounce-time>0</debounce-time>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

debounce-time <0-5000>

Configure ucmp port

To enable UCMP support.

Attribute Name: ucmp-port

Attribute Type: enum (enable)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<ucmp-port>enable</ucmp-port>

</config>

</extended>

</interface>

</interfaces>

Command Syntax

ucmp (enable)

Configure enable re routing

Enable re-routing when the bandwidth crosses down the minimum bandwidth

Attribute Name: enable-re-routing

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<bandwidth-management>

</enable-re-routing>

</config>

</bandwidth-management>

</extended>

</interface>

</interfaces>

Command Syntax

re-routing

Configure enable speed

This object is used to enable port-monitoring for the specified parameters, average speed of the interface

Attribute Name: enable-speed

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-monitor>

</enable-speed>

</config>

</port-monitor>

</extended>

</interface>

</interfaces>

Command Syntax

monitor speed

Configure enable queue drops

This object is used to enable queue-drops of the interface

Attribute Name: enable-queue-drops

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-monitor>

</enable-queue-drops>

</config>

</port-monitor>

</extended>

</interface>

</interfaces>

Command Syntax

monitor queue-drops

Configure warning threshold

This object is used to specify warning threshold for port speed monitor. Warning threshold must be greater than recovery threshold. Default value of warning-threshold is 90.

Attribute Name: warning-threshold

Attribute Type: uint8

Attribute Range: 1-100

Attribute Name: recovery-threshold

Attribute Type: uint8

Attribute Range: 1-100

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-monitor>

<port-monitor-threshold>

<recovery-threshold>1</recovery-threshold>

<warning-threshold>1</warning-threshold>

</config>

</port-monitor-threshold>

</port-monitor>

</extended>

</interface>

</interfaces>

Command Syntax

monitor speed threshold warning <1-100> recovery <1-100>

Configure aclif type

Use this attribute to set the Hardware timestamp

Attribute Name: aclif-type

Attribute Type: enum (failover|no-failover)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<aclif>

<aclif-type>failover</aclif-type>

</config>

</aclif>

</extended>

</interface>

</interfaces>

Command Syntax

aclif (failover|no-failover)

Configure linkup debounce time

Link debounce timer value for down-up transition

Attribute Name: linkup-debounce-time

Attribute Type: uint16

Attribute Range: 0-5000

Attribute Name: linkdown-debounce-time

Attribute Type: uint16

Attribute Range: 0-5000

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<linkdown-debounce-time>0</linkdown-debounce-time>

<linkup-debounce-time>0</linkup-debounce-time>

</config>

</link-debounce-time>

</extended>

</interface>

</interfaces>

Command Syntax

link-debounce-time <0-5000> <0-5000>

Configure l2cp type

This attribute is used to configure the layer2 control-protocol type

This command is supported when following feature are enabled Layer-2 feature

Attribute Name: l2cp-type

Attribute Name: protocol-process

Attribute Type: enum (peer|tunnel|discard)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<l2-control-protocol>

<l2cp-type>stp</l2cp-type>

<l2cp-type>stp</l2cp-type>

<protocol-process>peer</protocol-process>

</config>

</l2-control-protocol>

</extended>

</interface>

</interfaces>

Command Syntax

Configure forward err correction

This Object is used to set forward-error-correction to interface

Attribute Name: forward-err-correction

Default Value: auto

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<extended-ethernet xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<forward-err-correction>auto</forward-err-correction>

</config>

</extended-ethernet>

</ethernet>

</interface>

</interfaces>

Command Syntax

Configure load interval

This attribute is used to configure load interval period in multiples of 30 seconds

Attribute Name: load-interval

Attribute Type: uint16

Default Value: 300

Attribute Range: 30-300

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<extended-ethernet xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<load-interval>30</load-interval>

</config>

</extended-ethernet>

</ethernet>

</interface>

</interfaces>

Command Syntax

load-interval <30-300>

Configure bcast value

This attribute is used to set the storm control configuration, Set Broadcast Rate Limiting of layer2 Interface

This command is supported when following feature are enabled rate limit feature

Attribute Name: bcast-value

Attribute Type: union

Attribute Name: bcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: bcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<bcast-rate-limit-format>0</bcast-rate-limit-format>

<bcast-burst-value>32</bcast-burst-value>

<bcast-value>LEVEL</bcast-value>

</config>

</broadcast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control broadcast level LEVEL (burst-size <32-128000>|)

Configure bcast rate limit format

This attribute is used to set the storm control configuration, Set the format for units in kbps|mbps|gbps or level for threshold percentage

This command is supported when following feature are enabled rate limit feature

Attribute Name: bcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: bcast-value

Attribute Type: union

Attribute Name: bcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<bcast-value>0</bcast-value>

<bcast-burst-value>32</bcast-burst-value>

<bcast-rate-limit-format>level</bcast-rate-limit-format>

</config>

</broadcast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control broadcast <0-4294967294> (kbps|mbps|gbps|fps) (burst-size <32-128000>|)

Configure mcast value

This attribute is used to set the storm control configuration,Set Multicast Rate Limiting of layer2 Interface

This command is supported when following feature are enabled rate limit feature

Attribute Name: mcast-value

Attribute Type: union

Attribute Name: mcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: mcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<mcast-rate-limit-format>0</mcast-rate-limit-format>

<mcast-burst-value>32</mcast-burst-value>

<mcast-value>LEVEL</mcast-value>

</config>

</multicast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control multicast level LEVEL (burst-size <32-128000>|)

Configure mcast rate limit format

This attribute is used to set the storm control configuration, Set the format for units in kbps|mbps|gbps or level for threshold percentage

This command is supported when following feature are enabled rate limit feature

Attribute Name: mcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: mcast-value

Attribute Type: union

Attribute Name: mcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<mcast-value>0</mcast-value>

<mcast-burst-value>32</mcast-burst-value>

<mcast-rate-limit-format>level</mcast-rate-limit-format>

</config>

</multicast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control multicast <0-4294967294> (kbps|mbps|gbps|fps) (burst-size <32-128000>|)

Configure dlf bcast value

This attribute is used to set the storm control configuration,Set DLF Broadcast Rate Limiting of layer2 Interface

This command is supported when following feature are enabled rate limit feature

Attribute Name: dlf-bcast-value

Attribute Type: union

Attribute Name: dlf-bcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: dlf-bcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<dlf-broadcast>

<dlf-bcast-rate-limit-format>0</dlf-bcast-rate-limit-format>

<dlf-bcast-burst-value>32</dlf-bcast-burst-value>

<dlf-bcast-value>LEVEL</dlf-bcast-value>

</config>

</dlf-broadcast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control dlf level LEVEL (burst-size <32-128000>|)

Configure dlf bcast rate limit format

This attribute is used to set the storm control configuration, Set the format for units in kbps|mbps|gbps or level for threshold percentage

This command is supported when following feature are enabled rate limit feature

Attribute Name: dlf-bcast-rate-limit-format

Attribute Type: enum (level|kbps|mbps|gbps|fps)

Attribute Name: dlf-bcast-value

Attribute Type: union

Attribute Name: dlf-bcast-burst-value

Attribute Type: uint32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<storm-control xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<dlf-broadcast>

<dlf-bcast-value>0</dlf-bcast-value>

<dlf-bcast-burst-value>32</dlf-bcast-burst-value>

<dlf-bcast-rate-limit-format>level</dlf-bcast-rate-limit-format>

</config>

</dlf-broadcast>

</storm-control>

</ethernet>

</interface>

</interfaces>

Command Syntax

storm-control dlf <0-4294967294> (kbps|mbps|gbps|fps) (burst-size <32-128000>|)

Configure global load-interval

This attribute is used to configure load interval on all interfaces and its set period in multiples of 30 seconds

Attribute Name: load-interval

Attribute Type: uint16

Default Value: 300

Attribute Range: 30-300

Netconf edit-config payload

<load-interval>30</load-interval>

</config>

</global>

</interfaces>

Command Syntax

default-interface load-interval <30-300>

Configure error disable stp bpdu guard

This object is used to configure error disable STP BPDU Guard

Attribute Name: error-disable-stp-bpdu-guard

Attribute Type: boolean

Netconf edit-config payload

<error-disable>

<error-disable-stp-bpdu-guard>true</error-disable-stp-bpdu-guard>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

no errdisable cause stp-bpdu-guard

Configure reason

This object is to enable various error-disable reasons like lag-mismatch, stp-bpdu-guard, link-flap and loopback-detection. As the datatype is BITS, 0th bit corresponds to lag-mismatch, 1st bit corresponds to stp-bpdu-guard, 2nd bit corresponds to link-flap

Attribute Name: reason

Attribute Type: bits (lag-mismatch|link-flap|mac-move-limit|storm-control)

Attribute Name: error-disable-stp-bpdu-guard

Attribute Type: boolean

Netconf edit-config payload

<error-disable>

<error-disable-stp-bpdu-guard>true</error-disable-stp-bpdu-guard>

<reason>lag-mismatch</reason>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable cause stp-bpdu-guard {lag-mismatch|link-flap|mac-move-limit|storm-control}

Configure link flap timer interval

This object is configure timer interval for link-flap timer

Attribute Name: link-flap-timer-interval

Attribute Type: uint32

Attribute Range: 1-1800

Attribute Name: link-flap-max-count

Attribute Type: uint32

Attribute Range: 1-100

Netconf edit-config payload

<error-disable>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable link-flap-setting max-flaps <1-100> time <1-1800>

Configure storm control timer interval

This attribute is configure timer interval for storm-control timer

Attribute Name: storm-control-timer-interval

Attribute Type: uint32

Attribute Range: 1-1800

Attribute Name: storm-control-max-count

Attribute Type: uint32

Attribute Range: 1-100

Netconf edit-config payload

<error-disable>

<storm-control-max-count>1</storm-control-max-count>

<storm-control-timer-interval>1</storm-control-timer-interval>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable storm-control discard-hit <1-100> time <1-1800>

Configure error-disable reason

Attribute Name: reason

Attribute Type: bits (lag-mismatch|link-flap|mac-move-limit|storm-control)

Netconf edit-config payload

<error-disable>

<reason>lag-mismatch</reason>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable cause {lag-mismatch|link-flap|mac-move-limit|storm-control}

Configure error-disable error-disable-stp-bpdu-guard

This object is used to configure error disable STP BPDU Guard

Attribute Name: error-disable-stp-bpdu-guard

Attribute Type: boolean

Netconf edit-config payload

<error-disable>

<error-disable-stp-bpdu-guard>true</error-disable-stp-bpdu-guard>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable cause stp-bpdu-guard

Configure timeout interval

This object is to configure timeout for error-disable automatic recovery timer

Attribute Name: timeout-interval

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-1000000

Netconf edit-config payload

<error-disable>

<timeout-interval>0</timeout-interval>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable timeout interval <0-1000000>

Configure mac move limit

This object configures threshold for mac movement

Attribute Name: mac-move-limit

Attribute Type: uint32

Default Value: 100

Attribute Range: 1-1000

Netconf edit-config payload

<error-disable>

<mac-move-limit>1</mac-move-limit>

</config>

</error-disable>

</global>

</interfaces>

Command Syntax

errdisable mac-move-limit <1-1000>

Configure protocol process

This attribute is used to configure the layer2 control-protocol type

This command is supported when following feature are enabled Layer-2 feature

Attribute Name: l2cp-type

Attribute Name: protocol-process

Attribute Type: enum (peer|tunnel|discard)

Netconf edit-config payload

<l2-control-protocols>

<l2-control-protocol>

<l2cp-type>stp</l2cp-type>

<l2cp-type>stp</l2cp-type>

<protocol-process>peer</protocol-process>

</config>

</l2-control-protocol>

</l2-control-protocols>

</global>

</interfaces>

Command Syntax

Configure if type

Use this attribute to set the hardware interface type

Attribute Name: if-type

Attribute Name: mtu

Attribute Type: uint32

Attribute Range: 64-65535

Netconf edit-config payload

<mtus>

<if-type>eth-switchport</if-type>

<if-type>eth-switchport</if-type>

</config>

</mtu>

</mtus>

</global>

</interfaces>

Command Syntax

Configure mode

This attribute is used to unset the tunnel mode

This command is supported when following feature are enabled tunnel feature

Attribute Name: mode

Attribute Type: enum (vxlan)

Default Value: vxlan

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<mode>vxlan</mode>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel mode (vxlan)

Configure src

This attribute is used to set tunnel source

This command is supported when following feature are enabled tunnel feature

Attribute Name: src

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel source A.B.C.D

Configure multicast interface

This attribute is used to configure egress multicast interface for tunnel

This command is supported when following feature are enabled tunnel feature

Attribute Name: multicast-interface

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<multicast-interface>IFNAME</multicast-interface>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel egress-multicast-interface IFNAME

Configure dst

This attribute is used to set destination of tunnel packets

This command is supported when following feature are enabled tunnel feature

Attribute Name: dst

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel destination A.B.C.D

Configure checksum enable

This attribute is used to enable end to end checksumming of packets

This command is supported when following feature are enabled tunnel feature

Attribute Name: checksum-enable

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</checksum-enable>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel checksum

Configure tos byte

This attribute is used to set type of service byte

This command is supported when following feature are enabled tunnel feature

Attribute Name: tos-byte

Attribute Type: uint16

Attribute Range: 0-255

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<tos-byte>0</tos-byte>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel tos <0-255>

Configure ttl

This attribute is used to set time to live

This command is supported when following feature are enabled tunnel feature

Attribute Name: ttl

Attribute Type: uint16

Attribute Range: 1-255

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel ttl <1-255>

Configure path mtu enable

This attribute is used to enable Path MTU Discovery on tunnel

This command is supported when following feature are enabled tunnel feature

Attribute Name: path-mtu-enable

Attribute Type: empty

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

</path-mtu-enable>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel path-mtu-discovery

Configure dst mac address

This attribute is used to set next Hop Destination MAC Address of Tunnel Packets

This command is supported when following feature are enabled tunnel feature

Attribute Name: dst-mac-address

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<dst-mac-address>MAC</dst-mac-address>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel dmac MAC

Configure gre key

This attribute is used to set the gre-key for tunnel

This command is supported when following feature are enabled tunnel feature

Attribute Name: gre-key

Attribute Type: union

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<gre-key>IF_TUNNEL_KEY_T</gre-key>

</config>

</tunnel>

</interface>

</interfaces>

Command Syntax

tunnel key (A.B.C.D|<0-4294967295>)

Configure link scan timer

Link timer value at which device scans its network links to check their status

Attribute Name: link-scan-timer

Attribute Type: uint16

Attribute Range: 50-1000

Netconf edit-config payload

</config>

</link-scan>

Command Syntax

link-scan-timer <50-1000>

Configure hit based ageing

Use this attribute to set the mac ageing src or dst-src

Attribute Name: hit-based-ageing

Attribute Type: enum (src|dst-src)

Netconf edit-config payload

<mac-ageing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<hit-based-ageing>src</hit-based-ageing>

</config>

</mac-ageing>

Command Syntax

mac-ageing (src|dst-src)

clear interface (IFNAME|) cpu counters

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<clear-interface-cpu-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<if-name>IFNAME</if-name>

</clear-interface-cpu-counters>

Command Syntax

clear interface (IFNAME|) cpu counters

clear interface (IFNAME|) fec

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<clear-interface-forward-error-correction-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<if-name>IFNAME</if-name>

</clear-interface-forward-error-correction-counters>

Command Syntax

clear interface (IFNAME|) fec

clear interface IFNAME error-disable

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<clear-interface-error-disable xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<if-name>IFNAME</if-name>

</clear-interface-error-disable>

Command Syntax

clear interface IFNAME error-disable

Attribute Name: if-name

Attribute Type: string

Attribute Name: protocol

Attribute Type: enum (peer|tunnel|discard|tunnel-discard|all)

Default Value: all

Netconf RPC payload

<clear-l2protocol-interface-counter xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-extended">

<if-name>IFNAME</if-name>

</clear-l2protocol-interface-counter>

Command Syntax

IPI-SYSTEM

Configure hostname

Use this command to set the network name for the device. OcNOS uses this name in system prompts and default configuration filenames. Setting a host name using this command also sets the host name in the kernel.After giving the hostname command, you must write to memory using the write command. If you do not write to memory, the change made by this command (the new host name) is not set after the device reboots.

Attribute Name: hostname

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<system-info xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-system">

</config>

</system-info>

Command Syntax

hostname WORD

Configure disable

disable system request

Attribute Name: disable

Attribute Type: boolean

Default Value: true

Netconf edit-config payload

<system-info xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-system">

<sysrq>

</config>

</sysrq>

</system-info>

Command Syntax

sysrq disable

Configure timezone name

The attribute display timezone name used for the system

Attribute Name: timezone-name

Attribute Type: string

Netconf edit-config payload

<system-info xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-system">

<clock>

<timezone-name>WORD</timezone-name>

</config>

</clock>

</system-info>

Command Syntax

clock timezone WORD

IPI-NETWORK-SERVICES-MANAGER

Configure options

Use this attribute to debug nsm

Attribute Name: options

Netconf edit-config payload

<network-services-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<debug>

<nsm>

<options>addressmonitor</options>

</config>

</nsm>

</debug>

</network-services-manager>

Command Syntax

Configure pkt-mgr options

Use this attribute to debug vlan packet

Attribute Name: options

Netconf edit-config payload

<network-services-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<debug>

<pkt-mgr>

<options>l2 protocol cfm</options>

</config>

</pkt-mgr>

</debug>

</network-services-manager>

Command Syntax

Configure module name

Use this attribute to set debug HSL module

This command is supported when following feature are enabled HSL feature

Attribute Name: module-name

Attribute Type: enum (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy)

Attribute Name: level

Netconf edit-config payload

<network-services-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<debug>

<hsl>

<hsl-module>

<module-name>general</module-name>

<module-name>general</module-name>

</config>

</hsl-module>

</hsl>

</debug>

</network-services-manager>

Command Syntax

debug hsl (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy) {all|default|info|debug|warn|error|fatal|admin|counter|pkt}

Attribute Name: terminal-debug-options

Netconf RPC payload

<nsm-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<terminal-debug-options>addressmonitor</terminal-debug-options>

</nsm-terminal-debug-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<nsm-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<terminal-debug-options>addressmonitor</terminal-debug-options>

</nsm-terminal-debug-off>

Command Syntax

debug hsl (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy) {all|default|info|debug|warn|error|fatal|admin|counter|pkt}

Attribute Name: module-name

Attribute Type: enum (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy)

Attribute Name: level

Netconf RPC payload

<hsl-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<module-name>general</module-name>

</hsl-terminal-debug-on>

Command Syntax

debug hsl (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy) {all|default|info|debug|warn|error|fatal|admin|counter|pkt}

no debug hsl (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy) {all|default|info|debug|warn|error|fatal|admin|counter|pkt}

Attribute Name: module-name

Attribute Type: enum (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy)

Attribute Name: level

Netconf RPC payload

<hsl-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<module-name>general</module-name>

</hsl-terminal-debug-off>

Command Syntax

no debug hsl (general|ifmgr|bridge|msg|fib|fdb|devdrv|pktdrv|platform|pbr|bfd|lacp|qos|helper|rbridge|nvo|ofl|mlag|srv6|ptp|extphy) {all|default|info|debug|warn|error|fatal|admin|counter|pkt}

Attribute Name: terminal-debug-options

Netconf RPC payload

<pktmgr-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<terminal-debug-options>l2 protocol cfm</terminal-debug-options>

</pktmgr-terminal-debug-on>

Command Syntax

no debug pktmgr

Netconf RPC payload

<pktmgr-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

no debug pktmgr

debug pktmgr enable

Netconf RPC payload

<pktmgr-debug-statistics-enable xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

debug pktmgr enable

debug pktmgr disable

Netconf RPC payload

<pktmgr-debug-statistics-disable xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

debug pktmgr disable

debug pktmgr stats

Netconf RPC payload

<pktmgr-debug-statistics-get xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

debug pktmgr stats

debug pktmgr (stats|pkt-errors)

Attribute Name: debug-error-statistics

Attribute Type: enum (stats|pkt-errors)

Netconf RPC payload

<pktmgr-debug-error-statistics-get xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager">

<debug-error-statistics>stats</debug-error-statistics>

</pktmgr-debug-error-statistics-get>

Command Syntax

debug pktmgr (stats|pkt-errors)

clear nsm ipc stats

Netconf RPC payload

<clear-nsm-ipc-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

clear nsm ipc stats

clear nsm server ipc-stats

Netconf RPC payload

<clear-nsm-server-ipc-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

clear nsm server ipc-stats

snmp restart nsm

Netconf RPC payload

<nsm-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-services-manager"/>

Command Syntax

snmp restart nsm

IPI-BRIDGE

Configure enable

Use this attribute to enable global bridge vlan check

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<global-bridge-vlan-check xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

</enable>

</config>

</global>

</global-bridge-vlan-check>

Command Syntax

global-bridge-vlan-check enable

Configure protocol

Bridge protocol type

Attribute Name: protocol

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</config>

</bridge>

</network-instance>

</network-instances>

Command Syntax

Configure instance name

Bridge protocol type

Attribute Name: protocol

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</config>

</bridge>

</network-instance>

</network-instances>

Command Syntax

Configure disable dynamic learning

Attribute Name: instance-name

Attribute Type: string

Attribute Name: disable-dynamic-learning

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>vrf</instance-type>

<instance-type>vrf</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

</disable-dynamic-learning>

</config>

</bridge>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> acquire

Configure l2 protocol destination mac

This attribute changes L2 protocol destination MAC

Attribute Name: l2-protocol-destination-mac

Attribute Type: string

Default Value: 0100.C2CD.CDD0

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<l2-protocol-destination-mac>XXXX.XXXX.XXXX</l2-protocol-destination-mac>

</config>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> l2protocol encapsulation dest-mac XXXX.XXXX.XXXX

Configure spanning tree protocol status

Attribute specifies to enable/disable Spanning Tree Protocol on a interface

Attribute Name: spanning-tree-protocol-status

Attribute Type: enum (enable|disable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<spanning-tree-protocol-status>enable</spanning-tree-protocol-status>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> (spanning-tree (enable|disable)|)

Configure disable mac learning

Use this attribute to disable MAC learning on a interface

Attribute Name: disable-mac-learning

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<fdb>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</disable-mac-learning>

</interface>

</interfaces>

</fdb>

</bridge>

</network-instance>

</network-instances>

Command Syntax

no mac-address-table learning bridge <1-32> interface IFNAME

Configure interface name

The textual name of the interface

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: action

Attribute Type: enum (discard|forward)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<fdb>

<static-mac-table>

<entry>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<action>discard</action>

</config>

<interface-name>IFNAME</interface-name>

</entry>

</static-mac-table>

</fdb>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> address XXXX.XXXX.XXXX (discard|forward) IFNAME

clear mac address-table (multicast) cvlan VID svlan VID bridge <1-32>

Attribute Name: mac-type

Attribute Type: enum (multicast)

Attribute Name: cvlan-id

Attribute Type: uint16

Attribute Name: svlan-id

Attribute Type: uint16

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<bridge-clear-provider-edge-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<mac-type>multicast</mac-type>

<cvlan-id>VID</cvlan-id>

<svlan-id>VID</svlan-id>

<bridge-id>1</bridge-id>

</bridge-clear-provider-edge-mac-address-table>

Command Syntax

clear mac address-table (multicast) cvlan VID svlan VID bridge <1-32>

clear mac address-table (multicast) (interface IFNAME|) (address MACADDR|) (vlan VID|) bridge <1-32>

Attribute Name: mac-type

Attribute Type: enum (multicast)

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: mac-address

Attribute Type: string

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<bridge-clear-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<mac-type>multicast</mac-type>

<interface-name>IFNAME</interface-name>

<mac-address>MACADDR</mac-address>

<vlan-id>VID</vlan-id>

<bridge-id>1</bridge-id>

</bridge-clear-mac-address-table>

Command Syntax

clear mac address-table (multicast) (interface IFNAME|) (address MACADDR|) (vlan VID|) bridge <1-32>

clear mac address-table dynamic cvlan VID svlan VID bridge <1-32>

Attribute Name: cvlan-id

Attribute Type: uint16

Attribute Name: svlan-id

Attribute Type: uint16

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<bridge-clear-provider-edge-dynamic-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<cvlan-id>VID</cvlan-id>

<svlan-id>VID</svlan-id>

<bridge-id>1</bridge-id>

</bridge-clear-provider-edge-dynamic-mac-address-table>

Command Syntax

clear mac address-table dynamic cvlan VID svlan VID bridge <1-32>

clear mac address-table dynamic (interface IFNAME|) (address MACADDR|) (vlan VID|) bridge <1-32>

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: mac-address

Attribute Type: string

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<bridge-clear-dynamic-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<interface-name>IFNAME</interface-name>

<mac-address>MACADDR</mac-address>

<vlan-id>VID</vlan-id>

<bridge-id>1</bridge-id>

</bridge-clear-dynamic-mac-address-table>

Command Syntax

clear mac address-table dynamic (interface IFNAME|) (address MACADDR|) (vlan VID|) bridge <1-32>

clear allowed-ethertype statistics (IFNAME|)

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf RPC payload

<bridge-clear-allowed-ethertype-stats xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<interface-name>IFNAME</interface-name>

</bridge-clear-allowed-ethertype-stats>

Command Syntax

clear allowed-ethertype statistics (IFNAME|)

clear mac address-table dynamic interface IFNAME instance INST bridge <1-32>

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: instance-id

Attribute Type: uint32

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<bridge-clear-mstp-port-dynamic-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bridge">

<interface-name>IFNAME</interface-name>

<instance-id>INST</instance-id>

<bridge-id>1</bridge-id>

</bridge-clear-mstp-port-dynamic-mac-address-table>

Command Syntax

clear mac address-table dynamic interface IFNAME instance INST bridge <1-32>

IPI-VLAN

Configure disable mac learning

Use attribute to disable mac address learning

Attribute Name: disable-mac-learning

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

</disable-mac-learning>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

no mac-address-table learning bridge <1-32> vlan VLAN_RANGE

Configure vlan id

Vlan identifier

Attribute Name: vlan-id

Attribute Type: string

Attribute Range: 2-4094

Attribute Name: type

Attribute Type: enum (customer)

Attribute Name: name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: state

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

<customer-vlan>

<type>customer</type>

<state>disable</state>

</config>

</customer-vlan>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

vlan VLAN_RANGE (type (customer)|) bridge <1-32> (name WORD|) (state (disable|enable)|)

Configure type

Vlan identifier

This command is supported when following feature are enabled Provider Bridging feature

Attribute Name: vlan-id

Attribute Type: string

Attribute Range: 2-4094

Attribute Name: type

Attribute Type: enum (point-point|multipoint-multipoint|rooted-multipoint)

Attribute Name: state

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

<service-vlan>

<type>point-point</type>

<state>disable</state>

</config>

</service-vlan>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

vlan VLAN_RANGE type service (point-point|multipoint-multipoint|rooted-multipoint) bridge <1-32> (state (disable|enable)|)

Configure instance name

Vlan identifier

This command is supported when following feature are enabled Provider Bridging feature

Attribute Name: vlan-id

Attribute Type: string

Attribute Range: 2-4094

Attribute Name: type

Attribute Type: enum (point-point|multipoint-multipoint|rooted-multipoint)

Attribute Name: name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: state

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

<service-vlan>

<type>point-point</type>

<state>disable</state>

</config>

</service-vlan>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

vlan VLAN_RANGE type service (point-point|multipoint-multipoint|rooted-multipoint) bridge <1-32> name WORD (state (disable|enable)|)

Configure instance type

private vlan type

This command is supported when following feature are enabled PVLAN feature

Attribute Name: type

Attribute Type: enum (community|isolated|primary)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

<private-vlan>

<type>community</type>

</config>

</private-vlan>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

private-vlan <2-4094> (community|isolated|primary) bridge <1-32>

Configure secondary vlan

Use this attribute to configure associated secondary vlan for private vlan

This command is supported when following feature are enabled PVLAN feature

Attribute Name: secondary-vlan

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan>

<vlan-id>VLAN_RANGE</vlan-id>

<vlan-id>VLAN_RANGE</vlan-id>

</config>

<private-vlan>

<secondary-vlan>VLAN_ID</secondary-vlan>

</config>

</association>

</private-vlan>

</vlan>

</vlans>

</bridge>

</network-instance>

</network-instances>

Command Syntax

private-vlan <2-4094> association add VLAN_ID bridge <1-32>

Configure mac address

Use this attribute to configure classifier for given MAC address

This command is supported when following feature are enabled VLAN Classifier feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<vlan-classifier xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<classifier-rules>

<classifier-rule>

<rule-id>1</rule-id>

<rule-id>1</rule-id>

</config>

<rule-criteria>

<mac-address>WORD</mac-address>

</config>

</rule-criteria>

</classifier-rule>

</classifier-rules>

</vlan-classifier>

Command Syntax

vlan classifier rule <1-256> mac WORD

Configure ipv4 address

Use this attribute to configure classifier for given IPv4 address

This command is supported when following feature are enabled VLAN Classifier feature

Attribute Name: ipv4-address

Attribute Type: string

Netconf edit-config payload

<vlan-classifier xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<classifier-rules>

<classifier-rule>

<rule-id>1</rule-id>

<rule-id>1</rule-id>

</config>

<rule-criteria>

<ipv4-address>A.B.C.D/M</ipv4-address>

</config>

</rule-criteria>

</classifier-rule>

</classifier-rules>

</vlan-classifier>

Command Syntax

vlan classifier rule <1-256> ipv4 A.B.C.D/M

Configure ether type

Use this attribute to configure classifier for protocols based on Ethertype value

This command is supported when following feature are enabled VLAN Classifier feature

Attribute Name: ether-type

Attribute Type: union

Netconf edit-config payload

<vlan-classifier xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<classifier-rules>

<classifier-rule>

<rule-id>1</rule-id>

<rule-id>1</rule-id>

</config>

<rule-criteria>

<ether-type>VLAN_CLASSIFIER_ETHERTYPE_T</ether-type>

</config>

</rule-criteria>

</classifier-rule>

</classifier-rules>

</vlan-classifier>

Command Syntax

Configure group id

Classifier group ID

This command is supported when following feature are enabled VLAN Classifier feature

Attribute Name: group-id

Attribute Type: uint8

Attribute Range: 1-16

Netconf edit-config payload

<vlan-classifier xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<classifier-groups>

<classifier-group>

<rule-id>1</rule-id>

<rule-id>1</rule-id>

<group-id>1</group-id>

</config>

<group-id>1</group-id>

</classifier-group>

</classifier-groups>

</vlan-classifier>

Command Syntax

vlan classifier group <1-16> add rule <1-256>

Configure port name

VLAN classifier group ID

This command is supported when following feature are enabled VLAN Classifier feature

Attribute Name: group-id

Attribute Type: uint8

Attribute Range: 1-16

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Netconf edit-config payload

<vlan-classifier xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<ports>

<group-id>1</group-id>

<group-id>1</group-id>

<port-name>WORD</port-name>

<vlan-id>2</vlan-id>

</config>

<port-name>WORD</port-name>

</port>

</ports>

</vlan-classifier>

Command Syntax

vlan classifier activate <1-16> vlan <2-4094>

Configure vlan-reservation vlan-id

Use attribute to reserve vlan

This command is supported when following feature are enabled Flexport Feature and following feature are disabled dune feature

Attribute Name: vlan-id

Attribute Type: string

Attribute Range: 2-4094

Netconf edit-config payload

<vlan-reservation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<vlan-id>VLAN_RANGE</vlan-id>

</config>

</vlan-reservation>

Command Syntax

vlan-reservation VLAN_RANGE

Configure disable vlan classifier feature

Use this command to enable or disable VLAN classifier feature.

Attribute Name: disable-vlan-classifier-feature

Attribute Type: uint8

Netconf edit-config payload

<layer2-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

</disable-vlan-classifier-feature>

</config>

</layer2-global>

Command Syntax

no feature vlan classifier

Configure disable port security

Use this attribute to disable or enable port-security globally.

Attribute Name: disable-port-security

Attribute Type: uint8

Netconf edit-config payload

<layer2-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

</disable-port-security>

</config>

</layer2-global>

Command Syntax

port-security disable

Configure vlan xlate 1

Use this attribute to set vlan xlate

Attribute Name: vlan-xlate-1

Attribute Type: empty

Netconf edit-config payload

<layer2-global xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

</vlan-xlate-1>

</config>

</layer2-global>

Command Syntax

vlan-xlate-1 large

Configure table name

Use this to configure the name of the CVLAN registration table.

This command is supported when following feature are enabled VLAN feature,Provider Bridging feature

Attribute Name: table-name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<cvlan-registration-tables xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<cvlan-registration-table>

<table-name>WORD</table-name>

<table-name>WORD</table-name>

</config>

</cvlan-registration-table>

</cvlan-registration-tables>

</bridge>

</network-instance>

</network-instances>

Command Syntax

cvlan registration table WORD bridge <1-32>

Configure cvlan cfi

Canonical Format Indicator in the DEI field of the CTAG

This command is supported when following feature are enabled VLAN feature,Provider Bridging feature

Attribute Name: cvlan-cfi

Attribute Type: uint8

Attribute Range: 0-1

Attribute Name: translated-cvlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Attribute Name: svlan-cos

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: svlan-cfi

Attribute Type: uint8

Attribute Range: 0-1

Attribute Name: cvlan-cos

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<cvlan-registration-tables xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<cvlan-registration-table>

<table-name>WORD</table-name>

<table-name>WORD</table-name>

</config>

<cvlan-mappings>

<cvlan-mapping>

<cvlan-id>VLAN_RANGE2</cvlan-id>

<cvlan-id>VLAN_RANGE2</cvlan-id>

<svlan-id>1</svlan-id>

<translated-cvlan-id>1</translated-cvlan-id>

<svlan-cos>0</svlan-cos>

<svlan-cfi>0</svlan-cfi>

<cvlan-cos>0</cvlan-cos>

</config>

<svlan-id>1</svlan-id>

<cvlan-cfi>0</cvlan-cfi>

</cvlan-mapping>

</cvlan-mappings>

</cvlan-registration-table>

</cvlan-registration-tables>

</bridge>

</network-instance>

</network-instances>

Command Syntax

cvlan VLAN_RANGE2 cvlan <1-4094> svlan <1-4094> ({ scos <0-7>| scfi <0-1>| ccos <0-7>| ccfi <0-1> }|)

Configure untagged ep

Customer/provider edge port is untagged for specified CVLAN

This command is supported when following feature are enabled VLAN feature,Provider Bridging feature

Attribute Name: untagged-ep

Attribute Type: bits (default|untagged-pep|untagged-cep)

Attribute Name: svlan-cos

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: svlan-cfi

Attribute Type: uint8

Attribute Range: 0-1

Attribute Name: cvlan-cos

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: cvlan-cfi

Attribute Type: uint8

Attribute Range: 0-1

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<cvlan-registration-tables xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan">

<cvlan-registration-table>

<table-name>WORD</table-name>

<table-name>WORD</table-name>

</config>

<cvlan-mappings>

<cvlan-mapping>

<cvlan-id>VLAN_RANGE2</cvlan-id>

<cvlan-id>VLAN_RANGE2</cvlan-id>

<svlan-id>1</svlan-id>

<svlan-cos>0</svlan-cos>

<svlan-cfi>0</svlan-cfi>

<cvlan-cos>0</cvlan-cos>

<cvlan-cfi>0</cvlan-cfi>

</config>

<svlan-id>1</svlan-id>

<untagged-ep>untagged-pep</untagged-ep>

</cvlan-mapping>

</cvlan-mappings>

</cvlan-registration-table>

</cvlan-registration-tables>

</bridge>

</network-instance>

</network-instances>

Command Syntax

cvlan VLAN_RANGE2 svlan <1-4094> ({ scos <0-7>| scfi <0-1>| ccos <0-7>| ccfi <0-1>| untagged-pep|untagged-cep }|)

IPI-PORT-VLAN

Configure isolated vlan id

Isolated VLAN identifier

Attribute Name: isolated-vlan-id

Attribute Type: string

Attribute Range: 2-4094,2-4094

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<isolated-vlan-id>2</isolated-vlan-id>

</config>

</global>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (provider-network) isolated-vlan WORD

Configure cvlan registration table

cvlan registration table

Attribute Name: cvlan-registration-table

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<cvlan-registration-table>WORD</cvlan-registration-table>

</config>

</global>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-edge) vlan registration WORD

Configure interface mode

Set the interface to access or trunk or hybrid mode for VLANs

Attribute Name: interface-mode

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

Configure name

Set the interface to access or trunk or hybrid mode for VLANs

Attribute Name: interface-mode

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode (customer-network)

Configure acceptable frame type

Use this attribute to set the interface acceptable frame types. This processing occurs after VLAN classification

Attribute Name: acceptable-frame-type

Attribute Type: enum (vlan-tagged|all)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<acceptable-frame-type>all</acceptable-frame-type>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode (hybrid) acceptable-frame-type (vlan-tagged|all)

Configure switched-vlan acceptable-frame-type

Use this attribute to set the interface acceptable frame types. This processing occurs after VLAN classification

Attribute Name: acceptable-frame-type

Attribute Type: enum (vlan-tagged|all)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<acceptable-frame-type>all</acceptable-frame-type>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode (customer-edge hybrid) acceptable-frame-type (vlan-tagged|all)

Configure disable native vlan

Use this attribute to disable native VLAN for the port. Untagged frames will be dropped.

Attribute Name: disable-native-vlan

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

</disable-native-vlan>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode (trunk) disable-native-vlan

Configure remove default vlan

Use this attribute to remove default VLAN for the port. Untagged frames will be dropped.

Attribute Name: remove-default-vlan

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

</remove-default-vlan>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode (trunk) remove-default-vlan

Configure ingress filter

Use this attribute to set the switching characteristics of the interface as hybrid, and classify both tagged and untagged frames. Received frames are classified based on the VLAN characteristics, then accepted or discarded based on the specified filtering criteria.

Attribute Name: ingress-filter

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<ingress-filter>disable</ingress-filter>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

Configure vlan id

Default VLAN identifier

Attribute Name: vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<vlans>

<vlan-id>2</vlan-id>

</config>

</vlans>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (access|hybrid) vlan <2-4094>

Configure vlans vlan-id

Default VLAN identifier

Attribute Name: vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<vlans>

<vlan-id>2</vlan-id>

</config>

</vlans>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-network) vlan <2-4094>

Configure vlans vlan-id

Default VLAN identifier

Attribute Name: vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<vlans>

<vlan-id>2</vlan-id>

</config>

</vlans>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-edge access) vlan <2-4094>

Configure vlans vlan-id

Default VLAN identifier

Attribute Name: vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<vlans>

<vlan-id>1</vlan-id>

</config>

</vlans>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-edge hybrid) vlan <1-4094>

Configure native vlan id

Native VLAN ID

Attribute Name: native-vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<vlans>

<native-vlan-id>2</native-vlan-id>

</config>

</vlans>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (trunk) native vlan <2-4094>

Configure translated svlan id

Specifies translated service VLAN identifier

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: translated-svlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<svlan-translations>

<svlan-translation>

<original-svlan-id>VLAN_ID</original-svlan-id>

<original-svlan-id>VLAN_ID</original-svlan-id>

</config>

<translated-svlan-id>VLAN_ID</translated-svlan-id>

</svlan-translation>

</svlan-translations>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-network) vlan translation svlan VLAN_ID svlan VLAN_ID

Configure original svlan id

Specifies translated service VLAN identifier

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: translated-svlan-id

Attribute Type: uint16

Attribute Name: translated-cvlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<svlan-translations>

<svlan-translation>

<original-svlan-id>VLAN_ID</original-svlan-id>

<original-svlan-id>VLAN_ID</original-svlan-id>

<translated-cvlan-id>1</translated-cvlan-id>

</config>

<translated-svlan-id>VLAN_ID</translated-svlan-id>

</svlan-translation>

</svlan-translations>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-network) vlan translation svlan VLAN_ID cvlan <1-4094> svlan VLAN_ID

Configure cvlan id

Specifies translated service VLAN identifier

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: translated-svlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<cvlan-svlan-translations>

<cvlan-svlan-translation>

<svlan-id>1</svlan-id>

<svlan-id>1</svlan-id>

<cvlan-id>1</cvlan-id>

</config>

<cvlan-id>1</cvlan-id>

<translated-svlan-id>1</translated-svlan-id>

</cvlan-svlan-translation>

</cvlan-svlan-translations>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-network) vlan translation cvlan <1-4094> svlan <1-4094> svlan <1-4094>

Configure svlan id

Specifies translated service VLAN identifier

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: translated-svlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Attribute Name: translated-cvlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<switched-vlans>

<switched-vlan>

<interface-mode>access</interface-mode>

<interface-mode>access</interface-mode>

</config>

<cvlan-svlan-translations>

<cvlan-svlan-translation>

<svlan-id>1</svlan-id>

<svlan-id>1</svlan-id>

<cvlan-id>1</cvlan-id>

<translated-cvlan-id>1</translated-cvlan-id>

</config>

<cvlan-id>1</cvlan-id>

<translated-svlan-id>1</translated-svlan-id>

</cvlan-svlan-translation>

</cvlan-svlan-translations>

</switched-vlan>

</switched-vlans>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport (customer-network) vlan translation cvlan <1-4094> svlan <1-4094> cvlan <1-4094> svlan <1-4094>

Configure logging

port security logging

Attribute Name: logging

Attribute Type: uint8

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

</logging>

</config>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security logging enable

Configure mode

port security mode type

Attribute Name: mode

Attribute Type: enum (static|default)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

</config>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security

Configure port-security mode

port security mode type

Attribute Name: mode

Attribute Type: enum (static|default)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<mode>static</mode>

</config>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security (static)

Configure maximum limit

Maximum limit for port security

Attribute Name: maximum-limit

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-1000

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<maximum-limit>1</maximum-limit>

</config>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security maximum <1-1000>

Configure mac address

Use this attribute to configure the static forwarding entry for port-security

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<secure-mac>

<default-vlan-mappings>

<default-vlan-mapping>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</config>

</default-vlan-mapping>

</default-vlan-mappings>

</secure-mac>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security mac-address XXXX.XXXX.XXXX

Configure vlan-mapping cvlan-id

Use this attribute to configure the port-security with static forwarding entry and CVLAN ID

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: cvlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<secure-mac>

<vlan-mappings>

<vlan-mapping>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</config>

<cvlan-id>2</cvlan-id>

</vlan-mapping>

</vlan-mappings>

</secure-mac>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security mac-address XXXX.XXXX.XXXX vlanId <2-4094>

Configure vlan-mapping svlan-id

Use this attribute to configure the port-security with static forwarding entry and SVLAN ID

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: svlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<secure-mac>

<vlan-mappings>

<vlan-mapping>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</config>

<svlan-id>2</svlan-id>

</vlan-mapping>

</vlan-mappings>

</secure-mac>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security mac-address XXXX.XXXX.XXXX svlanId <2-4094>

Configure cvlan-svlan-mappings svlan-id

Use this attribute to configure the port-security with static forwarding entry and SVLAN ID

This command is supported when following feature are enabled Provider bridging feature

Attribute Name: svlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<port-security>

<secure-mac>

<cvlan-svlan-mappings>

<cvlan-svlan-mapping>

<svlan-id>2</svlan-id>

<svlan-id>2</svlan-id>

<cvlan-id>2</cvlan-id>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</config>

<cvlan-id>2</cvlan-id>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</cvlan-svlan-mapping>

</cvlan-svlan-mappings>

</secure-mac>

</port-security>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport port-security mac-address XXXX.XXXX.XXXX vlanId <2-4094> svlanId <2-4094>

Configure private-vlan mode

Use this attribute to make a layer2 port as a host port or promiscuous port or pvlan-trunk port

This command is supported when following feature are enabled Private VLAN feature

Attribute Name: mode

Attribute Type: enum (host|promiscuous)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<private-vlan>

</config>

</private-vlan>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport mode private-vlan (host|promiscuous)

Configure associate vlan id

Private VLAN Association

This command is supported when following feature are enabled Private VLAN feature

Attribute Name: associate-vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<private-vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

<associate-vlan-id>2</associate-vlan-id>

</association>

</associations>

</private-vlan>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport private-vlan host-association <2-4094> add <2-4094>

Configure mapping vlan id

Primary vlan identifier

This command is supported when following feature are enabled Private VLAN feature

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Name: mapping-vlan-id

Attribute Type: string

Attribute Range: 2-4094

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<private-vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

<mapping-vlan-id>VLAN_ID</mapping-vlan-id>

</config>

</association>

</associations>

</private-vlan>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport private-vlan mapping <2-4094> add VLAN_ID

Configure association trunk vlan id

private-vlan Mapping

This command is supported when following feature are enabled Private VLAN feature

Attribute Name: association-trunk-vlan-id

Attribute Type: uint16

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<port-vlan xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<private-vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

<association-trunk-vlan-id>2</association-trunk-vlan-id>

</association>

</associations>

</private-vlan>

</port-vlan>

</interface>

</interfaces>

Command Syntax

switchport private-vlan association-trunk <2-4094> <2-4094>

Configure instance name

Specifies VLAN identifier for static MAC entry in case of provider-network VLAN will be considered as service VLAN

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Attribute Name: action

Attribute Type: enum (discard|forward)

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<vlan-static-fdb xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-port-vlan">

<entry>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

<mac-address>XXXX.XXXX.XXXX</mac-address>

<action>discard</action>

<interface-name>IFNAME</interface-name>

</config>

<mac-address>XXXX.XXXX.XXXX</mac-address>

</entry>

</entries>

</vlan-static-fdb>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> address XXXX.XXXX.XXXX (discard|forward) IFNAME vlan <2-4094>

IPI-VLAN-XC

Configure xconnect name

This attribute uniquely identifies a cross connect on the device

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: xconnect-name

Attribute Type: string

Attribute Range: 1-30

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

</cross-connect>

</cross-connects>

Command Syntax

cross-connect WORD

Configure disable

Disable this cross connect

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: disable

Attribute Type: empty

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

</disable>

</cross-connect>

</cross-connects>

Command Syntax

disable

Configure port endpoint 1

Configure port endpoint-1

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: port-endpoint-1

Attribute Type: string

Attribute Name: port-endpoint-2

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-port>

<port-endpoint-2>IFNAME</port-endpoint-2>

<port-endpoint-1>IFNAME</port-endpoint-1>

</config>

</cross-connect-port>

</cross-connect>

</cross-connects>

Command Syntax

ep1 IFNAME ep2 IFNAME

Configure backup endpoint 1

Configure backup endpoint-1

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: backup-endpoint-1

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-port-specific>

<backup-endpoint-1>IFNAME</backup-endpoint-1>

</config>

</cross-connect-port-specific>

</cross-connect>

</cross-connects>

Command Syntax

backup ep1 IFNAME

Configure backup endpoint 2

Configure backup endpoint-2

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: backup-endpoint-2

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-port-specific>

<backup-endpoint-2>IFNAME</backup-endpoint-2>

</config>

</cross-connect-port-specific>

</cross-connect>

</cross-connects>

Command Syntax

backup ep2 IFNAME

Configure revertive

Enable revertive operation for this XC

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: revertive

Attribute Type: empty

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-port-specific>

</revertive>

</config>

</cross-connect-port-specific>

</cross-connect>

</cross-connects>

Command Syntax

cross-connect switchover type revertive

Configure link fault pass through enable

Configure link fault pass through

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: link-fault-pass-through-enable

Attribute Type: empty

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-port-specific>

</link-fault-pass-through-enable>

</config>

</cross-connect-port-specific>

</cross-connect>

</cross-connects>

Command Syntax

link-fault-pass-through enable

Configure vlan endpoint 1

Configure vlan endpoint-1

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: vlan-endpoint-1

Attribute Type: string

Attribute Name: vlan-endpoint-2

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-vlan>

<vlan-endpoint-2>IFNAME</vlan-endpoint-2>

<vlan-endpoint-1>IFNAME</vlan-endpoint-1>

</config>

</cross-connect-vlan>

</cross-connect>

</cross-connects>

Command Syntax

vlan ep1 IFNAME ep2 IFNAME

Configure outer vlan range

Use this attribute to set the outer vlan id for XC.

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: outer-vlan-range

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-vlan>

<vlan-xc-entries>

<vlan-xc-entry>

<inner-vlan-range>WORD</inner-vlan-range>

<inner-vlan-range>WORD</inner-vlan-range>

<outer-vlan-range>WORD</outer-vlan-range>

</config>

<outer-vlan-range>WORD</outer-vlan-range>

</vlan-xc-entry>

</vlan-xc-entries>

</cross-connect-vlan>

</cross-connect>

</cross-connects>

Command Syntax

outer-vlan WORD

Configure inner vlan range

Use this attribute to set the inner vlan id for XC.

This command is supported when following feature are enabled VLAN XC support enabled

Attribute Name: inner-vlan-range

Attribute Type: string

Netconf edit-config payload

<cross-connects xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<cross-connect>

<xconnect-name>WORD</xconnect-name>

<xconnect-name>WORD</xconnect-name>

</config>

<cross-connect-vlan>

<vlan-xc-entries>

<vlan-xc-entry>

<inner-vlan-range>WORD</inner-vlan-range>

<inner-vlan-range>WORD</inner-vlan-range>

<outer-vlan-range>WORD</outer-vlan-range>

</config>

<outer-vlan-range>WORD</outer-vlan-range>

</vlan-xc-entry>

</vlan-xc-entries>

</cross-connect-vlan>

</cross-connect>

</cross-connects>

Command Syntax

outer-vlan WORD inner-vlan WORD

clear cross-connect counters (NAME|)

Attribute Name: xc-name

Attribute Type: string

Netconf RPC payload

<clear-cross-connect-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vlan-xc">

<xc-name>NAME</xc-name>

</clear-cross-connect-counters>

Command Syntax

clear cross-connect counters (NAME|)

IPI-XSTP

Configure ageing time

Use this attribute to specify the aging-out time for a learned MAC address. The learned MAC address persists until this specified time. Setting value to 0 would disable ageing of the bridge.

Attribute Name: ageing-time

Attribute Type: union

Default Value: 300

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<ageing-time>300</ageing-time>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> ageing disable

Configure instance name

Use this attribute to specify the aging-out time for a learned MAC address. The learned MAC address persists until this specified time. Setting value to 0 would disable ageing of the bridge.

Attribute Name: ageing-time

Attribute Type: union

Default Value: 300

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<ageing-time>300</ageing-time>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> ageing-time (0|<10-1000000>)

Configure enable cisco interoperability

Use this attribute to enable/disable Cisco interoperability for MSTP (Multiple Spanning Tree Protocol). If Cisco interoperability is required, all devices in the switched LAN must be Cisco-interoperability enabled. When router interoperates with Cisco, the only criteria used to classify a region are the region name and revision level. VLAN-to-instance mapping is not used to classify regions when interoperating with Cisco.

Attribute Name: enable-cisco-interoperability

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</enable-cisco-interoperability>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> cisco-interoperability enable

Configure forwarding delay

Use this attribute to set the time (in seconds) after which (if this bridge is the root bridge) each port changes states to learning and forwarding. This value is used by all instances

Attribute Name: forwarding-delay

Attribute Type: uint8

Default Value: 15

Attribute Range: 4-30

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<forwarding-delay>4</forwarding-delay>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> forward-time <4-30>

Configure hello time

Use this attribute to set the hello-time, the time in seconds after which (if this bridge is the root bridge) all the bridges in a bridged LAN exchange Bridge Protocol Data Units (BPDUs). A very low value of this parameter leads to excessive traffic on the network, while a higher value delays the detection of topology change.This value is used by all instances.Configure the bridge instance name beforeusing this attribute. The allowable range of values is 1-10 seconds. However, make sure that the value of hello time is always greater than the value of hold time (2 seconds by default)

Attribute Name: hello-time

Attribute Type: uint8

Default Value: 2

Attribute Range: 1-10

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<hello-time>1</hello-time>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> hello-time <1-10>

Configure max age

Use this attribute to set the maximum age for a bridge. This value is used by all instances. Maximum age is the maximum time in seconds for which (if a bridge is the root bridge) a message is considered valid. This prevents the frames from looping indefinitely. The value of maximum age should be greater than twice the value of hello time plus 1, but less than twice the value of forward delay minus 1. The allowable range for max-age is 6-40 seconds. Configure this value sufficiently high, so that a frame generated by root can be propagated to the leaf nodes without exceeding the maximum age.

Attribute Name: max-age

Attribute Type: uint8

Default Value: 20

Attribute Range: 6-40

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<max-age>6</max-age>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> max-age <6-40>

Configure max hops

Use this attribute to specify the maximum allowed hops for a BPDU in an MST region. This parameter is used by all the instances of the MST. Specifying the maximum hops for a BPDU prevents the messages from looping indefinitely in the network. When a bridge receives an MST BPDU that has exceeded the allowed maximum hops, it discards the BPDU.

Attribute Name: max-hops

Attribute Type: uint8

Default Value: 20

Attribute Range: 1-40

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<max-hops>1</max-hops>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> max-hops <1-40>

Configure bridge priority

Use this attribute to set the bridge priority for the common instance. Using a lower priority indicates a greater likelihood of the bridge becoming root. The priority values can be set only in increments of 4096.

Attribute Name: bridge-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 0-61440

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-priority>0</bridge-priority>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> priority <0-61440>

Configure transmit hold count

Use this attribute to set the maximum number of transmissions of BPDUs by the transmit state machine

Attribute Name: transmit-hold-count

Attribute Type: uint8

Default Value: 6

Attribute Range: 1-10

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<transmit-hold-count>1</transmit-hold-count>

</config>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> transmit-holdcount <1-10>

Configure enable bpdu filter

All ports that have their BPDU filter set to default take the same value of BPDU filter as that of the bridge. The Spanning Tree Protocol sends BPDUs from all ports. Enabling the BPDU Filter feature ensures that PortFast-enabled ports do not transmit or receive any BPDUs.

Attribute Name: enable-bpdu-filter

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</enable-bpdu-filter>

</config>

</global>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> spanning-tree portfast bpdu-filter

Configure enable bpdu guard

Use this attribute to set the portfast BPDU (Bridge Protocol Data Unit) guard or filter for the bridge

Attribute Name: enable-bpdu-guard

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</enable-bpdu-guard>

</config>

</global>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> spanning-tree portfast bpdu-guard

Configure enable error disable timeout

Use this attribute to enable the error-disable-timeout facility, which sets a timeout for ports that are disabled due to the BPDU guard feature. The BPDU guard feature shuts down the port on receiving a BPDU on a BPDU-guard enabled port. This attribute associates a timer with the feature such that the port gets enabled back without manual intervention after a set interval.

Attribute Name: enable-error-disable-timeout

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

</enable-error-disable-timeout>

</config>

</global>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> spanning-tree errdisable-timeout enable

Configure force version

Use this attribute to set the version for the bridge. A version identifier of less than a value of 2 enforces the spanning tree protocol. Although the attribute supports an input range of 0-4, for RSTP, the valid range is 0-2. When the force-version is set for a bridge, all ports of the bridge have the same spanning tree version set.

Attribute Name: force-version

Attribute Type: uint8

Default Value: 0

Attribute Range: 0-4

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<force-version>0</force-version>

</config>

</global>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> spanning-tree force-version <0-4>

Configure path cost method

Use this attribute to set a spanning-tree path cost method. If the short parameter is used, the switch uses a value for the default path cost a number in the range 1 through 65,535. If the long parameter is used, the switch uses a value for the default path cost a number in the range 1 through 200,000,000.

Attribute Name: path-cost-method

Attribute Type: enum (short|long|default)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<path-cost-method>default</path-cost-method>

</config>

</global>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> spanning-tree pathcost method (short|long)

Configure bridge type

Attribute Name: instance-name

Attribute Type: string

Attribute Name: bridge-type

Attribute Type: enum (spanning-tree|rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree)

Attribute Name: disable-spanning-tree

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-admins>

<bridge-admin>

<bridge-type>spanning-tree</bridge-type>

</disable-spanning-tree>

</bridge-admin>

</bridge-admins>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> (rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree) enable

Configure disable spanning tree

Attribute Name: instance-name

Attribute Type: string

Attribute Name: bridge-type

Attribute Type: enum (spanning-tree|rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree)

Attribute Name: disable-spanning-tree

Attribute Type: uint8

Attribute Name: bridge-forwarding

Attribute Type: enum (bridge-blocked|bridge-forward)

Default Value: bridge-blocked

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-admins>

<bridge-admin>

<bridge-type>spanning-tree</bridge-type>

</disable-spanning-tree>

<bridge-forwarding>bridge-blocked</bridge-forwarding>

</config>

</bridge-admin>

</bridge-admins>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> (rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree) enable (bridge-blocked|bridge-forward)

Configure network-instances instance-name

Attribute Name: instance-name

Attribute Type: string

Attribute Name: bridge-type

Attribute Type: enum (spanning-tree|rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree)

Attribute Name: disable-spanning-tree

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-admins>

<bridge-admin>

<bridge-type>spanning-tree</bridge-type>

</disable-spanning-tree>

</bridge-admin>

</bridge-admins>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> spanning-tree enable

Configure bridge forwarding

Attribute Name: instance-name

Attribute Type: string

Attribute Name: bridge-type

Attribute Type: enum (spanning-tree|rapid-spanning-tree|multiple-spanning-tree|rapid-pervlan-spanning-tree)

Attribute Name: disable-spanning-tree

Attribute Type: uint8

Attribute Name: bridge-forwarding

Attribute Type: enum (bridge-blocked|bridge-forward)

Default Value: bridge-blocked

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-admins>

<bridge-admin>

<bridge-type>spanning-tree</bridge-type>

</disable-spanning-tree>

<bridge-forwarding>bridge-blocked</bridge-forwarding>

</config>

</bridge-admin>

</bridge-admins>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> spanning-tree enable (bridge-blocked|bridge-forward)

Configure enable shutdown

Attribute Name: instance-name

Attribute Type: string

Attribute Name: enable-shutdown

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-shutdowns>

<bridge-shutdown>

</enable-shutdown>

</bridge-shutdown>

</bridge-shutdowns>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

bridge shutdown <1-32>

Configure network-instances instance-name

Attribute Name: instance-name

Attribute Type: string

Attribute Name: enable-shutdown

Attribute Type: uint8

Attribute Name: bridge-forwarding

Attribute Type: enum (bridge-blocked|bridge-forward)

Default Value: bridge-blocked

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<bridge-shutdowns>

<bridge-shutdown>

</enable-shutdown>

<bridge-forwarding>bridge-blocked</bridge-forwarding>

</config>

</bridge-shutdown>

</bridge-shutdowns>

</global>

</stp>

</network-instance>

</network-instances>

Command Syntax

bridge shutdown <1-32> (bridge-blocked|bridge-forward)

Configure region name

Use this attribute to create an MST region and specify its name. MST bridges of a region form different spanning trees for different VLANs.

Attribute Name: region-name

Attribute Type: string

Default Value: Default

Attribute Range: 1-32

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<region-name>REGION_NAME</region-name>

</config>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> region REGION_NAME

Configure revision number

Use this attribute to specify the number for configuration information.

Attribute Name: revision-number

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<revision-number>0</revision-number>

</config>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> revision <0-65535>

Configure vlan id

Use this attribute to simultaneously add multiple VLANs for the corresponding instance of a bridge.The VLANs must be created before being associated with an MST instance (MSTI). If the VLAN range is not specified,the MSTI will not be created.

Attribute Name: vlan-id

Attribute Type: uint16

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<te-mst-instance>

<vlan-id>VLANID</vlan-id>

</config>

</te-mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> te-msti vlan VLANID

Configure disable spanning tree

Use this attribute to diasble spanning tree for TE MSTI instance

Attribute Name: disable-spanning-tree

Attribute Type: uint8

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<te-mst-instance>

</disable-spanning-tree>

</config>

</te-mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

no bridge <1-32> te-msti

Configure name

The textual name of the interface

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<te-mst-instance>

</config>

</interface>

</interfaces>

</te-mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance te-msti

Configure instance id

Attribute Name: instance-name

Attribute Type: string

Attribute Name: instance-id

Attribute Type: union

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-63>

Configure network-instances instance-name

Attribute Name: instance-name

Attribute Type: string

Attribute Name: instance-id

Attribute Type: uint16

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-type>l2ni</instance-type>

<instance-type>l2ni</instance-type>

<instance-name>WORD</instance-name>

</config>

<instance-name>WORD</instance-name>

<stp>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-62>

Configure instance type

Attribute Name: vlan-id

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

<vlan-id>VLAN_RANGE</vlan-id>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-63> vlan VLAN_RANGE

Configure instance id

Attribute Name: vlan-id

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

<vlan-id>VLAN_RANGE</vlan-id>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-62> vlan VLAN_RANGE

Configure mst-instance bridge-priority

Use this attribute to set the bridge instance priority.

Attribute Name: bridge-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 0-61440

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

<bridge-priority>0</bridge-priority>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-63> priority <0-61440>

Configure mst-instance bridge-priority

Use this attribute to set the bridge instance priority.

Attribute Name: bridge-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 0-61440

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

<bridge-priority>0</bridge-priority>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> instance <1-62> priority <0-61440>

Configure interfaces name

The textual name of the interface

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-63>

Configure interfaces name

The textual name of the interface

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-62>

Configure interfaces name

The textual name of the interface

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>4092</instance-id>

<instance-id>4092</instance-id>

</config>

</config>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance spbm

Configure interfaces name

The textual name of the interface

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>4093</instance-id>

<instance-id>4093</instance-id>

</config>

</config>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance spbv

Configure path cost

Use this attribute to set a path cost for a multiple spanning tree instance. Before using this attribute, you must explicitly add an MST instance to a port using the bridge-group instance attribute.

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 20000000

Attribute Range: 1-200000000

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

<path-cost>1</path-cost>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-63> path-cost <1-200000000>

Configure interface path-cost

Use this attribute to set a path cost for a multiple spanning tree instance. Before using this attribute, you must explicitly add an MST instance to a port using the bridge-group instance attribute.

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 20000000

Attribute Range: 1-200000000

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

<path-cost>1</path-cost>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-62> path-cost <1-200000000>

Configure port priority

Use this attribute to set the bridge instance priority.The Multiple Spanning Tree Protocol uses port priority as a tiebreaker to determine which port should forward frames for a particular instance on a LAN, or which port should be the root port for an instance. A lower value implies a better priority. In the case of the same priority, the interface index will serve as the tiebreaker, with the lower-numbered interface being preferred over others.

Attribute Name: port-priority

Attribute Type: int16

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

<port-priority>0</port-priority>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-63> priority <0-240>

Configure interface port-priority

Attribute Name: port-priority

Attribute Type: int16

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>l2ni</instance-type>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</config>

<port-priority>0</port-priority>

</interface>

</interfaces>

</mst-instance>

</mst-instances>

</mstp>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> instance <1-62> priority <0-240>

Configure vlans vlan-id

Vlan ID

This command is supported when following feature are enabled rpvst feature

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<rapid-pvst>

<vlans>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

</vlan>

</vlans>

</rapid-pvst>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> vlan <2-4094>

Configure vlan bridge-priority

Use this attribute to set the bridge instance priority.

This command is supported when following feature are enabled rpvst feature

Attribute Name: bridge-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 0-61440

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<rapid-pvst>

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

<bridge-priority>0</bridge-priority>

</vlan>

</vlans>

</rapid-pvst>

</stp>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge <1-32> vlan <2-4094> priority <0-61440>

Configure port-bridge path-cost

Use this attribute to set the cost of a path. Before you can use this attribute to set a path-cost in a VLAN configuration, you must explicitly add an MST instance to a port using the bridge-group instance attribute..

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 20000000

Attribute Range: 1-200000000

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<mstp-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<port-bridge>

<path-cost>1</path-cost>

</config>

</port-bridge>

</mstp-port>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> path-cost <1-200000000>

Configure port-bridge port-priority

Use this attribute to set the port priority for a bridge group. The Multiple Spanning Tree Protocol uses port priority as a tiebreaker to determine which port should forward frames for a particular instance on a LAN, or which port should be the root port for an instance. A lower value implies a better priority. In the case of the same priority, the interface index will serve as the tiebreaker, with the lower-numbered interface being preferred over others.

Attribute Name: port-priority

Attribute Type: int16

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<mstp-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<port-bridge>

<port-priority>0</port-priority>

</config>

</port-bridge>

</mstp-port>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> priority <0-240>

Configure vlan path-cost

Use this attribute to set the bridge path cost.

This command is supported when following feature are enabled rpvst feature

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-200000000

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<vlan-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

<path-cost>1</path-cost>

</vlan>

</vlans>

</vlan-port>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> vlan <2-4094> path-cost <1-200000000>

Configure vlan port-priority

Use this attribute to set the port instance priority.

This command is supported when following feature are enabled rpvst feature

Attribute Name: port-priority

Attribute Type: uint8

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<vlan-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

<port-priority>0</port-priority>

</vlan>

</vlans>

</vlan-port>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> vlan <2-4094> priority <0-240>

Configure vlan vlan-id

Vlan ID

This command is supported when following feature are enabled rpvst feature

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>1</instance-name>

<instance-name>WORD</instance-name>

<instance-type>l2ni</instance-type>

</config>

<instance-type>l2ni</instance-type>

<bridge-ports>

</config>

<vlan-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

</vlan>

</vlans>

</vlan-port>

</interface>

</bridge-ports>

</bridge>

</network-instance>

</network-instances>

Command Syntax

bridge-group <1-32> vlan <2-4094>

Configure interface hello-time

Use this attribute to set the hello-time, the time in seconds after which (if this bridge is the root bridge) all the default bridges in a bridged LAN exchange Bridge Protocol Data Units (BPDUs). A very low value of this parameter leads to excessive traffic on the network, while a higher value delays the detection of topology change. This value is used by all instances.

Attribute Name: hello-time

Attribute Type: uint8

Default Value: 2

Attribute Range: 1-10

Netconf edit-config payload

</config>

<hello-time>1</hello-time>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree hello-time <1-10>

Configure port configuration

Use this attribute to set a port as an edge-port and to enable rapid transitions.

Attribute Name: port-configuration

Attribute Type: enum (edgeport|portfast)

Default Value: portfast

Netconf edit-config payload

</config>

<port-configuration>portfast</port-configuration>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree (edgeport|portfast)

Configure enable automatic edge detection

Use this attribute to enable automatic edge detection.

Attribute Name: enable-automatic-edge-detection

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-automatic-edge-detection>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree autoedge

Configure bpdu guard

Use this attribute to set the portfast BPDU (Bridge Protocol Data Unit) guard or filter for the bridge.When the BPDU guard feature is set for a bridge, all portfast-enabled ports of the bridge that have the BPDU guard set to default shut down the port on receiving a BPDU. In this case, the BPDU is not processed. You can configure the errdisable-timeout feature to enable the port after the specified time interval.

Attribute Name: bpdu-guard

Attribute Type: enum (enable|disable|default)

Default Value: default

Netconf edit-config payload

</config>

<bpdu-guard>default</bpdu-guard>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree bpdu-guard (enable|disable|default)

Configure bpdu filter

Use this attribute to set the portfast BPDU (Bridge Protocol Data Unit) guard or filter for the bridge.All ports that have their BPDU filter set to default take the same value of BPDU filter as that of the bridge. The Spanning Tree Protocol sends BPDUs from all ports. Enabling the BPDU Filter feature ensures that PortFast-enabled ports do not transmit or receive any BPDUs

Attribute Name: bpdu-filter

Attribute Type: enum (enable|disable|default)

Default Value: default

Netconf edit-config payload

</config>

<bpdu-filter>default</bpdu-filter>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree bpdu-filter (enable|disable|default)

Configure enable root guard

Use this attribute to enable the root guard feature for the port. This feature disables reception of superior BPDUs.The root guard feature makes sure that the port on which it is enabled is a designated port. If the root guard enabled port receives a superior BPDU, it goes to a Listening state (for STP) or discarding state (for RSTP and MSTP).

Attribute Name: enable-root-guard

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-root-guard>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree guard root

Configure link type

Use this attribute to enable or disable point-to-point or shared link types. RSTP has a backward-compatible STP , spanning-tree link-type shared. An alternative is the spanning-tree force-version 0

Attribute Name: link-type

Attribute Type: enum (shared|point-to-point|auto)

Default Value: point-to-point

Netconf edit-config payload

</config>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree link-type (shared|point-to-point|auto)

Configure enable restricted domain role

Use this attribute to set the restricted-domain-role value of the port to TRUE.

Attribute Name: enable-restricted-domain-role

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-restricted-domain-role>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree restricted-domain-role

Configure enable restricted role

Use this attribute to set the restricted-role value of the port to TRUE

Attribute Name: enable-restricted-role

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-restricted-role>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree restricted-role

Configure enable restricted tcn

Use this attribute to set the restricted TCN value of the port to TRUE

Attribute Name: enable-restricted-tcn

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-restricted-tcn>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree restricted-tcn

Configure enable instance restricted tcn

Use this attribute to set the restricted TCN value for the instance to TRUE

Attribute Name: enable-instance-restricted-tcn

Attribute Type: uint8

Netconf edit-config payload

</config>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</enable-instance-restricted-tcn>

</mst-instance>

</mst-instances>

</mstp>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree instance <1-63> restricted-tcn

Configure mst-instance enable-instance-restricted-tcn

Use this attribute to set the restricted TCN value for the instance to TRUE

Attribute Name: enable-instance-restricted-tcn

Attribute Type: uint8

Netconf edit-config payload

</config>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</enable-instance-restricted-tcn>

</mst-instance>

</mst-instances>

</mstp>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree instance <1-62> restricted-tcn

Configure enable instance restricted role

Use this attribute to set the restricted role value for the instance to TRUE

Attribute Name: enable-instance-restricted-role

Attribute Type: uint8

Netconf edit-config payload

</config>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</enable-instance-restricted-role>

</mst-instance>

</mst-instances>

</mstp>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree instance <1-63> restricted-role

Configure mst-instance enable-instance-restricted-role

Use this attribute to set the restricted role value for the instance to TRUE

Attribute Name: enable-instance-restricted-role

Attribute Type: uint8

Netconf edit-config payload

</config>

<mstp>

<mst-instances>

<mst-instance>

<instance-id>MSTP_INSTANCE_T</instance-id>

<instance-id>MSTP_INSTANCE_T</instance-id>

</config>

</enable-instance-restricted-role>

</mst-instance>

</mst-instances>

</mstp>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree instance <1-62> restricted-role

Configure vlan enable-restricted-role

Use this attribute to set the restricted role value for the instance to TRUE

This command is supported when following feature are enabled rpvst feature

Attribute Name: enable-restricted-role

Attribute Type: empty

Netconf edit-config payload

</config>

<rapid-pvst>

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

</enable-restricted-role>

</vlan>

</vlans>

</rapid-pvst>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree vlan <2-4094> restricted-role

Configure vlan enable-restricted-tcn

Use this attribute to set the restricted TCN value for the instance to TRUE

This command is supported when following feature are enabled rpvst feature

Attribute Name: enable-restricted-tcn

Attribute Type: empty

Netconf edit-config payload

</config>

<rapid-pvst>

<vlans>

<vlan>

<vlan-id>2</vlan-id>

<vlan-id>2</vlan-id>

</config>

</enable-restricted-tcn>

</vlan>

</vlans>

</rapid-pvst>

</interface>

</interfaces>

</xstp>

Command Syntax

spanning-tree vlan <2-4094> restricted-tcn

Configure customer-spanning-tree bridge-priority

This command is supported when following feature are enabled provider bridge feature

Attribute Name: bridge-priority

Attribute Type: uint16

Default Value: 61440

Attribute Range: 0-61440

Netconf edit-config payload

</config>

<customer-spanning-tree>

<bridge-priority>0</bridge-priority>

</config>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree priority <0-61440>

Configure customer-spanning-tree max-age

This command is supported when following feature are enabled provider bridge feature

Attribute Name: max-age

Attribute Type: uint8

Default Value: 20

Attribute Range: 6-40

Netconf edit-config payload

</config>

<customer-spanning-tree>

<max-age>6</max-age>

</config>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree max-age <6-40>

Configure customer-spanning-tree hello-time

Use this attribute to set the hello-time, the time in seconds after which (if this bridge is the root bridge) all the bridges.in a bridged LAN exchange Bridge Protocol Data Units (BPDUs). A very low value of this parameter leads to excessive traffic on the network, while a higher value delays the detection of topology change.This value is used by all instances. Configure the bridge instance name before using this attribute. The allowable range of values is 1-10 seconds. However, make sure that the value of hello time is always greater than the value of hold time (2 seconds by default)

This command is supported when following feature are enabled provider bridge feature

Attribute Name: hello-time

Attribute Type: uint8

Default Value: 2

Attribute Range: 1-10

Netconf edit-config payload

</config>

<customer-spanning-tree>

<hello-time>1</hello-time>

</config>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree hello-time <1-10>

Configure forward delay

Use this attribute to set the time (in seconds) after which (if this bridge is the root bridge) each port changes states to learning and forwarding. This value is used by all instances

This command is supported when following feature are enabled provider bridge feature

Attribute Name: forward-delay

Attribute Type: uint8

Default Value: 15

Attribute Range: 4-30

Netconf edit-config payload

</config>

<customer-spanning-tree>

<forward-delay>4</forward-delay>

</config>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree forward-time <4-30>

Configure customer-spanning-tree transmit-hold-count

Use this attribute to set the maximum number of transmissions of BPDUs by the transmit state machine

This command is supported when following feature are enabled provider bridge feature

Attribute Name: transmit-hold-count

Attribute Type: uint8

Default Value: 6

Attribute Range: 1-10

Netconf edit-config payload

</config>

<customer-spanning-tree>

<transmit-hold-count>1</transmit-hold-count>

</config>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree transmit-holdcount <1-10>

Configure customer-edge path-cost

Use this attribute to set the bridge path cost.

This command is supported when following feature are enabled provider bridge feature

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-200000000

Netconf edit-config payload

</config>

<customer-spanning-tree>

<customer-edge>

<path-cost>1</path-cost>

</config>

</customer-edge>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree customer-edge path-cost <1-200000000>

Configure customer-edge port-priority

Use this attribute to set the port instance priority.

This command is supported when following feature are enabled provider bridge feature

Attribute Name: port-priority

Attribute Type: uint8

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

</config>

<customer-spanning-tree>

<customer-edge>

<port-priority>0</port-priority>

</config>

</customer-edge>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree customer-edge priority <0-240>

Configure svlan id

Use this attribute to set the bridge path cost.

This command is supported when following feature are enabled provider bridge feature

Attribute Name: path-cost

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-200000000

Netconf edit-config payload

</config>

<customer-spanning-tree>

<provider-edge>

<vlans>

<vlan>

<svlan-id>0</svlan-id>

<svlan-id>2</svlan-id>

</config>

<path-cost>1</path-cost>

</vlan>

</vlans>

</provider-edge>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree provider-edge svlan <2-4094> path-cost <1-200000000>

Configure vlan port-priority

Use this attribute to set the port instance priority.

This command is supported when following feature are enabled provider bridge feature

Attribute Name: port-priority

Attribute Type: uint8

Default Value: 128

Attribute Range: 0-240

Netconf edit-config payload

</config>

<customer-spanning-tree>

<provider-edge>

<vlans>

<vlan>

<svlan-id>0</svlan-id>

<svlan-id>2</svlan-id>

</config>

<port-priority>0</port-priority>

</vlan>

</vlans>

</provider-edge>

</customer-spanning-tree>

</interface>

</interfaces>

</xstp>

Command Syntax

customer-spanning-tree provider-edge svlan <2-4094> priority <0-240>

Configure options

Debug configuration flag

Attribute Name: options

Netconf edit-config payload

<mstp>

<debug>

<options>mstp protocol</options>

</config>

</debug>

</mstp>

</xstp>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<mstp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<terminal-debug-options>mstp protocol</terminal-debug-options>

</mstp-terminal-debug-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<mstp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<terminal-debug-options>mstp protocol</terminal-debug-options>

</mstp-terminal-debug-off>

Command Syntax

clear spanning-tree detected protocols bridge <1-32>

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-detected-protocols-per-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<bridge-id>1</bridge-id>

</clear-spanning-tree-detected-protocols-per-bridge>

Command Syntax

clear spanning-tree detected protocols bridge <1-32>

clear spanning-tree detected protocols interface INTERFACE

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-detected-protocols-per-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<interface-name>INTERFACE</interface-name>

</clear-spanning-tree-detected-protocols-per-interface>

Command Syntax

clear spanning-tree detected protocols interface INTERFACE

clear spanning-tree statistics (spbm|<1-63>) bridge <1-32>

Attribute Name: mst-instance-id

Attribute Type: union

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-instance-and-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<mst-instance-id>MSTP_INSTANCE_SPBM_TYPE_T</mst-instance-id>

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-instance-and-bridge>

Command Syntax

clear spanning-tree statistics (spbm|<1-63>) bridge <1-32>

clear spanning-tree statistics interface IFNAME vlan <2-4094> bridge <1-32>

Attribute Name: interface-name

Attribute Type: string

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-interface-vlan-and-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<interface-name>IFNAME</interface-name>

<vlan-id>2</vlan-id>

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-interface-vlan-and-bridge>

Command Syntax

clear spanning-tree statistics interface IFNAME vlan <2-4094> bridge <1-32>

clear spanning-tree statistics interface IFNAME bridge <1-32>

Attribute Name: interface-name

Attribute Type: string

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-interface-and-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<interface-name>IFNAME</interface-name>

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-interface-and-bridge>

Command Syntax

clear spanning-tree statistics interface IFNAME bridge <1-32>

clear spanning-tree statistics bridge <1-32>

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-bridge>

Command Syntax

clear spanning-tree statistics bridge <1-32>

clear spanning-tree statistics vlan <2-4094> bridge <1-32>

Attribute Name: vlan-id

Attribute Type: uint16

Attribute Range: 2-4094

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-vlan-and-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<vlan-id>2</vlan-id>

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-vlan-and-bridge>

Command Syntax

clear spanning-tree statistics vlan <2-4094> bridge <1-32>

clear spanning-tree statistics interface IFNAME (spbm|<1-63>) bridge <1-32>

Attribute Name: interface-name

Attribute Type: string

Attribute Name: mst-instance-id

Attribute Type: union

Attribute Name: bridge-id

Attribute Type: string

Netconf RPC payload

<clear-spanning-tree-statistics-per-interface-instance-and-bridge xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp">

<interface-name>IFNAME</interface-name>

<mst-instance-id>MSTP_INSTANCE_SPBM_TYPE_T</mst-instance-id>

<bridge-id>1</bridge-id>

</clear-spanning-tree-statistics-per-interface-instance-and-bridge>

Command Syntax

clear spanning-tree statistics interface IFNAME (spbm|<1-63>) bridge <1-32>

snmp restart mstp

Netconf RPC payload

<mstp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-xstp"/>

Command Syntax

snmp restart mstp

IPI-IF-AGGREGATE

Configure aggregate id

Channel group identifier

Attribute Name: aggregate-id

Attribute Type: uint16

Attribute Range: 1-16383

Attribute Name: agg-type

Attribute Type: enum (lacp|static)

Attribute Name: lacp-mode

Attribute Type: enum (passive|active)

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<member-aggregation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-aggregate">

<agg-type>2</agg-type>

<lacp-mode>1</lacp-mode>

<aggregate-id>1</aggregate-id>

</config>

</member-aggregation>

</interface>

</interfaces>

Command Syntax

static-channel-group <1-16383>

Configure lacp mode

Use this command to add a port to a channel group specified by the channel group number (1-12). This command enables link aggregation on a port, so that it may be selected for aggregation by the local system.

Attribute Name: lacp-mode

Attribute Type: enum (passive|active)

Attribute Name: agg-type

Attribute Type: enum (lacp|static)

Attribute Name: aggregate-id

Attribute Type: uint16

Attribute Range: 1-16383

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<member-aggregation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-if-aggregate">

<agg-type>1</agg-type>

<aggregate-id>1</aggregate-id>

<lacp-mode>passive</lacp-mode>

</config>

</member-aggregation>

</interface>

</interfaces>

Command Syntax

channel-group <1-16383> mode (passive|active)

Configure min links

Minimum number of active links required in this aggregator

Attribute Name: min-links

Attribute Type: uint8

Attribute Range: 2-32

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<min-links>2</min-links>

</config>

</aggregator>

</interface>

</interfaces>

Command Syntax

port-channel min-links <2-32>

Configure min bandwidth

Minimum number of bandwidth required in this aggregator

Attribute Name: min-bandwidth

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<min-bandwidth>BANDWIDTH</min-bandwidth>

</config>

</aggregator>

</interface>

</interfaces>

Command Syntax

port-channel min-bandwidth BANDWIDTH

IPI-LACP

Configure system priority

Use this attribute to the system priority of this switch. This priority is used for determining the system that is responsible for resolving conflicts in the choice of aggregation groups. A lower numerical value has a higher priority.

Attribute Name: system-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 0-65535

Netconf edit-config payload

<system-priority>0</system-priority>

</config>

</global>

</lacp>

Command Syntax

lacp system-priority <0-65535>

Configure options

This attribute returns the terminal debug options which are enabled

Attribute Name: options

Attribute Type: bits (event|cli|timer|packet|rx|tx|sync|ha|all)

Netconf edit-config payload

<debug>

<options>event</options>

</config>

</debug>

</lacp>

Command Syntax

debug lacp (event|cli|timer|packet|rx|tx|sync|ha|all)

Configure port priority

Use this attribute to set the priority of a channel. Channels are selected for aggregation based on their priority with the higher priority (numerically lower) channels selected first

Attribute Name: port-priority

Attribute Type: uint32

Default Value: 32768

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<member-aggregation>

<port-priority>1</port-priority>

</config>

</member-aggregation>

</interface>

</interfaces>

</lacp>

Command Syntax

lacp port-priority <1-65535>

Configure timeout

Use this attribute to set either a short or long timeout value on a port. The timeout value is the number of seconds before invalidating a received LACP data unit (DU). If the LACP_timeout bit (encoded in Actor_State and Partner_State fields) is set to 1, the short timeout takes effect; if set to 0, the long timeout takes effect.

Attribute Name: timeout

Attribute Type: enum (long|short)

Default Value: long

Netconf edit-config payload

</config>

<member-aggregation>

</config>

</member-aggregation>

</interface>

</interfaces>

</lacp>

Command Syntax

lacp timeout (long|short)

Configure bridge type

Use this attribute to set the address type to use for sending LACPDUs (Link Aggregation Control Protocol Data Units).

Attribute Name: bridge-type

Attribute Type: enum (customer-bridge-group-address|multicast-group-address|non-tmpr-group-address)

Default Value: multicast-group-address

Netconf edit-config payload

</config>

<member-aggregation>

<bridge-type>multicast-group-address</bridge-type>

</config>

</member-aggregation>

</interface>

</interfaces>

</lacp>

Command Syntax

lacp destination-mac (customer-bridge-group-address|multicast-group-address|non-tmpr-group-address)

Configure force up

Use this attribute to enable the port as force-up in a channel group. Setting this attribute makes the port logically operational even if link aggregation goes down.

Attribute Name: force-up

Attribute Type: empty

Netconf edit-config payload

</config>

<member-aggregation>

</force-up>

</config>

</member-aggregation>

</interface>

</interfaces>

</lacp>

Command Syntax

lacp force-up

Configure agg force up

Use this attribute to enable the port as lacp agg force-up

Attribute Name: agg-force-up

Attribute Type: empty

Netconf edit-config payload

</config>

<member-aggregation>

</agg-force-up>

</config>

</member-aggregation>

</interface>

</interfaces>

</lacp>

Command Syntax

lacp agg force-up

snmp restart lacp

Netconf RPC payload

<lacp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lacp"/>

Command Syntax

snmp restart lacp

clear lacp (<1-65535>|) counters

Attribute Name: aggregate-id

Attribute Type: uint16

Attribute Range: 1-65535

Netconf RPC payload

<clear-lacp-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lacp">

<aggregate-id>1</aggregate-id>

</clear-lacp-counters>

Command Syntax

clear lacp (<1-65535>|) counters

debug lacp (event|cli|timer|packet|rx|tx|sync|ha|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (event|cli|timer|packet|rx|tx|sync|ha|all)

Netconf RPC payload

<lacp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lacp">

<terminal-debug-options>event</terminal-debug-options>

</lacp-terminal-debug-on>

Command Syntax

debug lacp (event|cli|timer|packet|rx|tx|sync|ha|all)

no debug lacp (event|cli|timer|packet|rx|tx|sync|ha|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (event|cli|timer|packet|rx|tx|sync|ha|all)

Netconf RPC payload

<lacp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lacp">

<terminal-debug-options>event</terminal-debug-options>

</lacp-terminal-debug-off>

Command Syntax

no debug lacp (event|cli|timer|packet|rx|tx|sync|ha|all)

IPI-LLDPV2

Configure enable

Enable or disable the LLDP protocol at node level

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

</enable>

</config>

</global>

</lldp>

Command Syntax

lldp run

Configure enable tx rx only

Specifies to only send or receive LLDP frames

Attribute Name: enable-tx-rx-only

Attribute Type: enum (rxonly|txonly)

Netconf edit-config payload

<enable-tx-rx-only>rxonly</enable-tx-rx-only>

</config>

</global>

</lldp>

Command Syntax

set lldp enable (rxonly|txonly)

Configure notification interval

This object controls the interval between transmission of LLDP notifications during normal transmission periods

Attribute Name: notification-interval

Attribute Type: uint16

Default Value: 30

Attribute Range: 5-3600

Netconf edit-config payload

<notification-interval>5</notification-interval>

</config>

</global>

</lldp>

Command Syntax

lldp notification-interval <5-3600>

Configure port description

This attribute specifies to include basic management port description information in LLDP TLV

Attribute Name: port-description

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-basic-management>

</port-description>

</config>

</global-basic-management>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select basic-mgmt port-description

Configure system description

This attribute specifies to include basic management system description information in LLDP TLV

Attribute Name: system-description

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-basic-management>

</system-description>

</config>

</global-basic-management>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select basic-mgmt system-description

Configure system name

This attribute specifies to include basic management system name information in LLDP TLV

Attribute Name: system-name

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-basic-management>

</system-name>

</config>

</global-basic-management>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select basic-mgmt system-name

Configure system capabilities

This attribute specifies to include basic management system capabilities information in LLDP TLV

Attribute Name: system-capabilities

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-basic-management>

</system-capabilities>

</config>

</global-basic-management>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select basic-mgmt system-capabilities

Configure management address

This attribute specifies to include basic management management-address information in LLDP TLV

Attribute Name: management-address

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-basic-management>

</management-address>

</config>

</global-basic-management>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select basic-mgmt management-address

Configure port vlan id

This attribute specifies to include ieee-8021-org-specific port vlan-id information in LLDP TLV

Attribute Name: port-vlan-id

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</port-vlan-id>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific port-vlanid

Configure port protocol vlan id

This attribute specifies to include ieee-8021-org-specific port protocol vlan-id information in LLDP TLV

Attribute Name: port-protocol-vlan-id

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</port-protocol-vlan-id>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific port-ptcl-vlanid

Configure vlan name

This attribute specifies to include ieee-8021-org-specific vlan name information in LLDP TLV

Attribute Name: vlan-name

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</vlan-name>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific vlan-name

Configure protocol identifier

This attribute specifies to include ieee-8021-org-specific protocol identifier information in LLDP TLV

Attribute Name: protocol-identifier

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</protocol-identifier>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific ptcl-identity

Configure vid digest

This attribute specifies to include ieee-8021-org-specific vid usage digest information in LLDP TLV

Attribute Name: vid-digest

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</vid-digest>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific vid-digest

Configure management vlan id

This attribute specifies to include ieee-8021-org-specific management vlan-id information in LLDP TLV

Attribute Name: management-vlan-id

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</management-vlan-id>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific mgmt-vid

Configure link aggregation

This attribute specifies to include ieee-8021-org-specific link aggregation information in LLDP TLV

Attribute Name: link-aggregation

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</link-aggregation>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific link-agg

Configure dcb exchange

This attribute specifies to include ieee-8021-org-specific data center bridging information in LLDP TLV

Attribute Name: dcb-exchange

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8021-org-specific>

</dcb-exchange>

</config>

</global-ieee-8021-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8021-org-specific data-center-bridging

Configure mac phy

This attribute specifies to include ieee-8023-org-specific MAC or PHY information in LLDP TLV

Attribute Name: mac-phy

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8023-org-specific>

</mac-phy>

</config>

</global-ieee-8023-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8023-org-specific mac-phy

Configure max mtu size

This attribute specifies to include ieee-8023-org-specific maximum mtu size information in LLDP TLV

Attribute Name: max-mtu-size

Attribute Type: empty

Netconf edit-config payload

<global-tlv-control>

<global-ieee-8023-org-specific>

</max-mtu-size>

</config>

</global-ieee-8023-org-specific>

</global-tlv-control>

</global>

</lldp>

Command Syntax

lldp tlv-select ieee-8023-org-specific max-mtu-size

Configure locally assigned chassis id

This attribute used to identify the chassis component associated with the local system

Attribute Name: locally-assigned-chassis-id

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<management-if>

<locally-assigned-chassis-id>NAME</locally-assigned-chassis-id>

</config>

</management-if>

</global>

</lldp>

Command Syntax

set lldp chassis locally-assigned NAME

Configure reinit delay

The minimum time interval an LLDP port waits before re-initializing an LLDP transmission

Attribute Name: reinit-delay

Attribute Type: uint32

Default Value: 2

Attribute Range: 1-10

Netconf edit-config payload

<reinit-delay>1</reinit-delay>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp timer reinit-delay <1-10>

Configure message tx interval

The delay between successive LLDP frame transmissions during normal transmission periods

Attribute Name: message-tx-interval

Attribute Type: uint32

Default Value: 30

Attribute Range: 5-3600

Netconf edit-config payload

<message-tx-interval>5</message-tx-interval>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp timer msg-tx-interval <5-3600>

Configure message tx hold multiplier

Multiplier of message-tx-interval to determine the Time To Live (TTL) that is carried in LLDP frames transmitted by the LLDP agent

Attribute Name: message-tx-hold-multiplier

Attribute Type: uint32

Default Value: 4

Attribute Range: 1-100

Netconf edit-config payload

<message-tx-hold-multiplier>1</message-tx-hold-multiplier>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp msg-tx-hold <1-100>

Configure message fast tx

The interval at which LLDP frames are transmitted on behalf of LLDP agent during fast transmission periods

Attribute Name: message-fast-tx

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-3600

Netconf edit-config payload

<message-fast-tx>1</message-fast-tx>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp timer msg-fast-tx <1-3600>

Configure tx credit max

The maximum number of consecutive LLDPDUs that can be transmitted at any time

Attribute Name: tx-credit-max

Attribute Type: uint32

Default Value: 5

Attribute Range: 1-10

Netconf edit-config payload

<tx-credit-max>1</tx-credit-max>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp tx-max-credit <1-10>

Configure tx fast init

The number of LLDPDUs to send during the fast transmission periods

Attribute Name: tx-fast-init

Attribute Type: uint32

Default Value: 4

Attribute Range: 1-8

Netconf edit-config payload

<tx-fast-init>1</tx-fast-init>

</config>

</transmit>

</global>

</lldp>

Command Syntax

set lldp tx-fast-init <1-8>

Configure neighbor timer

This attribute configures timer to discard received message when remote table is full

Attribute Name: neighbor-timer

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: neighbor-limit

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<neighbor-limit>1</neighbor-limit>

<neighbor-timer>1</neighbor-timer>

</config>

</receive>

</global>

</lldp>

Command Syntax

set lldp too-many-neighbors limit <1-65535> discard received-info timer <1-65535>

Configure port timer

This attribute configures timer to discard or delete existing info for received message port MAC when the remote table is full

Attribute Name: port-timer

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: neighbor-limit

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: port-mac

Attribute Type: string

Netconf edit-config payload

<neighbor-limit>1</neighbor-limit>

<port-mac>MAC</port-mac>

<port-timer>1</port-timer>

</config>

</receive>

</global>

</lldp>

Command Syntax

set lldp too-many-neighbors limit <1-65535> discard existing-info MAC timer <1-65535>

Configure port address

This attribute specifies sub type of the Management Address TLV. Can be configured as mac-address, ip-address or ipv6-address

Attribute Name: port-address

Attribute Type: enum (mac-address|ip-address|ipv6-address)

Default Value: mac-address

Netconf edit-config payload

<agent-tlv>

<port-address>mac-address</port-address>

</config>

</agent-tlv>

</global>

</lldp>

Command Syntax

set lldp management-address-tlv (mac-address|ip-address|ipv6-address)

Configure chassis id

This attribute specifies chassis ID subtype for the LLDP agent on a port. Can be configured as if-alias or ip-address or ipv6-address or mac-address or if-name or locally-assgined name

Attribute Name: chassis-id

Default Value: mac-address

Netconf edit-config payload

<agent-tlv>

<chassis-id>mac-address</chassis-id>

</config>

</agent-tlv>

</global>

</lldp>

Command Syntax

Configure port id

This attribute specifies sub type of the port id TLV. Can be configured as if-alias or mac-address or ip-address or ipv6-address or if-name or agent-circuit-id or locally assigned name

Attribute Name: port-id

Default Value: mac-address

Netconf edit-config payload

<agent-tlv>

<port-id>mac-address</port-id>

</config>

</agent-tlv>

</global>

</lldp>

Command Syntax

Configure options

This attribute returns the terminal debug options which are enabled

Attribute Name: options

Attribute Type: bits (event|rx|tx|message|ha|all)

Netconf edit-config payload

<debug>

<options>event</options>

</config>

</debug>

</lldp>

Command Syntax

debug lldp (event|rx|tx|message|ha|all)

Configure disable lldp agent

Use this attribute to disable LLDP on interface when it is enabled globally

Attribute Name: disable-lldp-agent

Attribute Type: uint8

Netconf edit-config payload

</config>

</disable-lldp-agent>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp disable default-agent

Configure agent circuit id

DHCP agent circuit ID association on interface

Attribute Name: agent-circuit-id

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<agent-circuit-id>VALUE</agent-circuit-id>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp agt-circuit-id VALUE

Configure med device type

LLDP-MED type of interface. Class-0 is not defined, Class-1 is for generic endpoints and is applicable to all endpoints that require the base LLDP discovery services. Class-2 is for media endpoints and it includes endpoints that have IP media capabilities. Class-3 is for communication endpoints i.e., devices acting as end user communication applicances. Calss-4 is for Network Connectivity Device. Class 5-255 are Reserved

Attribute Name: med-device-type

Attribute Type: enum (ep-class1|ep-class2|ep-class3|net-connect)

Netconf edit-config payload

</config>

<med-device-type>ep-class1</med-device-type>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp med-devtype (ep-class1|ep-class2|ep-class3|net-connect)

Configure local name

Interface sub type with local name

Attribute Name: local-name

Attribute Type: string

Netconf edit-config payload

</config>

<local-name>NAME</local-name>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp locally-assigned NAME

Configure agent type

LLDP agent type on this interface

Attribute Name: agent-type

Attribute Type: enum (non-tpmr-bridge|customer-bridge|default)

Netconf edit-config payload

</config>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp-agent (non-tpmr-bridge|customer-bridge|)

Configure enable tx rx

Enables interface with LLDP protocol and specifies to send and(or) receive packets on interface

Attribute Name: enable-tx-rx

Attribute Type: enum (rxonly|txonly|txrx)

Default Value: rxonly

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<enable-tx-rx>rxonly</enable-tx-rx>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp enable (rxonly|txonly|txrx)

Configure disable tx rx

Disables interface with LLDP protocol

Attribute Name: disable-tx-rx

Attribute Type: empty

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

</disable-tx-rx>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp disable

Configure dcbx enable

Use this attribute to enable/disable DCBX on the given interface

Attribute Name: dcbx-enable

Attribute Type: boolean

Default Value: false

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<dcbx-enable>true</dcbx-enable>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

dcbx (disable|enable)

Configure name

The minimum time interval an LLDP port waits before re-initializing an LLDP transmission

Attribute Name: reinit-delay

Attribute Type: uint32

Default Value: 2

Attribute Range: 1-10

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<reinit-delay>1</reinit-delay>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp timer reinit-delay <1-10>

Configure transmit message-tx-interval

The delay between successive LLDP frame transmissions during normal transmission periods

Attribute Name: message-tx-interval

Attribute Type: uint32

Default Value: 30

Attribute Range: 5-3600

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<message-tx-interval>5</message-tx-interval>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp timer msg-tx-interval <5-3600>

Configure transmit message-tx-hold-multiplier

Multiplier of message-tx-interval to determine the Time To Live (TTL) that is carried in LLDP frames transmitted by the LLDP agent

Attribute Name: message-tx-hold-multiplier

Attribute Type: uint32

Default Value: 4

Attribute Range: 1-100

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<message-tx-hold-multiplier>1</message-tx-hold-multiplier>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp msg-tx-hold <1-100>

Configure transmit message-fast-tx

The interval at which LLDP frames are transmitted on behalf of LLDP agent during fast transmission periods

Attribute Name: message-fast-tx

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<message-fast-tx>1</message-fast-tx>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp timer msg-fast-tx <1-3600>

Configure transmit tx-credit-max

The maximum number of consecutive LLDPDUs that can be transmitted at any time

Attribute Name: tx-credit-max

Attribute Type: uint32

Default Value: 5

Attribute Range: 1-10

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tx-credit-max>1</tx-credit-max>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp tx-max-credit <1-10>

Configure transmit tx-fast-init

The number of LLDPDUs to send during the fast transmission periods

Attribute Name: tx-fast-init

Attribute Type: uint32

Default Value: 4

Attribute Range: 1-8

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tx-fast-init>1</tx-fast-init>

</config>

</transmit>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp tx-fast-init <1-8>

Configure neighbor limit

This attribute configures timer to discard received message when remote table is full

Attribute Name: neighbor-timer

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: neighbor-limit

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<neighbor-limit>1</neighbor-limit>

<neighbor-timer>1</neighbor-timer>

</config>

</receive>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp too-many-neighbors limit <1-65535> discard received-info timer <1-65535>

Configure port mac

This attribute configures timer to discard or delete existing info for received message port MAC when the remote table is full

Attribute Name: port-timer

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: neighbor-limit

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: port-mac

Attribute Type: string

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<neighbor-limit>1</neighbor-limit>

<port-mac>MAC</port-mac>

<port-timer>1</port-timer>

</config>

</receive>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp too-many-neighbors limit <1-65535> discard existing-info MAC timer <1-65535>

Configure agent-tlv port-address

This attribute specifies sub type of the Management Address TLV. Can be configured as mac-address, ip-address or ipv6-address

Attribute Name: port-address

Attribute Type: enum (mac-address|ip-address|ipv6-address)

Default Value: mac-address

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<agent-tlv>

<port-address>mac-address</port-address>

</config>

</agent-tlv>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

set lldp management-address-tlv (mac-address|ip-address|ipv6-address)

Configure agent-tlv chassis-id

This attribute specifies chassis ID subtype for the LLDP agent on a port. Can be configured as if-alias or ip-address or ipv6-address or mac-address or if-name or locally-assgined name

Attribute Name: chassis-id

Default Value: mac-address

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<agent-tlv>

<chassis-id>mac-address</chassis-id>

</config>

</agent-tlv>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

Configure agent-tlv port-id

This attribute specifies sub type of the port id TLV. Can be configured as if-alias or mac-address or ip-address or ipv6-address or if-name or agent-circuit-id or locally assigned name

Attribute Name: port-id

Default Value: mac-address

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<agent-tlv>

<port-id>mac-address</port-id>

</config>

</agent-tlv>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

Configure basic-management port-description

This attribute specifies to include basic management port description information in LLDP TLV

Attribute Name: port-description

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<basic-management>

<port-description>not-set</port-description>

</config>

</basic-management>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv basic-mgmt port-description (select|unselect)

Configure basic-management system-description

This attribute specifies to include basic management system description information in LLDP TLV

Attribute Name: system-description

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<basic-management>

<system-description>not-set</system-description>

</config>

</basic-management>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv basic-mgmt system-description (select|unselect)

Configure basic-management system-name

This attribute specifies to include basic management system name information in LLDP TLV

Attribute Name: system-name

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<basic-management>

<system-name>not-set</system-name>

</config>

</basic-management>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv basic-mgmt system-name (select|unselect)

Configure basic-management system-capabilities

This attribute specifies to include basic management system capabilities information in LLDP TLV

Attribute Name: system-capabilities

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<basic-management>

<system-capabilities>not-set</system-capabilities>

</config>

</basic-management>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv basic-mgmt system-capabilities (select|unselect)

Configure basic-management management-address

This attribute specifies to include basic management management-address information in LLDP TLV

Attribute Name: management-address

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<basic-management>

<management-address>not-set</management-address>

</config>

</basic-management>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv basic-mgmt management-address (select|unselect)

Configure ieee-8021-org-specific port-vlan-id

This attribute specifies to include ieee-8021-org-specific port vlan-id information in LLDP TLV

Attribute Name: port-vlan-id

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<port-vlan-id>not-set</port-vlan-id>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific port-vlanid (select|unselect)

Configure ieee-8021-org-specific port-protocol-vlan-id

This attribute specifies to include ieee-8021-org-specific port protocol vlan-id information in LLDP TLV

Attribute Name: port-protocol-vlan-id

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<port-protocol-vlan-id>not-set</port-protocol-vlan-id>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific port-ptcl-vlanid (select|unselect)

Configure ieee-8021-org-specific vlan-name

This attribute specifies to include ieee-8021-org-specific vlan name information in LLDP TLV

Attribute Name: vlan-name

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<vlan-name>not-set</vlan-name>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific vlan-name (select|unselect)

Configure ieee-8021-org-specific protocol-identifier

This attribute specifies to include ieee-8021-org-specific protocol identifier information in LLDP TLV

Attribute Name: protocol-identifier

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<protocol-identifier>not-set</protocol-identifier>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific ptcl-identity (select|unselect)

Configure ieee-8021-org-specific vid-digest

This attribute specifies to include ieee-8021-org-specific vid usage digest information in LLDP TLV

Attribute Name: vid-digest

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<vid-digest>not-set</vid-digest>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific vid-digest (select|unselect)

Configure ieee-8021-org-specific management-vlan-id

This attribute specifies to include ieee-8021-org-specific management vlan-id information in LLDP TLV

Attribute Name: management-vlan-id

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<management-vlan-id>not-set</management-vlan-id>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific mgmt-vid (select|unselect)

Configure ieee-8021-org-specific link-aggregation

This attribute specifies to include ieee-8021-org-specific link aggregation information in LLDP TLV

Attribute Name: link-aggregation

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific link-agg (select|unselect)

Configure ieee-8021-org-specific dcb-exchange

This attribute specifies to include ieee-8021-org-specific data center bridging information in LLDP TLV

Attribute Name: dcb-exchange

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8021-org-specific>

<dcb-exchange>not-set</dcb-exchange>

</config>

</ieee-8021-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8021-org-specific data-center-bridging (select|unselect)

Configure ieee-8023-org-specific mac-phy

This attribute specifies to include ieee-8023-org-specific MAC or PHY information in LLDP TLV

Attribute Name: mac-phy

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8023-org-specific>

<mac-phy>not-set</mac-phy>

</config>

</ieee-8023-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8023-org-specific mac-phy (select|unselect)

Configure ieee-8023-org-specific max-mtu-size

This attribute specifies to include ieee-8023-org-specific maximum mtu size information in LLDP TLV

Attribute Name: max-mtu-size

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<ieee-8023-org-specific>

<max-mtu-size>not-set</max-mtu-size>

</config>

</ieee-8023-org-specific>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv ieee-8023-org-specific max-mtu-size (select|unselect)

Configure network policy

Network policy information configured on the port for connected media endpoint. Following network policy will be supported VLAN ID, Priority Tagging, VLAN DSCP

Attribute Name: network-policy

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<tlv-media-capabilities>

<network-policy>not-set</network-policy>

</config>

</tlv-media-capabilities>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv med network-policy (select|unselect)

Configure location

Media Tlv type Location information configured for the port

Attribute Name: location

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<tlv-media-capabilities>

</config>

</tlv-media-capabilities>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv med location (select|unselect)

Configure inventory

Includes the TLV for information like hardware revision, software revision etc based on the current hardware platform and the software version

Attribute Name: inventory

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<tlv-media-capabilities>

</config>

</tlv-media-capabilities>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv med inventory (select|unselect)

Configure media capabilities

Includes various media-capabilities of the box for the neighbor

Attribute Name: media-capabilities

Attribute Type: enum (not-set|select|unselect)

Default Value: not-set

Netconf edit-config payload

</config>

<agent>

<agent-type>default</agent-type>

<agent-type>default</agent-type>

</config>

<tlv-control>

<tlv-media-capabilities>

<media-capabilities>not-set</media-capabilities>

</config>

</tlv-media-capabilities>

</tlv-control>

</agent>

</agents>

</interface>

</interfaces>

</lldp>

Command Syntax

lldp tlv med media-capabilities (select|unselect)

debug lldp (event|rx|tx|message|ha|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (event|rx|tx|message|ha|all)

Netconf RPC payload

<lldp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">

<terminal-debug-options>event</terminal-debug-options>

</lldp-terminal-debug-on>

Command Syntax

debug lldp (event|rx|tx|message|ha|all)

no debug lldp (event|rx|tx|message|ha|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (event|rx|tx|message|ha|all)

Netconf RPC payload

<lldp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">

<terminal-debug-options>event</terminal-debug-options>

</lldp-terminal-debug-off>

Command Syntax

no debug lldp (event|rx|tx|message|ha|all)

clear lldp counters ((IFNAME|)|)

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<clear-lldp-counter xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">

<interface-name>IFNAME</interface-name>

</clear-lldp-counter>

Command Syntax

clear lldp counters ((IFNAME|)|)

snmp restart lldp

Netconf RPC payload

<lldp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2"/>

Command Syntax

snmp restart lldp

IPI-RIB

Configure prefix

Use this attribute to configure a prefix for an IPv4 static route (e.g. 10.0.0.0/8)

Attribute Name: prefix

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D)

Configure gateway

Use this attribute to configure an IPv4 gateway address for next hop for this destination prefix

Attribute Name: gateway

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) A.B.C.D

Configure bfd state

Use this attribute to set fall-over detection.

Attribute Name: bfd-state

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

<bfd-state>disable</bfd-state>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip static (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) A.B.C.D fall-over-bfd (disable|enable)

Configure description

Use this attribute to set the description of this static route.

Attribute Name: description

Attribute Type: string

Attribute Name: interface

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: recursive

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<interface>IFNAME</interface>

<track-id>1</track-id>

</recursive>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure instance name

Use this attribute to set the description of this static route.

Attribute Name: description

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: recursive

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<track-id>1</track-id>

</recursive>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure recursive

Use this attribute to enable recursive resolution for this route.

Attribute Name: recursive

Attribute Type: empty

Attribute Name: interface

Attribute Type: string

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<interface>IFNAME</interface>

</enable-global-table-lookup>

<track-id>1</track-id>

</config>

</recursive>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) A.B.C.D IFNAME global (track <1-500>|) (recursive|)

Configure enable global table lookup

Use this attribute to create an VRF static route with gateway in default VRF table.

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

</enable-global-table-lookup>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) A.B.C.D global

Configure interface

Use this attribute to configure a interface for next hop for this destination prefix

Attribute Name: interface

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</config>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) IFNAME

Configure instance type

Use this attribute to set the description of this static route.

Attribute Name: description

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

<track-id>1</track-id>

</config>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure track id

Use this attribute to track a object.

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</enable-global-table-lookup>

</config>

<track-id>1</track-id>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) IFNAME global (track <1-500>|)

Configure next-hop-interface enable-global-table-lookup

Use this attribute to create an VRF static route with gateway in default VRF table.

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv4>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</config>

</enable-global-table-lookup>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv4>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ip route (vrf NAME|) (A.B.C.D/M|A.B.C.D A.B.C.D) IFNAME global

Configure ipv6 prefix

Use this attribute to configure a prefix for an IPv6 static route (e.g. 3ffe:506::/32)

This command is supported when following feature are enabled ipv6 feature

Attribute Name: prefix

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X)

Configure next-hops-gateway gateway

Use this attribute to configure an IPv6 gateway address for next hop for this destination prefix

This command is supported when following feature are enabled ipv6 feature

Attribute Name: gateway

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) X:X::X:X

Configure next-hop-gateway bfd-state

Use this attribute to set fall-over detection.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: bfd-state

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

<bfd-state>disable</bfd-state>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 static (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) X:X::X:X fall-over-bfd (disable|enable)

Configure distance

Use this attribute to set the description of this static route.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: description

Attribute Type: string

Attribute Name: interface

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: recursive

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<interface>IFNAME</interface>

<track-id>1</track-id>

</recursive>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure next-hop-gateway description

Use this attribute to set the description of this static route.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: description

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: recursive

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<track-id>1</track-id>

</recursive>

</config>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure next-hop-gateway recursive

Use this attribute to enable recursive resolution for this route.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: recursive

Attribute Type: empty

Attribute Name: interface

Attribute Type: string

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

<interface>IFNAME</interface>

</enable-global-table-lookup>

<track-id>1</track-id>

</config>

</recursive>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) X:X::X:X IFNAME global (track <1-500>|) (recursive|)

Configure next-hop-gateway enable-global-table-lookup

Use this attribute to create an VRF static route with gateway in default VRF table.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-gateway>

<next-hop-gateway>

</config>

</enable-global-table-lookup>

</next-hop-gateway>

</next-hops-gateway>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) X:X::X:X global

Configure next-hops-interface interface

Use this attribute to configure a interface for next hop for this destination prefix

This command is supported when following feature are enabled ipv6 feature

Attribute Name: interface

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</config>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) IFNAME

Configure next-hop-interface description

Use this attribute to set the description of this static route.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: description

Attribute Type: string

Attribute Name: distance

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-255

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

<track-id>1</track-id>

</config>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

Configure next-hop-interface track-id

Use this attribute to track a object.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: track-id

Attribute Type: uint16

Attribute Range: 1-500

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</enable-global-table-lookup>

</config>

<track-id>1</track-id>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) IFNAME global (track <1-500>|)

Configure next-hop-interface enable-global-table-lookup

Use this attribute to create an VRF static route with gateway in default VRF table.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: enable-global-table-lookup

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routing xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<ipv6>

<static-route>

</config>

<next-hops-interface>

<next-hop-interface>

<interface>IFNAME</interface>

<interface>IFNAME</interface>

</config>

</enable-global-table-lookup>

</next-hop-interface>

</next-hops-interface>

</static-route>

</ipv6>

</static-routing>

</network-instance>

</network-instances>

Command Syntax

ipv6 route (vrf NAME|) (X:X::X:X/M|X:X::X:X X:X::X:X) IFNAME global

Configure fib retain

Use this attribute to configure retain time for stale routes (forever or specific time in seconds) in FIB after RIB restarts

Attribute Name: fib-retain

Attribute Type: union

Default Value: 60

Netconf edit-config payload

<fib-retain>60</fib-retain>

</config>

</global>

</routing>

Command Syntax

fib retain (time <1-65535>|forever|)

Configure max ecmp paths

Use this attribute to set the maximum number of paths to install in the FIB (Forwarding Information Base) for the ECMP (Equal-Cost MultiPath) feature.

Attribute Name: max-ecmp-paths

Attribute Type: uint8

Default Value: 8

Attribute Range: 1-64

Netconf edit-config payload

<max-ecmp-paths>1</max-ecmp-paths>

</config>

</global>

</routing>

Command Syntax

maximum-paths <1-64>

Configure max static routes

Use this attribute to set the maximum number of static routes.

Attribute Name: max-static-routes

Attribute Type: uint32

Default Value: 4294967294

Attribute Range: 1-4294967294

Netconf edit-config payload

<max-static-routes>1</max-static-routes>

</config>

</global>

</routing>

Command Syntax

max-static-routes <1-4294967294>

Configure max fib routes

Use this attribute to set the maximum number of FIB (Forwarding Information Base) routes excluding kernel, connected, and static routes.

Attribute Name: max-fib-routes

Attribute Type: uint32

Attribute Range: 1-16384

Netconf edit-config payload

<max-fib-routes>1</max-fib-routes>

</config>

</global>

</routing>

Command Syntax

max-fib-routes <1-16384>

Configure ipv4 enable bfd all interfaces

Use this attribute to enable static BFD on all interfaces.

Attribute Name: ipv4-enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

</ipv4-enable-bfd-all-interfaces>

</config>

</global>

</routing>

Command Syntax

ip bfd static all-interfaces

Configure ipv6 enable bfd all interfaces

Use this attribute to enable ipv6 static BFD on all interfaces.

Attribute Name: ipv6-enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

</ipv6-enable-bfd-all-interfaces>

</config>

</global>

</routing>

Command Syntax

ipv6 bfd static all-interfaces

Configure rib options

Use this attribute to debug the ribd process.

Attribute Name: rib-options

Netconf edit-config payload

<debug>

<rib-options>all</rib-options>

</config>

</debug>

</routing>

Command Syntax

Configure ipv4 routing options

Use this attribute to debug ip route.

Attribute Name: ipv4-routing-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf edit-config payload

<debug>

<ipv4-routing-options>all</ipv4-routing-options>

</config>

</debug>

</routing>

Command Syntax

debug ip routing (all|add-route|delete-route|mod-route)

Configure ipv6 routing options

Use this attribute to debug ipv6 route.

Attribute Name: ipv6-routing-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf edit-config payload

<debug>

<ipv6-routing-options>all</ipv6-routing-options>

</config>

</debug>

</routing>

Command Syntax

debug ipv6 routing (all|add-route|delete-route|mod-route)

Configure source prefix

Use this attribute to configure administrative distance for mroute.

Attribute Name: distance

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: gateway-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<static-routes>

<ipv4>

<multicast-routes>

<multicast-route>

<protocol-type>default</protocol-type>

<protocol-type>default</protocol-type>

<source-prefix>A.B.C.D/M</source-prefix>

<gateway-address>A.B.C.D</gateway-address>

</config>

<source-prefix>A.B.C.D/M</source-prefix>

</multicast-route>

</multicast-routes>

</ipv4>

</static-routes>

</routing>

Command Syntax

ip mroute A.B.C.D/M ((static|rip|ospf|bgp|isis)|) A.B.C.D (<0-255>|)

Configure protocol type

Use this attribute to configure administrative distance for mroute.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: distance

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: gateway-mroute

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<static-routes>

<ipv6>

<multicast-routes>

<multicast-route>

<protocol-type>default</protocol-type>

<protocol-type>default</protocol-type>

<source-prefix>X:X::X:X/M</source-prefix>

</config>

<source-prefix>X:X::X:X/M</source-prefix>

<gateway-mroute>X:X::X:X</gateway-mroute>

</config>

</nexthop>

</multicast-route>

</multicast-routes>

</ipv6>

</static-routes>

</routing>

Command Syntax

ipv6 mroute X:X::X:X/M ((static|rip|ospf|bgp|isis)|) X:X::X:X (<0-255>|)

Configure ipv4 enable bfd

Use this attribute to enable or disable Bidirectional Forwarding Detection static routes.

This command is supported when following feature are enabled bfd feature

Attribute Name: ipv4-enable-bfd

Attribute Type: enum (enable|disable)

Netconf edit-config payload

</config>

<bfd>

<ipv4-enable-bfd>enable</ipv4-enable-bfd>

</config>

</bfd>

</interface>

</interfaces>

</routing>

Command Syntax

ip static bfd (enable|disable)

Configure ipv6 enable bfd

Use this attribute to enable or disable Bidirectional Forwarding Detection static routes.

This command is supported when following feature are enabled bfd feature

Attribute Name: ipv6-enable-bfd

Attribute Type: enum (enable|disable)

Netconf edit-config payload

</config>

<bfd>

<ipv6-enable-bfd>enable</ipv6-enable-bfd>

</config>

</bfd>

</interface>

</interfaces>

</routing>

Command Syntax

ipv6 static bfd (enable|disable)

snmp restart rib

Netconf RPC payload

<rib-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

snmp restart rib

clear ip route kernel

Netconf RPC payload

<clear-ip-stale-kernel-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ip route kernel

clear ip kernel route

Netconf RPC payload

<clear-ip-kernel-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ip kernel route

clear ipv6 route kernel

Netconf RPC payload

<clear-ipv6-stale-kernel-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ipv6 route kernel

clear ip route *

Netconf RPC payload

<clear-ip-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ip route *

clear ip route A.B.C.D/M

Attribute Name: prefix-address

Attribute Type: string

Netconf RPC payload

<clear-ip-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<prefix-address>A.B.C.D/M</prefix-address>

</clear-ip-route>

Command Syntax

clear ip route A.B.C.D/M

clear ipv4 route *

Netconf RPC payload

<clear-ipv4-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ipv4 route *

clear ipv4 route A.B.C.D/M

Attribute Name: prefix-address

Attribute Type: string

Netconf RPC payload

<clear-ipv4-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<prefix-address>A.B.C.D/M</prefix-address>

</clear-ipv4-route>

Command Syntax

clear ipv4 route A.B.C.D/M

clear ipv6 route *

Netconf RPC payload

<clear-ipv6-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib"/>

Command Syntax

clear ipv6 route *

clear ipv6 route X:X::X:X/M

Attribute Name: prefix-ipv6-address

Attribute Type: string

Netconf RPC payload

<clear-ipv6-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<prefix-ipv6-address>X:X::X:X/M</prefix-ipv6-address>

</clear-ipv6-route>

Command Syntax

clear ipv6 route X:X::X:X/M

Attribute Name: terminal-debug-options

Netconf RPC payload

<rib-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<rib-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-off>

Command Syntax

debug ip routing (all|add-route|delete-route|mod-route)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf RPC payload

<rib-terminal-debug-ipv4-routing-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-ipv4-routing-on>

Command Syntax

debug ip routing (all|add-route|delete-route|mod-route)

no debug ip routing (all|add-route|delete-route|mod-route)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf RPC payload

<rib-terminal-debug-ipv4-routing-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-ipv4-routing-off>

Command Syntax

no debug ip routing (all|add-route|delete-route|mod-route)

debug ipv6 routing (all|add-route|delete-route|mod-route)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf RPC payload

<rib-terminal-debug-ipv6-routing-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-ipv6-routing-on>

Command Syntax

debug ipv6 routing (all|add-route|delete-route|mod-route)

no debug ipv6 routing (all|add-route|delete-route|mod-route)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|add-route|delete-route|mod-route)

Netconf RPC payload

<rib-terminal-debug-ipv6-routing-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib">

<terminal-debug-options>all</terminal-debug-options>

</rib-terminal-debug-ipv6-routing-off>

Command Syntax

no debug ipv6 routing (all|add-route|delete-route|mod-route)

IPI-RIB-VRF

Configure ipv4 enable bfd all interfaces

Use this attribute to enable static BFD on all interfaces.

Attribute Name: ipv4-enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

</ipv4-enable-bfd-all-interfaces>

</config>

</global>

</vrf>

</network-instance>

</network-instances>

Command Syntax

ip bfd vrf NAME static all-interfaces

Configure ipv6 enable bfd all interfaces

Use this attribute to enable ipv6 static BFD on all interfaces.

Attribute Name: ipv6-enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

</ipv6-enable-bfd-all-interfaces>

</config>

</global>

</vrf>

</network-instance>

</network-instances>

Command Syntax

ipv6 bfd vrf NAME static all-interfaces

Configure distance

Use this attribute to configure administrative distance for mroute.

Attribute Name: distance

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: gateway-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv4>

<multicast-routes>

<multicast-route>

<protocol-type>default</protocol-type>

<protocol-type>default</protocol-type>

<source-prefix>A.B.C.D/M</source-prefix>

<gateway-address>A.B.C.D</gateway-address>

</config>

<source-prefix>A.B.C.D/M</source-prefix>

</multicast-route>

</multicast-routes>

</ipv4>

</static-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

ip mroute vrf NAME A.B.C.D/M ((static|rip|ospf|bgp|isis)|) A.B.C.D (<0-255>|)

Configure instance name

Use this attribute to configure administrative distance for mroute.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: distance

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: gateway-mroute

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>NAME</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<static-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv6>

<multicast-routes>

<multicast-route>

<protocol-type>default</protocol-type>

<protocol-type>default</protocol-type>

<source-prefix>X:X::X:X/M</source-prefix>

</config>

<source-prefix>X:X::X:X/M</source-prefix>

<gateway-mroute>X:X::X:X</gateway-mroute>

</config>

</nexthop>

</multicast-route>

</multicast-routes>

</ipv6>

</static-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

ipv6 mroute vrf NAME X:X::X:X/M ((static|rip|ospf|bgp|isis)|) X:X::X:X (<0-255>|)

Configure max limit

Use this attribute to limit the maximum number of routes to be installed in VRF FIB.

Attribute Name: max-limit

Attribute Type: uint32

Attribute Range: 1-2147483647

Attribute Name: limit-action

Attribute Type: enum (stop-install|warning-only)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<maximum-fib-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv4>

<limit-action>stop-install</limit-action>

<max-limit>1</max-limit>

</config>

</ipv4>

</maximum-fib-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

maximum-fib-routes ipv4 <1-2147483647> (stop-install|warning-only)

Configure warning threshold

Use this attribute to define a percentage of the maximum route limit which when crossed results in a warning message and Netconf notification being raised. Default is 80%.

Attribute Name: warning-threshold

Attribute Type: uint8

Default Value: 80

Attribute Range: 1-100

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<maximum-fib-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv4>

<warning-threshold>1</warning-threshold>

</config>

</ipv4>

</maximum-fib-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

maximum-fib-routes ipv4 threshold <1-100>

Configure instance type

Use this attribute to limit the maximum number of routes to be installed in VRF FIB.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: max-limit

Attribute Type: uint32

Attribute Range: 1-2147483647

Attribute Name: limit-action

Attribute Type: enum (stop-install|warning-only)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<maximum-fib-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv6>

<limit-action>stop-install</limit-action>

<max-limit>1</max-limit>

</config>

</ipv6>

</maximum-fib-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

maximum-fib-routes ipv6 <1-2147483647> (stop-install|warning-only)

Configure ipv6 warning-threshold

Use this attribute to define a percentage of the maximum route limit which when crossed results in a warning message and Netconf notification being raised. Default is 80%.

This command is supported when following feature are enabled ipv6 feature

Attribute Name: warning-threshold

Attribute Type: uint8

Default Value: 80

Attribute Range: 1-100

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<maximum-fib-routes xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<ipv6>

<warning-threshold>1</warning-threshold>

</config>

</ipv6>

</maximum-fib-routes>

</vrf>

</network-instance>

</network-instances>

Command Syntax

maximum-fib-routes ipv6 threshold <1-100>

clear ip route vrf NAME *

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<clear-ip-vrf-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

</clear-ip-vrf-route-all>

Command Syntax

clear ip route vrf NAME *

clear ip route vrf NAME A.B.C.D/M

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: prefix-address

Attribute Type: string

Netconf RPC payload

<clear-ip-vrf-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

<prefix-address>A.B.C.D/M</prefix-address>

</clear-ip-vrf-route>

Command Syntax

clear ip route vrf NAME A.B.C.D/M

clear ipv4 route vrf NAME *

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<clear-ipv4-vrf-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

</clear-ipv4-vrf-route-all>

Command Syntax

clear ipv4 route vrf NAME *

clear ipv4 route vrf NAME A.B.C.D/M

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: prefix-address

Attribute Type: string

Netconf RPC payload

<clear-ipv4-vrf-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

<prefix-address>A.B.C.D/M</prefix-address>

</clear-ipv4-vrf-route>

Command Syntax

clear ipv4 route vrf NAME A.B.C.D/M

clear ipv6 route vrf NAME *

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<clear-ipv6-vrf-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

</clear-ipv6-vrf-route-all>

Command Syntax

clear ipv6 route vrf NAME *

clear ipv6 route vrf NAME X:X::X:X/M

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: prefix-ipv6-address

Attribute Type: string

Netconf RPC payload

<clear-ipv6-vrf-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rib-vrf">

<vrf-name>NAME</vrf-name>

<prefix-ipv6-address>X:X::X:X/M</prefix-ipv6-address>

</clear-ipv6-vrf-route>

Command Syntax

clear ipv6 route vrf NAME X:X::X:X/M

IPI-OSPF

Configure area interface config mode

Use this attribute to set the OSPF area interface mode operation. Enabling this makes OSPF compatible with OpenConfig datamodel.

Attribute Name: area-interface-config-mode

Attribute Type: empty

Netconf edit-config payload

</area-interface-config-mode>

</config>

</global>

</ospfv2>

Command Syntax

ospf area-interface-config-mode

Configure enable multi instance capability

Use this attribute to enable OSPF multiple instances capability.

Attribute Name: enable-multi-instance-capability

Attribute Type: empty

Netconf edit-config payload

</enable-multi-instance-capability>

</config>

</global>

</ospfv2>

Command Syntax

enable ext-ospf-multi-inst

Configure grace period

Use this attribute to set the grace period for restarting the router OSPF.

This command is supported when following feature are enabled Restart capability

Attribute Name: grace-period

Attribute Type: uint16

Default Value: 120

Attribute Range: 2-1800

Netconf edit-config payload

<graceful-restart>

<grace-period>2</grace-period>

</config>

</graceful-restart>

</global>

</ospfv2>

Command Syntax

ospf restart grace-period <2-1800>

Configure max grace period

Use this attribute to set the maximum grace period. Act as helper only if received grace-period is less than this value.

This command is supported when following feature are enabled Restart capability

Attribute Name: max-grace-period

Attribute Type: uint16

Attribute Range: 2-1800

Netconf edit-config payload

<graceful-restart>

<max-grace-period>2</max-grace-period>

</config>

</helper>

</graceful-restart>

</global>

</ospfv2>

Command Syntax

ospf restart helper max-grace-period <2-1800>

Configure disable all neighbors

Use this attribute to prevent the router OSPF from acting as helper for any neighbor.

This command is supported when following feature are enabled Restart capability

Attribute Name: disable-all-neighbors

Attribute Type: empty

Netconf edit-config payload

<graceful-restart>

</disable-all-neighbors>

</config>

</helper>

</graceful-restart>

</global>

</ospfv2>

Command Syntax

ospf restart helper never

Configure disable neighbor

Use this attribute to set the neighbor router-id for which never act as helper.

This command is supported when following feature are enabled Restart capability

Attribute Name: disable-neighbor

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<graceful-restart>

<disable-neighbor>A.B.C.D</disable-neighbor>

</config>

</helper>

</graceful-restart>

</global>

</ospfv2>

Command Syntax

ospf restart helper never router-id A.B.C.D

Configure ospf id

Use this attribute to set the OSPF process ID.

Attribute Name: ospf-id

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

<vrf-name>WORD</vrf-name>

</config>

</process>

</processes>

</ospfv2>

Command Syntax

router ospf (<0-65535>|) (WORD|)

Configure router id

Use this attribute to set a router ID for the OSPF process. Configure each router OSPF with an unique router ID.

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<router-id>A.B.C.D</router-id>

</process>

</processes>

</ospfv2>

Command Syntax

router-id A.B.C.D

Configure process router-id

Use this attribute to set a router ID for the OSPF process. Configure each router OSPF with an unique router ID.

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<router-id>A.B.C.D</router-id>

</process>

</processes>

</ospfv2>

Command Syntax

ospf router-id A.B.C.D

Configure flood reduction

Use this attribute to enable flood reduction on all OSPF interfaces.

Attribute Name: flood-reduction

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</flood-reduction>

</process>

</processes>

</ospfv2>

Command Syntax

ospf flood-reduction

Configure rfc1583 compatibility

Use this attribute to restore the method used to calculate summary route costs per RFC 1583.

Attribute Name: rfc1583-compatibility

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</rfc1583-compatibility>

</process>

</processes>

</ospfv2>

Command Syntax

compatible rfc1583

Configure database summary

Use this attribute to enable the database summary list optimization.

Attribute Name: database-summary

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</database-summary>

</process>

</processes>

</ospfv2>

Command Syntax

enable db-summary-opt

Configure bfd enable all interfaces

Use this attribute to enable Bidirectional Forwarding Detection (BFD) on all interfaces.

Attribute Name: bfd-enable-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</bfd-enable-all-interfaces>

</process>

</processes>

</ospfv2>

Command Syntax

bfd all-interfaces

Configure log adjacency changes

Use this attribute for the router to send a SYSLOG message when an OSPF neighbor goes up or down.

Attribute Name: log-adjacency-changes

Attribute Type: enum (brief|detail)

Default Value: brief

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<log-adjacency-changes>brief</log-adjacency-changes>

</process>

</processes>

</ospfv2>

Command Syntax

log-adjacency-changes (brief|detail|)

Configure shutdown

Use this attribute to shutdown OSPF process.

Attribute Name: shutdown

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</shutdown>

</process>

</processes>

</ospfv2>

Command Syntax

shutdown

Configure area border type

Use this attribute to set an OSPF Area Border Router (ABR) type.

Attribute Name: area-border-type

Attribute Type: enum (standard|cisco|ibm|shortcut)

Default Value: cisco

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<area-border-type>cisco</area-border-type>

</process>

</processes>

</ospfv2>

Command Syntax

ospf abr-type (standard|cisco|ibm|shortcut|)

Configure reference bandwidth

Use this attribute to control how OSPF calculates the default metric for the interface.

Attribute Name: reference-bandwidth

Attribute Type: uint32

Default Value: 100

Attribute Range: 1-4294967

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<reference-bandwidth>1</reference-bandwidth>

</process>

</processes>

</ospfv2>

Command Syntax

auto-cost reference-bandwidth <1-4294967>

Configure max database descriptors

Use this attribute to limit the number of Database Descriptors (DD) that can be processed concurrently.

Attribute Name: max-database-descriptors

Attribute Type: uint16

Default Value: 64

Attribute Range: 1-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<max-database-descriptors>1</max-database-descriptors>

</process>

</processes>

</ospfv2>

Command Syntax

max-concurrent-dd <1-65535>

Configure p2p rfc incompatible

Use this attribute to enable unicast packet on point-point interface.

Attribute Name: p2p-rfc-incompatible

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</p2p-rfc-incompatible>

</process>

</processes>

</ospfv2>

Command Syntax

ospf point-point rfc-incompatible

Configure context name

Use this attribute to set the SNMP context name for OSPF instance.

Attribute Name: context-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<context-name>WORD</context-name>

</process>

</processes>

</ospfv2>

Command Syntax

snmp context-name WORD

Configure passive interface all

Use this attribute to set all interfaces as passive.

Attribute Name: passive-interface-all

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<passive-interfaces>

</passive-interface-all>

</config>

</passive-interfaces>

</process>

</processes>

</ospfv2>

Command Syntax

passive-interface

Configure passive mode

Use this attribute to define the passive mode.

Attribute Name: passive-mode

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<passive-interfaces>

<passive-interface>

<name>IFNAME</name>

</config>

<passive-mode>enable</passive-mode>

</passive-interface>

</passive-interfaces>

</process>

</processes>

</ospfv2>

Command Syntax

passive-interface IFNAME (disable|enable)

Configure address

Use this attribute to set interface address as passive.

Attribute Name: address

Attribute Type: inet:ipv4-address

Attribute Name: passive-mode

Attribute Type: enum (enable)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<passive-interfaces>

<passive-interface>

<name>IFNAME</name>

</config>

<passive-addresses>

<passive-address>

<passive-mode>enable</passive-mode>

</config>

</passive-address>

</passive-addresses>

</passive-interface>

</passive-interfaces>

</process>

</processes>

</ospfv2>

Command Syntax

passive-interface IFNAME A.B.C.D (enable)

Configure originate

Use this attribute to create a default external route into an OSPF routing domain. The system acts like an Autonomous System Boundary Router (ASBR) when you use the default-information originate command to redistribute routes into an OSPF routing domain. An ASBR does not by default generate a default route into the OSPF routing domain

Attribute Name: originate

Attribute Type: uint8

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<default-information>

</originate>

</config>

</default-information>

</process>

</processes>

</ospfv2>

Command Syntax

default-information originate

Configure route map

Use this attribute to set route-map instance.

Attribute Name: route-map

Attribute Type: string

Attribute Name: originate

Attribute Type: empty

Attribute Name: always-advertise-default-route

Attribute Type: empty

Attribute Name: metric

Attribute Type: uint32

Default Value: 10

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<default-information>

</originate>

</always-advertise-default-route>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

</config>

</default-information>

</process>

</processes>

</ospfv2>

Command Syntax

default-information originate { always| metric <0-16777214>| metric-type (1|2)| route-map WORD }

Configure disable graceful restart

Graceful OSPF Restart.

Attribute Name: disable-graceful-restart

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</disable-graceful-restart>

</config>

</capability>

</process>

</processes>

</ospfv2>

Command Syntax

no capability restart graceful

Configure disable opaque lsa

Use this attribute to enable opaque-LSAs which are Type 9, 10 and 11 LSAs.

Attribute Name: disable-opaque-lsa

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</disable-opaque-lsa>

</config>

</capability>

</process>

</processes>

</ospfv2>

Command Syntax

no capability opaque

Configure enable vrf lite

Use this attribute to enable VRF-lite feature.

Attribute Name: enable-vrf-lite

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</enable-vrf-lite>

</config>

</capability>

</process>

</processes>

</ospfv2>

Command Syntax

capability vrf-lite

Configure link local signaling

Use this attribute to enable link-local signaling feature.

Attribute Name: link-local-signaling

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</link-local-signaling>

</config>

</capability>

</process>

</processes>

</ospfv2>

Command Syntax

capability lls

Configure maximum areas number

Use this attribute to set the maximum number of OSPF areas (excluding Backbone Area).

Attribute Name: maximum-areas-number

Attribute Type: uint32

Attribute Range: 1-4294967294

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<maximum-areas-number>1</maximum-areas-number>

</config>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

maximum-area <1-4294967294>

Configure authentication type

Use this attribute to set the area authentication type.

Attribute Name: authentication-type

Attribute Type: enum (authentication|authentication message-digest)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<authentication-type>authentication</authentication-type>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area (A.B.C.D|<0-4294967295>) (authentication|authentication message-digest)

Configure default cost

Use this attribute to set the summary-default cost of a NSSA or stub area.

Attribute Name: default-cost

Attribute Type: uint32

Attribute Range: 0-16777215

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<default-cost>0</default-cost>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area (A.B.C.D|<0-4294967295>) default-cost <0-16777215>

Configure shortcut

Use this attribute to set the area shortcutting mode.

Attribute Name: shortcut

Attribute Type: enum (default|enable|disable)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<shortcut>default</shortcut>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area (A.B.C.D|<0-4294967295>) shortcut (default|enable|disable)

Configure name

Use this attribute to set the interface to enable OSPF area.

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME

Configure cost

Use this attribute to explicitly specify the cost of the link-state metric in a router-LSA.

Attribute Name: cost

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME cost <1-65535>

Configure network type

Use this attribute to set the area interface network type.

Attribute Name: network-type

Attribute Type: enum (point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint non-broadcast)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<network-type>point-to-point</network-type>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME network-type (point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint non-broadcast)

Configure passive

Use this attribute to set area interface as passive.

Attribute Name: passive

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

</passive>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME passive

Configure priority

Use this attribute to set the router priority to determine the designated router (DR) for the network.

Attribute Name: priority

Attribute Type: uint8

Default Value: 1

Attribute Range: 0-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME priority <0-255>

Configure area id

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<authentication-type>simple</authentication-type>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME authentication (null|message-digest|)

Configure enabled

Use this attribute to enable Bidirectional Forwarding Detection (BFD).

This command is supported when following feature are enabled Bidirectional Forwarding Detection (BFD)

Attribute Name: enabled

Attribute Type: enum (enable|disable)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<enable-bfd>

<enabled>enable</enabled>

</config>

</enable-bfd>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME bfd (disable|)

Configure filter out

Use this attribute to turn on the LSA database-filter for a particular interface. OSPF floods new LSAs over all interfaces in an area, except the interface on which the LSA arrives. This redundancy ensures robust flooding. However, too much redundancy can waste bandwidth and might lead to excessive link and CPU usage in certain topologies, resulting in destabilizing the network. To avoid this, use this attribute to block flooding of LSAs over specified interfaces.

Attribute Name: filter-out

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<lsa-filter>

</filter-out>

</config>

</lsa-filter>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME database-filter all out

Configure dead interval

Use this attribute to set the interval during which the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME dead-interval <1-65535>

Configure hello interval

Use this attribute to specify the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME hello-interval <1-65535>

Configure retransmission interval

Use this attribute to specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<name>IFNAME</name>

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</interface>

</interfaces>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area interface IFNAME retransmit-interval <1-3600>

Configure no summary

Use this attribute to set the OSPF area stub with no-summary, this will prevent an ABR from sending summary link state advertisements into the stub area.

Attribute Name: no-summary

Attribute Type: empty

Attribute Name: is-stub

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<stub>

</is-stub>

</no-summary>

</config>

</stub>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area stub no-summary

Configure is stub

Use this attribute to set the OSPF area as stub.

Attribute Name: is-stub

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<stub>

</is-stub>

</config>

</stub>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area stub

Configure nssa enable

Use this attribute to enable the OSPF area as NSSA.

This command is supported when following feature are enabled Not-So-Stubby Area (NSSA)

Attribute Name: nssa-enable

Attribute Type: enum (nssa)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<nssas>

<nssa-enable>nssa</nssa-enable>

<nssa-enable>nssa</nssa-enable>

</config>

</nssa>

</nssas>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area (nssa)

Configure stability interval

Use this attribute to set route-map instance.

This command is supported when following feature are enabled Not-So-Stubby Area (NSSA)

Attribute Name: route-map

Attribute Type: string

Attribute Name: no-summary

Attribute Type: empty

Attribute Name: stability-interval

Attribute Type: uint32

Default Value: 40

Attribute Range: 0-2147483647

Attribute Name: translator-role

Attribute Type: enum (never|always|candidate)

Attribute Name: no-redistribution

Attribute Type: empty

Attribute Name: default-information-originate

Attribute Type: empty

Attribute Name: metric

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<nssas>

<nssa>

<nssa-enable>nssa</nssa-enable>

<nssa-enable>nssa</nssa-enable>

</no-summary>

<stability-interval>0</stability-interval>

<translator-role>never</translator-role>

</no-redistribution>

</default-information-originate>

<metric-type>2</metric-type>

</config>

<route-map>WORD</route-map>

</nssa>

</nssas>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area (nssa) { no-summary| stability-interval <0-2147483647>| translator-role (never|always|candidate)| no-redistribution| default-information-originate| metric <0-16777214>| metric-type (1|2)| route-map WORD }

Configure filter-in name

Use this attribute to set name of the prefix list.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<filter-list>

<prefix-list>

<filter-in>

</config>

</filter-in>

</prefix-list>

</filter-list>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area filter-list prefix WORD in

Configure filter-out name

Use this attribute to set name of the prefix list.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<filter-list>

<prefix-list>

<filter-out>

</config>

</filter-out>

</prefix-list>

</filter-list>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area filter-list prefix WORD out

Configure filter-in name

Use this attribute to set name of the access control list.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<filter-list>

<access-control-list>

<filter-in>

</config>

</filter-in>

</access-control-list>

</filter-list>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area filter-list access WORD in

Configure filter-out name

Use this attribute to set name of the access control list.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<filter-list>

<access-control-list>

<filter-out>

</config>

</filter-out>

</access-control-list>

</filter-list>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area filter-list access WORD out

Configure ip address

Use this attribute to set the OSPF area ID.

Attribute Name: area-id

Attribute Type: inet:ipv4-address

Attribute Name: ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<hosts>

<host>

<ip-address>A.B.C.D</ip-address>

</host>

</hosts>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

host A.B.C.D area

Configure host cost

Use this attribute to set the stub host cost.

Attribute Name: cost

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<hosts>

<host>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

</host>

</hosts>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

host A.B.C.D area cost <0-65535>

Configure instance id

Use this attribute to set the instance ID. Use this command with OSPF multiple-instance support enabled.

Attribute Name: instance-id

Attribute Type: uint8

Attribute Range: 0-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

</config>

<instance-id>0</instance-id>

</network>

</networks>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

network (A.B.C.D/M|A.B.C.D A.B.C.D) area (instance-id <0-255>|)

Configure area-ranges address

Use this attribute to summarize routes matching address/mask (border routers only).

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<area-ranges>

<area-range>

</config>

</area-range>

</area-ranges>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area range (A.B.C.D/M|A.B.C.D A.B.C.D)

Configure disable advertise

Use this attribute to disable the advertisement of these routes.

Attribute Name: disable-advertise

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<area-ranges>

<area-range>

</config>

</disable-advertise>

</area-range>

</area-ranges>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area range (A.B.C.D/M|A.B.C.D A.B.C.D) not-advertise

Configure remote router id

Use this attribute to set the interface IP address of the neighbor.

Attribute Name: remote-router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D

Configure fall over

Fall-over detection with Bidirectional Forwarding Detection (BFD).

Attribute Name: fall-over

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<bfd>

</fall-over>

</config>

</bfd>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D fall-over bfd

Configure key

Use this attribute to set the authentication password (key).

Attribute Name: key

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

</config>

</authentication>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D authentication-key WORD

Configure authentication authentication-type

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<authentication-type>simple</authentication-type>

</config>

</authentication>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D authentication (null|message-digest|)

Configure message digest id

Use this attribute to set the authentication message digest key ID.

Attribute Name: message-digest-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: message-digest-encryption-type

Attribute Type: enum (md5)

Attribute Name: message-digest-key

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<message-digests>

<message-digest>

<message-digest-id>1</message-digest-id>

<message-digest-id>1</message-digest-id>

<message-digest-encryption-type>md5</message-digest-encryption-type>

<message-digest-key>WORD</message-digest-key>

</config>

</message-digest>

</message-digests>

</authentication>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D message-digest-key <1-255> (md5) WORD

Configure transmit delay

Dead router detection time. Interval during which no packets are received and after which the router acknowledges a neighboring router as off-line.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Attribute Name: transmit-delay

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-3600

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<areas>

<area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<hello-interval>1</hello-interval>

<transmit-delay>1</transmit-delay>

<retransmission-interval>1</retransmission-interval>

<dead-interval>1</dead-interval>

</config>

</timers>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv2>

Command Syntax

area virtual-link A.B.C.D { dead-interval <1-65535>| hello-interval <1-65535>| transmit-delay <1-3600>| retransmit-interval <1-3600> }

Configure limit type

Use this attribute to set the limit type. Soft limit: Warning message appears if the number of LSAs exceeds the specified value; Hard limit: Shutdown occurs if the number of LSAs exceeds the specified value. Default value is 2.

Attribute Name: limit-type

Attribute Type: enum (soft|hard)

Attribute Name: max-limit

Attribute Type: uint32

Attribute Range: 0-4294967294

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lsdb>

<normal-lsa>

<max-limit>0</max-limit>

<limit-type>hard</limit-type>

</config>

</normal-lsa>

</overflow>

</lsdb>

</process>

</processes>

</ospfv2>

Command Syntax

overflow database <0-4294967294> ((soft|hard|)|)

Configure exit interval

Use this attrobute to set the number of seconds the router waits before trying to exit the database overflow state. If this parameter is 0, the router exits the overflow state only after an explicit administrator command. Default value is 0.

This command is supported when following feature are enabled OSPF DataBase (DB) overflow

Attribute Name: exit-interval

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: max-limit

Attribute Type: uint32

Attribute Range: 0-2147483647

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lsdb>

<external-lsa>

<max-limit>0</max-limit>

<exit-interval>0</exit-interval>

</config>

</external-lsa>

</overflow>

</lsdb>

</process>

</processes>

</ospfv2>

Command Syntax

overflow database external <0-2147483647> <0-65535>

Configure keep all paths

Use this attribute to enable fast rerouting on all OSPF interfaces.

This command is supported when following feature are enabled OSPF Loop Free Alternate (LFA)

Attribute Name: keep-all-paths

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lfa>

<fast-reroute>

</keep-all-paths>

</config>

</fast-reroute>

</lfa>

</process>

</processes>

</ospfv2>

Command Syntax

fast-reroute keep-all-paths

Configure fast-reroute route-map

Use this attribute to set route-map for FRR.

This command is supported when following feature are enabled OSPF Loop Free Alternate (LFA)

Attribute Name: route-map

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lfa>

<fast-reroute>

<route-map>WORD</route-map>

</config>

</fast-reroute>

</lfa>

</process>

</processes>

</ospfv2>

Command Syntax

fast-reroute per-prefix route-map WORD

Configure idx

Use this attribute to set the tie breaking index. A lower value has higher preference.

This command is supported when following feature are enabled OSPF Loop Free Alternate (LFA)

Attribute Name: idx

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lfa>

<fast-reroute>

<tie-breaks>

<tie-break>

<type>primary-path</type>

<type>primary-path</type>

</config>

</tie-break>

</tie-breaks>

</fast-reroute>

</lfa>

</process>

</processes>

</ospfv2>

Command Syntax

Configure default distance

Use this attribute to specifies a default administrative distance used when no other specification exists for a routing information source.

Attribute Name: default-distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<administrative-distance>

<default-distance>1</default-distance>

</config>

</administrative-distance>

</process>

</processes>

</ospfv2>

Command Syntax

distance <1-255>

Configure intra area distance

Use this attribute to set the distance for all routes within an area.

Attribute Name: intra-area-distance

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: inter-area-distance

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: external-routes-distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<administrative-distance>

<ospf>

<inter-area-distance>1</inter-area-distance>

<external-routes-distance>1</external-routes-distance>

<intra-area-distance>1</intra-area-distance>

</config>

</ospf>

</administrative-distance>

</process>

</processes>

</ospfv2>

Command Syntax

distance ospf { intra-area <1-255>| inter-area <1-255>| external <1-255> }

Configure access control list

Use this attribute to specifies administrative distance network ACL.

Attribute Name: access-control-list

Attribute Type: string

Attribute Name: distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<administrative-distance>

</config>

<access-control-list>WORD</access-control-list>

</network>

</networks>

</administrative-distance>

</process>

</processes>

</ospfv2>

Command Syntax

distance <1-255> A.B.C.D/M (WORD|)

Configure summary-addresses address

Use this attribute to summarize or suppress external routes with the specified address range.

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<summary-addresses>

<summary-address>

</config>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv2>

Command Syntax

summary-address (A.B.C.D/M|A.B.C.D A.B.C.D)

Configure not advertise

Use this attribute to suppress routes that match the address range.

Attribute Name: not-advertise

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<summary-addresses>

<summary-address>

</config>

</not-advertise>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv2>

Command Syntax

summary-address (A.B.C.D/M|A.B.C.D A.B.C.D) not-advertise

Configure tag

Use this attribute to set the tag value to use as a match value for controlling redistribution via route maps.

Attribute Name: tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<summary-addresses>

<summary-address>

</config>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv2>

Command Syntax

summary-address (A.B.C.D/M|A.B.C.D A.B.C.D) tag <0-4294967295>

Configure filter-in access-control-list

Use this attribute to set the access control list name in distribution list.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-in>

<access-control-list>WORD</access-control-list>

</config>

</filter-in>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD in

Configure access control list isis

Use this attribute to set the access control list name for ISIS protocol.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-isis

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-isis>WORD</access-control-list-isis>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out isis

Configure access control list bgp

Use this attribute to set the access control list name for BGP protocol.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-bgp

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-bgp>WORD</access-control-list-bgp>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out bgp

Configure access control list rip

Use this attribute to set the access control list name for RIP protocol.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-rip

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-rip>WORD</access-control-list-rip>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out rip

Configure access control list static

Use this attribute to set the access control list name for static routes.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-static

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-static>WORD</access-control-list-static>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out static

Configure access control list connected

Use this attribute to set the access control list name for connected networks.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-connected

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-connected>WORD</access-control-list-connected>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out connected

Configure access control list kernel

Use this attribute to set the access control list name for KERNEL routes.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: access-control-list-kernel

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<access-control-list-kernel>WORD</access-control-list-kernel>

</config>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out kernel

Configure ospf process id

Use this attribute to set the OSPF ID in distribution list filter out.

This command is supported when following feature are enabled Access-Control List (ACL)

Attribute Name: ospf-process-id

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: access-control-list-out-ospf

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<distribute-list>

<filter-out>

<ospfv2-processes>

<ospfv2-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

<access-control-list-out-ospf>WORD</access-control-list-out-ospf>

</config>

</ospfv2-process>

</ospfv2-processes>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv2>

Command Syntax

distribute-list WORD out ospf (<0-65535>|)

Configure primary domain id address

Use this attribute to set the domain ID in IPv4 address format.

This command is supported when following feature are enabled OSPF Virtual Routing and Forwarding (VRF)

Attribute Name: primary-domain-id-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<domain-id>

<primary-domain>

<primary-domain-id-address>A.B.C.D</primary-domain-id-address>

</config>

</primary-domain>

</domain-id>

</process>

</processes>

</ospfv2>

Command Syntax

domain-id A.B.C.D

Configure primary domain id hex

Use this attribute to set domain ID in hexadecimal.

This command is supported when following feature are enabled OSPF Virtual Routing and Forwarding (VRF)

Attribute Name: primary-domain-id-hex

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<domain-id>

<primary-domain>

<hexes>

<primary-domain-id-hex>HEX_DATA</primary-domain-id-hex>

<primary-domain-id-hex>OSPF_DOMAIN_ID_HEX_STRING_T</primary-domain-id-hex>

<primary-hex-type>type-as</primary-hex-type>

</config>

<primary-hex-type>type-as</primary-hex-type>

</hex>

</hexes>

</primary-domain>

</domain-id>

</process>

</processes>

</ospfv2>

Command Syntax

domain-id type (type-as|type-as4|type-back-comp|type-ip) value HEX_DATA

Configure secondary domain id address

Use this attribute to set the secondary domain ID in IPv4 address format.

This command is supported when following feature are enabled OSPF Virtual Routing and Forwarding (VRF)

Attribute Name: secondary-domain-id-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<domain-id>

<secondary-domain>

<secondary-domain-id-address>A.B.C.D</secondary-domain-id-address>

<secondary-domain-id-address>A.B.C.D</secondary-domain-id-address>

</config>

</address>

</addresses>

</secondary-domain>

</domain-id>

</process>

</processes>

</ospfv2>

Command Syntax

domain-id A.B.C.D secondary

Configure secondary domain id hex

Use this attribute to set secondary domain ID in hexadecimal.

This command is supported when following feature are enabled OSPF Virtual Routing and Forwarding (VRF)

Attribute Name: secondary-domain-id-hex

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<domain-id>

<secondary-domain>

<hexes>

<secondary-domain-id-hex>HEX_DATA</secondary-domain-id-hex>

<secondary-domain-id-hex>OSPF_DOMAIN_ID_HEX_STRING_T</secondary-domain-id-hex>

<secondary-hex-type>type-as</secondary-hex-type>

</config>

<secondary-hex-type>type-as</secondary-hex-type>

</hex>

</hexes>

</secondary-domain>

</domain-id>

</process>

</processes>

</ospfv2>

Command Syntax

domain-id type (type-as|type-as4|type-back-comp|type-ip) value HEX_DATA secondary

Configure neighbors address

Use this attribute to set the interface IP address of the neighbor.

Attribute Name: address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

</config>

</neighbor>

</neighbors>

</process>

</processes>

</ospfv2>

Command Syntax

neighbor A.B.C.D

Configure poll interval

Use this attribute to set the router cost for point-to-multipoint neighbor.

Attribute Name: cost

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Attribute Name: priority

Attribute Type: uint8

Default Value: 0

Attribute Range: 0-255

Attribute Name: poll-interval

Attribute Type: uint32

Default Value: 120

Attribute Range: 1-2147483647

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<poll-interval>1</poll-interval>

</config>

</neighbor>

</neighbors>

</process>

</processes>

</ospfv2>

Command Syntax

neighbor A.B.C.D { cost <1-65535>| priority <0-255>| poll-interval <1-2147483647> }

Configure termination hold interval

Use this attribute to set the LFA termination hold on interval. It represents the delay of primary route installation (to avoid micro loop) after a failover.

Attribute Name: termination-hold-interval

Attribute Type: uint32

Default Value: 6000

Attribute Range: 100-100000

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lfa>

<termination-hold-interval>100</termination-hold-interval>

</config>

</lfa>

</timers>

</process>

</processes>

</ospfv2>

Command Syntax

fast-reroute terminate-hold-on interval <100-100000>

Configure min arrival interval

Use this attribute to set the minimum interval to accept the same link-state advertisement (LSA) from OSPF neighbors.

Attribute Name: min-arrival-interval

Attribute Type: uint32

Default Value: 1000

Attribute Range: 0-600000

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lsa>

<min-arrival-interval>0</min-arrival-interval>

</config>

</lsa>

</timers>

</process>

</processes>

</ospfv2>

Command Syntax

timers lsa arrival <0-600000>

Configure max delay

Use this attribute to set the maximum wait time in milliseconds between generation of the same LSA.

Attribute Name: max-delay

Attribute Type: uint32

Attribute Range: 1-600000

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<lsa>

<max-delay>1</max-delay>

<max-delay>1</max-delay>

<min-delay>1</min-delay>

<start-delay>0</start-delay>

</config>

<min-delay>1</min-delay>

<start-delay>0</start-delay>

</delay>

</delays>

</lsa>

</timers>

</process>

</processes>

</ospfv2>

Command Syntax

timers throttle lsa all <0-600000> <1-600000> <1-600000>

Configure min delay

Use this attribute to set the maximum delay between receiving a change to SPF calculation.

Attribute Name: max-delay

Attribute Type: uint32

Attribute Range: 0-2147483647

Attribute Name: min-delay

Attribute Type: uint32

Attribute Range: 0-2147483647

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<spf>

<delay>

<min-delay>0</min-delay>

<max-delay>0</max-delay>

</config>

</delay>

</spf>

</timers>

</process>

</processes>

</ospfv2>

Command Syntax

timers spf exp <0-2147483647> <0-2147483647>

Configure default metric

Use this attribute to set a default metric for OSPF. A default metric facilitates redistributing routes with incompatible metrics. If the metrics do not convert, the default metric provides an alternative. Use this attribute to use the same metric value for all redistributed routes. Use this attribute in conjunction with the redistribute command.

Attribute Name: default-metric

Attribute Type: uint32

Default Value: 2

Attribute Range: 1-16777214

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<default-metric>1</default-metric>

</config>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

default-metric <1-16777214>

Configure protocol

This attribute redistributes routes from a routing protocol, static route, or kernel route into an OSPF routing table.

Attribute Name: protocol

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<routing-protocols>

<routing-protocol>

<protocol>connected</protocol>

<protocol>connected</protocol>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

Configure metric

Use this attribute to set metric value.

Attribute Name: metric

Attribute Type: uint32

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Attribute Name: route-map

Attribute Type: string

Attribute Name: tag

Attribute Type: uint32

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<routing-protocols>

<routing-protocol>

<protocol>connected</protocol>

<protocol>connected</protocol>

<metric-type>1</metric-type>

<route-map>WORD</route-map>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

redistribute (connected|static|rip|ospf|bgp|isis) { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure ospf-processes ospf-process-id

This attribute redistributes routes from an instance of OSPF into another OSPF routing table.

Attribute Name: ospf-process-id

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<ospf-processes>

<ospf-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

redistribute ospf <0-65535>

Configure metric type

Use this attribute to set metric value.

Attribute Name: metric

Attribute Type: uint32

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Attribute Name: route-map

Attribute Type: string

Attribute Name: tag

Attribute Type: uint32

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<ospf-processes>

<ospf-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

<metric-type>1</metric-type>

<route-map>WORD</route-map>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

redistribute ospf <0-65535> { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure isis process id

This attribute redistributes routes from an instance of IS-IS into an OSPF routing table.

Attribute Name: isis-process-id

Attribute Type: string

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<isis-processes>

<isis-process>

<isis-process-id>WORD</isis-process-id>

<isis-process-id>WORD</isis-process-id>

</config>

</isis-process>

</isis-processes>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

redistribute isis WORD

Configure isis-process metric

Use this attribute to set metric value.

Attribute Name: metric

Attribute Type: uint32

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Attribute Name: route-map

Attribute Type: string

Attribute Name: tag

Attribute Type: uint32

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<isis-processes>

<isis-process>

<isis-process-id>WORD</isis-process-id>

<isis-process-id>WORD</isis-process-id>

<metric-type>1</metric-type>

<route-map>WORD</route-map>

</config>

</isis-process>

</isis-processes>

</redistribute>

</process>

</processes>

</ospfv2>

Command Syntax

redistribute isis WORD { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure include stub

Use this attribute to set the metric of a stub link in the router LSA to the default max metric.

This command is supported when following feature are enabled Generate lsa with max-metric

Attribute Name: include-stub

Attribute Type: empty

Attribute Name: enable-max-router-lsa

Attribute Type: empty

Attribute Name: max-external-lsa

Attribute Type: uint32

Attribute Range: 1-16777215

Attribute Name: max-summary-lsa

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<max-metric>

</enable-max-router-lsa>

<max-external-lsa>1</max-external-lsa>

<max-summary-lsa>1</max-summary-lsa>

</include-stub>

</config>

</max-metric>

</process>

</processes>

</ospfv2>

Command Syntax

max-metric router-lsa { external-lsa (<1-16777215>|)| summary-lsa (<1-16777215>|)| include-stub }

Configure enable max router lsa

Use this attribute to set the metric in the router LSA to the default max metric.

This command is supported when following feature are enabled Generate lsa with max-metric

Attribute Name: enable-max-router-lsa

Attribute Type: empty

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<max-metric>

</enable-max-router-lsa>

</config>

</max-metric>

</process>

</processes>

</ospfv2>

Command Syntax

max-metric router-lsa

Configure on startup include stub

Use this attribute to set the metric of a stub link in the router LSA to the default max metric.

This command is supported when following feature are enabled Generate lsa with max-metric

Attribute Name: on-startup-include-stub

Attribute Type: empty

Attribute Name: max-on-startup

Attribute Type: uint32

Attribute Range: 5-86400

Attribute Name: max-on-startup-external-lsa

Attribute Type: uint32

Attribute Range: 1-16777215

Attribute Name: max-on-startup-summary-lsa

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<max-metric-on-startup>

<max-on-startup>5</max-on-startup>

<max-on-startup-external-lsa>1</max-on-startup-external-lsa>

<max-on-startup-summary-lsa>1</max-on-startup-summary-lsa>

</on-startup-include-stub>

</config>

</max-metric-on-startup>

</process>

</processes>

</ospfv2>

Command Syntax

max-metric router-lsa on-startup <5-86400> { external-lsa (<1-16777215>|)| summary-lsa (<1-16777215>|)| include-stub }

Configure max on startup

Use this attribute to set the metric for router LSA on-startup for the transit link to the default max metric.

This command is supported when following feature are enabled Generate lsa with max-metric

Attribute Name: max-on-startup

Attribute Type: uint32

Attribute Range: 5-86400

Netconf edit-config payload

<ospf-id>0</ospf-id>

<ospf-id>0</ospf-id>

</config>

<max-metric-on-startup>

<max-on-startup>5</max-on-startup>

</config>

</max-metric-on-startup>

</process>

</processes>

</ospfv2>

Command Syntax

max-metric router-lsa on-startup <5-86400>

Configure ospfv2-processes ospf-process-id

Use this attribute to set the OSPF process ID in which to enable multi-area adjacency.

This command is supported when following feature are enabled HAVE_OSPF_MULTI_AREA

Attribute Name: ospf-process-id

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<multi-area-interfaces>

<multi-area-interface>

</config>

<ospfv2-processes>

<ospfv2-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

</config>

</ospfv2-process>

</ospfv2-processes>

</multi-area-interface>

</multi-area-interfaces>

</ospfv2>

Command Syntax

ip ospf <0-65535>

Configure ospfv2-processes ospf-process-id

Use this attribute to set the OSPF process ID in which to enable multi-area adjacency.

This command is supported when following feature are enabled HAVE_OSPF_MULTI_AREA

Attribute Name: ospf-process-id

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<multi-area-interfaces>

<multi-area-interface>

</config>

<ospfv2-processes>

<ospfv2-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

</config>

</ospfv2-process>

</ospfv2-processes>

</multi-area-interface>

</multi-area-interfaces>

</ospfv2>

Command Syntax

ip ospf <0-65535>

Configure multi-areas area-id

Use this attribute to set the OSPF area ID in which to enable multi-area adjacency.

This command is supported when following feature are enabled HAVE_OSPF_MULTI_AREA

Attribute Name: area-id

Attribute Type: union

Netconf edit-config payload

<multi-area-interfaces>

<multi-area-interface>

</config>

<ospfv2-processes>

<ospfv2-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

</config>

<multi-areas>

<multi-area>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

</multi-area>

</multi-areas>

</ospfv2-process>

</ospfv2-processes>

</multi-area-interface>

</multi-area-interfaces>

</ospfv2>

Command Syntax

ip ospf <0-65535> multi-area (A.B.C.D|<0-4294967295>)

Configure neighbor

Use this attribute to set the OSPF area ID in which to enable multi-area adjacency.

This command is supported when following feature are enabled HAVE_OSPF_MULTI_AREA

Attribute Name: area-id

Attribute Type: union

Attribute Name: neighbor

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<multi-area-interfaces>

<multi-area-interface>

</config>

<ospfv2-processes>

<ospfv2-process>

<ospf-process-id>0</ospf-process-id>

<ospf-process-id>0</ospf-process-id>

</config>

<multi-areas-neighbors>

<multi-area-neighbor>

<area-id>OSPF_AREA_T</area-id>

<area-id>OSPF_AREA_T</area-id>

</config>

</multi-area-neighbor>

</multi-areas-neighbors>

</ospfv2-process>

</ospfv2-processes>

</multi-area-interface>

</multi-area-interfaces>

</ospfv2>

Command Syntax

ip ospf <0-65535> multi-area (A.B.C.D|<0-4294967295>) neighbor A.B.C.D

Configure rate limit

Use this attribute to enable OSPF Database Timers Rate Limiting Values for LSA Throttling debug.

Attribute Name: rate-limit

Attribute Type: uint8

Attribute Name: bfd

Attribute Type: empty

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install|spf-terse)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Attribute Name: events

Attribute Name: retransmission

Attribute Type: empty

Attribute Name: policy

Attribute Type: empty

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

</bfd>

<rib>interface</rib>

<nsm>interface</nsm>

<nfsm>status</nfsm>

<lsa>generate</lsa>

<ifsm>status</ifsm>

</retransmission>

</policy>

<redistribute>detail</redistribute>

<graceful-restart>detail</graceful-restart>

<packet-hello>send</packet-hello>

<packet-dd>send</packet-dd>

<packet-ls-request>send</packet-ls-request>

<packet-ls-update>send</packet-ls-update>

<packet-ls-ack>send</packet-ls-ack>

</rate-limit>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf

Configure bfd

Use this attribute to enable OSPF Database Timers Rate Limiting Values for LSA Throttling debug.

Attribute Name: rate-limit

Attribute Type: uint8

Attribute Name: bfd

Attribute Type: empty

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install|spf-terse)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Attribute Name: events

Attribute Name: retransmission

Attribute Type: empty

Attribute Name: policy

Attribute Type: empty

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

</bfd>

<rib>interface</rib>

<nsm>interface</nsm>

<nfsm>status</nfsm>

<lsa>generate</lsa>

<ifsm>status</ifsm>

</retransmission>

</policy>

<redistribute>detail</redistribute>

<graceful-restart>detail</graceful-restart>

<packet-hello>send</packet-hello>

<packet-dd>send</packet-dd>

<packet-ls-request>send</packet-ls-request>

<packet-ls-update>send</packet-ls-update>

<packet-ls-ack>send</packet-ls-ack>

</rate-limit>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf all

Configure retransmission

Use this attribute to enable OSPF Debug retransmission information debug.

Attribute Name: retransmission

Attribute Type: uint8

Attribute Name: policy

Attribute Type: empty

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Netconf edit-config payload

<debug>

</policy>

<redistribute>detail</redistribute>

<graceful-restart>detail</graceful-restart>

</retransmission>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf all

Configure debug bfd

Use this attribute to enable Bidirectional Forwarding Detection (BFD) debug.

Attribute Name: bfd

Attribute Type: empty

Netconf edit-config payload

<debug>

</bfd>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf bfd

Configure debug rate-limit

Use this attribute to enable OSPF Database Timers Rate Limiting Values for LSA Throttling debug.

Attribute Name: rate-limit

Attribute Type: empty

Netconf edit-config payload

<debug>

</rate-limit>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf database-timer rate-limit

Configure route

Use this attribute to enable OSPF route information debug.

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install|spf-terse)

Netconf edit-config payload

<debug>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf route ({spf|ia|ase|install|spf-terse}|)

Configure rib

Use this attribute to enable OSPF RIB information debug.

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf edit-config payload

<debug>

<rib>interface</rib>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf rib ({interface|redistribute}|)

Configure nsm

Use this attribute to enable OSPF NSM information debug.

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf edit-config payload

<debug>

<nsm>interface</nsm>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf nsm ({interface|redistribute}|)

Configure nfsm

Use this attribute to enable OSPF Neighbor State Machine debug.

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf edit-config payload

<debug>

<nfsm>status</nfsm>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf nfsm ({status|events|timers}|)

Configure lsa

Use this attribute to enable OSPF Link State Advertisement debug.

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf edit-config payload

<debug>

<lsa>generate</lsa>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf lsa ({generate|flooding|install|refresh|maxage}|)

Configure ifsm

Use this attribute to enable OSPF Interface State Machine debug.

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf edit-config payload

<debug>

<ifsm>status</ifsm>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf ifsm ({status|events|timers}|)

Configure events

Use this attribute to enable OSPF events information debug.

Attribute Name: events

Netconf edit-config payload

<debug>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf events ({abr|nssa|asbr|vlink|lsa|os|router}|)

Configure debug retransmission

Use this attribute to enable OSPF Debug retransmission information debug.

Attribute Name: retransmission

Attribute Type: empty

Netconf edit-config payload

<debug>

</retransmission>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf retransmission

Configure lfa

Use this attribute to enable OSPF LFA route install details debug.

Attribute Name: lfa

Attribute Type: empty

Netconf edit-config payload

<debug>

</lfa>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf lfa

Configure policy

Use this attribute to enable OSPF policy information debug.

Attribute Name: policy

Attribute Type: empty

Netconf edit-config payload

<debug>

</policy>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf policy

Configure redistribute

Use this attribute to enable OSPF redistribute information debug.

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Netconf edit-config payload

<debug>

<redistribute>detail</redistribute>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf redistribute ({detail|terse}|)

Configure graceful restart

Use this attribute to enable OSPF graceful-restart debug.

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Netconf edit-config payload

<debug>

<graceful-restart>detail</graceful-restart>

</config>

</debug>

</ospfv2>

Command Syntax

debug ip ospf graceful-restart ({detail|terse}|)

Configure packet hello

OSPF Hello

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-hello>send</packet-hello>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf packet hello ({send|recv|detail}|)

Configure packet dd

OSPF Database Description

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-dd>send</packet-dd>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf packet dd ({send|recv|detail}|)

Configure packet ls request

OSPF Link State Request

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-request>send</packet-ls-request>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf packet ls-request ({send|recv|detail}|)

Configure packet ls update

OSPF Link State Update

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-update>send</packet-ls-update>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf packet ls-update ({send|recv|detail}|)

Configure packet ls ack

OSPF Link State Acknowledgment

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-ack>send</packet-ls-ack>

</config>

</debug>

</ospfv2>

Command Syntax

debug ospf packet ls-ack ({send|recv|detail}|)

clear ip ospf <0-65535> process

Attribute Name: process-id

Attribute Type: uint16

Attribute Range: 0-65535

Netconf RPC payload

<ospfv2-clear-process xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<process-id>0</process-id>

</ospfv2-clear-process>

Command Syntax

clear ip ospf <0-65535> process

clear ip ospf process

Netconf RPC payload

<ospfv2-clear-process-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

clear ip ospf process

restart ip ospf graceful (grace-period <2-1800>|)

Attribute Name: grace-period

Attribute Type: uint16

Attribute Range: 2-1800

Netconf RPC payload

<ospfv2-restart-graceful xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<grace-period>2</grace-period>

</ospfv2-restart-graceful>

Command Syntax

restart ip ospf graceful (grace-period <2-1800>|)

snmp restart ospf

Netconf RPC payload

<ospfv2-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

snmp restart ospf

debug ospf all

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-ospf-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ospf all

no debug ospf all

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-ospf-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ospf all

debug ospf bfd

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-bfd-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ospf bfd

no debug ospf bfd

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-bfd-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ospf bfd

debug ospf database-timer rate-limit

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-rate-limit-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ospf database-timer rate-limit

no debug ospf database-timer rate-limit

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-rate-limit-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ospf database-timer rate-limit

debug ospf route ({spf|ia|ase|install|spf-terse}|)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install|spf-terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-route-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-route-on>

Command Syntax

debug ospf route ({spf|ia|ase|install|spf-terse}|)

no debug ospf route ({spf|ia|ase|install|spf-terse}|)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install|spf-terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-route-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-route-off>

Command Syntax

no debug ospf route ({spf|ia|ase|install|spf-terse}|)

debug ospf rib ({interface|redistribute}|)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-rib-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<rib>interface</rib>

</ipi-ospf-debug_ospfv2-terminal-debug-rib-on>

Command Syntax

debug ospf rib ({interface|redistribute}|)

no debug ospf rib ({interface|redistribute}|)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-rib-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<rib>interface</rib>

</ipi-ospf-debug_ospfv2-terminal-debug-rib-off>

Command Syntax

no debug ospf rib ({interface|redistribute}|)

debug ospf packet ({send|recv|detail}|)

Attribute Name: all

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-all-on>

Command Syntax

debug ospf packet ({send|recv|detail}|)

no debug ospf packet ({send|recv|detail}|)

Attribute Name: all

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-all-off>

Command Syntax

no debug ospf packet ({send|recv|detail}|)

debug ospf packet hello ({send|recv|detail}|)

Attribute Name: hello

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-hello-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-hello-on>

Command Syntax

debug ospf packet hello ({send|recv|detail}|)

no debug ospf packet hello ({send|recv|detail}|)

Attribute Name: hello

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-hello-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-hello-off>

Command Syntax

no debug ospf packet hello ({send|recv|detail}|)

debug ospf packet dd ({send|recv|detail}|)

Attribute Name: dd

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-dd-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-dd-on>

Command Syntax

debug ospf packet dd ({send|recv|detail}|)

no debug ospf packet dd ({send|recv|detail}|)

Attribute Name: dd

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-dd-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-packet-dd-off>

Command Syntax

no debug ospf packet dd ({send|recv|detail}|)

debug ospf packet ls-request ({send|recv|detail}|)

Attribute Name: ls-request

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-request-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-request>send</ls-request>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-request-on>

Command Syntax

debug ospf packet ls-request ({send|recv|detail}|)

no debug ospf packet ls-request ({send|recv|detail}|)

Attribute Name: ls-request

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-request-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-request>send</ls-request>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-request-off>

Command Syntax

no debug ospf packet ls-request ({send|recv|detail}|)

debug ospf packet ls-update ({send|recv|detail}|)

Attribute Name: ls-update

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-update-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-update>send</ls-update>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-update-on>

Command Syntax

debug ospf packet ls-update ({send|recv|detail}|)

no debug ospf packet ls-update ({send|recv|detail}|)

Attribute Name: ls-update

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-update-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-update>send</ls-update>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-update-off>

Command Syntax

no debug ospf packet ls-update ({send|recv|detail}|)

debug ospf packet ls-ack ({send|recv|detail}|)

Attribute Name: ls-ack

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-ack-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-ack>send</ls-ack>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-ack-on>

Command Syntax

debug ospf packet ls-ack ({send|recv|detail}|)

no debug ospf packet ls-ack ({send|recv|detail}|)

Attribute Name: ls-ack

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-ack-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ls-ack>send</ls-ack>

</ipi-ospf-debug_ospfv2-terminal-debug-packet-ls-ack-off>

Command Syntax

no debug ospf packet ls-ack ({send|recv|detail}|)

debug ospf nsm ({interface|redistribute}|)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-nsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<nsm>interface</nsm>

</ipi-ospf-debug_ospfv2-terminal-debug-nsm-on>

Command Syntax

debug ospf nsm ({interface|redistribute}|)

no debug ospf nsm ({interface|redistribute}|)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-nsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<nsm>interface</nsm>

</ipi-ospf-debug_ospfv2-terminal-debug-nsm-off>

Command Syntax

no debug ospf nsm ({interface|redistribute}|)

debug ospf nfsm ({status|events|timers}|)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-nfsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<nfsm>status</nfsm>

</ipi-ospf-debug_ospfv2-terminal-debug-nfsm-on>

Command Syntax

debug ospf nfsm ({status|events|timers}|)

no debug ospf nfsm ({status|events|timers}|)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-nfsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<nfsm>status</nfsm>

</ipi-ospf-debug_ospfv2-terminal-debug-nfsm-off>

Command Syntax

no debug ospf nfsm ({status|events|timers}|)

debug ospf lsa ({generate|flooding|install|refresh|maxage}|)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-lsa-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<lsa>generate</lsa>

</ipi-ospf-debug_ospfv2-terminal-debug-lsa-on>

Command Syntax

debug ospf lsa ({generate|flooding|install|refresh|maxage}|)

no debug ospf lsa ({generate|flooding|install|refresh|maxage}|)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-lsa-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<lsa>generate</lsa>

</ipi-ospf-debug_ospfv2-terminal-debug-lsa-off>

Command Syntax

no debug ospf lsa ({generate|flooding|install|refresh|maxage}|)

debug ospf ifsm ({status|events|timers}|)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-ifsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ifsm>status</ifsm>

</ipi-ospf-debug_ospfv2-terminal-debug-ifsm-on>

Command Syntax

debug ospf ifsm ({status|events|timers}|)

no debug ospf ifsm ({status|events|timers}|)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-ifsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<ifsm>status</ifsm>

</ipi-ospf-debug_ospfv2-terminal-debug-ifsm-off>

Command Syntax

no debug ospf ifsm ({status|events|timers}|)

debug ospf events ({abr|nssa|asbr|vlink|lsa|os|router}|)

Attribute Name: events

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-events-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-events-on>

Command Syntax

debug ospf events ({abr|nssa|asbr|vlink|lsa|os|router}|)

no debug ospf events ({abr|nssa|asbr|vlink|lsa|os|router}|)

Attribute Name: events

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-events-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

</ipi-ospf-debug_ospfv2-terminal-debug-events-off>

Command Syntax

no debug ospf events ({abr|nssa|asbr|vlink|lsa|os|router}|)

debug ip ospf all

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ip ospf all

no debug ip ospf all

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ip ospf all

debug ip ospf retransmission

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-retransmission-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ip ospf retransmission

no debug ip ospf retransmission

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-retransmission-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ip ospf retransmission

debug ip ospf lfa

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-lfa-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ip ospf lfa

no debug ip ospf lfa

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-lfa-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ip ospf lfa

debug ip ospf policy

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-policy-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

debug ip ospf policy

no debug ip ospf policy

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-policy-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf"/>

Command Syntax

no debug ip ospf policy

debug ip ospf redistribute ({detail|terse}|)

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-redistribute-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<redistribute>detail</redistribute>

</ipi-ospf-debug_ospfv2-terminal-debug-redistribute-on>

Command Syntax

debug ip ospf redistribute ({detail|terse}|)

no debug ip ospf redistribute ({detail|terse}|)

Attribute Name: redistribute

Attribute Type: bits (detail|terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-redistribute-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<redistribute>detail</redistribute>

</ipi-ospf-debug_ospfv2-terminal-debug-redistribute-off>

Command Syntax

no debug ip ospf redistribute ({detail|terse}|)

debug ip ospf graceful-restart ({detail|terse}|)

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-graceful-restart-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<graceful-restart>detail</graceful-restart>

</ipi-ospf-debug_ospfv2-terminal-debug-graceful-restart-on>

Command Syntax

debug ip ospf graceful-restart ({detail|terse}|)

no debug ip ospf graceful-restart ({detail|terse}|)

Attribute Name: graceful-restart

Attribute Type: bits (detail|terse)

Netconf RPC payload

<ipi-ospf-debug_ospfv2-terminal-debug-graceful-restart-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospf">

<graceful-restart>detail</graceful-restart>

</ipi-ospf-debug_ospfv2-terminal-debug-graceful-restart-off>

Command Syntax

no debug ip ospf graceful-restart ({detail|terse}|)

IPI-OSPF-INTERFACE

Configure cost

Use this attribute to explicitly specify the cost of the link-state metric in a router-LSA.

Attribute Name: cost

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

</config>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf cost <1-65535>

Configure priority

Use this attribute to set the router priority to determine the designated router (DR) for the network.

Attribute Name: priority

Attribute Type: uint8

Default Value: 1

Attribute Range: 0-255

Netconf edit-config payload

</config>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf priority <0-255>

Configure mtu ignore

Use this attribute to configure OSPF so that it does not check the MTU size during DD (Database Description) exchange.

Attribute Name: mtu-ignore

Attribute Type: empty

Netconf edit-config payload

</config>

</mtu-ignore>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf mtu-ignore

Configure network type

Use this attribute to set the interface network type.

Attribute Name: network-type

Attribute Type: enum (point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint non-broadcast)

Netconf edit-config payload

</config>

<network-type>point-to-point</network-type>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf network (point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint non-broadcast)

Configure disable all ospf

Use this attribute to completely disable OSPF packet processing on an interface.

Attribute Name: disable-all-ospf

Attribute Type: empty

Netconf edit-config payload

</config>

</disable-all-ospf>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf disable all

Configure mtu

Use this attribute to set MTU size for OSPF to construct packets based on this value.

Attribute Name: mtu

Attribute Type: uint16

Default Value: 576

Attribute Range: 576-65535

Netconf edit-config payload

</config>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf mtu <576-65535>

Configure enable flood reduction

Use this attribute to enable flood reduction on an interface.

Attribute Name: enable-flood-reduction

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-flood-reduction>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf flood-reduction

Configure enable demand circuit

Use this attribute to enable Hello Suppression and LSA Suppression sent on OSPF interface.

Attribute Name: enable-demand-circuit

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-demand-circuit>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf demand-circuit

Configure enable bfd

Use this attribute to enable Bidirectional Forwarding Detection (BFD).

Attribute Name: enable-bfd

Attribute Type: enum (enable|disable)

Netconf edit-config payload

</config>

<enable-bfd>enable</enable-bfd>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf bfd (disable|)

Configure disable fast reroute

Use this attribute to prohibit the interface from being used as the next hop in a repair path.

Attribute Name: disable-fast-reroute

Attribute Type: empty

Netconf edit-config payload

</config>

</disable-fast-reroute>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf fast-reroute per-prefix candidate disable

Configure authentication type

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

</config>

<authentication-type>simple</authentication-type>

</config>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf authentication (null|message-digest|)

Configure key

Use this attribute to set the authentication password (key).

Attribute Name: key

Attribute Type: string

Netconf edit-config payload

</config>

</config>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf authentication-key WORD

Configure name

Use this attribute to set the authentication password (key).

Attribute Name: key

Attribute Type: string

Netconf edit-config payload

</config>

</config>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf authentication-key WORD

Configure authentication authentication-type

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

</config>

<authentication-type>simple</authentication-type>

</config>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf authentication (null|message-digest|)

Configure message digest id

Use this attribute to set the authentication message digest key ID.

Attribute Name: message-digest-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: message-digest-encryption-type

Attribute Type: enum (md5)

Attribute Name: message-digest-key

Attribute Type: string

Netconf edit-config payload

</config>

<message-digests>

<message-digest>

<message-digest-id>1</message-digest-id>

<message-digest-id>1</message-digest-id>

<message-digest-encryption-type>md5</message-digest-encryption-type>

<message-digest-key>WORD</message-digest-key>

</config>

</message-digest>

</message-digests>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf message-digest-key <1-255> (md5) WORD

Configure message digest encryption type

Use this attribute to set the authentication message digest key ID.

Attribute Name: message-digest-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: message-digest-encryption-type

Attribute Type: enum (md5)

Attribute Name: message-digest-key

Attribute Type: string

Netconf edit-config payload

</config>

<message-digests>

<message-digest>

<message-digest-id>1</message-digest-id>

<message-digest-id>1</message-digest-id>

<message-digest-encryption-type>md5</message-digest-encryption-type>

<message-digest-key>WORD</message-digest-key>

</config>

</message-digest>

</message-digests>

</authentication>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf message-digest-key <1-255> (md5) WORD

Configure filter out

Attribute Name: filter-out

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<database-filter>

<lsa>

</filter-out>

</config>

</lsa>

</database-filter>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf database-filter all out

Configure lsa filter-out

Attribute Name: filter-out

Attribute Type: empty

Netconf edit-config payload

</config>

<database-filter>

<lsa>

</filter-out>

</config>

</lsa>

</database-filter>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf database-filter all out

Configure dead interval

Use this attribute to set the interval during which the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf dead-interval <1-65535>

Configure hello interval

Use this attribute to specify the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf hello-interval <1-65535>

Configure retransmission interval

Use this attribute to specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf retransmit-interval <1-3600>

Configure timers dead-interval

Use this attribute to set the interval during which the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf dead-interval <1-65535>

Configure timers hello-interval

Use this attribute to specify the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf hello-interval <1-65535>

Configure timers retransmission-interval

Use this attribute to specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf retransmit-interval <1-3600>

Configure transmit delay

Use this attribute to set the estimated time it takes to transmit a link-state-update packet on the interface.

Attribute Name: transmit-delay

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<transmit-delay>1</transmit-delay>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf transmit-delay <1-3600>

Configure resync timeout

Use this attribute to configure the interval after which adjacency is reset if oob-resync is not started.

Attribute Name: resync-timeout

Attribute Type: uint16

Default Value: 40

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<resync-timeout>1</resync-timeout>

</config>

</timers>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf resync-timeout <1-65535>

Configure interface address

Use this attribute to explicitly specify the cost of the link-state metric in a router-LSA.

Attribute Name: cost

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D cost <1-65535>

Configure address priority

Use this attribute to set the router priority to determine the designated router (DR) for the network.

Attribute Name: priority

Attribute Type: uint8

Default Value: 1

Attribute Range: 0-255

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D priority <0-255>

Configure address mtu-ignore

Use this attribute to configure OSPF so that it does not check the MTU size during DD (Database Description) exchange.

Attribute Name: mtu-ignore

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

</mtu-ignore>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D mtu-ignore

Configure authentication authentication-type

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<authentication-type>simple</authentication-type>

</config>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D authentication (null|message-digest|)

Configure authentication key

Use this attribute to set the authentication password (key).

Attribute Name: key

Attribute Type: string

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

</config>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D authentication-key WORD

Configure authentication key

Use this attribute to set the authentication password (key).

Attribute Name: key

Attribute Type: string

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

</config>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D authentication-key WORD

Configure authentication authentication-type

Use this attribute to configure authentication on this interface.

Attribute Name: authentication-type

Attribute Type: enum (null|simple|message-digest)

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<authentication-type>simple</authentication-type>

</config>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D authentication (null|message-digest|)

Configure message digest key

Use this attribute to set the authentication message digest key ID.

Attribute Name: message-digest-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: message-digest-encryption-type

Attribute Type: enum (md5)

Attribute Name: message-digest-key

Attribute Type: string

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<message-digests>

<message-digest>

<message-digest-id>1</message-digest-id>

<message-digest-id>1</message-digest-id>

<message-digest-encryption-type>md5</message-digest-encryption-type>

<message-digest-key>WORD</message-digest-key>

</config>

</message-digest>

</message-digests>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D message-digest-key <1-255> (md5) WORD

Configure message-digests message-digest-id

Use this attribute to set the authentication message digest key ID.

Attribute Name: message-digest-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: message-digest-encryption-type

Attribute Type: enum (md5)

Attribute Name: message-digest-key

Attribute Type: string

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<message-digests>

<message-digest>

<message-digest-id>1</message-digest-id>

<message-digest-id>1</message-digest-id>

<message-digest-encryption-type>md5</message-digest-encryption-type>

<message-digest-key>WORD</message-digest-key>

</config>

</message-digest>

</message-digests>

</authentication>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D message-digest-key <1-255> (md5) WORD

Configure timers dead-interval

Use this attribute to set the interval during which the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D dead-interval <1-65535>

Configure timers hello-interval

Use this attribute to specify the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D hello-interval <1-65535>

Configure timers retransmission-interval

Use this attribute to specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D retransmit-interval <1-3600>

Configure timers dead-interval

Use this attribute to set the interval during which the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D dead-interval <1-65535>

Configure timers hello-interval

Use this attribute to specify the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D hello-interval <1-65535>

Configure timers retransmission-interval

Use this attribute to specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the interface.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D retransmit-interval <1-3600>

Configure timers transmit-delay

Use this attribute to set the estimated time it takes to transmit a link-state-update packet on the interface.

Attribute Name: transmit-delay

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-3600

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<transmit-delay>1</transmit-delay>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D transmit-delay <1-3600>

Configure timers resync-timeout

Use this attribute to configure the interval after which adjacency is reset if oob-resync is not started.

Attribute Name: resync-timeout

Attribute Type: uint16

Default Value: 40

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<resync-timeout>1</resync-timeout>

</config>

</timers>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D resync-timeout <1-65535>

Configure lsa filter-out

Attribute Name: filter-out

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<database-filter>

<lsa>

</filter-out>

</config>

</lsa>

</database-filter>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D database-filter all out

Configure lsa filter-out

Attribute Name: filter-out

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-address>A.B.C.D</interface-address>

<interface-address>A.B.C.D</interface-address>

</config>

<database-filter>

<lsa>

</filter-out>

</config>

</lsa>

</database-filter>

</address>

</addresses>

</interface>

</interfaces>

</ospfv2>

Command Syntax

ip ospf A.B.C.D database-filter all out

IPI-OSPFV3

Configure display route on single line

Use this attribute to display the output of the show ipv6 ospf route command with each route entry in a singleline.

Attribute Name: display-route-on-single-line

Attribute Type: empty

Netconf edit-config payload

</display-route-on-single-line>

</config>

</global>

</ospfv3>

Command Syntax

ipv6 ospf display route single-line

Configure grace period

Use this attribute to enable the graceful restart feature and set the grace period for restarting the router

This command is supported when following feature are enabled Restart capability

Attribute Name: grace-period

Attribute Type: uint16

Default Value: 120

Attribute Range: 2-1800

Netconf edit-config payload

<graceful-restart>

<grace-period>2</grace-period>

</config>

</graceful-restart>

</global>

</ospfv3>

Command Syntax

ipv6 ospf restart grace-period <2-1800>

Configure controlled restarts only

Use this attribute to enable the graceful restart controlled restarts only for the router

This command is supported when following feature are enabled Restart capability

Attribute Name: controlled-restarts-only

Attribute Type: empty

Netconf edit-config payload

<graceful-restart>

</controlled-restarts-only>

</config>

</graceful-restart>

</global>

</ospfv3>

Command Syntax

ipv6 ospf restart planned-only

Configure max grace period

Use this attribute to set the maximum grace period to act as helper. i.e Help only if received grace-period is less than set value.

This command is supported when following feature are enabled Restart capability

Attribute Name: max-grace-period

Attribute Type: uint16

Attribute Range: 2-1800

Netconf edit-config payload

<graceful-restart>

<max-grace-period>2</max-grace-period>

</config>

</helper>

</graceful-restart>

</global>

</ospfv3>

Command Syntax

ipv6 ospf restart helper max-grace-period <2-1800>

Configure disable all neighbors

Use this attribute to set disable acting as helper for all neighbors.

This command is supported when following feature are enabled Restart capability

Attribute Name: disable-all-neighbors

Attribute Type: empty

Netconf edit-config payload

<graceful-restart>

</disable-all-neighbors>

</config>

</helper>

</graceful-restart>

</global>

</ospfv3>

Command Syntax

ipv6 ospf restart helper never

Configure disable neighbor

Use this attribute to set disable acting as helper for specified neighbor.

This command is supported when following feature are enabled Restart capability

Attribute Name: disable-neighbor

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<graceful-restart>

<disable-neighbor>A.B.C.D</disable-neighbor>

</config>

</helper>

</graceful-restart>

</global>

</ospfv3>

Command Syntax

ipv6 ospf restart helper never router-id A.B.C.D

Configure ospfv3 id

Use this attribute to set the OSPFv3 process ID

Attribute Name: ospfv3-id

Attribute Type: string

Attribute Range: 0-254

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

<vrf-name>WORD</vrf-name>

</config>

</process>

</processes>

</ospfv3>

Command Syntax

router ipv6 ospf (WORD|) (WORD|)

Configure vrf name

VRF Name to associate with this instance

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<vrf-name>WORD</vrf-name>

</process>

</processes>

</ospfv3>

Command Syntax

router ipv6 vrf ospf WORD

Configure router id

Use this attribute to set a router ID for the OSPFv3 process. Configure each router OSPFv3 with an unique router ID

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<router-id>A.B.C.D</router-id>

</process>

</processes>

</ospfv3>

Command Syntax

router-id A.B.C.D

Configure bfd enable all interfaces

Use this attribute to enable Bidirectional Forwarding Detection (BFD) on all interfaces.

Attribute Name: bfd-enable-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

</bfd-enable-all-interfaces>

</process>

</processes>

</ospfv3>

Command Syntax

bfd all-interfaces

Configure database summary

Use this attribute to enable the database summary list optimization for OSPFv3.

Attribute Name: database-summary

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

</database-summary>

</process>

</processes>

</ospfv3>

Command Syntax

enable db-summary-opt

Configure area border type

Use this attribute to set an OSPFv3 Area Border Router (ABR) type.

Attribute Name: area-border-type

Attribute Type: enum (standard|cisco|ibm)

Default Value: cisco

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<area-border-type>cisco</area-border-type>

</process>

</processes>

</ospfv3>

Command Syntax

abr-type (standard|cisco|ibm)

Configure default metric

Use this attribute to set a default metric for OSPFv3.

Attribute Name: default-metric

Attribute Type: uint32

Default Value: 20

Attribute Range: 1-16777214

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<default-metric>1</default-metric>

</process>

</processes>

</ospfv3>

Command Syntax

default-metric <1-16777214>

Configure shutdown

Use this attribute to specify an OSPFv3 shutdown

Attribute Name: shutdown

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

</shutdown>

</process>

</processes>

</ospfv3>

Command Syntax

shutdown

Configure log adjacency changes

Use this attribute for the the router to send a SYSLOG message when an OSPFv3 neighbor goes up or down.

Attribute Name: log-adjacency-changes

Attribute Type: enum (brief|detail)

Default Value: brief

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<log-adjacency-changes>brief</log-adjacency-changes>

</process>

</processes>

</ospfv3>

Command Syntax

log-adjacency-changes (brief|detail|)

Configure reference bandwidth

Use this attribute to control how OSPFv3 calculates the default metric for the interface.

Attribute Name: reference-bandwidth

Attribute Type: uint32

Default Value: 100

Attribute Range: 1-4294967

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<reference-bandwidth>1</reference-bandwidth>

</process>

</processes>

</ospfv3>

Command Syntax

auto-cost reference-bandwidth <1-4294967>

Configure max database descriptors

Use this attribute to limit the number of Database Descriptors (DD) that can be processed concurrently.

Attribute Name: max-database-descriptors

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-65535

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<max-database-descriptors>1</max-database-descriptors>

</process>

</processes>

</ospfv3>

Command Syntax

max-concurrent-dd <1-65535>

Configure default distance

Default administrative distance value

Attribute Name: default-distance

Attribute Type: uint8

Default Value: 110

Attribute Range: 1-254

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<administrative-distance>

<default-distance>1</default-distance>

</config>

</administrative-distance>

</process>

</processes>

</ospfv3>

Command Syntax

distance <1-254>

Configure intra area distance

Administrative distance for intra-area routes

Attribute Name: intra-area-distance

Attribute Type: uint8

Default Value: 110

Attribute Range: 1-254

Attribute Name: inter-area-distance

Attribute Type: uint8

Default Value: 110

Attribute Range: 1-254

Attribute Name: external-routes-distance

Attribute Type: uint8

Default Value: 110

Attribute Range: 1-254

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<administrative-distance>

<ospf>

<inter-area-distance>1</inter-area-distance>

<external-routes-distance>1</external-routes-distance>

<intra-area-distance>1</intra-area-distance>

</config>

</ospf>

</administrative-distance>

</process>

</processes>

</ospfv3>

Command Syntax

distance ospfv3 { intra-area <1-254>| inter-area <1-254>| external <1-254> }

Configure disable graceful restart

Graceful OSPFv3 Restart

Attribute Name: disable-graceful-restart

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

</disable-graceful-restart>

</config>

</capability>

</process>

</processes>

</ospfv3>

Command Syntax

no capability restart

Configure exponential max delay

Use this attribute to set the maximum SPF hold delay time in milliseconds

Attribute Name: exponential-max-delay

Attribute Type: uint32

Attribute Range: 0-2147483647

Attribute Name: exponential-min-delay

Attribute Type: uint32

Attribute Range: 0-2147483647

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<spf>

<exponential-min-delay>0</exponential-min-delay>

<exponential-max-delay>0</exponential-max-delay>

</config>

</spf>

</timers>

</process>

</processes>

</ospfv3>

Command Syntax

timers spf exp <0-2147483647> <0-2147483647>

Configure all interfaces

Use this attribute to set all interfaces as passive

Attribute Name: all-interfaces

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<passive-interfaces>

</all-interfaces>

</config>

</passive-interfaces>

</process>

</processes>

</ospfv3>

Command Syntax

passive-interface

Configure name

Use this attribute to set interface as passive or not.

Attribute Name: name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: passive-mode

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<passive-interfaces>

<passive-interface>

<name>IFNAME</name>

<passive-mode>enable</passive-mode>

</config>

</passive-interface>

</passive-interfaces>

</process>

</processes>

</ospfv3>

Command Syntax

passive-interface IFNAME (disable|enable)

Configure address

Use this attribute to summarize or suppress external routes with the specified address range.

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<summary-addresses>

<summary-address>

</config>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address X:X::X:X/M

Configure translate tag

Use this attribute to set or unset translate tag to external routes with the specified address range.

Attribute Name: translate-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Attribute Name: all-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<summary-addresses>

<summary-address>

<all-tag>0</all-tag>

</config>

<translate-tag>0</translate-tag>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address X:X::X:X/M all-tag <0-4294967295> translate-tag <0-4294967295>

Configure not advertise

Use this attribute to set or unset not advertise to summarize or suppress external routes with the specified address range.

Attribute Name: not-advertise

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<summary-addresses>

<summary-address>

</config>

</not-advertise>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address X:X::X:X/M not-advertise

Configure summary-address translate-tag

Use this attribute to set or unset translate tag to external routes with the specified address range.

Attribute Name: translate-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<summary-addresses>

<summary-address>

</config>

<translate-tag>0</translate-tag>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address X:X::X:X/M translate-tag <0-4294967295>

Configure all tag

Use this attribute to set or unset all tag to summarize or suppress external routes with the specified address range.

Attribute Name: all-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<summary-addresses>

<summary-address>

</config>

<all-tag>0</all-tag>

</summary-address>

</summary-addresses>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address X:X::X:X/M all-tag <0-4294967295>

Configure originate

Attribute Name: originate

Attribute Type: uint8

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<default-information>

</originate>

</config>

</default-information>

</process>

</processes>

</ospfv3>

Command Syntax

default-information originate

Configure route map

Use this attribute to set route-map instance.

Attribute Name: route-map

Attribute Type: string

Attribute Range: 1-63

Attribute Name: originate

Attribute Type: empty

Attribute Name: always-advertise-default-route

Attribute Type: empty

Attribute Name: metric

Attribute Type: uint32

Default Value: 20

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<default-information>

</originate>

</always-advertise-default-route>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

</config>

</default-information>

</process>

</processes>

</ospfv3>

Command Syntax

default-information originate { always| metric <0-16777214>| metric-type (1|2)| route-map WORD }

Configure access control list

Use this attribute to set the access control list name in distribution list.

This command is supported when following feature are enabled HAVE_ACL

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<distribute-list>

<filter-in>

<access-control-list>WORD</access-control-list>

</config>

</filter-in>

</distribute-list>

</process>

</processes>

</ospfv3>

Command Syntax

distribute-list WORD in

Configure protocol

Use this attribute to import routes from other routing protocols, or from another OSPF instance, into OSPFv3 ASexternal-LSAs.

This command is supported when following feature are enabled HAVE_ACL

Attribute Name: protocol

Attribute Type: enum (connected|static|rip|bgp|isis)

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<distribute-list>

<filter-out>

<routing-protocols>

<routing-protocol>

<protocol>connected</protocol>

<protocol>connected</protocol>

<access-control-list>WORD</access-control-list>

</config>

</routing-protocol>

</routing-protocols>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv3>

Command Syntax

distribute-list WORD out (connected|static|rip|bgp|isis)

Configure ospf process id

Use this attribute to filter networks in routing updates.

This command is supported when following feature are enabled HAVE_ACL

Attribute Name: ospf-process-id

Attribute Type: string

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<distribute-list>

<filter-out>

<ospf-processes>

<ospf-process>

<ospf-process-id>1-65535</ospf-process-id>

<ospf-process-id>WORD</ospf-process-id>

<access-control-list>WORD</access-control-list>

</config>

</ospf-process>

</ospf-processes>

</filter-out>

</distribute-list>

</process>

</processes>

</ospfv3>

Command Syntax

distribute-list WORD out ospf (WORD|)

Configure routing-protocols protocol

Use this attribute to import routes from other routing protocols, or from another OSPF instance, into OSPFv3 ASexternal-LSAs.

Attribute Name: protocol

Attribute Type: enum (connected|static|rip|bgp|isis)

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<routing-protocols>

<routing-protocol>

<protocol>connected</protocol>

<protocol>connected</protocol>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute (connected|static|rip|bgp|isis)

Configure metric

Use this attribute to inform the value of the metric for OSPFv3 default route.

Attribute Name: metric

Attribute Type: uint32

Default Value: 1

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Attribute Name: route-map

Attribute Type: string

Attribute Name: route-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<routing-protocols>

<routing-protocol>

<protocol>connected</protocol>

<protocol>connected</protocol>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

<route-tag>0</route-tag>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute (connected|static|rip|bgp|isis) { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure ospf-processes ospf-process-id

Use this attribute to specify OSPF routes.

Attribute Name: ospf-process-id

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<ospf-processes>

<ospf-process>

<ospf-process-id>WORD</ospf-process-id>

<ospf-process-id>WORD</ospf-process-id>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute ospf (WORD|)

Configure metric type

Use this attribute to inform the value of the metric for OSPFv3 default route.

Attribute Name: metric

Attribute Type: uint32

Default Value: 1

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Attribute Name: route-map

Attribute Type: string

Attribute Name: route-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<ospf-processes>

<ospf-process>

<ospf-process-id>WORD</ospf-process-id>

<ospf-process-id>WORD</ospf-process-id>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

<route-tag>0</route-tag>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute ospf (WORD|) { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure default cost

Use this attribute to set the cost for default summary route sent into a stub area. If an area is configured as a stub, the OSPFv3 router originates one type-3 inter-area-prefix-LSA into the stub area. This attribute changes the metric for this LSA.

Attribute Name: default-cost

Attribute Type: uint32

Default Value: 1

Attribute Range: 0-16777215

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<default-cost>0</default-cost>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area (A.B.C.D|<0-4294967295>) default-cost <0-16777215>

Configure no summary

Use this attribute to do not inject inter-area routes into stub.

Attribute Name: no-summary

Attribute Type: empty

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<stub>

</enable>

</no-summary>

</config>

</stub>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area stub no-summary

Configure enable

Use this attribute to define an area as a stub area on all routers.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<stub>

</enable>

</config>

</stub>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area stub

Configure area id

Use this attribute to set an area as a Not-So-Stubby-Area (NSSA).

This command is supported when following feature are enabled HAVE_NSSA

Attribute Name: enable

Attribute Type: uint8

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<nssa>

</enable>

</config>

</nssa>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area nssa

Configure remote router id

Use this attribute to set the interface IP address of the neighbor.

Attribute Name: remote-router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area virtual-link A.B.C.D

Configure bfd fall over

Use this attribute to enable BFD on a virtual-link.

Attribute Name: bfd-fall-over

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

</bfd-fall-over>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area virtual-link A.B.C.D fall-over bfd

Configure instance id

The OSPFv3 instance.

Attribute Name: instance-id

Attribute Type: uint8

Default Value: 0

Attribute Range: 0-31,64-95

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<instance-id>0</instance-id>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area virtual-link A.B.C.D instance-id (<0-31>|<64-95>)

Configure authentication cryptomap

Use this attribute to set the Crypto-map used to setup IPsec SA.

Attribute Name: authentication-cryptomap

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<authentication-cryptomap>WORD</authentication-cryptomap>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area virtual-link A.B.C.D authentication cryptomap WORD

Configure dead interval

Use this command to set the amount of time that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.

Attribute Name: dead-interval

Attribute Type: uint16

Default Value: 40

Attribute Range: 1-65535

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Attribute Name: transmission-delay

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-1800

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-1800

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<virtual-links>

<virtual-link>

<remote-router-id>A.B.C.D</remote-router-id>

<remote-router-id>A.B.C.D</remote-router-id>

</config>

<hello-interval>1</hello-interval>

<transmission-delay>1</transmission-delay>

<retransmission-interval>1</retransmission-interval>

<dead-interval>1</dead-interval>

</config>

</timers>

</virtual-link>

</virtual-links>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area virtual-link A.B.C.D { dead-interval <1-65535>| hello-interval <1-65535>| transmit-delay <1-1800>| retransmit-interval <1-1800> }

Configure address-ranges address

Use this attribute to configure the OSPFv3 address range.

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<address-ranges>

<address-range>

</config>

</address-range>

</address-ranges>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area range X:X::X:X/M

Configure address-range not-advertise

Use this attribute to Specify to advertise / non-advertise the OSPFv3 address range.

Attribute Name: not-advertise

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<address-ranges>

<address-range>

</config>

</not-advertise>

</address-range>

</address-ranges>

</area>

</areas>

</process>

</processes>

</ospfv3>

Command Syntax

area range X:X::X:X/M not-advertise

Configure address-ranges address

Use this attribute to configure the OSPFv3 address range for IPv4 address family.

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<address-ranges>

<address-range>

</config>

</address-range>

</address-ranges>

</area>

</areas>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

area (A.B.C.D|<0-4294967295>) range A.B.C.D/M

Configure address-range not-advertise

Use this attribute to Specify to advertise / non-advertise the OSPFv3 address range for IPv4 address family.

Attribute Name: not-advertise

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<areas>

<area>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

</config>

<address-ranges>

<address-range>

</config>

</not-advertise>

</address-range>

</address-ranges>

</area>

</areas>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

area range A.B.C.D/M not-advertise

Configure summary-addresses address

Use this attribute to summarize or suppress external routes with the specified address range.

Attribute Name: address

Attribute Type: string

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<summary-addresses>

<summary-address>

</config>

</summary-address>

</summary-addresses>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address A.B.C.D/M

Configure summary-address not-advertise

Use this attribute to summarize or suppress external routes with the specified address range.

Attribute Name: not-advertise

Attribute Type: empty

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<summary-addresses>

<summary-address>

</config>

</not-advertise>

</summary-address>

</summary-addresses>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address A.B.C.D/M not-advertise

Configure tag

Use this attribute to configure the Tag value to use as a match value for controlling redistribution via route maps.

Attribute Name: tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<summary-addresses>

<summary-address>

</config>

</summary-address>

</summary-addresses>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

summary-address A.B.C.D/M tag <0-4294967295>

Configure default-information originate

Attribute Name: originate

Attribute Type: uint8

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<default-information>

</originate>

</config>

</default-information>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

default-information originate

Configure always advertise default route

Use this attribute to set route-map instance.

Attribute Name: route-map

Attribute Type: string

Attribute Range: 1-63

Attribute Name: originate

Attribute Type: empty

Attribute Name: always-advertise-default-route

Attribute Type: empty

Attribute Name: metric

Attribute Type: uint32

Default Value: 20

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<default-information>

</originate>

</always-advertise-default-route>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

</config>

</default-information>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

default-information originate { always| metric <0-16777214>| metric-type (1|2)| route-map WORD }

Configure protocol af

Use this attribute to import routes from other routing protocols, or from another OSPF instance, into OSPFv3 ASexternal-LSAs.

Attribute Name: protocol-af

Attribute Type: enum (connected|static|rip|bgp|isis)

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<routing-protocols>

<routing-protocol>

<protocol-af>connected</protocol-af>

<protocol-af>connected</protocol-af>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute (connected|static|rip|bgp|isis)

Configure route tag

Use this attribute to inform the value of the metric for OSPFv3 default route.

Attribute Name: metric

Attribute Type: uint32

Default Value: 1

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Attribute Name: route-map

Attribute Type: string

Attribute Name: route-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<routing-protocols>

<routing-protocol>

<protocol-af>connected</protocol-af>

<protocol-af>connected</protocol-af>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

<route-tag>0</route-tag>

</config>

</routing-protocol>

</routing-protocols>

</redistribute>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute (connected|static|rip|bgp|isis) { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure ospfv2 process id

Use this attribute to specify OSPF routes.

Attribute Name: ospfv2-process-id

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<ospf-processes>

<ospf-process>

<ospfv2-process-id>0</ospfv2-process-id>

<ospfv2-process-id>0</ospfv2-process-id>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute ospf (<0-65535>|)

Configure ospf-process metric

Use this attribute to inform the value of the metric for OSPFv3 default route.

Attribute Name: metric

Attribute Type: uint32

Default Value: 1

Attribute Range: 0-16777214

Attribute Name: metric-type

Attribute Type: enum (1|2)

Default Value: 2

Attribute Name: route-map

Attribute Type: string

Attribute Name: route-tag

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<ospfv3-id>WORD</ospfv3-id>

<ospfv3-id>0</ospfv3-id>

</config>

<address-family>

<ipv4>

<ospf-processes>

<ospf-process>

<ospfv2-process-id>0</ospfv2-process-id>

<ospfv2-process-id>0</ospfv2-process-id>

<metric-type>2</metric-type>

<route-map>WORD</route-map>

<route-tag>0</route-tag>

</config>

</ospf-process>

</ospf-processes>

</redistribute>

</ipv4>

</address-family>

</process>

</processes>

</ospfv3>

Command Syntax

redistribute ospf (<0-65535>|) { metric <0-16777214>| metric-type (1|2)| route-map WORD| tag <0-4294967295> }

Configure retransmission

OSPFv3 retransmission information

Attribute Name: retransmission

Attribute Type: uint8

Attribute Name: bfd

Attribute Type: empty

Attribute Name: events

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

</bfd>

<ifsm>status</ifsm>

<lsa>generate</lsa>

<nfsm>status</nfsm>

<nsm>interface</nsm>

<rib>interface</rib>

<packet-hello>send</packet-hello>

<packet-dd>send</packet-dd>

<packet-ls-request>send</packet-ls-request>

<packet-ls-update>send</packet-ls-update>

<packet-ls-ack>send</packet-ls-ack>

</retransmission>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf

Configure bfd

OSPFv3 retransmission information

Attribute Name: retransmission

Attribute Type: uint8

Attribute Name: bfd

Attribute Type: empty

Attribute Name: events

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

</bfd>

<ifsm>status</ifsm>

<lsa>generate</lsa>

<nfsm>status</nfsm>

<nsm>interface</nsm>

<rib>interface</rib>

<packet-hello>send</packet-hello>

<packet-dd>send</packet-dd>

<packet-ls-request>send</packet-ls-request>

<packet-ls-update>send</packet-ls-update>

<packet-ls-ack>send</packet-ls-ack>

</retransmission>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf all

Configure debug bfd

Bidirectional Forwarding Detection (BFD)

Attribute Name: bfd

Attribute Type: empty

Netconf edit-config payload

<debug>

</bfd>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf bfd

Configure debug retransmission

OSPFv3 retransmission information

Attribute Name: retransmission

Attribute Type: empty

Netconf edit-config payload

<debug>

</retransmission>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf retransmission

Configure events

OSPFv3 events information

Attribute Name: events

Netconf edit-config payload

<debug>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf events ({abr|asbr|vlink|os|router|nssa}|)

Configure ifsm

Use this attribute to enable OSPFv3 Interface State Machine debug

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf edit-config payload

<debug>

<ifsm>status</ifsm>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf ifsm ({status|events|timers}|)

Configure lsa

Use this attribute to enable OSPFv3 Link State Advertisement debug

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf edit-config payload

<debug>

<lsa>generate</lsa>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf lsa ({generate|flooding|install|refresh|maxage}|)

Configure nfsm

Use this attribute to enable OSPFv3 Neighbor State Machine debug

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf edit-config payload

<debug>

<nfsm>status</nfsm>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf nfsm ({status|events|timers}|)

Configure nsm

Use this attribute to enable OSPFv3 NSM information debug

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf edit-config payload

<debug>

<nsm>interface</nsm>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf nsm ({interface|redistribute}|)

Configure rib

Use this attribute to enable OSPFv3 RIB information debug

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf edit-config payload

<debug>

<rib>interface</rib>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf rib ({interface|redistribute}|)

Configure route

Use this attribute to enable OSPFv3 route information debug

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install)

Netconf edit-config payload

<debug>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf route ({spf|ia|ase|install}|)

Configure packet hello

OSPFv3 Hello

Attribute Name: packet-hello

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-hello>send</packet-hello>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf packet hello ({send|recv|detail}|)

Configure packet dd

OSPFv3 Database Description

Attribute Name: packet-dd

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-dd>send</packet-dd>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf packet dd ({send|recv|detail}|)

Configure packet ls request

OSPFv3 Link State Request

Attribute Name: packet-ls-request

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-request>send</packet-ls-request>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf packet ls-request ({send|recv|detail}|)

Configure packet ls update

OSPFv3 Link State Update

Attribute Name: packet-ls-update

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-update>send</packet-ls-update>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf packet ls-update ({send|recv|detail}|)

Configure packet ls ack

OSPFv3 Link State Acknowledgment

Attribute Name: packet-ls-ack

Attribute Type: bits (send|recv|detail)

Netconf edit-config payload

<debug>

<packet-ls-ack>send</packet-ls-ack>

</config>

</debug>

</ospfv3>

Command Syntax

debug ipv6 ospf packet ls-ack ({send|recv|detail}|)

debug ipv6 ospf

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ospf-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

debug ipv6 ospf

no debug ipv6 ospf

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ospf-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

no debug ipv6 ospf

debug ipv6 ospf all

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ospf-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

debug ipv6 ospf all

no debug ipv6 ospf all

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ospf-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

no debug ipv6 ospf all

debug ipv6 ospf bfd

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-bfd-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

debug ipv6 ospf bfd

no debug ipv6 ospf bfd

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-bfd-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

no debug ipv6 ospf bfd

debug ipv6 ospf retransmission

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-retransmission-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

debug ipv6 ospf retransmission

no debug ipv6 ospf retransmission

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-retransmission-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

no debug ipv6 ospf retransmission

debug ipv6 ospf events ({abr|asbr|vlink|os|router|nssa}|)

Attribute Name: events

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-events-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-events-on>

Command Syntax

debug ipv6 ospf events ({abr|asbr|vlink|os|router|nssa}|)

no debug ipv6 ospf events ({abr|asbr|vlink|os|router|nssa}|)

Attribute Name: events

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-events-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-events-off>

Command Syntax

no debug ipv6 ospf events ({abr|asbr|vlink|os|router|nssa}|)

debug ipv6 ospf ifsm ({status|events|timers}|)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ifsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ifsm>status</ifsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-ifsm-on>

Command Syntax

debug ipv6 ospf ifsm ({status|events|timers}|)

no debug ipv6 ospf ifsm ({status|events|timers}|)

Attribute Name: ifsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-ifsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ifsm>status</ifsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-ifsm-off>

Command Syntax

no debug ipv6 ospf ifsm ({status|events|timers}|)

debug ipv6 ospf lsa ({generate|flooding|install|refresh|maxage}|)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-lsa-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<lsa>generate</lsa>

</ipi-ospfv3-debug_ospfv3-terminal-debug-lsa-on>

Command Syntax

debug ipv6 ospf lsa ({generate|flooding|install|refresh|maxage}|)

no debug ipv6 ospf lsa ({generate|flooding|install|refresh|maxage}|)

Attribute Name: lsa

Attribute Type: bits (generate|flooding|install|refresh|maxage)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-lsa-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<lsa>generate</lsa>

</ipi-ospfv3-debug_ospfv3-terminal-debug-lsa-off>

Command Syntax

no debug ipv6 ospf lsa ({generate|flooding|install|refresh|maxage}|)

debug ipv6 ospf nfsm ({status|events|timers}|)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-nfsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<nfsm>status</nfsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-nfsm-on>

Command Syntax

debug ipv6 ospf nfsm ({status|events|timers}|)

no debug ipv6 ospf nfsm ({status|events|timers}|)

Attribute Name: nfsm

Attribute Type: bits (status|events|timers)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-nfsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<nfsm>status</nfsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-nfsm-off>

Command Syntax

no debug ipv6 ospf nfsm ({status|events|timers}|)

debug ipv6 ospf nsm ({interface|redistribute}|)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-nsm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<nsm>interface</nsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-nsm-on>

Command Syntax

debug ipv6 ospf nsm ({interface|redistribute}|)

no debug ipv6 ospf nsm ({interface|redistribute}|)

Attribute Name: nsm

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-nsm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<nsm>interface</nsm>

</ipi-ospfv3-debug_ospfv3-terminal-debug-nsm-off>

Command Syntax

no debug ipv6 ospf nsm ({interface|redistribute}|)

debug ipv6 ospf packet ({send|recv|detail}|)

Attribute Name: all

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-all-on>

Command Syntax

debug ipv6 ospf packet ({send|recv|detail}|)

no debug ipv6 ospf packet ({send|recv|detail}|)

Attribute Name: all

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-all-off>

Command Syntax

no debug ipv6 ospf packet ({send|recv|detail}|)

debug ipv6 ospf packet hello ({send|recv|detail}|)

Attribute Name: hello

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-hello-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-hello-on>

Command Syntax

debug ipv6 ospf packet hello ({send|recv|detail}|)

no debug ipv6 ospf packet hello ({send|recv|detail}|)

Attribute Name: hello

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-hello-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-hello-off>

Command Syntax

no debug ipv6 ospf packet hello ({send|recv|detail}|)

debug ipv6 ospf packet dd ({send|recv|detail}|)

Attribute Name: dd

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-dd-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-dd-on>

Command Syntax

debug ipv6 ospf packet dd ({send|recv|detail}|)

no debug ipv6 ospf packet dd ({send|recv|detail}|)

Attribute Name: dd

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-dd-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-dd-off>

Command Syntax

no debug ipv6 ospf packet dd ({send|recv|detail}|)

debug ipv6 ospf packet ls-request ({send|recv|detail}|)

Attribute Name: ls-request

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-request-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-request>send</ls-request>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-request-on>

Command Syntax

debug ipv6 ospf packet ls-request ({send|recv|detail}|)

no debug ipv6 ospf packet ls-request ({send|recv|detail}|)

Attribute Name: ls-request

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-request-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-request>send</ls-request>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-request-off>

Command Syntax

no debug ipv6 ospf packet ls-request ({send|recv|detail}|)

debug ipv6 ospf packet ls-update ({send|recv|detail}|)

Attribute Name: ls-update

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-update-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-update>send</ls-update>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-update-on>

Command Syntax

debug ipv6 ospf packet ls-update ({send|recv|detail}|)

no debug ipv6 ospf packet ls-update ({send|recv|detail}|)

Attribute Name: ls-update

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-update-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-update>send</ls-update>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-update-off>

Command Syntax

no debug ipv6 ospf packet ls-update ({send|recv|detail}|)

debug ipv6 ospf packet ls-ack ({send|recv|detail}|)

Attribute Name: ls-ack

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-ack-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-ack>send</ls-ack>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-ack-on>

Command Syntax

debug ipv6 ospf packet ls-ack ({send|recv|detail}|)

no debug ipv6 ospf packet ls-ack ({send|recv|detail}|)

Attribute Name: ls-ack

Attribute Type: bits (send|recv|detail)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-ack-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<ls-ack>send</ls-ack>

</ipi-ospfv3-debug_ospfv3-terminal-debug-packet-ls-ack-off>

Command Syntax

no debug ipv6 ospf packet ls-ack ({send|recv|detail}|)

debug ipv6 ospf rib ({interface|redistribute}|)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-rib-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<rib>interface</rib>

</ipi-ospfv3-debug_ospfv3-terminal-debug-rib-on>

Command Syntax

debug ipv6 ospf rib ({interface|redistribute}|)

no debug ipv6 ospf rib ({interface|redistribute}|)

Attribute Name: rib

Attribute Type: bits (interface|redistribute)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-rib-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<rib>interface</rib>

</ipi-ospfv3-debug_ospfv3-terminal-debug-rib-off>

Command Syntax

no debug ipv6 ospf rib ({interface|redistribute}|)

debug ipv6 ospf route ({spf|ia|ase|install}|)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-route-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-route-on>

Command Syntax

debug ipv6 ospf route ({spf|ia|ase|install}|)

no debug ipv6 ospf route ({spf|ia|ase|install}|)

Attribute Name: route

Attribute Type: bits (spf|ia|ase|install)

Netconf RPC payload

<ipi-ospfv3-debug_ospfv3-terminal-debug-route-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

</ipi-ospfv3-debug_ospfv3-terminal-debug-route-off>

Command Syntax

no debug ipv6 ospf route ({spf|ia|ase|install}|)

clear ipv6 ospf (WORD|) process

Attribute Name: process-id

Attribute Type: string

Netconf RPC payload

<ipi-ospfv3-global_ospfv3-clear-process xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<process-id>WORD</process-id>

</ipi-ospfv3-global_ospfv3-clear-process>

Command Syntax

clear ipv6 ospf (WORD|) process

restart ipv6 ospf graceful (grace-period <2-1800>|)

Attribute Name: grace-period

Attribute Type: uint16

Attribute Range: 2-1800

Netconf RPC payload

<ipi-ospfv3-global_ospfv3-graceful-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3">

<grace-period>2</grace-period>

</ipi-ospfv3-global_ospfv3-graceful-restart>

Command Syntax

restart ipv6 ospf graceful (grace-period <2-1800>|)

snmp restart ospf6

Netconf RPC payload

<ipi-ospfv3-global_ospfv3-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ospfv3"/>

Command Syntax

snmp restart ospf6

IPI-OSPFV3-INTERFACE

Configure shutdown

Use this attribute to shutdown OSPFV3 on the interface

Attribute Name: shutdown

Attribute Type: empty

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

</shutdown>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ospfv3 shutdown

Configure enable link lsa suppression

Use this attribute to enable or disable link LSA (type 8) suppression. A type 8 LSA gives information about link-local addresses and a list of IPv6 addresses on the link. If enabled and the interface type is not broadcast or NBMA, the router does not send type 8 link LSAs. This implies that other routers on the link determine the router’s next-hop address using a mechanism other than the type 8 link LSA. This feature is implicitly disabled if the interface type is broadcast or NBMA.

Attribute Name: enable-link-lsa-suppression

Attribute Type: uint8

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</enable-link-lsa-suppression>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf link-lsa-suppression enable (instance-id (<0-31>|<64-95>)|)

Configure enable bfd

Use this attribute to enable Bidirectional Forwarding Detection (BFD)

Attribute Name: enable-bfd

Attribute Type: boolean

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<enable-bfd>true</enable-bfd>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf bfd (instance-id (<0-31>|<64-95>)|)

Configure interface name

Use this attribute to enable Bidirectional Forwarding Detection (BFD)

Attribute Name: enable-bfd

Attribute Type: boolean

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<enable-bfd>true</enable-bfd>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf bfd disable (instance-id (<0-31>|<64-95>)|)

Configure instance id

Attribute Name: enable-link-lsa-suppression

Attribute Type: uint8

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</enable-link-lsa-suppression>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf link-lsa-suppression enable (instance-id (<0-31>|<64-95>)|)

Configure instance enable-bfd

Use this attribute to enable Bidirectional Forwarding Detection (BFD)

Attribute Name: enable-bfd

Attribute Type: boolean

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<enable-bfd>true</enable-bfd>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf bfd (instance-id (<0-31>|<64-95>)|)

Configure instance enable-bfd

Use this attribute to enable Bidirectional Forwarding Detection (BFD)

Attribute Name: enable-bfd

Attribute Type: boolean

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<enable-bfd>true</enable-bfd>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf bfd disable (instance-id (<0-31>|<64-95>)|)

Configure network type

Use this attribute to set an OSPFv3 network type.

Attribute Name: network-type

Attribute Type: enum (point-to-point|broadcast|non-broadcast|point-to-multipoint|point-to-multipoint non-broadcast)

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<network-type>point-to-point</network-type>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

Configure cost

Use this attribute to specify the link-cost described in LSAs.The cost (or metric) of an interface in OSPF indicates the overhead required to send packets across a certain interface. The value is taken to describe Link State information, and used for route calculation.

Attribute Name: cost

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf cost <1-65535> (instance-id (<0-31>|<64-95>)|)

Configure priority

Use this attribute to set the router priority for determining the designated router (DR) for the network. A router with the higher router priority becomes the DR. If the priority is the same for two routers, the router with the higher router ID takes precedence. Only routers with a nonzero priority value are eligible to become the designated or backup designated router. Configure router priority for broadcast or NBMA networks only and not for point-to-point networks.

Attribute Name: priority

Attribute Type: uint8

Default Value: 1

Attribute Range: 0-255

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf priority <0-255> (instance-id (<0-31>|<64-95>)|)

Configure mtu

Use this attribute to set MTU size for OSPFv3 to construct packets based on this value. Whenever OSPFv3 constructs packets, it uses interface MTU size as Maximum IP packet size. this attribute forces OSPFv3 to use the specified value overriding the actual interface MTU size.

Attribute Name: mtu

Attribute Type: uint16

Default Value: 1500

Attribute Range: 1280-65535

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf mtu <1280-65535> (instance-id (<0-31>|<64-95>)|)

Configure mtu ignore

Use this attribute to ignore the MTU size during DD (Database Description) exchange. By default, during the DD exchange process, OSPFv3 checks the MTU size described in DD packets received from its neighbor, and if the MTU size does not match the interface MTU, the neighbor adjacency is not established. Using this command makes OSPFv3 ignore this check and allows establishing of adjacency regardless of MTU size in the DD packet.

Attribute Name: mtu-ignore

Attribute Type: empty

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

</mtu-ignore>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf mtu-ignore (instance-id (<0-31>|<64-95>)|)

Configure authentication cryptomap

Use this attribute to set the Crypto-map used to setup IPsec SA.

Attribute Name: authentication-cryptomap

Attribute Type: string

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<authentication-cryptomap>WORD</authentication-cryptomap>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf (instance-id (<0-31>|<64-95>)|) authentication cryptomap WORD

Configure area id

Use this attribute to enable OSPFv3 routing on an interface. Specify the process ID to configure multiple instances of OSPFv3. When running a single instance of OSPFv3, you do not need to specify a instance ID. When OSPFv3 receives a packet, it checks if the instance ID in the packet matches the instance ID of the receiving interface.

Attribute Name: area-id

Attribute Type: union

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

<ospfv3-id>WORD</ospfv3-id>

</config>

<ospfv3-id>WORD</ospfv3-id>

</router>

</routers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 router ospf area (A.B.C.D|<0-4294967295>) (instance-id (<0-31>|<64-95>)|)

Configure ospfv3 id

Attribute Name: area-id

Attribute Type: uint32

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

<ospfv3-id>WORD</ospfv3-id>

</config>

<ospfv3-id>WORD</ospfv3-id>

</router>

</routers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 router ospf area (instance-id (<0-31>|<64-95>)|)

Configure router area-id

Attribute Name: area-id

Attribute Type: uint32

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

<ospfv3-id>WORD</ospfv3-id>

</config>

<ospfv3-id>WORD</ospfv3-id>

</router>

</routers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 router ospf tag WORD area (instance-id (<0-31>|<64-95>)|)

Configure router ospfv3-id

Attribute Name: ospfv3-id

Attribute Type: string

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<area-id>OSPFV3_AREA_T</area-id>

<area-id>OSPFV3_AREA_T</area-id>

<ospfv3-id>WORD</ospfv3-id>

</config>

<ospfv3-id>WORD</ospfv3-id>

</router>

</routers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 router ospf area tag WORD (instance-id (<0-31>|<64-95>)|)

Configure dead interval

Use this attribute to set the amount of time that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down

Attribute Name: dead-interval

Attribute Type: uint16

Default Value: 40

Attribute Range: 1-65535

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<dead-interval>1</dead-interval>

</config>

</timers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf dead-interval <1-65535> (instance-id (<0-31>|<64-95>)|)

Configure hello interval

Use this attribute to set the interval between hello packets.

Attribute Name: hello-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<hello-interval>1</hello-interval>

</config>

</timers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf hello-interval <1-65535> (instance-id (<0-31>|<64-95>)|)

Configure transmission delay

Use this attribute to set the estimated time it takes to transmit a Link State Update packet over the interface.

Attribute Name: transmission-delay

Attribute Type: uint16

Default Value: 1

Attribute Range: 1-1800

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<transmission-delay>1</transmission-delay>

</config>

</timers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf transmit-delay <1-1800> (instance-id (<0-31>|<64-95>)|)

Configure retransmission interval

Use this attibute to set the interval between retransmission of Link State Update packets.

Attribute Name: retransmission-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-1800

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<retransmission-interval>1</retransmission-interval>

</config>

</timers>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf retransmit-interval <1-1800> (instance-id (<0-31>|<64-95>)|)

Configure address

Static neighbor IPv6 link-local address

Attribute Name: address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<neighbors-static>

<neighbor-static>

</config>

</neighbor-static>

</neighbors-static>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf neighbor X:X::X:X (instance-id (<0-31>|<64-95>)|)

Configure neighbors-static address

Static neighbor IPv6 link-local address

Attribute Name: address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<neighbors-static>

<neighbor-static>

</config>

</neighbor-static>

</neighbors-static>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf neighbor X:X::X:X (instance-id (<0-31>|<64-95>)|)

Configure poll interval

Use this attribute to set the dead neighbor polling interval in seconds. It is recommended to set this value much higher than the hello interval. The default is 120 seconds.

Attribute Name: poll-interval

Attribute Type: uint32

Default Value: 120

Attribute Range: 0-4294967295

Attribute Name: cost

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Attribute Name: priority

Attribute Type: uint8

Default Value: 0

Attribute Range: 0-255

Netconf edit-config payload

<interface-name>WORD</interface-name>

<interface-name>WORD</interface-name>

</config>

<instance-id>0</instance-id>

<instance-id>0</instance-id>

</config>

<neighbors-static>

<neighbor-static>

</config>

<poll-interval>0</poll-interval>

</neighbor-static>

</neighbors-static>

</instance>

</instances>

</interface>

</interfaces>

</ospfv3>

Command Syntax

ipv6 ospf neighbor X:X::X:X { cost <1-65535>| priority <0-255>| poll-interval <0-4294967295> } (instance-id (<0-31>|<64-95>)|)

IPI-BGP

Configure enable aggregate nexthop

Use this attribute to set the BGP option to perform aggregation only when next-hop matches the specified IP address.

Attribute Name: enable-aggregate-nexthop

Attribute Type: empty

Netconf edit-config payload

</enable-aggregate-nexthop>

</config>

</global>

</bgp>

Command Syntax

bgp aggregate-nexthop-check

Configure enable path select

Use this attribute to set RFC 1771 compatible path selection

Attribute Name: enable-path-select

Attribute Type: empty

Netconf edit-config payload

</enable-path-select>

</config>

</global>

</bgp>

Command Syntax

bgp rfc1771-path-select

Configure disable rfc7606 error handling

Use this attribute to Disable RFC7606 revised error handling.

Attribute Name: disable-rfc7606-error-handling

Attribute Type: empty

Netconf edit-config payload

</disable-rfc7606-error-handling>

</config>

</global>

</bgp>

Command Syntax

bgp disable-rfc7606-error-handling

Configure enable bogon filtering

Use this attribute to enable BOGON filtering

Attribute Name: enable-bogon-filtering

Attribute Type: empty

Netconf edit-config payload

</enable-bogon-filtering>

</config>

</global>

</bgp>

Command Syntax

bgp enable-bogon-filtering

Configure enable extended asn capability

Use this attribute to configure a BGP router to send 4-octet ASN capabilities. If attempting to change the AS capability from 2 to 4 or 4 to 2, a prompt occurs to remove the VRF configuration (if it exists), and reconfiguration is required,because the route distinguisher (RD) configuration would have been created with the current (2 octet or 4 octet) capability, and must be reconfigured before attempting to change the capability. While loading from a saved configuration with AS4 capability and BGP VRF configuration, the capability will not be changed because of the above described reason.

Attribute Name: enable-extended-asn-capability

Attribute Type: empty

Netconf edit-config payload

</enable-extended-asn-capability>

</config>

</global>

</bgp>

Command Syntax

bgp extended-asn-cap

Configure enable nexthop tracking

Use this attribute to enable nexthop address tracking. Nexthop address tracking is an event-driven notification system that monitors the status of routes installed in the Routing Information Base (RIB) and reports nexthop changes that affect internal BGP (iBGP) or external BGP (eBGP) prefixes directly to the BGP process. This improves the overall BGP convergence time, by allowing BGP to respond rapidly to nexthop changes for routes installed in the RIB. If nexthop tracking is enabled after certain routes are learned, the registration of all nexthops for selected BGP routes is done after the nexthop tracking feature is enabled. If nexthop tracking is disabled, and if there are still some selected BGP routes, BGP de-registers the nexthops of all selected BGP routes from NSM.

Attribute Name: enable-nexthop-tracking

Attribute Type: empty

Netconf edit-config payload

</enable-nexthop-tracking>

</config>

</global>

</bgp>

Command Syntax

bgp nexthop-trigger enable

Configure nexthop tracking delay

Use this attribute to set the delay time for nexthop address tracking. This attribute configures the delayinterval between routing table walks for nexthop delay tracking, after which BGP does a routing table scan on receiving a nexthop change trigger from NSM. The time period determines how long BGP waits before it walks the full BGP table to determine which prefixes are affected by the nexthop changes, after it receives the trigger from NSM about one or more nexthop changes.

Attribute Name: nexthop-tracking-delay

Attribute Type: uint8

Default Value: 5

Attribute Range: 1-100

Netconf edit-config payload

<nexthop-tracking-delay>1</nexthop-tracking-delay>

</config>

</global>

</bgp>

Command Syntax

bgp nexthop-trigger delay <1-100>

Configure enable rfc 1771 strict origin

Use this attribute to set the origin path attribute to IGP when the origin is a protocol such as RIP, OSPF,or ISIS as specified in RFC 1771. Otherwise, the origin is always set to incomplete which is the industry standard.

Attribute Name: enable-rfc-1771-strict-origin

Attribute Type: empty

Netconf edit-config payload

</enable-rfc-1771-strict-origin>

</config>

</global>

</bgp>

Command Syntax

bgp rfc1771-strict

Configure action name

Use this attribute to specify a standard community list (1 to 99) that specifies BGP community attributes.

Attribute Name: action-name

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<numbered-lists>

<numbered-list>

<standard-number>1</standard-number>

<standard-number>1</standard-number>

</config>

<action-for-any>

<action-name>deny</action-name>

</config>

</action-for-any>

</numbered-list>

</numbered-lists>

</community-lists>

</global>

</bgp>

Command Syntax

ip community-list <1-99> (deny|permit)

Configure action standard number

Use this attribute to specify a standard community list (1 to 99) that specifies BGP community attributes.

Attribute Name: action-standard-number

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<numbered-lists>

<numbered-list>

<standard-number>1</standard-number>

<standard-number>1</standard-number>

</config>

<action-list-values>

<action-list-value>

<standard-number-value>AA:NN</standard-number-value>

<standard-number-value>WORD</standard-number-value>

<action-standard-number>deny</action-standard-number>

</config>

<action-standard-number>deny</action-standard-number>

</action-list-value>

</action-list-values>

</numbered-list>

</numbered-lists>

</community-lists>

</global>

</bgp>

Command Syntax

Configure list type

Use this attribute to specify a standard community list (1 to 99) that specifies BGP community attributes.

Attribute Name: action-name

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<list-type>standard</list-type>

</config>

<list-type>standard</list-type>

<action-for-any>

<action-name>deny</action-name>

</config>

</action-for-any>

</standard>

</standards>

</community-lists>

</global>

</bgp>

Command Syntax

ip community-list (standard) WORD (deny|permit)

Configure action name standard

Use the community-lists to specify BGP community attributes. The community attribute is used for implementing policy routing. It is an optional, transitive attribute and facilitates transfer of local policies through different autonomous systems. It includes community values that are 32 bits long. There are two kinds of community-lists: expanded and standard. The standard community-list defines the community attributes in a specified format without regular expressions. The expanded community-list defines the community attributes with regular expressions.Use this attribute to add a standard community-list entry. The standard community-list is compiled into binary format and is directly compared with the BGP communities attribute in the BGP updates. The comparison is faster than the expanded community-list. Any community value that does not match the standard community value is automatically treated as expanded.

Attribute Name: action-name-standard

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<list-type>standard</list-type>

</config>

<list-type>standard</list-type>

<action-values>

<action-value>

<community-value-standard>AA:NN</community-value-standard>

<community-value-standard>WORD</community-value-standard>

<action-name-standard>deny</action-name-standard>

</config>

<action-name-standard>deny</action-name-standard>

</action-value>

</action-values>

</standard>

</standards>

</community-lists>

</global>

</bgp>

Command Syntax

Configure name

Attribute Name: action-name-standard

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<list-type>standard</list-type>

</config>

<list-type>standard</list-type>

<action-values>

<action-value>

<community-value-standard>AA:NN</community-value-standard>

<community-value-standard>WORD</community-value-standard>

<action-name-standard>deny</action-name-standard>

</config>

<action-name-standard>deny</action-name-standard>

</action-value>

</action-values>

</standard>

</standards>

</community-lists>

</global>

</bgp>

Command Syntax

Configure action expanded

Community list extended type

Attribute Name: action-expanded

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

<regular-expression-list>LINE</regular-expression-list>

<regular-expression-list>LINE</regular-expression-list>

<action-expanded>deny</action-expanded>

</config>

<action-expanded>deny</action-expanded>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</community-lists>

</global>

</bgp>

Command Syntax

ip community-list <100-500> (deny|permit) LINE

Configure expanded type

Community list extended type

Attribute Name: action-expanded

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

<regular-expression-list>LINE</regular-expression-list>

<regular-expression-list>LINE</regular-expression-list>

<action-expanded>deny</action-expanded>

</config>

<action-expanded>deny</action-expanded>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</community-lists>

</global>

</bgp>

Command Syntax

ip community-list (expanded) WORD (deny|permit) LINE

Configure extended action number

Extended Community list type

Attribute Name: extended-action-number

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<extended-community>

<numbered-lists>

<numbered-list>

<standard-number>1</standard-number>

<standard-number>1</standard-number>

</config>

<action-values>

<action-value>

<extended-value>AA:NN</extended-value>

<extended-value>WORD</extended-value>

<extended-route-target-soo>rt</extended-route-target-soo>

<extended-action-number>deny</extended-action-number>

</config>

<extended-route-target-soo>rt</extended-route-target-soo>

<extended-action-number>deny</extended-action-number>

</action-value>

</action-values>

</numbered-list>

</numbered-lists>

</extended-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip extcommunity-list <1-99> (deny|permit) (rt|soo) AA:NN

Configure extended action

extcommunity Community list type

Attribute Name: extended-action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<extended-community>

</config>

<action-values>

<action-value>

<route-target-soo>rt</route-target-soo>

<extended-action>deny</extended-action>

</config>

<route-target-soo>rt</route-target-soo>

<extended-action>deny</extended-action>

</action-value>

</action-values>

</standard>

</standards>

</extended-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip extcommunity-list standard WORD (deny|permit) (rt|soo) AA:NN

Configure action

extcommunity Extended Community type

Attribute Name: action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<extended-community>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

</config>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</extended-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip extcommunity-list <100-500> (deny|permit) LINE

Configure value

extcommunity Extended Community type

Attribute Name: action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<extended-community>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

</config>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</extended-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip extcommunity-list (expanded) WORD (deny|permit) LINE

Configure large action number

Large Community list type

Attribute Name: large-action-number

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<large-community>

<numbered-lists>

<numbered-list>

<standard-number>1</standard-number>

<standard-number>1</standard-number>

</config>

<action-values>

<action-value>

<large-value>LINE</large-value>

<large-value>LINE</large-value>

<large-action-number>deny</large-action-number>

</config>

<large-action-number>deny</large-action-number>

</action-value>

</action-values>

</numbered-list>

</numbered-lists>

</large-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip large-community-list <1-99> (deny|permit) [AAaa:NNnn:ZZzz]

Configure standard type

large-community Large Community type

Attribute Name: action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<large-community>

<standard-lists>

<standard-list>

<standard-type>BGP_STANDARD_LIST_TYPE_T</standard-type>

<standard-type>BGP_STANDARD_LIST_TYPE_T</standard-type>

<list-type>standard</list-type>

</config>

<list-type>standard</list-type>

<action-values>

<action-value>

</config>

</action-value>

</action-values>

</standard-list>

</standard-lists>

</large-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip large-community-list (standard) WORD (deny|permit) [AAaa:NNnn:ZZzz]

Configure action-values action

large-community Large Community type

Attribute Name: action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<large-community>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

</config>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</large-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip large-community-list <100-500> (deny|permit) LINE

Configure action-values action

large-community Large Community type

Attribute Name: action

Attribute Type: enum (deny|permit)

Netconf edit-config payload

<community-lists>

<large-community>

<expanded-lists>

<expanded-list>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<expanded-type>BGP_EXPANDED_LIST_TYPE_T</expanded-type>

<list-type>expanded</list-type>

</config>

<list-type>expanded</list-type>

<action-values>

<action-value>

</config>

</action-value>

</action-values>

</expanded-list>

</expanded-lists>

</large-community>

</community-lists>

</global>

</bgp>

Command Syntax

ip large-community-list (expanded) WORD (deny|permit) LINE

Configure access list name

Use this attribute to define a BGP Autonomous System (AS) path access list. A named community list is a filter based on regular expressions. If the regular expression matches the specified string representing the AS path of the route, then the permit or deny condition applies. Use this attribute to define the BGP access list globally.

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<as-path-access-lists>

<as-path-access-list>

<access-list-regular-expression>LINE</access-list-regular-expression>

<access-list-regular-expression>LINE</access-list-regular-expression>

<access-list-action>deny</access-list-action>

<access-list-name>WORD</access-list-name>

</config>

<access-list-action>deny</access-list-action>

<access-list-name>WORD</access-list-name>

</as-path-access-list>

</as-path-access-lists>

</global>

</bgp>

Command Syntax

ip as-path access-list WORD (deny|permit) LINE

Configure options

Use this attribute to enable all BGP troubleshooting functions. Use this attribute without any parameters to turn on normal bgp debug information.

Attribute Name: options

Netconf edit-config payload

<debug>

</config>

</debug>

</global>

</bgp>

Command Syntax

restart bgp graceful

Netconf RPC payload

<bgp-graceful-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp"/>

Command Syntax

restart bgp graceful

clear bgp statistics

Netconf RPC payload

<clear-bgp-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp"/>

Command Syntax

clear bgp statistics

snmp restart bgp

Netconf RPC payload

<bgp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp"/>

Command Syntax

snmp restart bgp

Attribute Name: terminal-debug-options

Netconf RPC payload

<bgp-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<terminal-debug-options>all</terminal-debug-options>

</bgp-debug-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<bgp-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<terminal-debug-options>all</terminal-debug-options>

</bgp-debug-off>

Command Syntax

no debug all bgp

Netconf RPC payload

<bgp-all-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp"/>

Command Syntax

no debug all bgp

IPI-BGP-INSTANCE

Configure no external fail over

Use this attribute to reset a BGP session immediately, if the interface used for BGP connection goes down.

Attribute Name: no-external-fail-over

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</no-external-fail-over>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp fast-external-failover

Configure no best path tie break

Use this attribute to always select a preferred older route even when the bestpathCompareRouterId attribute is configured

Attribute Name: no-best-path-tie-break

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</no-best-path-tie-break>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp bestpath tie-break-on-age

Configure inbound route filter disable

Use this attribute to enable the MPLS (Multiprotocol Label Switching) VPN/BGP inbound route filter. This attribute is used to control the installation of routing information into the BGP table. When a router runs MPLS VPN/BGP PE, it exchanges routing information with a routing distinguisher. By default, routing information that does not match the configured routing distinguisher value is not installed. When the local box has two VRFs where each routing distinguisher value is 10:100 and 20:200, routing information with routing distinguisher 10:200 is not installed into BGP table.

Attribute Name: inbound-route-filter-disable

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</inbound-route-filter-disable>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp inbound-route-filter

Configure external route leak disable

Use this attribute to disable external route leak.

Attribute Name: external-route-leak-disable

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</external-route-leak-disable>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp external-route-leak

Configure no client route reflection

Use this attribute to configure routers as route reflectors. Route reflectors are used when all Interior Border Gateway Protocol (iBGP) speakers are not fully meshed. If the clients are fully meshed the route reflector is not required

Attribute Name: no-client-route-reflection

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</no-client-route-reflection>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp client-to-client reflection

Configure med type

Use this attribute to specify two MED (Multi Exit Discriminator) attributes, confed and missing-as-worst. The confed attribute enables MED comparison along paths learned from confederation peers. The MEDs are compared only if there is no external Autonomous System (an AS not within the confederation) in the path. If there is an external autonomous system in the path, the MED comparison is not made. The missing-as-worst to consider a missing MED attribute in a path as having a value of infinity, making the path without a MED value the least desirable path. If missing-as-worst is disabled, the missing MED is assigned the value of 0,making the path with the missing MED attribute the best path.

Attribute Name: med-type

Attribute Type: bits (confed|missing-as-worst|remove-recv-med|remove-send-med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<med-type>3</med-type>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath med (confed) missing-as-worst

Configure bgp as

Attribute Name: med-type

Attribute Type: bits (confed|missing-as-worst|remove-recv-med|remove-send-med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<med-type>3</med-type>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath med (missing-as-worst) confed

Configure bgp-instances bgp-as

Use this attribute to start a BGP process.

Attribute Name: bgp-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

router bgp <1-4294967295>

Configure router id

Use this attribute to manually configure a fixed router ID as a BGP router identifier. When this attribute is used to configure a fixed router ID, the current router identifier is overridden and the peers are reset.

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<router-id>A.B.C.D</router-id>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp router-id A.B.C.D

Configure cluster id

Use this attribute to configure the cluster ID if the BGP cluster has more than one route reflector. A cluster includes route reflectors and its clients. Usually, each cluster is identified by the router ID of its single route reflector but to increase redundancy sometimes a cluster may have more than one route reflector. All router reflectors in such a cluster are then identified by a cluster ID. The clusterId attribute is used to configure the 4 byte cluster ID for clusters with more than one route reflectors in an IPv4 address format.

Attribute Name: cluster-id

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<cluster-id>BGP_CLUSTER_ID_T</cluster-id>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp cluster-id (A.B.C.D|<1-4294967295>)

Configure local preference

Use this attribute to change the default local preference value. Local preference indicates the preferred path when there are multiple paths to the same destination. The path having a higher preference is preferred. The preference is sent to all routers and access servers in the local autonomous system.

Attribute Name: local-preference

Attribute Type: uint32

Default Value: 100

Attribute Range: 0-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<local-preference>0</local-preference>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp default local-preference <0-4294967295>

Configure graceful shutdown capable

Use this attribute to enable the graceful shutdown capability at the router level and make available the graceful-shutdown related attributes at the router and BGP neighbor levels.

Attribute Name: graceful-shutdown-capable

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</graceful-shutdown-capable>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut-capable

Configure graceful shutdown

Use this attribute to gracefully shut down all BGP IPv4 sessions under this router. The BGP graceful shutdown feature reduces packet loss during maintenance activity.

Attribute Name: graceful-shutdown

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</graceful-shutdown>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut

Configure graceful shutdown local preference

Use this attribute to set the local preference of the router to use during graceful shutdown. The local preference value indicates the preferred path when there are multiple paths to the same destination in a single routing database. The path with a higher preference value is the preferred one. The preferred path is sent to all routers and access servers in the local autonomous system.

Attribute Name: graceful-shutdown-local-preference

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-shutdown-local-preference>0</graceful-shutdown-local-preference>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut-local-preference <0-4294967295>

Configure log neighbor changes

Use this attribute to enable logging of status change messages without turning on debug bgp attributes. Product has many logging services for neighbor status, including debug bgp fsm and debug bgp events. However, these attributes cause system performance degradation. If you need to log neighbor status changes only, IP Infusion Inc. recommends turning off all debug attributes and using the setLogNbrChanges attribute instead.

Attribute Name: log-neighbor-changes

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</log-neighbor-changes>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp log-neighbor-changes

Configure scan interval

Use this attribute to configure scanning intervals of BGP routers. This interval is the period after which router checks the validity of the routes in its database. To disable BGP scanning, set the scan-time interval to 0 seconds.

Attribute Name: scan-interval

Attribute Type: uint32

Default Value: 60

Attribute Range: 0-60

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<scan-interval>0</scan-interval>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp scan-time <0-60>

Configure best path dont compare originator

Use this attribute to change the default bestpath selection by not comparing an originator-ID for an identical EBGP path

Attribute Name: best-path-dont-compare-originator

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</best-path-dont-compare-originator>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath dont-compare-originator-id

Configure enable deterministic med

Use this attribute to compare the Multi Exit Discriminator (MED) variable when choosing among routes advertised by different peers in the same autonomous system. MED is compared after BGP attributes weight, local preference, AS-path and origin have been compared and are equal. For a correct comparison result, enable this attribute on all routers in a local AS. After enabling this attribute, all paths for the same prefix are grouped together and arranged according to their MED value. Based on this comparison, the best path is then chosen. This attribute compares MED variable when choosing routes advertised by different peers in the same AS, to compare MED, when choosing routes from neighbors in different ASs use the compareMed attribute. When the deterministicMed attribute is set, routes from the same AS are grouped together, and the best routes of each group are compared.

Attribute Name: enable-deterministic-med

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</enable-deterministic-med>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp deterministic-med

Configure enforce first as for ebgp

Use this attribute to enforce the first AS for eBGP routes. This attribute specifies that any updates received from an external neighbor that do not have the neighbors configured Autonomous System (AS) at the beginning of the AS_PATH in the received update must be denied. Enabling this feature adds to the security of the BGP network by not allowing traffic from unauthorized systems.

Attribute Name: enforce-first-as-for-ebgp

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</enforce-first-as-for-ebgp>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp enforce-first-as

Configure local as count

Use this attribute to set the number of times the local-AS (Autonomous System) is to be prepended.

Attribute Name: local-as-count

Attribute Type: uint8

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<local-as-count>2</local-as-count>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp as-local-count <2-64>

Configure bgp-instance med-type

Attribute Name: med-type

Attribute Type: bits (confed|missing-as-worst|remove-recv-med|remove-send-med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<med-type>confed</med-type>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath med (confed|missing-as-worst|remove-recv-med|remove-send-med)

Configure multi path relax

Use this attribute to relax the same AS-Path requirement so any candidate eBGP AS-Path with the same AS-path length might be used for eBGP load-balancing. This feature does not load-balance between eBGP and iBGP paths. Normally eBGP load-balancing requires the candidate routes to be equal-cost paths with identical BGP attributes having the same weight, Local-Pref, AS-Path (both the AS numbers and the AS pathlength), origin, MED, and different next-hop.

Attribute Name: multi-path-relax

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</multi-path-relax>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath as-path multipath-relax

Configure ignore aigp for bestpath

Use this config to ignore aigp attr in BGP best-path selection alogorithm.

Attribute Name: ignore-aigp-for-bestpath

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</ignore-aigp-for-bestpath>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath aigp ignore

Configure auto policy soft reset

Enable automatic soft-reset of BGP peers when their configured route policy is modified

Attribute Name: auto-policy-soft-reset

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</auto-policy-soft-reset>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp auto-policy-soft-reset enable

Configure identifier

Use this attribute to specify a BGP confederation identifier

Attribute Name: identifier

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

</config>

</confederation>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp confederation identifier <1-4294967295>

Configure peer as number

Use this attribute to specify peer AS number in BGP confederation

Attribute Name: peer-as-number

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-as-number>1</peer-as-number>

</config>

</confederation>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp confederation peers .<1-4294967295>

Configure confed vrf name

Use this attribute to specify a BGP confederation vrf identifier

Attribute Name: identifier

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<confederation-vrfs>

<confederation-vrf>

<confed-vrf-name>NAME</confed-vrf-name>

<confed-vrf-name>WORD</confed-vrf-name>

</config>

</confederation-vrf>

</confederation-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp confederation vrf NAME identifier <1-4294967295>

Configure confederation-vrf peer-as-number

Use this attribute to specify peer AS number in BGP confederation vrf

Attribute Name: peer-as-number

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<confederation-vrfs>

<confederation-vrf>

<confed-vrf-name>NAME</confed-vrf-name>

<confed-vrf-name>WORD</confed-vrf-name>

</config>

<peer-as-number>1</peer-as-number>

</confederation-vrf>

</confederation-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp confederation vrf NAME peers .<1-4294967295>

Configure enable graceful restart

Use this attribute to enable BGP graceful-restart capabilities. The restart-time parameter is used for setting the maximum time that a graceful-restart neighbor waits to come back up after a restart. This value is applied to all neighbors unless you explicitly override it by configuring the corresponding value on the neighbor. The stalepath-time parameter is used to set the maximum time to preserve stale paths from a gracefully restarted neighbor. All stalepaths, unless reinstated by the neighbor after a re-establishment, will be deleted at the expiration of this timer.

Attribute Name: enable-graceful-restart

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-restart>

</enable-graceful-restart>

</config>

</graceful-restart>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp graceful-restart

Configure restart time

Attribute Name: restart-time

Attribute Type: uint32

Default Value: 90

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-restart>

<restart-time>1</restart-time>

</config>

</graceful-restart>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp graceful-restart restart-time <1-3600>

Configure stale path max retention time

Use this attribute to enable BGP graceful-restart capabilities. The stalepath-time parameter is used to set the maximum time to preserve stale paths from a gracefully restarted neighbor. All stalepaths, unless reinstated by the neighbor after a re-establishment, will be deleted at the expiration of this timer.

Attribute Name: stale-path-max-retention-time

Attribute Type: uint32

Default Value: 360

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-restart>

<stale-path-max-retention-time>1</stale-path-max-retention-time>

</config>

</graceful-restart>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp graceful-restart stalepath-time <1-3600>

Configure route selection max defer time

Use this attribute to specify the update-delay value for a graceful-restart capable router. The update-delay value is the maximum time a graceful-restart capable router, which is restarting, will defer route-selection and advertisements to all its graceful-restart capable neighbors. This maximum time starts from the instance the first neighbor attains established state after restart. The restarting router prematurely terminates this timer when end-of-rib markers are received from all its graceful-restart capable neighbors.

Attribute Name: route-selection-max-defer-time

Attribute Type: uint32

Default Value: 120

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-restart>

<route-selection-max-defer-time>1</route-selection-max-defer-time>

</config>

</graceful-restart>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp update-delay <1-3600>

Configure graceful reset

Attribute Name: graceful-reset

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<graceful-restart>

</graceful-reset>

</config>

</graceful-restart>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp graceful-restart graceful-reset

Configure keep alive

Use this attribute to globally set or reset the keepalive values for all the neighbors

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<hold-time>0</hold-time>

<keep-alive>0</keep-alive>

</config>

</timers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

timers bgp <0-65535> <0-65535>

Configure always compare med

Use this attribute to compare the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems. Multi Exit Discriminator (MED) is used in best path selection by BGP. MED is compared after BGP attributes weight, local preference, AS-path and origin have been compared and are equal. MED comparison is done only among paths from the same autonomous system (AS). Use compareMed attribute to allow comparison of MEDs from different ASs. The MED parameter is used to select the best path. A path with lower MED is preferred.

Attribute Name: always-compare-med

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<route-selection>

</always-compare-med>

</config>

</route-selection>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp always-compare-med

Configure ignore as path length

Use this attribute to prevent the router from considering the autonomous system (AS) path length as a factor in the algorithm for choosing a best path route.

Attribute Name: ignore-as-path-length

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<route-selection>

</ignore-as-path-length>

</config>

</route-selection>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath as-path ignore

Configure best path compare confed

Use this attribute to allow comparing of the confederation AS path length. This attribute specifies that the AS confederation path length must be used when available in the BGP best path decision process. It is effective only when bestpathAspath attribute has not been used.

Attribute Name: best-path-compare-confed

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<route-selection>

</best-path-compare-confed>

</config>

</route-selection>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath compare-confed-aspath

Configure external compare router id

Use this attribute to compare router IDs for identical eBGP paths. When comparing similar routes from peers, the BGP router does not consider the router ID of the routes. By default, it selects the first received route. Use this attribute to include router ID in the selection process; similar routes are compared and the route with the lowest router ID is selected. The router IS is the highest IP address on the router, with preference given to loopback addresses. Router ID can be manually set by using the routerIpAddr attribute.

Attribute Name: external-compare-router-id

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<route-selection>

</external-compare-router-id>

</config>

</route-selection>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath compare-routerid

Configure source ip prefix

Use this attribute to set the administrative distance for ip source prefix.

Attribute Name: source-ip-prefix

Attribute Type: string

Attribute Name: distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<administrative-distances>

<administrative-distance>

<source-ip-prefix>A.B.C.D/M</source-ip-prefix>

<source-ip-prefix>A.B.C.D/M</source-ip-prefix>

</config>

</administrative-distance>

</administrative-distances>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

distance <1-255> A.B.C.D/M

Configure access list name

Use this attribute to define an administrative distance along with ip source prefix and access list name.

Attribute Name: access-list-name

Attribute Type: string

Attribute Name: distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<administrative-distances>

<administrative-distance>

<source-ip-prefix>A.B.C.D/M</source-ip-prefix>

<source-ip-prefix>A.B.C.D/M</source-ip-prefix>

</config>

<access-list-name>WORD</access-list-name>

</administrative-distance>

</administrative-distances>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

distance <1-255> A.B.C.D/M WORD

IPI-BGP-ADDRESS-FAMILY

Configure additional paths mode

Use this attribute to add additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-mode>send-receive</additional-paths-mode>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths (send-receive|receive|send)

Configure additional path select all

Use this attribute to select criteria to pick the paths

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</additional-path-select-all>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths select all

Configure additional paths best select count

Use this attribute to select best N paths

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths select best <2-3>

Configure no client route reflection

Attribute Name: no-client-route-reflection

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</no-client-route-reflection>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no bgp client-to-client reflection

Configure enable auto summary

Use this attribute to enable sending summarized routes by a BGP speaker to its peers. Auto-summary is used by a BGP router to advertise summarized routes to its peers. Auto-summary can be enabled if certain routes have already been advertised: in this case, configuring auto-summary advertises the summarized routes first, then corresponding non-summarized routes are withdrawn. If certain routes have already been advertised, and auto-summary is disabled, non-summarized routes are first advertised, then the corresponding summarized routes are withdrawn from all the connected peers.

Attribute Name: enable-auto-summary

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</enable-auto-summary>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

auto-summary

Configure enable network igp sync

Use this attribute to enable IGP synchronization for BGP static network routes

Attribute Name: enable-network-igp-sync

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</enable-network-igp-sync>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network synchronization

Configure multi path

Use this attribute to enable L3VPN multipath for ECMP

Attribute Name: multi-path

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</multi-path>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

multi-path

Configure enable igp sync

Use this attribute to enable IGP synchronization of Internal BGP (iBGP) learned routes with the Internal Gateway Protocol (IGP) system. Synchronization is used when a BGP router should not advertise routes learned from iBGP neighbors, unless those routes are also present in an IGP (for example, OSPF). Synchronization may be enabled when all the routers in an autonomous system do not speak BGP, and the autonomous system is a transit for other autonomous systems.

Attribute Name: enable-igp-sync

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</enable-igp-sync>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

synchronization

Configure backdoor

network address with backdoor for address family

Attribute Name: backdoor

Attribute Type: uint8

Attribute Name: network-rmap-name

Attribute Type: string

Default Value: NULL

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<network-lists>

<network-list>

<local-network-prefix>A.B.C.D</local-network-prefix>

<local-network-prefix>BGP_IP_NETWORK_T</local-network-prefix>

<network-rmap-name>WORD</network-rmap-name>

</config>

</backdoor>

</network-list>

</network-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network (A.B.C.D | A.B.C.D/M) (route-map WORD|) (backdoor|)

Configure bgp as

network address with backdoor for address family

Attribute Name: backdoor

Attribute Type: uint8

Attribute Name: network-rmap-name

Attribute Type: string

Default Value: NULL

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<network-lists>

<network-list>

<local-network-prefix>A.B.C.D</local-network-prefix>

<local-network-prefix>BGP_IP_NETWORK_T</local-network-prefix>

<network-rmap-name>WORD</network-rmap-name>

</config>

</backdoor>

</network-list>

</network-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network (X:X::X:X/M) (route-map WORD|) (backdoor|)

Configure aggregate address

Aggregates are used to minimize the size of routing tables. Aggregation combines the characteristics of several different routes and advertises a single route.The aggregate-address attribute creates an aggregate entry in the BGP routing table if any more-specific BGP routes are available in the specified range.

Attribute Name: aggregate-address

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

</aggregate-address-list>

</aggregate-address-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address (A.B.C.D/M|A.B.C.D A.B.C.D|X:X::X:X/M)

Configure aggregate type

The aggregate-type attribute creates an aggregate entry advertising the path for this route, consisting of all elements contained in all paths being summarized. Use this parameter to reduce the size of path information by listing the AS number only once, even if it was included in multiple paths that were aggregated.

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>1</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address as-set

Configure afi

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>2</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address summary-only

Configure safi

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>3</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address as-set summary-only

Configure aggregate-address-list aggregate-type

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>3</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address summary-only as-set

Configure local

Use this attribute to define an administrative distance for local routes. Local routes are routes that is redistributed from another process.A distance is a rating of trustworthiness of a router. The higher the distance the lower the trust rating. If the administrative distance is changed, it could create inconsistency in the routing table and obstruct routing.

Attribute Name: local

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</config>

</distance>

</distances>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

distance bgp <1-255> <1-255> <1-255>

Configure ebgp max path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for eBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path

Attribute Name: ebgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-paths>

<ebgp-max-path>2</ebgp-max-path>

</config>

</maximum-paths>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ebgp <2-64>

Configure maximum-paths ebgp-max-path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for eBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path

Attribute Name: ebgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-paths>

<ebgp-max-path>2</ebgp-max-path>

</config>

</maximum-paths>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ebgp <2-64>

Configure ibgp max path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for iBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path.

Attribute Name: ibgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-paths>

<ibgp-max-path>2</ibgp-max-path>

</config>

</maximum-paths>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ibgp <2-64>

Configure maximum-paths ibgp-max-path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for iBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path.

Attribute Name: ibgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-paths>

<ibgp-max-path>2</ibgp-max-path>

</config>

</maximum-paths>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ibgp <2-64>

Configure eibgp max path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for eiBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path

Attribute Name: eibgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-paths>

<eibgp-max-path>2</eibgp-max-path>

</config>

</maximum-paths>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths eibgp <2-64>

Configure map name

Use this attribute to enable or disable suppression/modification of incoming BGP updates to IP RIB/FIB table installation. In a dedicated route reflector, all the routes it receives may not be required to be stored or only few selected routes need to be stored, because it may not lie in the data path. Table maps are particularly useful to attain this restriction. When map-name attribute is set, the route map referenced in the map-name attribute shall be used to set certain properties (such as the traffic index) of the routes for installation into the RIB. The route is always downloaded, regardless of whether it is permitted or denied by the route map.

This command is supported when following feature are enabled bgp table map feature enabled

Attribute Name: map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<table-map>

<map-name>WORD</map-name>

</config>

</table-map>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

table-map WORD

Configure table map filter

When tableMapFilter attribute is given in the table map attribute, the route map referenced is used to control whether a BGP route is to be downloaded to the IP RIB (hence the filter). A BGP route is not downloaded to the RIB if it is denied by the route map.

This command is supported when following feature are enabled bgp table map feature enabled

Attribute Name: table-map-filter

Attribute Type: boolean

Attribute Name: map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<table-map>

<map-name>WORD</map-name>

<table-map-filter>true</table-map-filter>

</config>

</table-map>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

table-map WORD filter

Configure enable dampening

This attribute enable BGP route dampening and set various parameters to default values.

Attribute Name: enable-dampening

Attribute Type: enum (enable-dampening)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening

Configure route-flap-dampenings enable-dampening

This attribute enable BGP route dampening and set various parameters to default values.

Attribute Name: enable-dampening

Attribute Type: enum (enable-dampening)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening

Configure reach half life

Use this attribute to configure reachability half-life time for the penalty in minutes for the bgp route dampening. The time for the penalty to decrease to one-half of its current value.

Attribute Name: reach-half-life

Attribute Type: uint32

Default Value: 15

Attribute Range: 1-45

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<reach-half-life>1</reach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45>

Configure route-flap-dampening reach-half-life

Use this attribute to configure reachability half-life time for the penalty in minutes for the bgp route dampening. The time for the penalty to decrease to one-half of its current value.

Attribute Name: reach-half-life

Attribute Type: uint32

Default Value: 15

Attribute Range: 1-45

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<reach-half-life>1</reach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45>

Configure max suppress time

Use this attribute to configure the value to start suppressing a route for BGP route dampening. When the penalty for a route exceeds the suppress value, the route is suppressed

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

</config>

<max-suppress-time>1</max-suppress-time>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255>

Configure reuse penalty

Use this attribute to configure the value to start suppressing a route for BGP route dampening. When the penalty for a route exceeds the suppress value, the route is suppressed

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

</config>

<max-suppress-time>1</max-suppress-time>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255>

Configure unreach half life

Use this attribute to configure un-reachability half-life time for the penalty in minutes for bgp route dampening. The dampening information is purged from the router once the penalty becomes less than half of the reuse limit.

Attribute Name: unreach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

<max-suppress-time>1</max-suppress-time>

</config>

<unreach-half-life>1</unreach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255> <1-45>

Configure suppress penalty

Attribute Name: unreach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

<max-suppress-time>1</max-suppress-time>

</config>

<unreach-half-life>1</unreach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255> <1-45>

Configure dampening rmap name

Use this attribute to configure route map to specify criteria for dampening.

Attribute Name: dampening-rmap-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<dampening-rmap-name>WORD</dampening-rmap-name>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening route-map WORD

Configure route-flap-dampening dampening-rmap-name

Use this attribute to configure route map to specify criteria for dampening.

Attribute Name: dampening-rmap-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<dampening-rmap-name>WORD</dampening-rmap-name>

</route-flap-dampening>

</route-flap-dampenings>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening route-map WORD

Configure protocol type

Use this attribute to inject routes from one routing process into another. Redistribution is used by routing protocols to advertise routes that are learned by some other means, such as by another routing protocol or by static routes. Since all internal routes are dumped into BGP, careful filtering is applied to make sure that only routes to be advertised reach the internet, not everything. This attribute allows redistribution by injecting prefixes from one routing protocol into another routing protocol.

Attribute Name: protocol-type

Attribute Name: redist-route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-redistribute-lists>

<route-redistribute-list>

<protocol-type>connected</protocol-type>

<protocol-type>connected</protocol-type>

<redist-route-map-name>WORD</redist-route-map-name>

</config>

</route-redistribute-list>

</route-redistribute-lists>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

Configure afi

Use this attribute to start a BGP process.

Attribute Name: bgp-as

Attribute Type: uint32

Attribute Name: afi

Attribute Name: safi

Attribute Name: ospf-instance-number

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<bgp-redistributes-ospf>

<bgp-redistribute-ospf>

<ospf-instance-number>""</ospf-instance-number>

</bgp-redistribute-ospf>

</bgp-redistributes-ospf>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

redistribute (ospf) (WORD|<1-65535>)

Configure redistribute ospf route map

Use this attribute to specify route map to redistribute routes from OSPF into BGP.

Attribute Name: redistribute-ospf-route-map

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<bgp-redistributes-ospf>

<bgp-redistribute-ospf>

<ospf-instance-number>""</ospf-instance-number>

<ospf-instance-number>""</ospf-instance-number>

</config>

<redistribute-ospf-route-map>WORD</redistribute-ospf-route-map>

</bgp-redistribute-ospf>

</bgp-redistributes-ospf>

</address-family>

</address-families>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

redistribute (ospf) route-map WORD

clear ip bgp (A.B.C.D|X:X::X:X|WORD) (description LINE|)

Attribute Name: arg

Attribute Type: union

Attribute Name: peer-reset-description

Attribute Type: string

Attribute Range: 1-255

Netconf RPC payload

<ipi-bgp-address-family_clear-ip-bgp-peer xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<peer-reset-description>1</peer-reset-description>

</ipi-bgp-address-family_clear-ip-bgp-peer>

Command Syntax

clear ip bgp (A.B.C.D|X:X::X:X|WORD) (description LINE|)

IPI-BGP-PEER-GROUP

Configure peer group tag

Creates a peer-group group. Neighbors with the same update policies are grouped into peer-group groups. This facilitates the updates of various policies, such as distribute and filter lists. The peer-group group is then configured easily with any of the neighbor attributes. Any changes made to the peer-group group affect all members.

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-range>0</peer-group-range>

</config>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group

Configure bgp as

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-range>A.B.C.D/M</peer-group-range>

</config>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group range A.B.C.D/M

Configure peer group range

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-range>X:X::X:X/M</peer-group-range>

</config>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group range X:X::X:X/M

Configure group limit

This attribute specifies maximum number of peer-groups in a dynamic peer-group

Attribute Name: group-limit

Attribute Type: uint16

Attribute Range: 1-512

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<group-limit>1</group-limit>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD limit <1-512>

Configure enable peer bfd

Enable bidirectional forwarding detection (BFD) for the BGP peer-group

Attribute Name: enable-peer-bfd

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-peer-bfd>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd

Configure enable peer bfd multihop

Enable bidirectional forwarding detection (BFD) for the BGP peer-group with multihop

Attribute Name: enable-peer-bfd-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-peer-bfd-multihop>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd multihop

Configure peer as

Autonomous system number of a neighbor. If the specified ASN matches the ASN number specified in the router bgp global configuration, the neighbor is identified as internal. If the ASN does no match, it is identified as external to the local AS.

Attribute Name: peer-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-as>1</peer-as>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remote-as <1-4294967295>

Configure graceful shut

Use this attribute to start a graceful shutdown for the BGP session of the specified BGP neighbor. The BGP session for this neighbor is shut down after the graceful shutdown timer expires. If there is no alternate path available for traffic to flow prior the actual shutdown of the BGP session, this path is made available for 60 seconds or for configured time after which the path is no longer available and traffic is dropped.

Attribute Name: graceful-shut

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</graceful-shut>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut

Configure graceful shutdown timer

Configure the value of the graceful shutdown timer. After the timer expires, the BGP session initiated for graceful shutdown is shut down.

Attribute Name: graceful-shutdown-timer

Attribute Type: uint32

Attribute Range: 10-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<graceful-shutdown-timer>10</graceful-shutdown-timer>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut-timer <10-65535>

Configure peer restart time

Sets a different restart-time other than the global restart-time. This attribute takes precedence over the restart-time value specified using the grstSet attribute. The restart-time value is the maximum time that a graceful-restart neighbor waits to come back up after a restart. The default value is 120 seconds.

Attribute Name: peer-restart-time

Attribute Type: uint32

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-restart-time>1</peer-restart-time>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD restart-time <1-3600>

Configure peer description

Associates a description with a neighbor. This helps in identifying a neighbor quickly. It is useful for an ISP that has multiple neighbor relationships.

Attribute Name: peer-description

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-description>LINE</peer-description>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD description LINE

Configure peer connect interval

This attribute sets the timers for a specific BGP neighbor. Keepalive messages are sent by a router to inform another router that the BGP connection between the two is still active. The keepalive interval is the period of time between each keepalive message sent by the router. The holdtime interval is the time the router waits to receive a keepalive message and if it does not receive a message for this period it declares the neighbor dead.

Attribute Name: peer-connect-interval

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-connect-interval>1</peer-connect-interval>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers connect <1-65535>

Configure peer as origin interval

Configures the minimum interval between the sending of AS-origination routing updates.

Attribute Name: peer-as-origin-interval

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-as-origin-interval>1</peer-as-origin-interval>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD as-origination-interval <1-65535>

Configure min route advertisement interval

Sets a minimum route advertisement interval between the sending of BGP routing updates. To reduce the flapping of routes to internet, a minimum advertisement interval is set, so that the BGP routing updates are sent only per interval seconds.

Attribute Name: min-route-advertisement-interval

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<min-route-advertisement-interval>0</min-route-advertisement-interval>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertisement-interval <0-65535>

Configure enable dynamic capability

Use this attribute to enable the dynamic capability for a specific peer-group. This attribute allows a BGP speaker to advertise or withdraw an address family capability to a peer-group in a non-disruptive manner.

Attribute Name: enable-dynamic-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-dynamic-capability>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability dynamic

Configure collide established

Include a neighbor already in an established state for conflict resolution when a TCP connection collision is detected.

Attribute Name: collide-established

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</collide-established>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD collide-established

Configure source identifier

Allows internal BGP sessions to use any operational interface for TCP connections. This attribute can be used in conjunction with any specified interface on the router. The loopback interface is the interface that is most commonly used with this attribute. The use of loopback interface eliminates a dependency and BGP does not have to rely on the availability of a particular interface for making TCP connections.

Attribute Name: source-identifier

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<source-identifier>WORD</source-identifier>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD update-source WORD

Configure enforce multi hop

Turns on the enforcement of eBGP neighbors perform multihop.

Attribute Name: enforce-multi-hop

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enforce-multi-hop>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD enforce-multihop

Configure neighbor override capability

Override a capability negotiation result and use locally configured values.

Attribute Name: neighbor-override-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</neighbor-override-capability>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD override-capability

Configure neighbor strict capability match

Close the BGP connection if capability value does not match the remote peer-group.

Attribute Name: neighbor-strict-capability-match

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</neighbor-strict-capability-match>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD strict-capability-match

Configure disallow infinite hold time

Disallow configuration of infinite hold-time. A hold-time of 0 seconds from the peer-group (during exchange of open messages) or the user (during configuration) will be rejected.

Attribute Name: disallow-infinite-hold-time

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</disallow-infinite-hold-time>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD disallow-infinite-holdtime

Configure disable capability negotiation

Disable the capability negotiation. It allows compatibility with older BGP versions that have no capability parameters used in open messages between peer-groups.

Attribute Name: disable-capability-negotiation

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</disable-capability-negotiation>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD dont-capability-negotiate

Configure neighbor passive

Sets a BGP neighbor as passive.

Attribute Name: neighbor-passive

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</neighbor-passive>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD passive

Configure peer shutdown description

Use this attribute to send shutdown communication message to inform peer the reason for the shutdown of the BGP session.

Attribute Name: peer-shutdown-description

Attribute Type: string

Attribute Range: 1-255

Attribute Name: peer-shutdown

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</peer-shutdown>

</config>

<peer-shutdown-description>1</peer-shutdown-description>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD shutdown (description LINE|)

Configure peer port

Sets the BGP port number of a neighbor.

Attribute Name: peer-port

Attribute Type: uint16

Default Value: 179

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-port>0</peer-port>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD port <0-65535>

Configure bgp version

Configure router to accept only a particular BGP version. By default, the system uses BGP version 4 and on request dynamically negotiates down to version 2. Disables the routers version-negotiation capability and forces the router to use only a specified version with the neighbor.

Attribute Name: bgp-version

Attribute Type: uint8

Default Value: 4

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-version>(4)</bgp-version>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD version (4)

Configure enable ext opt param len

Use this attribute for a specific peer to encode extended optional parameter length.

Attribute Name: enable-ext-opt-param-len

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-ext-opt-param-len>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD extended-optional-param

Configure tcp adjust mss

Use this attribute to set the BGP TCP MSS value of a neighbor.

Attribute Name: tcp-adjust-mss

Attribute Type: uint16

Attribute Range: 40-1440

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<tcp-adjust-mss>40</tcp-adjust-mss>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD tcp-mss <40-1440>

Configure keep alive

Use this attribute to globally set or reset the keepalive values for all the neighbors

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<hold-time>0</hold-time>

<keep-alive>0</keep-alive>

</config>

</timers>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers <0-65535> <0-65535>

Configure enabled

Use this attribute to accept and attempt BGP connections to external peers on indirectly connected networks. Multihop is not established if the only route to the multihop peer is a default route. This avoids loop formation.

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<ebgp-multihop>

</enabled>

</config>

</ebgp-multihop>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop

Configure maximum hop count

Attribute Name: enabled

Attribute Type: empty

Attribute Name: maximum-hop-count

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<ebgp-multihop>

<maximum-hop-count>1</maximum-hop-count>

</enabled>

</config>

</ebgp-multihop>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop <1-255>

Configure auth key encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>1</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key (0|1) WORD

Configure password

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>2</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key WORD

Configure optional as

Use this attribute to specify optional AS number of BGP dynamic peer-group

Attribute Name: optional-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<optional-as-lists>

<optional-as-list>

<optional-as>1</optional-as>

<optional-as>1</optional-as>

</config>

</optional-as-list>

</optional-as-lists>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD optional-as <1-4294967295>

Configure peer local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</config>

</local-as-list>

</local-as>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295>

Configure no prepend local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: no-prepend-local-as

Attribute Type: empty

Attribute Name: replace-local-as

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</no-prepend-local-as>

</replace-local-as>

</config>

</local-as-list>

</local-as>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295> (no-prepend|) (replace-as|)

Configure additional paths mode

Adds additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send|disable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-mode>send-receive</additional-paths-mode>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD additional-paths (send-receive|receive|send|disable)

Configure additional path select all

Attribute to select advertise additional path

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</additional-path-select-all>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertise additional-paths all

Configure additional paths best select count

Attribute to select best advertise additional path

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertise additional-paths best <2-3>

Configure activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure afi

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure safi

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure default peer route map name

This attribute allows a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family.

Attribute Name: default-peer-route-map-name

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</default-peer-route-map-name>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD default-originate

Configure peer route map orig name

This attribute configures route map to be used for a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family. This attribute can be used with standard or extended access lists.

Attribute Name: peer-route-map-orig-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<peer-route-map-orig-name>WORD</peer-route-map-orig-name>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD default-originate route-map WORD

Configure weight

This attribute specifies a weight value, for specified address-family, to all routes learned from a neighbor for specified address-family. The route with the highest weight gets preference when the same prefix is learned from more than one peer. Unlike the local-preference attribute, the weight attribute is relevant only to the local router. When the weight is set for a peer group, all members of the peer group get the same weight. This attribute can also be used to assign a different weight to an individual peer-group member. When an individually-configured weight of a peer-group member is removed, its weight is reset to its peer groups weight.

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD weight <0-65535>

Configure route server client

This attribute configures a neighbor as the route server client for specified address-family.

Attribute Name: route-server-client

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</route-server-client>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-server-client

Configure next hop self

This attribute configure the router as the next hop for a BGP-speaking neighbor or peer-group group. This attribute allows a BGP router to change the nexthop information that is sent to the iBGP peer-group. The nexthop information is set to the IP address of the interface used to communicate with the neighbor.

Attribute Name: next-hop-self

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</next-hop-self>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD next-hop-self

Configure peer route reflector

This attribute configures the router as a BGP route reflector and configure the specified neighbor as its client for specified address-family. Route reflectors are a solution for the explosion of iBGP peering within an autonomous system. By route reflection the number of iBGP peers within an AS is reduced. Use this attribute to configure the local router as the route reflector and specify neighbors as its client. An AS can have more than one route reflector. One route reflector treats the other route reflector as another iBGP speaker.

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-reflector-client

Configure address-family peer-route-reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-reflector-client

Configure peer remove private as

This attribute removes the private Autonomous System (AS) number from outbound updates. Private AS numbers are not advertised to the Internet. This attribute is used with external BGP peers only. The router removes the AS numbers only if the update includes private AS numbers. If the update includes both private and public AS numbers, the system treats it as an error.

Attribute Name: peer-remove-private-as

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-remove-private-as>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remove-private-AS

Configure no send community

This attribute specifies if a community attribute should be sent to a BGP neighbor for specified address-family. The community attribute groups destinations in a certain community and applies routing decisions according to those communities. By default, both standard and extended community attributes are sent to a neighbor

Attribute Name: no-send-community

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</no-send-community>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor WORD send-community

Configure no send community type

This attribute specifies the type of community attribute to be sent to a BGP neighbor.

Attribute Name: no-send-community-type

Attribute Type: bits (both|standard|extended|large)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<no-send-community-type>both</no-send-community-type>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor WORD send-community (both|standard|extended|large)

Configure neighbor attribute unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>14</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged

Configure address-family neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>as-path</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged {as-path|next-hop|med}

Configure orf prefix capability

This attribute enables Outbound Router Filtering (ORF), and advertise the ORF capability to its neighbors. The ORFs send and receive capabilities to lessen the number of updates exchanged between neighbors. By filtering updates, this option minimizes generating and processing of updates. The two routers exchange updates to maintain the ORF for each router.

Attribute Name: orf-prefix-capability

Attribute Type: bits (both|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<orf-prefix-capability>both</orf-prefix-capability>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability orf prefix-list (both|receive|send)

Configure peer allow ebgp vpn

This attribute allows an eBGP neighbor to be a VPN peer. By default, BGP VPN functionality is allowed only for iBGP peers. Using the peer-allow-ebgp-vpn attribute allows the VPN connection to be established to an eBGP peer.

Attribute Name: peer-allow-ebgp-vpn

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-allow-ebgp-vpn>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allow-ebgp-vpn

Configure allow as number

This attribute advertises prefixes (routes) even when the source of the prefixes is from the same Autonomous System (AS) number for specified address-family. Use this attribute in a scenario where two routers at different locations use the same Autonomous System number and are connected via an ISP. Once prefixes arrive from one branch at the ISP, they are tagged with the customers AS number. By default, when the ISP passes the prefixes to the other router, the prefixes are dropped if the other router uses the same AS number. Use this attribute to advertise the prefixes at the other side. Control the number of times an AS number is advertised by specifying a number. In a hub and spoke configuration in a VPN, a PE (Provider Edge) router advertises all prefixes containing duplicate AS numbers. Use this attribute to configure two VRFs on each PE router to receive and advertise prefixes. One of the VRFs receives prefixes with AS numbers from all PE routers and then advertises them to neighboring PE routers. The other VRF receives prefixes with AS numbers from the CE (Customer Edge) router and advertises them to all PE routers in the hub and spoke configuration.

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allowas-in <1-10>

Configure address-family allow-as-number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allowas-in <1-10>

Configure capability graceful restart

This attribute configures the router to advertise the Graceful Restart Capability to the neighbors. This configuration indicates that the BGP speaker has the ability to preserve its forwarding state for the address family when BGP restarts. Use this attribute to advertise to the neighbor routers the capability of graceful restart.

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability graceful-restart

Configure address-family capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability graceful-restart

Configure address-family capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability graceful-restart

Configure unsuppress route map name

unsuppress map name. This attribute is used to selectively leak more-specific routes to a particular neighbor.

Attribute Name: unsuppress-route-map-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<unsuppress-route-map-name>WORD</unsuppress-route-map-name>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD unsuppress-map WORD

Configure prefix count

Use this attribute to specify maximum number of prefixes that can be received from a neighbor

Attribute Name: prefix-count

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295>

Configure stop update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> stop-update

Configure maximum-prefix stop-update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> stop-update

Configure maximum prefix warning

This attribute when enabled only give warning message when limit is exceeded. When it is not set and extra prefixes are received, the router ends the peering.

Attribute Name: maximum-prefix-warning

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix-warning>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> warning-only

Configure threshold percentage

Threshold-value in percen. This attribute controls the number of prefixes that can be received from a neighbor. This attribute allows the configuration of a specified number of prefixes that a BGP router is allowed to receive from a neighbor. When the maximum-prefix-warning attribute is not set and extra prefixes are received, the router ends the peering.

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

<threshold-percentage>1</threshold-percentage>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100>

Configure warning only

Throw warning if exceeds threshold-value

Attribute Name: warning-only

Attribute Type: uint8

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

<threshold-percentage>1</threshold-percentage>

</config>

</warning-only>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100> warning-only

Configure access list identifier

Access List information

Attribute Name: access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<distribute-list-filters>

<distribute-list-filter>

<filter-direction>in</filter-direction>

<filter-direction>in</filter-direction>

</config>

<access-list-identifier>WORD</access-list-identifier>

</distribute-list-filter>

</distribute-list-filters>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD distribute-list WORD (in|out)

Configure as access list identifier

Access-list number. This attribute sets a BGP filter. This attribute specifies an access list filter on updates based on the BGP autonomous system paths. Each filter is an access list based on regular expressions

Attribute Name: as-access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<as-list-filters>

<as-list-filter>

<as-list-direction>in</as-list-direction>

<as-list-direction>in</as-list-direction>

</config>

<as-access-list-identifier>WORD</as-access-list-identifier>

</as-list-filter>

</as-list-filters>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD filter-list WORD (in|out)

Configure safi

Use this attribute to start a BGP process.

Attribute Name: bgp-as

Attribute Type: uint32

Attribute Name: afi

Attribute Name: safi

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Range: 1-255

Attribute Name: prefix-list-name

Attribute Type: string

Attribute Name: prefix-filter-direction

Attribute Type: enum (in|out)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<address-families>

<address-family>

<safi>unicast</safi>

<peer-group-tag>WORD</peer-group-tag>

<prefix-list-filters>

<prefix-list-filter>

<prefix-list-name>WORD</prefix-list-name>

<prefix-filter-direction>in</prefix-filter-direction>

</config>

</prefix-list-filter>

</prefix-list-filters>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD prefix-list WORD (in|out)

Configure route map name

Use this attribute to apply a route map to incoming or outgoing routes. This attribute filters updates and modifies attributes. A route map is applied to inbound or outbound updates. Only the routes that pass the route map are sent or accepted in updates.

Attribute Name: route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-map-filters>

<route-map-filter>

<route-map-direction>in</route-map-direction>

<route-map-direction>in</route-map-direction>

</config>

<route-map-name>WORD</route-map-name>

</route-map-filter>

</route-map-filters>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-map WORD (in|out)

Configure admin status

Enable or disable AIGP

This command is supported when following feature are enabled AIGP featured

Attribute Name: admin-status

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<admin-status>disable</admin-status>

</config>

</aigp>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD aigp (disable|enable)

Configure aigp send med

Enable AIGP send multi exit discriminator.

This command is supported when following feature are enabled AIGP featured

Attribute Name: aigp-send-med

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

</aigp-send-med>

</config>

</aigp>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD aigp send med

Configure send cost community id

Send AIGP value in Cost community. And get the Community ID.

This command is supported when following feature are enabled AIGP featured

Attribute Name: send-cost-community-id

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: point-of-insertion

Attribute Type: enum (pre-bestpath|igp-cost)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<cost-community>

<point-of-insertion>pre-bestpath</point-of-insertion>

<send-cost-community-id>0</send-cost-community-id>

</config>

</cost-community>

</aigp>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD aigp send cost-community <0-255> poi (pre-bestpath|igp-cost)

Configure enable transitive

Send AIGP value in Cost community and Enable Transitive Cost Community

This command is supported when following feature are enabled AIGP featured

Attribute Name: enable-transitive

Attribute Type: uint8

Attribute Name: send-cost-community-id

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: point-of-insertion

Attribute Type: enum (pre-bestpath|igp-cost)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<cost-community>

<send-cost-community-id>0</send-cost-community-id>

<point-of-insertion>pre-bestpath</point-of-insertion>

</enable-transitive>

</config>

</cost-community>

</aigp>

</address-family>

</address-families>

</peer-group>

</peer-groups>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD aigp send cost-community <0-255> poi (pre-bestpath|igp-cost) transitive

clear bgp peer-group WORD l2vpn evpn soft (out|in|)

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Range: 1-255

Attribute Name: soft-reconfig

Attribute Type: enum (out|in|soft-only)

Netconf RPC payload

<ipi-bgp-peer-group_clear-peer-group-l2vpn-evpn-soft-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<peer-group-tag>WORD</peer-group-tag>

<soft-reconfig>soft-only</soft-reconfig>

</ipi-bgp-peer-group_clear-peer-group-l2vpn-evpn-soft-all>

Command Syntax

clear bgp peer-group WORD l2vpn evpn soft (out|in|)

IPI-BGP-PEER

Configure enable peer bfd

Enable bidirectional forwarding detection (BFD) for the BGP peer

Attribute Name: enable-peer-bfd

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) fall-over bfd

Configure bgp as

Enable bidirectional forwarding detection (BFD) for the BGP peer

Attribute Name: enable-peer-bfd

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd

Configure enable peer bfd multihop

Enable bidirectional forwarding detection (BFD) for the BGP peer with multihop

Attribute Name: enable-peer-bfd-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) fall-over bfd multihop

Configure peer address

Enable bidirectional forwarding detection (BFD) for the BGP peer with multihop

Attribute Name: enable-peer-bfd-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd multihop

Configure interface name

Configure the interface name of a BGP neighbor.

Attribute Name: interface-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<interface-name>WORD</interface-name>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) interface WORD

Configure mapped peer group tag

Adds a neighbor to an existing peer group. Neighbors with the same update policies are grouped into peer groups. This facilitates the updates of various policies, such as distribute and filter lists. The peer group is then configured easily with any of the neighbor attributes. Any changes made to the peer group affect all members.

Attribute Name: mapped-peer-group-tag

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<mapped-peer-group-tag>WORD</mapped-peer-group-tag>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) peer-group WORD

Configure peer mapped-peer-group-tag

Attribute Name: mapped-peer-group-tag

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<mapped-peer-group-tag>WORD</mapped-peer-group-tag>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peergroup WORD

Configure tcp adjust mss

Use this attribute to set the BGP TCP MSS value of a neighbor.

Attribute Name: tcp-adjust-mss

Attribute Type: uint16

Attribute Range: 40-1440

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<tcp-adjust-mss>40</tcp-adjust-mss>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD tcp-mss <40-1440>

Configure peer port

Sets the BGP port number of a neighbor.

Attribute Name: peer-port

Attribute Type: uint16

Default Value: 179

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-port>0</peer-port>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD port <0-65535>

Configure min route advertisement interval

Attribute Name: min-route-advertisement-interval

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<min-route-advertisement-interval>0</min-route-advertisement-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertisement-interval <0-65535>

Configure peer as origin interval

Configures the minimum interval between the sending of AS-origination routing updates.

Attribute Name: peer-as-origin-interval

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as-origin-interval>1</peer-as-origin-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD as-origination-interval <1-65535>

Configure collide established

Include a neighbor already in an established state for conflict resolution when a TCP connection collision is detected.

Attribute Name: collide-established

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</collide-established>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD collide-established

Configure peer description

Associates a description with a neighbor. This helps in identifying a neighbor quickly. It is useful for an ISP that has multiple neighbor relationships.

Attribute Name: peer-description

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-description>LINE</peer-description>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD description LINE

Configure disallow infinite hold time

Disallow configuration of infinite hold-time. A hold-time of 0 seconds from the peer (during exchange of open messages) or the user (during configuration) will be rejected.

Attribute Name: disallow-infinite-hold-time

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</disallow-infinite-hold-time>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD disallow-infinite-holdtime

Configure disable capability negotiation

Disable the capability negotiation. It allows compatibility with older BGP versions that have no capability parameters used in open messages between peers.

Attribute Name: disable-capability-negotiation

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</disable-capability-negotiation>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD dont-capability-negotiate

Configure enforce multi hop

Turns on the enforcement of eBGP neighbors perform multihop.

Attribute Name: enforce-multi-hop

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enforce-multi-hop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD enforce-multihop

Configure graceful shut

Attribute Name: graceful-shut

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</graceful-shut>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut

Configure graceful shutdown timer

Configure the value of the graceful shutdown timer. After the timer expires, the BGP session initiated for graceful shutdown is shut down.

Attribute Name: graceful-shutdown-timer

Attribute Type: uint32

Attribute Range: 10-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<graceful-shutdown-timer>10</graceful-shutdown-timer>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut-timer <10-65535>

Configure neighbor override capability

Override a capability negotiation result and use locally configured values.

Attribute Name: neighbor-override-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-override-capability>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD override-capability

Configure neighbor passive

Sets a BGP neighbor as passive.

Attribute Name: neighbor-passive

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-passive>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD passive

Configure peer restart time

Attribute Name: peer-restart-time

Attribute Type: uint32

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-restart-time>1</peer-restart-time>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD restart-time <1-3600>

Configure peer shutdown

Disables a neighbor administratively. It will terminate any active session for a specified neighbor and clear all related routing information. In case a peer group is specified for shutdown, a large number of peering sessions could be terminated.

Attribute Name: peer-shutdown

Attribute Type: empty

Attribute Name: peer-shutdown-description

Attribute Type: string

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

<peer-shutdown-description>1</peer-shutdown-description>

</config>

</peer-shutdown>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD shutdown (description LINE|)

Configure neighbor strict capability match

Close the BGP connection if capability value does not match the remote peer.

Attribute Name: neighbor-strict-capability-match

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-strict-capability-match>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD strict-capability-match

Configure source identifier

Attribute Name: source-identifier

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<source-identifier>WORD</source-identifier>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD update-source WORD

Configure bgp version

Attribute Name: bgp-version

Attribute Type: uint8

Default Value: 4

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-version>(4)</bgp-version>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD version (4)

Configure enable ext opt param len

Use this attribute for a specific peer to encode extended optional parameter length.

Attribute Name: enable-ext-opt-param-len

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-ext-opt-param-len>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD extended-optional-param

Configure peer connect interval

Attribute Name: peer-connect-interval

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-connect-interval>1</peer-connect-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers connect <1-65535>

Configure peer as

Attribute Name: peer-as

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as>-2</peer-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remote-as internal

Configure peer peer-as

Attribute Name: peer-as

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as>-1</peer-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remote-as external

Configure peer peer-as

Attribute Name: peer-as

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as>1</peer-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) remote-as <1-4294967295>

Configure peer peer-as

Attribute Name: peer-as

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as>1</peer-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) remote-as <1-4294967295>

Configure peer graceful-shut

Attribute Name: graceful-shut

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</graceful-shut>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) g-shut

Configure peer graceful-shutdown-timer

Configure the value of the graceful shutdown timer. After the timer expires, the BGP session initiated for graceful shutdown is shut down.

Attribute Name: graceful-shutdown-timer

Attribute Type: uint32

Attribute Range: 10-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<graceful-shutdown-timer>10</graceful-shutdown-timer>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) g-shut-timer <10-65535>

Configure peer peer-restart-time

Attribute Name: peer-restart-time

Attribute Type: uint32

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-restart-time>1</peer-restart-time>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) restart-time <1-3600>

Configure peer peer-description

Associates a description with a neighbor. This helps in identifying a neighbor quickly. It is useful for an ISP that has multiple neighbor relationships.

Attribute Name: peer-description

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-description>LINE</peer-description>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) description LINE

Configure peer peer-connect-interval

Attribute Name: peer-connect-interval

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-connect-interval>1</peer-connect-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) timers connect <1-65535>

Configure peer peer-as-origin-interval

Configures the minimum interval between the sending of AS-origination routing updates.

Attribute Name: peer-as-origin-interval

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-as-origin-interval>1</peer-as-origin-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) as-origination-interval <1-65535>

Configure peer min-route-advertisement-interval

Attribute Name: min-route-advertisement-interval

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<min-route-advertisement-interval>0</min-route-advertisement-interval>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) advertisement-interval <0-65535>

Configure enable dynamic capability

Use this attribute to enable the dynamic capability for a specific peer. This attribute allows a BGP speaker to advertise or withdraw an address family capability to a peer in a non-disruptive manner.

Attribute Name: enable-dynamic-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-dynamic-capability>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability dynamic

Configure peer collide-established

Include a neighbor already in an established state for conflict resolution when a TCP connection collision is detected.

Attribute Name: collide-established

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</collide-established>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) collide-established

Configure peer source-identifier

Attribute Name: source-identifier

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<source-identifier>WORD</source-identifier>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) update-source WORD

Configure peer enforce-multi-hop

Turns on the enforcement of eBGP neighbors perform multihop.

Attribute Name: enforce-multi-hop

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enforce-multi-hop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) enforce-multihop

Configure peer neighbor-override-capability

Override a capability negotiation result and use locally configured values.

Attribute Name: neighbor-override-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-override-capability>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) override-capability

Configure peer neighbor-strict-capability-match

Close the BGP connection if capability value does not match the remote peer.

Attribute Name: neighbor-strict-capability-match

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-strict-capability-match>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) strict-capability-match

Configure peer disallow-infinite-hold-time

Disallow configuration of infinite hold-time. A hold-time of 0 seconds from the peer (during exchange of open messages) or the user (during configuration) will be rejected.

Attribute Name: disallow-infinite-hold-time

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</disallow-infinite-hold-time>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) disallow-infinite-holdtime

Configure peer disable-capability-negotiation

Disable the capability negotiation. It allows compatibility with older BGP versions that have no capability parameters used in open messages between peers.

Attribute Name: disable-capability-negotiation

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</disable-capability-negotiation>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) dont-capability-negotiate

Configure peer neighbor-passive

Sets a BGP neighbor as passive.

Attribute Name: neighbor-passive

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</neighbor-passive>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) passive

Configure peer shutdown description

Use this attribute to send shutdown communication message to inform peer the reason for the shutdown of the BGP session.

Attribute Name: peer-shutdown-description

Attribute Type: string

Attribute Range: 1-255

Attribute Name: peer-shutdown

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</peer-shutdown>

</config>

<peer-shutdown-description>1</peer-shutdown-description>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) shutdown (description LINE|)

Configure peer peer-port

Sets the BGP port number of a neighbor.

Attribute Name: peer-port

Attribute Type: uint16

Default Value: 179

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<peer-port>0</peer-port>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) port <0-65535>

Configure peer bgp-version

Attribute Name: bgp-version

Attribute Type: uint8

Default Value: 4

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-version>(4)</bgp-version>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) version (4)

Configure peer enable-ext-opt-param-len

Use this attribute for a specific peer to encode extended optional parameter length.

Attribute Name: enable-ext-opt-param-len

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

</enable-ext-opt-param-len>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) extended-optional-param

Configure peer tcp-adjust-mss

Use this attribute to set the BGP TCP MSS value of a neighbor.

Attribute Name: tcp-adjust-mss

Attribute Type: uint16

Attribute Range: 40-1440

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<tcp-adjust-mss>40</tcp-adjust-mss>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) tcp-mss <40-1440>

Configure hold time

Use this attribute to globally set or reset the holdtime values for all the neighbors.

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<keep-alive>0</keep-alive>

<hold-time>0</hold-time>

</config>

</timers>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers <0-65535> <0-65535>

Configure keep alive

Use this attribute to globally set or reset the keepalive values for all the neighbors

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<hold-time>0</hold-time>

<keep-alive>0</keep-alive>

</config>

</timers>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) timers <0-65535> <0-65535>

Configure enabled

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

</enabled>

</config>

</ebgp-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) ebgp-multihop

Configure maximum hop count

Attribute Name: enabled

Attribute Type: empty

Attribute Name: maximum-hop-count

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

<maximum-hop-count>1</maximum-hop-count>

</enabled>

</config>

</ebgp-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) ebgp-multihop <1-255>

Configure ebgp-multihop enabled

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

</enabled>

</config>

</ebgp-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop

Configure ebgp-multihop enabled

Attribute Name: enabled

Attribute Type: empty

Attribute Name: maximum-hop-count

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

<maximum-hop-count>1</maximum-hop-count>

</enabled>

</config>

</ebgp-multihop>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop <1-255>

Configure peer local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</config>

</local-as-list>

</local-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) local-as <1-4294967295>

Configure local-as peer-local-as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</config>

</local-as-list>

</local-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295>

Configure no prepend local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: no-prepend-local-as

Attribute Type: empty

Attribute Name: replace-local-as

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</no-prepend-local-as>

</replace-local-as>

</config>

</local-as-list>

</local-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) local-as <1-4294967295> (no-prepend|) (replace-as|)

Configure replace local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: no-prepend-local-as

Attribute Type: empty

Attribute Name: replace-local-as

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</no-prepend-local-as>

</replace-local-as>

</config>

</local-as-list>

</local-as>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295> (no-prepend|) (replace-as|)

Configure auth key encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>1</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) authentication-key (0|1) WORD

Configure password

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>2</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) authentication-key WORD

Configure bgp-password auth-key-encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>1</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key (0|1) WORD

Configure bgp-password auth-key-encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>2</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key WORD

Configure additional paths mode

Adds additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send|disable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-mode>send-receive</additional-paths-mode>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) additional-paths (send-receive|receive|send|disable)

Configure additional path select all

Attribute to select advertise additional path

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</additional-path-select-all>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) advertise additional-paths all

Configure additional paths best select count

Attribute to select best advertise additional path

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) advertise additional-paths best <2-3>

Configure activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure afi

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure safi

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) activate

Configure address-family activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) activate

Configure address-family activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure address-family activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) activate

Configure de activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD de-activate

Configure address-family de-activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD de-activate

Configure address-family de-activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) de-activate

Configure address-family de-activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) de-activate

Configure address-family de-activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD de-activate

Configure address-family de-activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</de-activate>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) de-activate

Configure default peer route map name

This attribute allows a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family.

Attribute Name: default-peer-route-map-name

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</default-peer-route-map-name>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) default-originate

Configure address-family default-peer-route-map-name

This attribute allows a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family.

Attribute Name: default-peer-route-map-name

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</default-peer-route-map-name>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD default-originate

Configure peer route map orig name

Attribute Name: peer-route-map-orig-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<peer-route-map-orig-name>WORD</peer-route-map-orig-name>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) default-originate route-map WORD

Configure weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) weight <0-65535>

Configure address-family weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD weight <0-65535>

Configure route server client

This attribute configures a neighbor as the route server client for specified address-family.

Attribute Name: route-server-client

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</route-server-client>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) route-server-client

Configure address-family route-server-client

This attribute configures a neighbor as the route server client for specified address-family.

Attribute Name: route-server-client

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</route-server-client>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-server-client

Configure next hop self

This attribute configure the router as the next hop for a BGP-speaking neighbor or peer group. This attribute allows a BGP router to change the nexthop information that is sent to the iBGP peer. The nexthop information is set to the IP address of the interface used to communicate with the neighbor.

Attribute Name: next-hop-self

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</next-hop-self>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) next-hop-self

Configure address-family next-hop-self

Attribute Name: next-hop-self

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</next-hop-self>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD next-hop-self

Configure peer route reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) route-reflector-client

Configure address-family peer-route-reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) route-reflector-client

Configure address-family peer-route-reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-reflector-client

Configure address-family peer-route-reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-route-reflector>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-reflector-client

Configure peer remove private as

Attribute Name: peer-remove-private-as

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-remove-private-as>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) remove-private-AS

Configure address-family peer-remove-private-as

Attribute Name: peer-remove-private-as

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-remove-private-as>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remove-private-AS

Configure no send community

Attribute Name: no-send-community

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</no-send-community>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor (A.B.C.D|X:X::X:X) send-community

Configure no send community type

This attribute specifies the type of community attribute to be sent to a BGP neighbor.

Attribute Name: no-send-community-type

Attribute Type: bits (both|standard|extended|large)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<no-send-community-type>both</no-send-community-type>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor (A.B.C.D|X:X::X:X) send-community (both|standard|extended|large)

Configure neighbor attribute unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>14</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) attribute-unchanged

Configure address-family neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>as-path</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) attribute-unchanged {as-path|next-hop|med}

Configure address-family neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>14</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged

Configure address-family neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<neighbor-attribute-unchanged>as-path</neighbor-attribute-unchanged>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged {as-path|next-hop|med}

Configure orf prefix capability

Attribute Name: orf-prefix-capability

Attribute Type: bits (both|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<orf-prefix-capability>both</orf-prefix-capability>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability orf prefix-list (both|receive|send)

Configure address-family orf-prefix-capability

Attribute Name: orf-prefix-capability

Attribute Type: bits (both|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<orf-prefix-capability>both</orf-prefix-capability>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability orf prefix-list (both|receive|send)

Configure peer allow ebgp vpn

Attribute Name: peer-allow-ebgp-vpn

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</peer-allow-ebgp-vpn>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) allow-ebgp-vpn

Configure allow as number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) allowas-in <1-10>

Configure address-family allow-as-number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) allowas-in <1-10>

Configure address-family allow-as-number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allowas-in <1-10>

Configure address-family allow-as-number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<allow-as-number>1</allow-as-number>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allowas-in <1-10>

Configure capability graceful restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability graceful-restart

Configure address-family capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability graceful-restart

Configure address-family capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability graceful-restart

Configure extended nexthop encode

A BGP speaker that wishes to advertise an IPv6 next hop for IPv4 NLRI for VPN-IPv4 NLRI to a BGP peer as per this specification MUST use the Capability Advertisement procedures defined with the Extended Next Hop Encoding capability to determine whether its peer supports this for the NLRI AFI/SAFI pair(s) of interest.

Attribute Name: extended-nexthop-encode

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</extended-nexthop-encode>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability extended-nexthop-encode

Configure address-family capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

</capability-graceful-restart>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) capability graceful-restart

Configure unsuppress route map name

unsuppress map name. This attribute is used to selectively leak more-specific routes to a particular neighbor.

Attribute Name: unsuppress-route-map-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<unsuppress-route-map-name>WORD</unsuppress-route-map-name>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) unsuppress-map WORD

Configure address-family unsuppress-route-map-name

unsuppress map name. This attribute is used to selectively leak more-specific routes to a particular neighbor.

Attribute Name: unsuppress-route-map-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<unsuppress-route-map-name>WORD</unsuppress-route-map-name>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD unsuppress-map WORD

Configure prefix count

Use this attribute to specify maximum number of prefixes that can be received from a neighbor

Attribute Name: prefix-count

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295>

Configure maximum-prefixes prefix-count

Use this attribute to specify maximum number of prefixes that can be received from a neighbor

Attribute Name: prefix-count

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295>

Configure stop update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295> stop-update

Configure maximum-prefix stop-update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295> stop-update

Configure maximum-prefix stop-update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> stop-update

Configure maximum prefix warning

This attribute when enabled only give warning message when limit is exceeded. When it is not set and extra prefixes are received, the router ends the peering.

Attribute Name: maximum-prefix-warning

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix-warning>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295> warning-only

Configure maximum-prefix maximum-prefix-warning

This attribute when enabled only give warning message when limit is exceeded. When it is not set and extra prefixes are received, the router ends the peering.

Attribute Name: maximum-prefix-warning

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix-warning>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> warning-only

Configure threshold percentage

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

<threshold-percentage>1</threshold-percentage>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295> <1-100>

Configure maximum-prefix threshold-percentage

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

<threshold-percentage>1</threshold-percentage>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100>

Configure warning only

Throw warning if exceeds threshold-value

Attribute Name: warning-only

Attribute Type: uint8

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

<threshold-percentage>1</threshold-percentage>

</config>

</warning-only>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) maximum-prefix <1-4294967295> <1-100> warning-only

Configure maximum-prefix warning-only

Throw warning if exceeds threshold-value

Attribute Name: warning-only

Attribute Type: uint8

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

<threshold-percentage>1</threshold-percentage>

</config>

</warning-only>

</maximum-prefix>

</maximum-prefixes>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100> warning-only

Configure access list identifier

Access List information

Attribute Name: access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<distribute-list-filters>

<distribute-list-filter>

<filter-direction>in</filter-direction>

<filter-direction>in</filter-direction>

</config>

<access-list-identifier>WORD</access-list-identifier>

</distribute-list-filter>

</distribute-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) distribute-list WORD (in|out)

Configure filter direction

Access List information

Attribute Name: access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<distribute-list-filters>

<distribute-list-filter>

<filter-direction>in</filter-direction>

<filter-direction>in</filter-direction>

</config>

<access-list-identifier>WORD</access-list-identifier>

</distribute-list-filter>

</distribute-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD distribute-list WORD (in|out)

Configure as access list identifier

Attribute Name: as-access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<as-list-filters>

<as-list-filter>

<as-list-direction>in</as-list-direction>

<as-list-direction>in</as-list-direction>

</config>

<as-access-list-identifier>WORD</as-access-list-identifier>

</as-list-filter>

</as-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) filter-list WORD (in|out)

Configure as list direction

Attribute Name: as-access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<as-list-filters>

<as-list-filter>

<as-list-direction>in</as-list-direction>

<as-list-direction>in</as-list-direction>

</config>

<as-access-list-identifier>WORD</as-access-list-identifier>

</as-list-filter>

</as-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD filter-list WORD (in|out)

Configure prefix list name

This attribute specify a prefix list for filtering BGP advertisements for specified address-family. Filtering by prefix list matches the prefixes of routes with those listed in the prefix list. If there is a match, the route is used. An empty prefix list permits all prefixes. If a given prefix does not match any entries of a prefix list, the route is denied access. When multiple entries of a prefix list match a prefix, the entry with the smallest sequence number is considered to be a real match. The router begins the search at the top of the prefix list, with the sequence number 1. Once a match or deny occurs, the router does not need to go through the rest of the prefix list. For efficiency the most common matches or denies are listed at the top.

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<prefix-list-filters>

<prefix-list-filter>

<prefix-filter-direction>in</prefix-filter-direction>

<prefix-filter-direction>in</prefix-filter-direction>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix-list-filter>

</prefix-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) prefix-list WORD (in|out)

Configure prefix filter direction

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<prefix-list-filters>

<prefix-list-filter>

<prefix-filter-direction>in</prefix-filter-direction>

<prefix-filter-direction>in</prefix-filter-direction>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix-list-filter>

</prefix-list-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD prefix-list WORD (in|out)

Configure route map name

Attribute Name: route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-map-filters>

<route-map-filter>

<route-map-direction>in</route-map-direction>

<route-map-direction>in</route-map-direction>

</config>

<route-map-name>WORD</route-map-name>

</route-map-filter>

</route-map-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) route-map WORD (in|out)

Configure route map direction

Attribute Name: route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<route-map-filters>

<route-map-filter>

<route-map-direction>in</route-map-direction>

<route-map-direction>in</route-map-direction>

</config>

<route-map-name>WORD</route-map-name>

</route-map-filter>

</route-map-filters>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-map WORD (in|out)

Configure admin status

Enable or disable AIGP

This command is supported when following feature are enabled AIGP feature enabled

Attribute Name: admin-status

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<admin-status>disable</admin-status>

</config>

</aigp>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) aigp (disable|enable)

Configure aigp send med

Enable AIGP send multi exit discriminator.

This command is supported when following feature are enabled AIGP feature enabled

Attribute Name: aigp-send-med

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

</aigp-send-med>

</config>

</aigp>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) aigp send med

Configure send cost community id

Send AIGP value in Cost community. And get the Community ID.

This command is supported when following feature are enabled AIGP feature enabled

Attribute Name: send-cost-community-id

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: point-of-insertion

Attribute Type: enum (pre-bestpath|igp-cost)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<cost-community>

<point-of-insertion>pre-bestpath</point-of-insertion>

<send-cost-community-id>0</send-cost-community-id>

</config>

</cost-community>

</aigp>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) aigp send cost-community <0-255> poi (pre-bestpath|igp-cost)

Configure enable transitive

Send AIGP value in Cost community and Enable Transitive Cost Community

This command is supported when following feature are enabled AIGP feature enabled

Attribute Name: enable-transitive

Attribute Type: uint8

Attribute Name: send-cost-community-id

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: point-of-insertion

Attribute Type: enum (pre-bestpath|igp-cost)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<peers>

<peer>

<peer-address>A.B.C.D|X:X::X:X</peer-address>

<peer-address>BGP_IP_ADDR_T</peer-address>

</config>

<address-families>

<address-family>

<safi>unicast</safi>

<safi>unicast</safi>

</config>

<aigp>

<cost-community>

<send-cost-community-id>0</send-cost-community-id>

<point-of-insertion>pre-bestpath</point-of-insertion>

</enable-transitive>

</config>

</cost-community>

</aigp>

</address-family>

</address-families>

</peer>

</peers>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) aigp send cost-community <0-255> poi (pre-bestpath|igp-cost) transitive

clear ip bgp * (description LINE|)

Attribute Name: peer-reset-description

Attribute Type: string

Attribute Range: 1-255

Netconf RPC payload

<ipi-bgp-peer_clear-ip-bgp-all-peer xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<peer-reset-description>1</peer-reset-description>

</ipi-bgp-peer_clear-ip-bgp-all-peer>

Command Syntax

clear ip bgp * (description LINE|)

clear bgp * l2vpn evpn soft (out|in|)

Attribute Name: soft-reconfig

Attribute Type: enum (out|in|soft-only)

Netconf RPC payload

<ipi-bgp-peer_clear-bgp-l2vpn-evpn-soft-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<soft-reconfig>soft-only</soft-reconfig>

</ipi-bgp-peer_clear-bgp-l2vpn-evpn-soft-all>

Command Syntax

clear bgp * l2vpn evpn soft (out|in|)

clear bgp <1-4294967295> l2vpn evpn soft (out|in|)

Attribute Name: peer-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: soft-reconfig

Attribute Type: enum (out|in|soft-only)

Netconf RPC payload

<ipi-bgp-peer_clear-bgp-remote-as-l2vpn-evpn-soft-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<peer-as>1</peer-as>

<soft-reconfig>soft-only</soft-reconfig>

</ipi-bgp-peer_clear-bgp-remote-as-l2vpn-evpn-soft-all>

Command Syntax

clear bgp <1-4294967295> l2vpn evpn soft (out|in|)

clear bgp (A.B.C.D|X:X::X:X|WORD) l2vpn evpn soft (out|in|)

Attribute Name: peer-address

Attribute Type: union

Attribute Name: soft-reconfig

Attribute Type: enum (out|in|soft-only)

Netconf RPC payload

<ipi-bgp-peer_clear-bgp-peer-address-l2vpn-evpn-soft xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<peer-address>BGP_IP_ADDR_T</peer-address>

<soft-reconfig>soft-only</soft-reconfig>

</ipi-bgp-peer_clear-bgp-peer-address-l2vpn-evpn-soft>

Command Syntax

clear bgp (A.B.C.D|X:X::X:X|WORD) l2vpn evpn soft (out|in|)

IPI-BGP-ADDRESS-FAMILY-VRF

Configure enable auto summary

Attribute Name: enable-auto-summary

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</enable-auto-summary>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

auto-summary

Configure enable network igp sync

Use this attribute to enable IGP synchronization for BGP static network routes

Attribute Name: enable-network-igp-sync

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</enable-network-igp-sync>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network synchronization

Configure enable igp sync

Attribute Name: enable-igp-sync

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</enable-igp-sync>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

synchronization

Configure multipath relax

This attribute to specifies a BGP as-path relax configuration.

Attribute Name: multipath-relax

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</multipath-relax>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp bestpath as-path multipath-relax

Configure graceful shutdown

Gracefully shut down all sessions of the AFI/SAFI beloging to the vrf under this router. The BGP graceful shutdown feature reduces packet loss during maintenance activity.

Attribute Name: graceful-shutdown

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</graceful-shutdown>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut

Configure graceful shutdown capable

This attribute to enable the graceful shutdown capability

Attribute Name: graceful-shutdown-capable

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</graceful-shutdown-capable>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut-capable

Configure graceful shutdown local preference

This attribute sets the local preference of the router to use during graceful shutdown. The local preference value indicates the preferred path when there are multiple paths to the same destination in a single routing database. The path with a higher preference value is the preferred one. The preferred path is sent to all routers and access servers in the local autonomous system.

Attribute Name: graceful-shutdown-local-preference

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<graceful-shutdown-local-preference>0</graceful-shutdown-local-preference>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp g-shut-local-preference <0-4294967295>

Configure additional path select all

Use this attribute to select criteria to pick the paths

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</additional-path-select-all>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths select all

Configure additional paths mode

Use this attribute to add additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<additional-paths-mode>send-receive</additional-paths-mode>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths (send-receive|receive|send)

Configure additional paths best select count

Use this attribute to select best N paths

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp additional-paths select best <2-3>

Configure local

Use this attribute to specify distance value for local routes

Attribute Name: local

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

</config>

</distance>

</distances>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

distance bgp <1-255> <1-255> <1-255>

Configure aggregate address

Attribute Name: aggregate-address

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

</aggregate-address-list>

</aggregate-address-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address (A.B.C.D/M|A.B.C.D A.B.C.D|X:X::X:X/M)

Configure aggregate type

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>1</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address as-set

Configure bgp as

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>2</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address summary-only

Configure afi

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>3</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address as-set summary-only

Configure safi

Attribute Name: aggregate-type

Attribute Type: enum (as-set|summary-only|as-set-and-summary-only)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<aggregate-address-lists>

<aggregate-address-list>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

<aggregate-address>CML_IP_PREFIX_T</aggregate-address>

</config>

<aggregate-type>3</aggregate-type>

</aggregate-address-list>

</aggregate-address-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

aggregate-address summary-only as-set

Configure ebgp max path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for eBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path

Attribute Name: ebgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<maximum-paths>

<ebgp-max-path>2</ebgp-max-path>

</config>

</maximum-paths>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ebgp <2-64>

Configure vrf name

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for eBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path

Attribute Name: ebgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<maximum-paths>

<ebgp-max-path>2</ebgp-max-path>

</config>

</maximum-paths>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ebgp <2-64>

Configure ibgp max path

Use this attribute to set the number of equal-cost multi-path (ECMP) routes for iBGP. You can install multiple BGP paths to the same destination to balance the load on the forwarding path.

Attribute Name: ibgp-max-path

Attribute Type: int32

Attribute Range: 2-64

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<maximum-paths>

<ibgp-max-path>2</ibgp-max-path>

</config>

</maximum-paths>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

max-paths ibgp <2-64>

Configure map name

This command is supported when following feature are enabled bgp table map feature enabled

Attribute Name: map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<table-map>

<map-name>WORD</map-name>

</config>

</table-map>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

table-map WORD

Configure table map filter

This command is supported when following feature are enabled bgp table map feature enabled

Attribute Name: table-map-filter

Attribute Type: boolean

Attribute Name: map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<table-map>

<map-name>WORD</map-name>

<table-map-filter>true</table-map-filter>

</config>

</table-map>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

table-map WORD filter

Configure enable dampening

Use this attribute to enable route flap dampening

Attribute Name: enable-dampening

Attribute Type: enum (enable-dampening)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

</route-flap-dampening>

</route-flap-dampenings>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening

Configure reach half life

Use this attribute to configure reachability half-life time for the penalty in minutes for the bgp route dampening. The time for the penalty to decrease to one-half of its current value.

Attribute Name: reach-half-life

Attribute Type: uint32

Default Value: 15

Attribute Range: 1-45

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<reach-half-life>1</reach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45>

Configure max suppress time

Use this attribute to configure the value to start suppressing a route for BGP route dampening. When the penalty for a route exceeds the suppress value, the route is suppressed

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

</config>

<max-suppress-time>1</max-suppress-time>

</route-flap-dampening>

</route-flap-dampenings>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255>

Configure unreach half life

Attribute Name: unreach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reach-half-life

Attribute Type: uint32

Attribute Range: 1-45

Attribute Name: reuse-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: suppress-penalty

Attribute Type: uint32

Attribute Range: 1-20000

Attribute Name: max-suppress-time

Attribute Type: uint32

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<reach-half-life>1</reach-half-life>

<reuse-penalty>1</reuse-penalty>

<suppress-penalty>1</suppress-penalty>

<max-suppress-time>1</max-suppress-time>

</config>

<unreach-half-life>1</unreach-half-life>

</route-flap-dampening>

</route-flap-dampenings>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening <1-45> <1-20000> <1-20000> <1-255> <1-45>

Configure dampening rmap name

Use this attribute to configure route map to specify criteria for dampening.

Attribute Name: dampening-rmap-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-flap-dampenings>

<route-flap-dampening>

<enable-dampening>enable-dampening</enable-dampening>

<enable-dampening>enable-dampening</enable-dampening>

</config>

<dampening-rmap-name>WORD</dampening-rmap-name>

</route-flap-dampening>

</route-flap-dampenings>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

bgp dampening route-map WORD

Configure protocol type

Attribute Name: protocol-type

Attribute Name: redist-route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<route-redistribute-lists>

<route-redistribute-list>

<protocol-type>connected</protocol-type>

<protocol-type>connected</protocol-type>

<redist-route-map-name>WORD</redist-route-map-name>

</config>

</route-redistribute-list>

</route-redistribute-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

Configure ospf instance number

Attribute Name: ospf-instance-number

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<bgp-redistribute-ospfs>

<bgp-redistribute-ospf>

<ospf-instance-number>""</ospf-instance-number>

<ospf-instance-number>""</ospf-instance-number>

</config>

</bgp-redistribute-ospf>

</bgp-redistribute-ospfs>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

redistribute (ospf) (WORD|<1-65535>)

Configure redistribute ospf route map

Use this attribute to specify route map to redistribute routes from OSPF into BGP.

Attribute Name: redistribute-ospf-route-map

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<bgp-redistribute-ospfs>

<bgp-redistribute-ospf>

<ospf-instance-number>""</ospf-instance-number>

<ospf-instance-number>""</ospf-instance-number>

</config>

<redistribute-ospf-route-map>WORD</redistribute-ospf-route-map>

</bgp-redistribute-ospf>

</bgp-redistribute-ospfs>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

redistribute (ospf) route-map WORD

Configure peer as

This attribute specifies a neighbors autonomous system number. If the specified ASN matches the ASN number specified in the router bgp global configuration, the neighbor is identified as internal. If the ASN does not match, it is identified as external to the local AS.

Attribute Name: peer-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-as>1</peer-as>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) remote-as <1-4294967295>

Configure source identifier

This attribute allows internal BGP sessions to use any operational interface for TCP connections. Use this attribute in conjunction with any specified interface on the router. The loopback interface is the interface that is most commonly used with this attribute. The use of loopback interface eliminates a dependency and BGP does not have to rely on the availability of a particular interface for making TCP connections.

Attribute Name: source-identifier

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<source-identifier>WORD</source-identifier>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor update-source WORD

Configure bgp version

BGP Version. This attribute configures router to accept only a particular BGP version. By default, the system uses BGP version 4 and on request dynamically negotiates down to version 2. Using this attribute disables the routers version-negotiation capability and forces the router to use only a specified version with the neighbor.

Attribute Name: bgp-version

Attribute Type: uint8

Default Value: 4

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<bgp-version>(4)</bgp-version>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor version (4)

Configure peer connection interval

Connect timer value. This attribute sets the timers for a specific BGP neighbor. Keepalive messages are sent by a router to inform another router that the BGP connection between the two is still active. The keepalive interval is the period of time between each keepalive message sent by the router. The holdtime interval is the time the router waits to receive a keepalive message and if it does not receive a message for this period it declares the neighbor dead.

Attribute Name: peer-connection-interval

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-connection-interval>1</peer-connection-interval>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor timers connect <1-65535>

Configure enforce multihop

This attribute turns on the enforcement of eBGP neighbors perform multihop.

Attribute Name: enforce-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</enforce-multihop>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor enforce-multihop

Configure peer shutdown

This attribute disables a neighbor administratively. Use this attribute to terminate any active session for a specified neighbor and clear all related routing information. In case a peer group is specified for shutdown, a large number of peering sessions could be terminated.

Attribute Name: peer-shutdown

Attribute Type: uint8

Attribute Name: peer-shutdown-description

Attribute Type: string

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-shutdown-description>1</peer-shutdown-description>

</config>

</peer-shutdown>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor shutdown (description LINE|)

Configure neighbor passive

Use this attribute to set a BGP neighbor as passive.

Attribute Name: neighbor-passive

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</neighbor-passive>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor passive

Configure disable capability negotiation

Use this attribute to disable capability negotiation. The capability negotiation is performed by default. This attribute is used to allow compatibility with older BGP versions that have no capability parameters used in open messages between peers.

Attribute Name: disable-capability-negotiation

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</disable-capability-negotiation>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor dont-capability-negotiate

Configure enable dynamic capability

Attribute Name: enable-dynamic-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</enable-dynamic-capability>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor capability dynamic

Configure min route advertisement interval

Minimum route advertisement interval. Sets minimum interval between the sending of BGP routing updates. To reduce the flapping of routes to internet, a minimum advertisement interval is set, so that the BGP routing updates are sent only per interval seconds. BGP dampening can also be used to control the effects of flapping routes.

Attribute Name: min-route-advertisement-interval

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<min-route-advertisement-interval>0</min-route-advertisement-interval>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor advertisement-interval <0-65535>

Configure peer as origin interval

Time interval. This attribute adjust the interval of sending AS origination routing updates. This attribute is used to change the minimum interval between the sending of AS-origination routing updates.

Attribute Name: peer-as-origin-interval

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-as-origin-interval>1</peer-as-origin-interval>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor as-origination-interval <1-65535>

Configure neighbor as override

Use this attribute to configure a PE router to override the Autonomous System Number (ASN) of a site with the ASN of a provider. BGP normally ignores the routes from the same AS. However, this attribute is used to override the customers ASN in BGP, so that the customer CE accepts and installs routes from the same AS. Typically, this attribute is used when Customer Edge (CE) routers have the same ASN in some or all sites. As per BGP requirement, a BGP speaker rejects a route that has the same ASN as itself, in the AS_PATH attribute. Thus the CE routers having the same ASN do not accept routes from each other. Set neighborAsOverrideAf attribute on the PE router removes the CE neighbors ASN from the AS_PATH attribute allowing CE routers with the same ASN to accept routes from each other.

Attribute Name: neighbor-as-override

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</neighbor-as-override>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor as-override

Configure peer interface name

Interface name. Configures IP address or IPv6 address on interface

Attribute Name: peer-interface-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-interface-name>WORD</peer-interface-name>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) interface WORD

Configure peer description

Use this attribute to associate a description with a neighbor. This attribute helps in identifying a neighbor quickly. It is useful for an ISP that has multiple neighbor relationships.

Attribute Name: peer-description

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-description>LINE</peer-description>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor description LINE

Configure peer restart time

This attribute sets a different restart-time other than the global restart-time. This attribute takes precedence over the restart-time value specified using the graceful-restart-set attribute. The restart-time value is the maximum time that a graceful-restart neighbor waits to come back up after a restart. The default value is 120 seconds.

Attribute Name: peer-restart-time

Attribute Type: uint32

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-restart-time>1</peer-restart-time>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor restart-time <1-3600>

Configure site origin identifier

Use this attribute to enable the site-of-origin (SOO) feature. If the customer AS is multi-homed to the ISP, this attribute ensures that the PE does not advertise the routes back to the same AS.

Attribute Name: site-origin-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<site-origin-identifier>AS:nn_or_IP:nn</site-origin-identifier>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor soo AS:nn_or_IP:nn

Configure graceful shut

Attribute Name: graceful-shut

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</graceful-shut>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor g-shut

Configure graceful shut timer

Use this attribute to configure the value of the graceful shutdown timer. After the timer expires, the BGP session initiated for graceful shutdown is shut down.

Attribute Name: graceful-shut-timer

Attribute Type: uint32

Attribute Range: 10-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<graceful-shut-timer>10</graceful-shut-timer>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor g-shut-timer <10-65535>

Configure bgp port

The BGP port number of a neighbor

Attribute Name: bgp-port

Attribute Type: uint16

Default Value: 179

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<bgp-port>0</bgp-port>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor port <0-65535>

Configure enable ext opt param len

Use this attribute for a specific peer to encode extended optional parameter length.

Attribute Name: enable-ext-opt-param-len

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</enable-ext-opt-param-len>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor extended-optional-param

Configure peer address

Adds additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send|disable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<additional-paths-mode>send-receive</additional-paths-mode>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor additional-paths (send-receive|receive|send|disable)

Configure vrf-peer additional-path-select-all

Attribute to select advertise additional path

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</additional-path-select-all>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor advertise additional-paths all

Configure vrf-peer additional-paths-best-select-count

Attribute to select best advertise additional path

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor advertise additional-paths best <2-3>

Configure tcp adjust mss

Use this attribute to set the BGP TCP MSS value of a neighbor.

Attribute Name: tcp-adjust-mss

Attribute Type: uint16

Attribute Range: 40-1440

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<tcp-adjust-mss>40</tcp-adjust-mss>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor tcp-mss <40-1440>

Configure enable peer bfd

Enable bidirectional forwarding detection (BFD) for the BGP peer

Attribute Name: enable-peer-bfd

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor fall-over bfd

Configure enable peer bfd multihop

Enable bidirectional forwarding detection (BFD) for the BGP peer with multihop

Attribute Name: enable-peer-bfd-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</enable-peer-bfd-multihop>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor fall-over bfd multihop

Configure activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</activate>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor activate

Configure de activate

Deactivate neighbor. This attribute disables the exchange of AF information with a neighboring router.

Attribute Name: de-activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</de-activate>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor de-activate

Configure default peer route map name

This attribute allows a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family.

Attribute Name: default-peer-route-map-name

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</default-peer-route-map-name>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor default-originate

Configure peer route map orig name

Attribute Name: peer-route-map-orig-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<peer-route-map-orig-name>WORD</peer-route-map-orig-name>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor default-originate route-map WORD

Configure weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor weight <0-65535>

Configure vrf-peer weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor weight <0-65535>

Configure peer route reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</peer-route-reflector>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor route-reflector-client

Configure peer remove private as

Attribute Name: peer-remove-private-as

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</peer-remove-private-as>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor remove-private-AS

Configure no send community

Attribute Name: no-send-community

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</no-send-community>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor send-community

Configure no send community type

This attribute specifies the type of community attribute to be sent to a BGP neighbor.

Attribute Name: no-send-community-type

Attribute Type: bits (both|standard|extended|large)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<no-send-community-type>both</no-send-community-type>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor send-community (both|standard|extended|large)

Configure neighbor attribute unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<neighbor-attribute-unchanged>14</neighbor-attribute-unchanged>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor attribute-unchanged

Configure vrf-peer neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<neighbor-attribute-unchanged>as-path</neighbor-attribute-unchanged>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor attribute-unchanged {as-path|next-hop|med}

Configure orf prefix capability

Attribute Name: orf-prefix-capability

Attribute Type: bits (both|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<orf-prefix-capability>both</orf-prefix-capability>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor capability orf prefix-list (both|receive|send)

Configure peer allow ebgp vpn

Attribute Name: peer-allow-ebgp-vpn

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</peer-allow-ebgp-vpn>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor allow-ebgp-vpn

Configure allow as number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<allow-as-number>1</allow-as-number>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor allowas-in <1-10>

Configure capability graceful restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

</capability-graceful-restart>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor capability graceful-restart

Configure mapped peer group tag af

BGP peer group name. Adds a neighbor to an existing peer group. Neighbors with the same update policies are grouped into peer groups. This facilitates the updates of various policies, such as distribute and filter lists. The peer group is then configured easily with any of the neighbor attributes. Any changes made to the peer group affect all members.

Attribute Name: mapped-peer-group-tag-af

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<mapped-peer-group-tag-af>WORD</mapped-peer-group-tag-af>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor (A.B.C.D|X:X::X:X) peer-group WORD

Configure unsuppress route map name

unsuppress map name. This attribute is used to selectively leak more-specific routes to a particular neighbor.

Attribute Name: unsuppress-route-map-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<unsuppress-route-map-name>WORD</unsuppress-route-map-name>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor unsuppress-map WORD

Configure hold time

Use this attribute to globally set or reset the holdtime values for all the neighbors.

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<keep-alive>0</keep-alive>

<hold-time>0</hold-time>

</config>

</timers>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor timers <0-65535> <0-65535>

Configure enabled

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

</enabled>

</config>

</ebgp-multihop>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor ebgp-multihop

Configure maximum hop count

Attribute Name: enabled

Attribute Type: empty

Attribute Name: maximum-hop-count

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<ebgp-multihop>

<maximum-hop-count>1</maximum-hop-count>

</enabled>

</config>

</ebgp-multihop>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor ebgp-multihop <1-255>

Configure prefix count

This attribute specifies number of prefixes that a BGP router is allowed to receive from a neighbor. When the maximum-prefix-warning attribute is not set and extra prefixes are received, the router ends the peering.

Attribute Name: prefix-count

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix>

</maximum-prefixes>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor maximum-prefix <1-4294967295>

Configure stop update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor maximum-prefix <1-4294967295> stop-update

Configure maximum prefix warning

This attribute when enabled only give warning message when limit is exceeded. When it is not set and extra prefixes are received, the router ends the peering.

Attribute Name: maximum-prefix-warning

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix-warning>

</maximum-prefix>

</maximum-prefixes>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor maximum-prefix <1-4294967295> warning-only

Configure threshold percentage

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

<threshold-percentage>1</threshold-percentage>

</maximum-prefix>

</maximum-prefixes>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor maximum-prefix <1-4294967295> <1-100>

Configure warning only

Throw warning if exceeds threshold-value

Attribute Name: warning-only

Attribute Type: uint8

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

<threshold-percentage>1</threshold-percentage>

</config>

</warning-only>

</maximum-prefix>

</maximum-prefixes>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor maximum-prefix <1-4294967295> <1-100> warning-only

Configure auth key encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>1</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor authentication-key (0|1) WORD

Configure password

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>2</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor authentication-key WORD

Configure access list identifier

Access List information

Attribute Name: access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<distribute-list-filters>

<distribute-list-filter>

<filter-direction>in</filter-direction>

<filter-direction>in</filter-direction>

</config>

<access-list-identifier>WORD</access-list-identifier>

</distribute-list-filter>

</distribute-list-filters>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor distribute-list WORD (in|out)

Configure as access list identifier

Attribute Name: as-access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<as-list-filters>

<as-list-filter>

<as-list-direction>in</as-list-direction>

<as-list-direction>in</as-list-direction>

</config>

<as-access-list-identifier>WORD</as-access-list-identifier>

</as-list-filter>

</as-list-filters>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor filter-list WORD (in|out)

Configure prefix list name

This attribute specify a prefix list for filtering BGP advertisements for specified address-family. Filtering by prefix list matches the prefixes of routes with those listed in the prefix list. If there is a match, the route is used. An empty prefix list permits all prefixes. If a given prefix does not match any entries of a prefix list, the route is denied access. When multiple entries of a prefix list match a prefix, the entry with the smallest sequence number is considered to be a real match.The router begins the search at the top of the prefix list, with the sequence number 1. Once a match or deny occurs, the router does not need to go through the rest of the prefix list. For efficiency the most common matches or denies are listed at the top.

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<prefix-list-filters>

<prefix-list-filter>

<prefix-filter-direction>in</prefix-filter-direction>

<prefix-filter-direction>in</prefix-filter-direction>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix-list-filter>

</prefix-list-filters>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor prefix-list WORD (in|out)

Configure route map name

Attribute Name: route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<route-map-filters>

<route-map-filter>

<route-map-direction>in</route-map-direction>

<route-map-direction>in</route-map-direction>

</config>

<route-map-name>WORD</route-map-name>

</route-map-filter>

</route-map-filters>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor route-map WORD (in|out)

Configure peer local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</config>

</local-as-list>

</local-as>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor local-as <1-4294967295>

Configure no prepend local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: no-prepend-local-as

Attribute Type: empty

Attribute Name: replace-local-as

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<vrf-peers>

<vrf-peer>

<peer-address>CML_IP_ADDR_T</peer-address>

<peer-address>CML_IP_ADDR_T</peer-address>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</no-prepend-local-as>

</replace-local-as>

</config>

</local-as-list>

</local-as>

</vrf-peer>

</vrf-peers>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor local-as <1-4294967295> (no-prepend|) (replace-as|)

Configure backdoor

network address with backdoor for address family

Attribute Name: backdoor

Attribute Type: uint8

Attribute Name: network-rmap-name

Attribute Type: string

Default Value: NULL

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<network-lists>

<network-list>

<local-network-prefix>A.B.C.D</local-network-prefix>

<local-network-prefix>BGP_IP_NETWORK_T</local-network-prefix>

<network-rmap-name>WORD</network-rmap-name>

</config>

</backdoor>

</network-list>

</network-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network (A.B.C.D | A.B.C.D/M) (route-map WORD|) (backdoor|)

Configure local network prefix

network address with backdoor for address family

Attribute Name: backdoor

Attribute Type: uint8

Attribute Name: network-rmap-name

Attribute Type: string

Default Value: NULL

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<network-lists>

<network-list>

<local-network-prefix>A.B.C.D</local-network-prefix>

<local-network-prefix>BGP_IP_NETWORK_T</local-network-prefix>

<network-rmap-name>WORD</network-rmap-name>

</config>

</backdoor>

</network-list>

</network-lists>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

network (X:X::X:X/M) (route-map WORD|) (backdoor|)

Configure peer group tag

Creates a peer group. Neighbors with the same update policies are grouped into peer groups. This facilitates the updates of various policies, such as distribute and filter lists. The peer group is then configured easily with any of the neighbor attributes. Any changes made to the peer group affect all members.

Attribute Name: peer-group-tag

Attribute Type: string

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-range>0</peer-group-range>

</config>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group

Configure peer group range

this attribute creates a Dynamic peer group for address family. IPv4/IPv6 prefix range Must be specified to create dynamic peer group.

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-group-range>A.B.C.D/M</peer-group-range>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group range A.B.C.D/M

Configure peer-group peer-group-range

this attribute creates a Dynamic peer group for address family. IPv4/IPv6 prefix range Must be specified to create dynamic peer group.

Attribute Name: peer-group-range

Attribute Type: union

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-group-range>(X:X::X:X/M)</peer-group-range>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD peer-group range (X:X::X:X/M)

Configure group limit

Use this attribute to specify max number of peers in a dynamic peer-group for address family

Attribute Name: group-limit

Attribute Type: uint16

Attribute Range: 1-512

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<group-limit>1</group-limit>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD limit <1-512>

Configure peer-group peer-as

Attribute Name: peer-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-as>1</peer-as>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remote-as <1-4294967295>

Configure peer-group source-identifier

Attribute Name: source-identifier

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<source-identifier>WORD</source-identifier>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD update-source WORD

Configure peer-group bgp-version

Attribute Name: bgp-version

Attribute Type: uint8

Default Value: 4

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-version>(4)</bgp-version>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD version (4)

Configure peer-group peer-connection-interval

Attribute Name: peer-connection-interval

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-connection-interval>1</peer-connection-interval>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers connect <1-65535>

Configure peer-group enforce-multihop

This attribute turns on the enforcement of eBGP neighbors perform multihop.

Attribute Name: enforce-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enforce-multihop>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD enforce-multihop

Configure peer shutdown description

Attribute Name: peer-shutdown

Attribute Type: uint8

Attribute Name: peer-shutdown-description

Attribute Type: string

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

<peer-shutdown-description>1</peer-shutdown-description>

</config>

</peer-shutdown>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD shutdown (description LINE|)

Configure peer-group neighbor-passive

Use this attribute to set a BGP neighbor as passive.

Attribute Name: neighbor-passive

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</neighbor-passive>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD passive

Configure peer-group disable-capability-negotiation

Attribute Name: disable-capability-negotiation

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</disable-capability-negotiation>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD dont-capability-negotiate

Configure peer-group enable-dynamic-capability

Attribute Name: enable-dynamic-capability

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-dynamic-capability>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability dynamic

Configure peer-group min-route-advertisement-interval

Attribute Name: min-route-advertisement-interval

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<min-route-advertisement-interval>0</min-route-advertisement-interval>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertisement-interval <0-65535>

Configure peer-group peer-as-origin-interval

Attribute Name: peer-as-origin-interval

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-as-origin-interval>1</peer-as-origin-interval>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD as-origination-interval <1-65535>

Configure peer-group neighbor-as-override

Attribute Name: neighbor-as-override

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</neighbor-as-override>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD as-override

Configure peer-group peer-description

Use this attribute to associate a description with a neighbor. This attribute helps in identifying a neighbor quickly. It is useful for an ISP that has multiple neighbor relationships.

Attribute Name: peer-description

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-description>LINE</peer-description>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD description LINE

Configure peer-group peer-restart-time

Attribute Name: peer-restart-time

Attribute Type: uint32

Attribute Range: 1-3600

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-restart-time>1</peer-restart-time>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD restart-time <1-3600>

Configure peer-group site-origin-identifier

Use this attribute to enable the site-of-origin (SOO) feature. If the customer AS is multi-homed to the ISP, this attribute ensures that the PE does not advertise the routes back to the same AS.

Attribute Name: site-origin-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<site-origin-identifier>AS:nn_or_IP:nn</site-origin-identifier>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD soo AS:nn_or_IP:nn

Configure peer-group graceful-shut

Attribute Name: graceful-shut

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</graceful-shut>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut

Configure peer-group graceful-shut-timer

Use this attribute to configure the value of the graceful shutdown timer. After the timer expires, the BGP session initiated for graceful shutdown is shut down.

Attribute Name: graceful-shut-timer

Attribute Type: uint32

Attribute Range: 10-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<graceful-shut-timer>10</graceful-shut-timer>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD g-shut-timer <10-65535>

Configure peer-group bgp-port

The BGP port number of a neighbor

Attribute Name: bgp-port

Attribute Type: uint16

Default Value: 179

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-port>0</bgp-port>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD port <0-65535>

Configure peer-group enable-ext-opt-param-len

Use this attribute for a specific peer to encode extended optional parameter length.

Attribute Name: enable-ext-opt-param-len

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-ext-opt-param-len>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD extended-optional-param

Configure peer-group additional-paths-mode

Adds additional paths in the BGP table

Attribute Name: additional-paths-mode

Attribute Type: bits (send-receive|receive|send|disable)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<additional-paths-mode>send-receive</additional-paths-mode>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD additional-paths (send-receive|receive|send|disable)

Configure peer-group additional-path-select-all

Attribute to select advertise additional path

Attribute Name: additional-path-select-all

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</additional-path-select-all>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertise additional-paths all

Configure peer-group additional-paths-best-select-count

Attribute to select best advertise additional path

Attribute Name: additional-paths-best-select-count

Attribute Type: uint8

Attribute Range: 2-3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<additional-paths-best-select-count>2</additional-paths-best-select-count>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD advertise additional-paths best <2-3>

Configure peer-group tcp-adjust-mss

Use this attribute to set the BGP TCP MSS value of a neighbor.

Attribute Name: tcp-adjust-mss

Attribute Type: uint16

Attribute Range: 40-1440

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<tcp-adjust-mss>40</tcp-adjust-mss>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD tcp-mss <40-1440>

Configure peer-group enable-peer-bfd

Enable bidirectional forwarding detection (BFD) for the BGP peer

Attribute Name: enable-peer-bfd

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-peer-bfd>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd

Configure peer-group enable-peer-bfd-multihop

Enable bidirectional forwarding detection (BFD) for the BGP peer with multihop

Attribute Name: enable-peer-bfd-multihop

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</enable-peer-bfd-multihop>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD fall-over bfd multihop

Configure peer-group activate

Activate/Deactivate neighbor. This attribute enables or disables the exchange of AF information with a neighboring router.

Attribute Name: activate

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</activate>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD activate

Configure peer-group default-peer-route-map-name

This attribute allows a BGP local router to send the default route 0.0.0.0 to a neighbor for use as a default route for specified address-family.

Attribute Name: default-peer-route-map-name

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</default-peer-route-map-name>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD default-originate

Configure peer-group peer-route-map-orig-name

Attribute Name: peer-route-map-orig-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<peer-route-map-orig-name>WORD</peer-route-map-orig-name>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD default-originate route-map WORD

Configure peer-group weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD weight <0-65535>

Configure peer-group weight

Attribute Name: weight

Attribute Type: uint16

Default Value: 0

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD weight <0-65535>

Configure peer-group peer-route-reflector

Attribute Name: peer-route-reflector

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</peer-route-reflector>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-reflector-client

Configure peer-group peer-remove-private-as

Attribute Name: peer-remove-private-as

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</peer-remove-private-as>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD remove-private-AS

Configure peer-group no-send-community

Attribute Name: no-send-community

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</no-send-community>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor WORD send-community

Configure peer-group no-send-community-type

This attribute specifies the type of community attribute to be sent to a BGP neighbor.

Attribute Name: no-send-community-type

Attribute Type: bits (both|standard|extended|large)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<no-send-community-type>both</no-send-community-type>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

no neighbor WORD send-community (both|standard|extended|large)

Configure peer-group neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<neighbor-attribute-unchanged>14</neighbor-attribute-unchanged>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged

Configure peer-group neighbor-attribute-unchanged

This attribute advertises unchanged BGP AS path, next hop and med to the specified neighbor.

Attribute Name: neighbor-attribute-unchanged

Attribute Type: bits (as-path|next-hop|med)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<neighbor-attribute-unchanged>as-path</neighbor-attribute-unchanged>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD attribute-unchanged {as-path|next-hop|med}

Configure peer-group orf-prefix-capability

Attribute Name: orf-prefix-capability

Attribute Type: bits (both|receive|send)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<orf-prefix-capability>both</orf-prefix-capability>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability orf prefix-list (both|receive|send)

Configure peer-group peer-allow-ebgp-vpn

Attribute Name: peer-allow-ebgp-vpn

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</peer-allow-ebgp-vpn>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allow-ebgp-vpn

Configure peer-group allow-as-number

Attribute Name: allow-as-number

Attribute Type: uint32

Default Value: 3

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<allow-as-number>1</allow-as-number>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD allowas-in <1-10>

Configure peer-group capability-graceful-restart

Attribute Name: capability-graceful-restart

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

</capability-graceful-restart>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD capability graceful-restart

Configure peer-group unsuppress-route-map-name

unsuppress map name. This attribute is used to selectively leak more-specific routes to a particular neighbor.

Attribute Name: unsuppress-route-map-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<unsuppress-route-map-name>WORD</unsuppress-route-map-name>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD unsuppress-map WORD

Configure optional as

Use this attribute to specify optional AS for BGP dynamic peer-group

Attribute Name: optional-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<optional-as-lists>

<optional-as-list>

<optional-as>1</optional-as>

<optional-as>1</optional-as>

</config>

</optional-as-list>

</optional-as-lists>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD optional-as <1-4294967295>

Configure bgp-password auth-key-encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>1</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key (0|1) WORD

Configure bgp-password auth-key-encrypt

Use this attribute to configure the authentication key to specify if the password is to be encrypted or not.

Attribute Name: auth-key-encrypt

Attribute Type: enum (0|1)

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<bgp-passwords>

<bgp-password>

</config>

<auth-key-encrypt>2</auth-key-encrypt>

</bgp-password>

</bgp-passwords>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD authentication-key WORD

Configure keep alive

Use this attribute to globally set or reset the holdtime values for all the neighbors.

Attribute Name: hold-time

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: keep-alive

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<keep-alive>0</keep-alive>

<hold-time>0</hold-time>

</config>

</timers>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD timers <0-65535> <0-65535>

Configure local-as peer-local-as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</config>

</local-as-list>

</local-as>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295>

Configure replace local as

Specifies an AS (autonomous system) number to use with BGP neighbor.

Attribute Name: peer-local-as

Attribute Type: uint32

Attribute Range: 1-4294967295

Attribute Name: no-prepend-local-as

Attribute Type: empty

Attribute Name: replace-local-as

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<local-as>

<local-as-list>

<peer-local-as>1</peer-local-as>

<peer-local-as>1</peer-local-as>

</no-prepend-local-as>

</replace-local-as>

</config>

</local-as-list>

</local-as>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD local-as <1-4294967295> (no-prepend|) (replace-as|)

Configure ebgp-multihop enabled

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<ebgp-multihop>

</enabled>

</config>

</ebgp-multihop>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop

Configure ebgp-multihop enabled

Attribute Name: enabled

Attribute Type: empty

Attribute Name: maximum-hop-count

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<ebgp-multihop>

<maximum-hop-count>1</maximum-hop-count>

</enabled>

</config>

</ebgp-multihop>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD ebgp-multihop <1-255>

Configure maximum-prefixes prefix-count

Attribute Name: prefix-count

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix>

</maximum-prefixes>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295>

Configure maximum-prefix stop-update

Stop installing the routes when limit is exceeded.

Attribute Name: stop-update

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</stop-update>

</maximum-prefix>

</maximum-prefixes>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> stop-update

Configure maximum-prefix maximum-prefix-warning

This attribute when enabled only give warning message when limit is exceeded. When it is not set and extra prefixes are received, the router ends the peering.

Attribute Name: maximum-prefix-warning

Attribute Type: uint8

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

</maximum-prefix-warning>

</maximum-prefix>

</maximum-prefixes>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> warning-only

Configure maximum-prefix threshold-percentage

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

</config>

<threshold-percentage>1</threshold-percentage>

</maximum-prefix>

</maximum-prefixes>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100>

Configure maximum-prefix warning-only

Throw warning if exceeds threshold-value

Attribute Name: warning-only

Attribute Type: uint8

Attribute Name: threshold-percentage

Attribute Type: uint8

Default Value: 75

Attribute Range: 1-100

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<maximum-prefixes>

<maximum-prefix>

<prefix-count>1</prefix-count>

<prefix-count>1</prefix-count>

<threshold-percentage>1</threshold-percentage>

</config>

</warning-only>

</maximum-prefix>

</maximum-prefixes>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD maximum-prefix <1-4294967295> <1-100> warning-only

Configure filter direction

Access List information

Attribute Name: access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<distribute-list-filters>

<distribute-list-filter>

<filter-direction>in</filter-direction>

<filter-direction>in</filter-direction>

</config>

<access-list-identifier>WORD</access-list-identifier>

</distribute-list-filter>

</distribute-list-filters>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD distribute-list WORD (in|out)

Configure as list direction

Attribute Name: as-access-list-identifier

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<as-list-filters>

<as-list-filter>

<as-list-direction>in</as-list-direction>

<as-list-direction>in</as-list-direction>

</config>

<as-access-list-identifier>WORD</as-access-list-identifier>

</as-list-filter>

</as-list-filters>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD filter-list WORD (in|out)

Configure prefix filter direction

This attribute specify a prefix list for filtering BGP advertisements for specified address-family. Filtering by prefix list matches the prefixes of routes with those listed in the prefix list. If there is a match, the route is used. An empty prefix list permits all prefixes. If a given prefix does not match any entries of a prefix list, the route is denied access. When multiple entries of a prefix list match a prefix, the entry with the smallest sequence number is considered to be a real match.The router begins the search at the top of the prefix list, with the sequence number 1. Once a match or deny occurs, the router does not need to go through the rest of the prefix list. For efficiency the most common matches or denies are listed at the top.

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<prefix-list-filters>

<prefix-list-filter>

<prefix-filter-direction>in</prefix-filter-direction>

<prefix-filter-direction>in</prefix-filter-direction>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix-list-filter>

</prefix-list-filters>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD prefix-list WORD (in|out)

Configure route map direction

Attribute Name: route-map-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<bgp-instances>

<bgp-instance>

<bgp-as>1</bgp-as>

<bgp-as>1</bgp-as>

</config>

<address-family-vrfs>

<address-family-vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

<safi>unicast</safi>

</config>

<safi>unicast</safi>

<peer-groups>

<peer-group>

<peer-group-tag>WORD</peer-group-tag>

<peer-group-tag>WORD</peer-group-tag>

</config>

<route-map-filters>

<route-map-filter>

<route-map-direction>in</route-map-direction>

<route-map-direction>in</route-map-direction>

</config>

<route-map-name>WORD</route-map-name>

</route-map-filter>

</route-map-filters>

</peer-group>

</peer-groups>

</address-family-vrf>

</address-family-vrfs>

</bgp-instance>

</bgp-instances>

</bgp>

Command Syntax

neighbor WORD route-map WORD (in|out)

clear ip bgp all vrf (VRFNAME|all|default) (description LINE|)

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: peer-reset-description

Attribute Type: string

Attribute Range: 1-255

Netconf RPC payload

<ipi-bgp-address-family-vrf_clear-ip-bgp-all-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<vrf-name>VRFNAME</vrf-name>

<peer-reset-description>1</peer-reset-description>

</ipi-bgp-address-family-vrf_clear-ip-bgp-all-vrf>

Command Syntax

clear ip bgp all vrf (VRFNAME|all|default) (description LINE|)

clear ip bgp vrf WORD (A.B.C.D|X:X::X:X|WORD|WORD) (description LINE|)

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: address

Attribute Type: union

Attribute Name: peer-reset-description

Attribute Type: string

Attribute Range: 1-255

Netconf RPC payload

<ipi-bgp-address-family-vrf_clear-ip-bgp-vrf-peer xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp">

<vrf-name>WORD</vrf-name>

<address>BGP_HOSTNAME_T</address>

<peer-reset-description>1</peer-reset-description>

</ipi-bgp-address-family-vrf_clear-ip-bgp-vrf-peer>

Command Syntax

clear ip bgp vrf WORD (A.B.C.D|X:X::X:X|WORD|WORD) (description LINE|)

IPI-BGP-VRF

Configure rd string

Use this attribute to assign a route distinguisher (RD) for the VRF. The route distinguisher value must be a unique value on the router.This attribute creates routing and forwarding tables and specifies the default RD for a VPN. The RD is added to the customers IPv4 prefixes, changing them into globally unique VPN-IPv4 prefixes.

Attribute Name: rd-string

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<bgp-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp-vrf">

<rd-string>ASN:nn_or_IP-address:nn</rd-string>

</config>

</bgp-vrf>

</vrf>

</network-instance>

</network-instances>

Command Syntax

rd ASN:nn_or_IP-address:nn

Configure import map

This attribute assigns a route map to the VRF. This map is applied for routing information imported from another PE or VRF. Use this attribute when an application requires finer control over the routes imported into a VRF than provided by the import and export extended communities. You can filter routes that are eligible for import into a VRF through the use of a route map.The route map can deny access to selected routes from a community that is on the import list.

Attribute Name: import-map

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<bgp-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp-vrf">

<import-map>WORD</import-map>

</config>

</bgp-vrf>

</vrf>

</network-instance>

</network-instances>

Command Syntax

import map WORD

Configure export map

export map name

Attribute Name: export-map

Attribute Type: string

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<bgp-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp-vrf">

<export-map>WORD</export-map>

</config>

</bgp-vrf>

</vrf>

</network-instance>

</network-instances>

Command Syntax

export map WORD

Configure direction

Use this attribute to add a list of import and export route-target extended communities to the VRF. This attribute creates lists of import and export route-target extended communities for the VRF. It specifies a target VPN extended community. All routes with the specific route-target extended community are imported into all VRFs with the same extended community as an import route-target.

Attribute Name: direction

Attribute Type: bits (import|export|both)

Netconf edit-config payload

<network-instances xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-instance">

<network-instance>

<instance-name>WORD</instance-name>

<instance-name>WORD</instance-name>

<instance-type>vrf</instance-type>

</config>

<instance-type>vrf</instance-type>

<bgp-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bgp-vrf">

<route-targets>

<route-target>

<rt-rd-string>BGP_ROUTE_TARGET_TYPE_T</rt-rd-string>

<rt-rd-string>BGP_ROUTE_TARGET_TYPE_T</rt-rd-string>

</config>

<direction>import</direction>

</route-target>

</route-targets>

</bgp-vrf>

</vrf>

</network-instance>

</network-instances>

Command Syntax

route-target (import|export|both) (ASN:nn_or_IP-address:nn|evpn-auto-rt)

IPI-BFD

Configure notification enabled

Use this attribute to enable or disable BFD SNMP notification.

Attribute Name: notification-enabled

Attribute Type: boolean

Default Value: false

Netconf edit-config payload

<notification-enabled>true</notification-enabled>

</config>

</global>

</bfd>

Command Syntax

bfd notification (disable|enable)

Configure echo mode enabled

This leaf exists when echo mode is running between the local and remote system. When it does not exist, solely asynchronous mode is active.

Attribute Name: echo-mode-enabled

Attribute Type: empty

Netconf edit-config payload

</echo-mode-enabled>

</config>

</global>

</bfd>

Command Syntax

bfd echo

Configure slow tx interval

Use this command to set a BFD slow timer interval.

Attribute Name: slow-tx-interval

Attribute Type: uint32

Default Value: 2000

Attribute Range: 1000-30000

Netconf edit-config payload

<slow-tx-interval>1000</slow-tx-interval>

</config>

</global>

</bfd>

Command Syntax

bfd slow-timer <1000-30000>

Configure detection multiplier

The number of packets that must be missed to declare this session as down. The detection interval for the BFD session is calculated by multiplying the value of the negotiated transmission interval by this value.

This command is supported when following feature are enabled BFD-MONO feature enabled

Attribute Name: detection-multiplier

Attribute Type: uint8

Attribute Range: 3-50

Netconf edit-config payload

<multihop-peer-intervals>

<multihop-peer-interval>

<detection-multiplier>3</detection-multiplier>

<detection-multiplier>3</detection-multiplier>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</config>

<required-minimum-rx-interval>50</required-minimum-rx-interval>

<desired-minimum-tx-interval>50</desired-minimum-tx-interval>

</multihop-peer-interval>

</multihop-peer-intervals>

</global>

</bfd>

Command Syntax

bfd multihop-peer-interval <50-999> minrx <50-999> multiplier <3-50>

Configure desired minimum tx interval

This command is supported when following feature are enabled BFD-MONO feature enabled

Attribute Name: detection-multiplier

Attribute Type: uint8

Attribute Range: 3-50

Netconf edit-config payload

<detection-multiplier>3</detection-multiplier>

<detection-multiplier>3</detection-multiplier>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</config>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</interval>

</intervals>

</global>

</bfd>

Command Syntax

bfd interval <3-999> minrx <3-999> multiplier <3-50>

Configure remote address

This command is supported when following feature are enabled BFD-MONO feature enabled

Attribute Name: detection-multiplier

Attribute Type: uint8

Attribute Range: 3-50

Netconf edit-config payload

<peers>

<peer>

<remote-address>A.B.C.D</remote-address>

<remote-address>A.B.C.D</remote-address>

</config>

<detection-multiplier>3</detection-multiplier>

<detection-multiplier>3</detection-multiplier>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</config>

<required-minimum-rx-interval>50</required-minimum-rx-interval>

<desired-minimum-tx-interval>50</desired-minimum-tx-interval>

</interval>

</intervals>

</peer>

</peers>

</bfd>

Command Syntax

bfd multihop-peer (A.B.C.D|X:X::X:X) interval <50-999> minrx <50-999> multiplier <3-50>

Configure key string

Use this attribute to specify the key authentication string

Attribute Name: key-string

Attribute Type: string

Attribute Name: key-type

Attribute Type: enum (simple|keyed-sha1|meticulous-keyed-sha1)

Attribute Name: key-id

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: key-encrypted

Attribute Type: enum (0|1)

Netconf edit-config payload

<peers>

<peer>

<remote-address>A.B.C.D</remote-address>

<remote-address>A.B.C.D</remote-address>

</config>

<key-type>simple</key-type>

<key-id>0</key-id>

<key-encrypted>0</key-encrypted>

<key-string>WORD</key-string>

</config>

</authentication>

</peer>

</peers>

</bfd>

Command Syntax

bfd multihop-peer (A.B.C.D|X:X::X:X) auth type (simple|keyed-sha1|meticulous-keyed-sha1) key-id <0-255> (0|1) key WORD

Configure options

Use this attribute to debug the oamd process.

Attribute Name: options

Netconf edit-config payload

<debug>

<options>events</options>

</config>

</debug>

</bfd>

Command Syntax

snmp restart bfd

Netconf RPC payload

<bfd-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bfd"/>

Command Syntax

snmp restart bfd

Attribute Name: terminal-debug-options

Netconf RPC payload

<bfd-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bfd">

<terminal-debug-options>events</terminal-debug-options>

</bfd-terminal-debug-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<bfd-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-bfd">

<terminal-debug-options>events</terminal-debug-options>

</bfd-terminal-debug-off>

Command Syntax

IPI-BFD-INTERFACE

Configure bfd disabled

Use this attribute to enable or disable all the BFD sessions on this interface.

Attribute Name: bfd-disabled

Attribute Type: uint8

Netconf edit-config payload

</config>

</bfd-disabled>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd disable

Configure bfd session type

Use this attribute to offload Single HOP BFD sessions to software or hardware.

Attribute Name: bfd-session-type

Attribute Type: enum (hardware|software)

Netconf edit-config payload

</config>

<bfd-session-type>hardware</bfd-session-type>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd session (hardware|software)

Configure detection multiplier

This command is supported when following feature are enabled BFD-MONO feature enabled

Attribute Name: detection-multiplier

Attribute Type: uint8

Attribute Range: 3-50

Netconf edit-config payload

</config>

<detection-multiplier>3</detection-multiplier>

<detection-multiplier>3</detection-multiplier>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</config>

<required-minimum-rx-interval>3</required-minimum-rx-interval>

<desired-minimum-tx-interval>3</desired-minimum-tx-interval>

</interval>

</intervals>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd interval <3-999> minrx <3-999> multiplier <3-50>

Configure ipv4 source

Use this attribute to configure BFD echo packet IPv4 source address

Attribute Name: ipv4-source

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

<echo>

<ipv4-source>A.B.C.D</ipv4-source>

</config>

</echo>

</interface>

</interfaces>

</bfd>

Command Syntax

echo ipv4 source A.B.C.D

Configure name

Use this attribute to configure BFD echo packet IPv4 source address

Attribute Name: ipv4-source

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

<echo>

<ipv4-source>A.B.C.D</ipv4-source>

</config>

</echo>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd echo ipv4 source A.B.C.D

Configure required minimum tx interval

Use this attribute to configure BFD echo packet transmission interval, in milliseconds

Attribute Name: required-minimum-tx-interval

Attribute Type: uint32

Attribute Range: 50-4294967

Netconf edit-config payload

</config>

<echo>

<required-minimum-tx-interval>50</required-minimum-tx-interval>

</config>

</echo>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd echo interval <50-4294967>

Configure key string

Use this attribute to specify the key authentication string

Attribute Name: key-string

Attribute Type: string

Attribute Name: key-type

Attribute Type: enum (simple|keyed-sha1|meticulous-keyed-sha1)

Attribute Name: key-id

Attribute Type: uint32

Attribute Range: 0-255

Attribute Name: key-encrypted

Attribute Type: enum (0|1)

Netconf edit-config payload

</config>

<key-type>simple</key-type>

<key-id>0</key-id>

<key-encrypted>0</key-encrypted>

<key-string>WORD</key-string>

</config>

</authentication>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd auth type (simple|keyed-sha1|meticulous-keyed-sha1) key-id <0-255> (0|1) key WORD

Configure session type

BFD session type

Attribute Name: session-type

Attribute Type: enum (singlehop|multihop)

Netconf edit-config payload

</config>

<session-type>singlehop</session-type>

<session-type>singlehop</session-type>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</config>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</session>

</sessions>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd session (A.B.C.D|X:X::X:X) (A.B.C.D|X:X::X:X) (multihop|)

Configure administrative down

BFD administrative down session

Attribute Name: administrative-down

Attribute Type: empty

Netconf edit-config payload

</config>

<session-type>singlehop</session-type>

<session-type>singlehop</session-type>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</config>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</administrative-down>

</session>

</sessions>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd session (A.B.C.D|X:X::X:X) (A.B.C.D|X:X::X:X) (multihop|) admin-down

Configure non persistent

BFD non persistent session

Attribute Name: non-persistent

Attribute Type: empty

Netconf edit-config payload

</config>

<session-type>singlehop</session-type>

<session-type>singlehop</session-type>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</config>

<remote-address>A.B.C.D</remote-address>

<local-address>A.B.C.D</local-address>

</non-persistent>

</session>

</sessions>

</interface>

</interfaces>

</bfd>

Command Syntax

bfd session (A.B.C.D|X:X::X:X) (A.B.C.D|X:X::X:X) (multihop|) non-persistent

IPI-VRRP

Configure disable virtual router mac address

Use this attribute to enable or disable Virtual MAC (VMAC). This affects all VRRP groups in a router. On a single network segment, multiple VRRP groups can be configured, each using a different VMAC. The use of VMAC addressing allows for faster switchover when a backup router assumes the master role. When this attribute is used to enable a VMAC, the virtual router forwards packets with a special-purpose multicast VMAC address (0:0:5e:0:01:VR_ID). Otherwise, it forwards with interface physical address.The VMAC address is assigned to a router interface at the time the VRRP group is enabled in the router.

Attribute Name: disable-virtual-router-mac-address

Attribute Type: empty

Netconf edit-config payload

</disable-virtual-router-mac-address>

</config>

</global>

</vrrp>

Command Syntax

vrrp vmac disable

Configure vrrp v2 compatible

Use this attribute to enable or disable backward-compatibility feature. When enabled, both VRRPv3 and VRRPv2 interoperation are supported.

Attribute Name: vrrp-v2-compatible

Attribute Type: empty

Netconf edit-config payload

</vrrp-v2-compatible>

</config>

</global>

</vrrp>

Command Syntax

vrrp compatible-v2 enable

Configure ipv4 exclude pseudo header

This command excludes the pseudo-header in IPv4 VRRPv3 checksum calculation on the VRRP group

Attribute Name: ipv4-exclude-pseudo-header

Attribute Type: empty

Netconf edit-config payload

</ipv4-exclude-pseudo-header>

</config>

</global>

</vrrp>

Command Syntax

vrrp ipv4-exclude-pseudo-header enable

Configure options

use this attribute to specify debugging options for VRRP

Attribute Name: options

Attribute Type: bits (all|packet|events|packet send|packet recv)

Netconf edit-config payload

<debug>

</config>

</debug>

</vrrp>

Command Syntax

debug vrrp

Configure debug options

use this attribute to specify debugging options for VRRP

Attribute Name: options

Attribute Type: bits (all|packet|events|packet send|packet recv)

Netconf edit-config payload

<debug>

</config>

</debug>

</vrrp>

Command Syntax

debug vrrp (all|packet|events|packet send|packet recv)

Configure interface name

Use this attribute to configure an VRRP routing process for an interface.

Attribute Name: interface-name

Attribute Type: string

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

router vrrp <1-255> IFNAME

Configure disable preempt mode

Use this attribute to configure preempt mode. If set to true, the highest priority backup is always the master when the default master is unavailable. If set to false, a higher priority backup does not preempt a lower priority backup which is acting as master

Attribute Name: disable-preempt-mode

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</disable-preempt-mode>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

preempt-mode false

Configure disable accept mode

Use this attribute to enable accept mode for the session

Attribute Name: disable-accept-mode

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</disable-accept-mode>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

accept-mode false

Configure virtual router id

Use this attribute to enable or disable the backward-compatibility feature

Attribute Name: vrrp-v2-compatible

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</vrrp-v2-compatible>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

v2-compatible

Configure interface ipv4-exclude-pseudo-header

Use this attribute to excludes the pseudo-header in IPv4 VRRPv3 checksum calculation

Attribute Name: ipv4-exclude-pseudo-header

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</ipv4-exclude-pseudo-header>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

ipv4-exclude-pseudo-header

Configure authentication data

Use this attribute to include authentication simple text

Attribute Name: authentication-data

Attribute Type: string

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<authentication-data>TEXT-STRING</authentication-data>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

authentication text TEXT-STRING

Configure primary ip address

Use this attribute to set the operational-ip address for the virtual router

Attribute Name: primary-ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<primary-ip-address>A.B.C.D</primary-ip-address>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

operational-ip A.B.C.D

Configure mlag active standby

Use this attribute to set active-standby mlag mode

Attribute Name: mlag-active-standby

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</mlag-active-standby>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

mlag active-standby

Configure priority

Use this attribute to configure the VRRP router priority within the virtual router. Priority determines the role that each VRRP router plays and what happens if the master virtual router fails. If a VRRP router owns the IP address of the virtual router and the IP address of the physical interface, this router functions as the master virtual router

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 1-254

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

priority <1-254>

Configure preempt delay

Use this attribute to set a switch-back delay timer for the master VRRP router. This feature prevents the original master VRRP router from transitioning back to the master state after coming back online until the configured delay timer has expired.

Attribute Name: preempt-delay

Attribute Type: uint32

Attribute Range: 1-500000

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<preempt-delay>1</preempt-delay>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

switch-back-delay <1-500000>

Configure advertisement interval

Use this attribute to configure the advertisement interval of a virtual router. This is the length of time, in seconds, between each advertisement sent from the master to its backup(s). The master virtual router sends VRRP advertisements to other VRRP routers in the same group. The advertisements communicate the priority and state of the master virtual router. The VRRP advertisements are encapsulated in IP packets and sent to the multicast address assigned to the VRRP group (224.0.0.18). Advertisements are sent every second by default.

Attribute Name: advertisement-interval

Attribute Type: uint16

Default Value: 100

Attribute Range: 5-4095

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<advertisement-interval>5</advertisement-interval>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

advertisement-interval <5-4095>

Configure enable

Use this attribute to enable a VRRP session on the router (to make it participate in virtual routing). To make any changes to the VRRP configuration, first disable the router from participating in virtual routing using the disable command

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<protocol-enable>

</enable>

</config>

</protocol-enable>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

enable

Configure ip address owner

Use this attribute to set the virtual IP address for the VRRP virtual router as VRRP Owner. This is the IP address used by end hosts to address their default gateway.

Attribute Name: ip-address-owner

Attribute Type: boolean

Attribute Name: virtual-ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<virtual-ip>

<virtual-ip-address>A.B.C.D</virtual-ip-address>

<ip-address-owner>true</ip-address-owner>

</config>

</virtual-ip>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

virtual-ip A.B.C.D (owner|)

Configure interface tracking name

Use this command to enable the VRRP circuit failover feature.

Attribute Name: interface-tracking-name

Attribute Type: string

Attribute Name: priority-decrement

Attribute Type: uint8

Attribute Range: 1-253

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<interfaces-tracking>

<interface-tracking>

<interface-tracking-name>IFNAME</interface-tracking-name>

<interface-tracking-name>WORD</interface-tracking-name>

<priority-decrement>1</priority-decrement>

</config>

</interface-tracking>

</interfaces-tracking>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

circuit-failover IFNAME <1-253>

Configure tracking id

Use this command to enable the VRRP object tracking feature.

This command is supported when following feature are enabled HAVE_OBJ_TRACKING

Attribute Name: tracking-id

Attribute Type: uint16

Attribute Name: decrement

Attribute Type: uint8

Attribute Range: 1-253

Netconf edit-config payload

<ipv4-instances>

<ipv4-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<objects-tracking>

<tracking-id>0</tracking-id>

<tracking-id>1</tracking-id>

</config>

</object-tracking>

</objects-tracking>

</interface>

</interfaces>

</ipv4-instance>

</ipv4-instances>

</vrrp>

Command Syntax

track <0-65535> decrement <1-253>

Configure interfaces interface-name

Use this attribute to configure an VRRP routing process for an interface.

Attribute Name: interface-name

Attribute Type: string

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

router ipv6 vrrp <1-255> IFNAME

Configure interface disable-preempt-mode

Attribute Name: disable-preempt-mode

Attribute Type: empty

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</disable-preempt-mode>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

preempt-mode false

Configure interface disable-accept-mode

Use this attribute to enable accept mode for the session

Attribute Name: disable-accept-mode

Attribute Type: empty

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</disable-accept-mode>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

accept-mode false

Configure interface primary-ip-address

Use this attribute to set the operational-ip address for the virtual router

Attribute Name: primary-ip-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<primary-ip-address>X:X::X:X</primary-ip-address>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

operational-ipv6 X:X::X:X

Configure interface priority

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 1-254

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

priority <1-254>

Configure interface preempt-delay

Attribute Name: preempt-delay

Attribute Type: uint32

Attribute Range: 1-500000

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<preempt-delay>1</preempt-delay>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

switch-back-delay <1-500000>

Configure interface advertisement-interval

Attribute Name: advertisement-interval

Attribute Type: uint16

Default Value: 100

Attribute Range: 5-4095

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<advertisement-interval>5</advertisement-interval>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

advertisement-interval <5-4095>

Configure protocol-enable enable

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<protocol-enable>

</enable>

</config>

</protocol-enable>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

enable

Configure virtual ip address

VRRP Virtual IPV6 address

This command is supported when following feature are enabled IPV6 feature

Attribute Name: virtual-ip-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<virtual-ip-addresses>

<virtual-ip-address>

<virtual-ip-address>X:X::X:X</virtual-ip-address>

<virtual-ip-address>X:X::X:X</virtual-ip-address>

</config>

</virtual-ip-address>

</virtual-ip-addresses>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

virtual-ipv6 X:X::X:X

Configure virtual-ip-address ip-address-owner

Use this attribute to set the virtual IP address for the VRRP virtual router as VRRP Owner. This is the IP address used by end hosts to address their default gateway.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ip-address-owner

Attribute Type: boolean

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<virtual-ip-addresses>

<virtual-ip-address>

<virtual-ip-address>X:X::X:X</virtual-ip-address>

<virtual-ip-address>X:X::X:X</virtual-ip-address>

</config>

<ip-address-owner>true</ip-address-owner>

</virtual-ip-address>

</virtual-ip-addresses>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

virtual-ipv6 X:X::X:X (owner|)

Configure priority decrement

Use this command to enable the VRRP circuit failover feature.

Attribute Name: interface-tracking-name

Attribute Type: string

Attribute Name: priority-decrement

Attribute Type: uint8

Attribute Range: 1-253

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<interfaces-tracking>

<interface-tracking>

<interface-tracking-name>IFNAME</interface-tracking-name>

<interface-tracking-name>WORD</interface-tracking-name>

<priority-decrement>1</priority-decrement>

</config>

</interface-tracking>

</interfaces-tracking>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

circuit-failover IFNAME <1-253>

Configure decrement

Use this command to enable the VRRP object tracking feature.

This command is supported when following feature are enabled HAVE_OBJ_TRACKING

Attribute Name: tracking-id

Attribute Type: uint16

Attribute Name: decrement

Attribute Type: uint8

Attribute Range: 1-253

Netconf edit-config payload

<ipv6-instances>

<ipv6-instance>

<virtual-router-id>1</virtual-router-id>

<virtual-router-id>1</virtual-router-id>

</config>

<interface-name>IFNAME</interface-name>

<interface-name>WORD</interface-name>

</config>

<objects-tracking>

<tracking-id>0</tracking-id>

<tracking-id>1</tracking-id>

</config>

</object-tracking>

</objects-tracking>

</interface>

</interfaces>

</ipv6-instance>

</ipv6-instances>

</vrrp>

Command Syntax

track <0-65535> decrement <1-253>

snmp restart vrrp

Netconf RPC payload

<vrrp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

snmp restart vrrp

clear vrrp global statistics

Netconf RPC payload

<vrrp-clear-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

clear vrrp global statistics

clear vrrp ipv4 statistics

Netconf RPC payload

<vrrp-clear-ipv4-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

clear vrrp ipv4 statistics

clear vrrp ipv6 statistics

Netconf RPC payload

<vrrp-clear-ipv6-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

clear vrrp ipv6 statistics

clear vrrp ipv4 statistics <1-255> IFNAME

Attribute Name: vrrp-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<vrrp-clear-session-ipv4-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp">

<vrrp-id>1</vrrp-id>

<interface-name>IFNAME</interface-name>

</vrrp-clear-session-ipv4-statistics>

Command Syntax

clear vrrp ipv4 statistics <1-255> IFNAME

clear vrrp ipv6 statistics <1-255> IFNAME

Attribute Name: vrrp-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<vrrp-clear-session-ipv6-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp">

<vrrp-id>1</vrrp-id>

<interface-name>IFNAME</interface-name>

</vrrp-clear-session-ipv6-statistics>

Command Syntax

clear vrrp ipv6 statistics <1-255> IFNAME

debug vrrp

Netconf RPC payload

<vrrp-terminal-debug-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

debug vrrp

no debug vrrp

Netconf RPC payload

<vrrp-terminal-debug-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp"/>

Command Syntax

no debug vrrp

debug vrrp (all|packet|events|packet send|packet recv)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|packet|events|packet send|packet recv)

Netconf RPC payload

<vrrp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp">

<terminal-debug-options>all</terminal-debug-options>

</vrrp-terminal-debug-on>

Command Syntax

debug vrrp (all|packet|events|packet send|packet recv)

no debug vrrp (all|packet|events|packet send|packet recv)

Attribute Name: terminal-debug-options

Attribute Type: bits (all|packet|events|packet send|packet recv)

Netconf RPC payload

<vrrp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vrrp">

<terminal-debug-options>all</terminal-debug-options>

</vrrp-terminal-debug-off>

Command Syntax

no debug vrrp (all|packet|events|packet send|packet recv)

IPI-PREFIX-LIST

Configure prefix list name

prefix-list name

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix>

</prefixes>

Command Syntax

ip prefix-list WORD

Configure prefix list type

prefix-list name

Attribute Name: prefix-list-name

Attribute Type: string

Netconf edit-config payload

<prefix-list-type>ipv6</prefix-list-type>

<prefix-list-type>ipv6</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix>

</prefixes>

Command Syntax

ipv6 prefix-list WORD

Configure description

Up to 80 characters describing this prefix-list

Attribute Name: description

Attribute Type: string

Attribute Range: 1-80

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

</prefix>

</prefixes>

Command Syntax

description LINE

Configure prefix addr

Either IP address mask and length of the prefix list mask or Take all packets of any length. This parameter is the same as using 0.0.0.0/0 le 32 for A.B.C.D/M.

Attribute Name: prefix-addr

Attribute Type: union

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

</config>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) any

Configure sequence id

Either IP address mask and length of the prefix list mask or Take all packets of any length. This parameter is the same as using 0.0.0.0/0 le 32 for A.B.C.D/M.

Attribute Name: prefix-addr

Attribute Type: enum (any)

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

</config>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit)

Configure maximum prefix length match

Maximum prefix length match

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</config>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) ge <0-32> le <0-32>

Configure minimum prefix length match

Minimum prefix length match

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</config>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) le <0-32> ge <0-32>

Configure action

Minimum prefix length match

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

</config>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) ge <0-32>

Configure entry maximum-prefix-length-match

Maximum prefix length match

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

</config>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) le <0-32>

Configure exact prefix length match

Exact prefix length match

Attribute Name: exact-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv4>

<entry>

<prefix-addr>any</prefix-addr>

<prefix-addr>any</prefix-addr>

</config>

<exact-prefix-length-match>0</exact-prefix-length-match>

</entry>

</ipv4>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) eq <0-32>

Configure ipv6 prefix addr

Either IPv6 address mask and length of the prefix list mask or This is the same as specifying ::/0 for X:X::X:X/M

This command is supported when following feature are enabled ipv6 feature

Attribute Name: ipv6-prefix-addr

Attribute Type: union

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

</config>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) any

Configure ipv6 ipv6-prefix-addr

Either IPv6 address mask and length of the prefix list mask or This is the same as specifying ::/0 for X:X::X:X/M

This command is supported when following feature are enabled ipv6 feature

Attribute Name: ipv6-prefix-addr

Attribute Type: union

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

</config>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) X:X::X:X/M

Configure entry maximum-prefix-length-match

Maximum prefix length match

This command is supported when following feature are enabled ipv6 feature

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<entry>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</config>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) ge <0-128> le <0-128>

Configure entry minimum-prefix-length-match

Minimum prefix length match

This command is supported when following feature are enabled ipv6 feature

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<entry>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</config>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) le <0-128> ge <0-128>

Configure entry minimum-prefix-length-match

Minimum prefix length match

This command is supported when following feature are enabled ipv6 feature

Attribute Name: minimum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<entry>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

</config>

<minimum-prefix-length-match>0</minimum-prefix-length-match>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) ge <0-128>

Configure entry maximum-prefix-length-match

Maximum prefix length match

This command is supported when following feature are enabled ipv6 feature

Attribute Name: maximum-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<entry>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

</config>

<maximum-prefix-length-match>0</maximum-prefix-length-match>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) le <0-128>

Configure entry exact-prefix-length-match

Exact prefix length match

This command is supported when following feature are enabled ipv6 feature

Attribute Name: exact-prefix-length-match

Attribute Type: uint8

Attribute Range: 0-128

Netconf edit-config payload

<prefix-list-type>ip</prefix-list-type>

<prefix-list-type>ip</prefix-list-type>

<prefix-list-name>WORD</prefix-list-name>

</config>

<prefix-list-name>WORD</prefix-list-name>

<prefix-entries>

<prefix-entry>

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

</config>

<ipv6>

<entry>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

<ipv6-prefix-addr>any</ipv6-prefix-addr>

</config>

<exact-prefix-length-match>0</exact-prefix-length-match>

</entry>

</ipv6>

</prefix-entry>

</prefix-entries>

</prefix>

</prefixes>

Command Syntax

(seq <1-4294967295>|) (deny|permit) eq <0-128>

Configure disable ipv4 sequence display

Use this attribute to configure prefix list sequence number.Include and exclude sequence numbers in nonvolatile generation (NVGEN).

Attribute Name: disable-ipv4-sequence-display

Attribute Type: empty

Netconf edit-config payload

</disable-ipv4-sequence-display>

</config>

</global>

</prefixes>

Command Syntax

no ip prefix-list sequence-number

Configure disable ipv6 sequence display

Use this attribute to configure prefix list sequence number.Include and exclude sequence numbers in nonvolatile generation (NVGEN).

Attribute Name: disable-ipv6-sequence-display

Attribute Type: empty

Netconf edit-config payload

</disable-ipv6-sequence-display>

</config>

</global>

</prefixes>

Command Syntax

no ipv6 prefix-list sequence-number

clear ip prefix-list

Netconf RPC payload

<clear-prefix-list-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-list"/>

Command Syntax

clear ip prefix-list

clear ipv6 prefix-list

Netconf RPC payload

<clear-prefix-list-ipv6-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-list"/>

Command Syntax

clear ipv6 prefix-list

clear ip prefix-list WORD (A.B.C.D/M|)

Attribute Name: prefix-list-name

Attribute Type: string

Attribute Name: prefix

Attribute Type: string

Netconf RPC payload

<clear-ipv4-prefix-list xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-list">

<prefix-list-name>WORD</prefix-list-name>

</clear-ipv4-prefix-list>

Command Syntax

clear ip prefix-list WORD (A.B.C.D/M|)

clear ipv6 prefix-list WORD (X:X::X:X/M|)

Attribute Name: prefix-list-name

Attribute Type: string

Attribute Name: prefix

Attribute Type: string

Netconf RPC payload

<clear-ipv6-prefix-list xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-list">

<prefix-list-name>WORD</prefix-list-name>

</clear-ipv6-prefix-list>

Command Syntax

clear ipv6 prefix-list WORD (X:X::X:X/M|)

IPI-PREFIX-GROUP

Configure name

Use this attribute to set the prefix-group name.

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

</prefix-group>

</prefix-groups>

Command Syntax

ip prefix-group WORD

Configure type

Use this attribute to set the prefix-group name.

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

</prefix-group>

</prefix-groups>

Command Syntax

ipv6 prefix-group WORD

Configure description

Use this attribute to set a description to the prefix-group.

Attribute Name: description

Attribute Type: string

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

</prefix-group>

</prefix-groups>

Command Syntax

description LINE

Configure ipv4 entry

Use this attribute to set the IPv4 prefix value.

Attribute Name: ipv4-entry

Attribute Type: string

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

<ipv4-entries>

<ipv4-entry>A.B.C.D/M</ipv4-entry>

</config>

</ipv4-entries>

</prefix-group>

</prefix-groups>

Command Syntax

A.B.C.D/M

Configure ipv4 match xpath entry

Use this attribute to dynamically set an IPv4 prefix value using XPath

Attribute Name: ipv4-match-xpath-entry

Attribute Type: string

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

<ipv4-entries>

<ipv4-match-xpath-entry>WORD</ipv4-match-xpath-entry>

</config>

</ipv4-entries>

</prefix-group>

</prefix-groups>

Command Syntax

match-xpath WORD

Configure ipv6 entry

Use this attribute to set the IPv6 prefix value.

This command is supported when following feature are enabled IPv6 feature

Attribute Name: ipv6-entry

Attribute Type: string

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

<ipv6-entries>

<ipv6-entry>X:X::X:X/M</ipv6-entry>

</config>

</ipv6-entries>

</prefix-group>

</prefix-groups>

Command Syntax

X:X::X:X/M

Configure ipv6 match xpath entry

Use this attribute to dynamically set an IPv6 prefix value using XPath

This command is supported when following feature are enabled IPv6 feature

Attribute Name: ipv6-match-xpath-entry

Attribute Type: string

Netconf edit-config payload

<prefix-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-prefix-group">

<prefix-group>

</config>

<ipv6-entries>

<ipv6-match-xpath-entry>WORD</ipv6-match-xpath-entry>

</config>

</ipv6-entries>

</prefix-group>

</prefix-groups>

Command Syntax

match-xpath WORD

IPI-ISIS

Configure vrf name

VRF Name to associate with this instance

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<vrf-name>WORD</vrf-name>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

router isis WORD WORD

Configure instance

Use this attribute to initiate an ISIS routing instance.Configure at least one NET to start routing.

Attribute Name: instance

Attribute Type: string

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

<vrf-name>WORD</vrf-name>

</config>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

router isis WORD

Configure disable gr capability

Use this attribute to enable the GR

Attribute Name: disable-gr-capability

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</disable-gr-capability>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no capability restart graceful

Configure isis-instance disable-gr-capability

Use this attribute to enable the GR

Attribute Name: disable-gr-capability

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</disable-gr-capability>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no capability restart

Configure disable adjacency check

Use this attribute to configure the policy of adjacency based on the protocol related TLVs in the ISIS Hello packet. ISIS checks adjacency with protocol related TLVs including Protocols Supported TLV or IP Interface Address TLV by default. The command with no parameter disables this check.

Attribute Name: disable-adjacency-check

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</disable-adjacency-check>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no adjacency-check

Configure disable asla usage flex algo

Use this attribute to configure the policy of ASLA Link attributes usage in ASLA Sub-TLV (RFC-8919) for Flexible Algorithm. ISIS uses ASLA Link attributes by default, i.e. does not use legacy link attributes. The command with no keyword disables Flex-Algo ASLA usage, i.e. enables advertisement of legacy bit in ASLA. Command without no keyword enables ASLA Flex-Algo advertisement, i.e. disables legacy bit in ASLA sub-tlv.

Attribute Name: disable-asla-usage-flex-algo

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</disable-asla-usage-flex-algo>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no asla flex-algo advertise

Configure enable asla strict flex algo

Use this attribute to configure the policy of strict ASLA Link attributes usage for Flexible Algorithm path calculations. ISIS uses ASLA Link attributes by default, may also use legacy TE Link attributes. The command with no keyword disables this usage.

Attribute Name: enable-asla-strict-flex-algo

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-asla-strict-flex-algo>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

asla flex-algo strict

Configure enable asla usage all apps

Use this attribute to configure the policy of ASLA Link attributes usage for all applications for path calculations. ISIS does not use ASLA Link attributes for all applications by default. The command with no keyword disables this usage.

Attribute Name: enable-asla-usage-all-apps

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-asla-usage-all-apps>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

asla all-apps advertise

Configure enable flex algo routing

Use this attribute to enable/disable routing of Flexible Algorithm in LSP TX/RX and CSPF path calculations

Attribute Name: enable-flex-algo-routing

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-routing>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo routing

Configure enable flex algo readvertise

Use this attribute to enable/disable readvertisement of Flexible Algorithm (FAD) from ISIS Level-2 to Level-1 routing area

Attribute Name: enable-flex-algo-readvertise

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-readvertise>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo readvertise

Configure disable flex algo cspf

Use this attribute to enable/disable CPSF constrained routing of Flexible Algorithm in SPF path calculations

Attribute Name: disable-flex-algo-cspf

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</disable-flex-algo-cspf>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no capability flex-algo cspf

Configure enable flex algo adjacency sid

Use this attribute to enable/disable Flexible Algorithm specific Adjacency-SID support

Attribute Name: enable-flex-algo-adjacency-sid

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-adjacency-sid>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo adjacency-sid

Configure enable flex algo strict adjacency sid

Use this attribute to enable/disable Flexible Algorithm specific strict Adjacency-SID support

Attribute Name: enable-flex-algo-strict-adjacency-sid

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-strict-adjacency-sid>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo strict adjacency-sid

Configure enable flex algo backup adjacency sid

Use this attribute to enable/disable Flexible Algorithm specific backup Adjacency-SID support

Attribute Name: enable-flex-algo-backup-adjacency-sid

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-backup-adjacency-sid>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo backup adjacency-sid

Configure enable flex algo qos policy

Use this attribute to enable/disable Flexible Algorithm specific QoS policy support

Attribute Name: enable-flex-algo-qos-policy

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-qos-policy>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo qos-policy

Configure enable flex algo bgp ls

Use this attribute to enable/disable advertisement of Flexible Algorithm TLV(s)/Sub-TLV(s) in BGP Link-state packets

Attribute Name: enable-flex-algo-bgp-ls

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-flex-algo-bgp-ls>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

capability flex-algo bgp-ls

Configure authentication send only

Use this attribute to set the send-only option at the instance level.Use this command before configuring the authentication mode and authentication key-chain, so that the implementation of authentication goes smoothly. That is, the routers will have more time for the keys to be configured on each router if authentication is inserted only on the packets being sent, not checked on packets being received. After all routers that must communicate are configured with this command, enable the authentication mode and key chain on each router.

Attribute Name: authentication-send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<authentication-send-only>3</authentication-send-only>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

authentication send-only level-1

Configure isis-instance authentication-send-only

Attribute Name: authentication-send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<authentication-send-only>3</authentication-send-only>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

authentication send-only level-2

Configure distance

Use this attribute to set the administrative distance for all IPv4 routes.

Attribute Name: distance

Attribute Type: uint8

Default Value: 115

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

distance <1-255>

Configure dynamic host name

Use this attribute to configure the hostname to be advertised for an ISIS instance using the dynamic hostname exchange mechanism (RFC 2763) and system-ID-to-hostname translation.This command configures a hostname to be used for the Dynamic Hostname Exchange Mechanism and System-ID tohostname translation. Use the routing area tag as the hostname, not the router.s global hostname

Attribute Name: dynamic-host-name

Attribute Type: enum (dynamic-hostname|area-tag)

Default Value: dynamic-hostname

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<dynamic-host-name>dynamic-hostname</dynamic-host-name>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

dynamic-hostname (area-tag|)

Configure ignore lsp errors

Use this attribute to ignore LSPs with checksum errors. By default, ISIS validates checksum for LSP whenever it receives LSPs and if the checksum has an error, the LSP will be dropped. Configuring this command to ignore the LSP checksum error and treat it as if checksum is passed.

Attribute Name: ignore-lsp-errors

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</ignore-lsp-errors>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

ignore-lsp-errors

Configure lfa hold timer

LFA terminate-hold-on interval

Attribute Name: lfa-hold-timer

Attribute Type: int32

Default Value: 1000

Attribute Range: 100-100000

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<lfa-hold-timer>100</lfa-hold-timer>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

fast-reroute terminate-hold-on interval <100-100000>

Configure level capability

Use this attribute to set the IS to the specified level of routing.Changing is-type brings down, then brings up a particular level of routing. There is a limitation: Only one ISIS instance can run Level-2 routing (either Level-2 only IS, or Level-1-2 IS)

Attribute Name: level-capability

Attribute Type: enum (level-1|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-capability>level-1-2</level-capability>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

is-type (level-1|level-2-only|level-1-2)

Configure isis-instance authentication-send-only

Attribute Name: authentication-send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<authentication-send-only>level-1-2</authentication-send-only>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

authentication send-only (level-1-only|level-2-only|level-1-2|)

Configure incremental spf levels

Use this attribute to enable incremental SPF for a routing process

Attribute Name: incremental-spf-levels

Attribute Type: enum (level-1|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<incremental-spf-levels>level-1-2</incremental-spf-levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

ispf (level-1|level-2-only|level-1-2|)

Configure priority tag

Use this attribute to set a high priority tag value

Attribute Name: priority-tag

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<priority-tag>1</priority-tag>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

ip route high-priority tag <1-4294967295>

Configure enable bfd all interfaces

Use this attribute to enable the Bidirectional Forwarding Detection (BFD) feature on the interfaces enabled with this ISIS instance. This command sets BFD fall-over check for all the neighbors under specified process.

Attribute Name: enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

</enable-bfd-all-interfaces>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

bfd all-interfaces

Configure maximum area addresses

Use this attribute to set the maximum number of ISIS areas that can be configured on this router with the net command. By default, ISIS permits a maximum of three areas that can be defined on a router.

Attribute Name: maximum-area-addresses

Attribute Type: uint8

Default Value: 3

Attribute Range: 3-254

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<maximum-area-addresses>3</maximum-area-addresses>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

max-area-address <3-254>

Configure context name

Use this attribute to set the SNMP context name for ISIS instance.

Attribute Name: context-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<context-name>WORD</context-name>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

snmp context-name WORD

Configure area password

Use this attribute to set the authentication password for the Level-1 area and to set authentication on Level-1 SNP PDUs. This command enables authentication when receiving and sending LSP and SNP PDU in Level-1 areas. Area password must be the same for all the ISIS routers in the same area

Attribute Name: area-password

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<area-authentication>

<area-password>WORD</area-password>

</config>

</area-authentication>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

area-password WORD

Configure sequence number packet

Attribute Name: sequence-number-packet

Attribute Type: enum (send-only|validate)

Attribute Name: area-password

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<area-authentication>

<area-password>WORD</area-password>

<sequence-number-packet>send-only</sequence-number-packet>

</config>

</area-authentication>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

area-password WORD authenticate snp (send-only|validate)

Configure net

Use this attribute to add a Network Entity Title (NET) for the instance.On a router running ISIS, a NET can be 8 to 20 bytes in length. The last byte is always the n-selector, and must be zero. The n-selector indicates no transport entity, and means that the packet is for the routing software of the system. The six bytes directly preceding the n-selector are the system ID. The system ID length is a fixed size and cannot be changed. The system ID must be unique throughout each area (Level 1) and throughout the backbone (Level 2). The bytes preceding the system ID are the area ID, which can be from 1 - 13 bytes in length. By default, a maximum of three NETs per router are allowed with a different area ID but the system ID should be the same for all NETs. You can increase the number of area IDs per system ID with the max-area-address command.

Attribute Name: net

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<network-entity-title>

</config>

</network-entity-title>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

net NET

Configure domain password

Use this attribute to set the authentication password for the Level-2 domain, and optionally, the authentication password on Level-2 SNP PDUs.Configuring this command to enable authentication when receiving and sending LSP and SNP PDU in Level-2 domain. Domain password must be the same in Level-2 domain.

Attribute Name: domain-password

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<domain-authentication>

<domain-password>WORD</domain-password>

</config>

</domain-authentication>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

domain password WORD

Configure domain snp

Attribute Name: domain-snp

Attribute Type: enum (send-only|validate)

Attribute Name: domain-password

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<domain-authentication>

<domain-password>WORD</domain-password>

<domain-snp>send-only</domain-snp>

</config>

</domain-authentication>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

domain password WORD authenticate snp (send-only|validate)

Configure style

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-style (narrow) level-1-2

Configure level number

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-style (wide) level-1-2

Configure metric style

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-style (transition) level-1-2

Configure metric style

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-style (narrow transition) level-1-2

Configure metric style

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-style (wide transition) level-1-2

Configure metric level-number

Use this attribute to configure the ISIS metric style

This command is supported when following feature are enabled wide metric feature

Attribute Name: level-number

Attribute Type: enum (level-1|level-2|level-1-2)

Attribute Name: style

Attribute Type: enum (narrow|wide|transition|narrow transition|wide transition)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level-number>level-1-2</level-number>

</config>

</metric>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

Configure lsp refresh interval

Use this attribute to set the LSP refresh interval.IP Infusion Inc. recommends making the lsp-refresh-interval smaller than max-lsp-lifetime value.

Attribute Name: lsp-refresh-interval

Attribute Type: uint16

Default Value: 900

Attribute Range: 1-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<lsp-refresh-interval>1</lsp-refresh-interval>

</config>

</timers>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

lsp-refresh-interval <1-65535>

Configure lsp lifetime interval

Use this attribute to set the maximum LSP lifetime. You must set max-lsp-lifetime greater than lsp-refreshinterval.

Attribute Name: lsp-lifetime-interval

Attribute Type: uint16

Default Value: 1200

Attribute Range: 350-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<lsp-lifetime-interval>350</lsp-lifetime-interval>

</config>

</timers>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

max-lsp-lifetime <350-65535>

Configure enable

Use this attribute to redistribute reachability information from one level to the other level. If an distribute-list name is given with this command for an access list that does not exist, the routes are still redistributed.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<level-1-into-2-redistributes>

<redistribute-level-1-into-2>

</enable>

</enable>

</config>

</redistribute-level-1-into-2>

</level-1-into-2-redistributes>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-1 into level-2

Configure level 1 acl

Attribute Name: level-1-acl

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<level-1-into-2-redistributes>

<redistribute-level-1-into-2>

</enable>

</enable>

</config>

<level-1-acl>WORD</level-1-acl>

</redistribute-level-1-into-2>

</level-1-into-2-redistributes>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-1 into level-2 distribute-list WORD

Configure level-2-into-1-redistributes enable

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<level-2-into-1-redistributes>

<redistribute-level-2-into-1>

</enable>

</enable>

</config>

</redistribute-level-2-into-1>

</level-2-into-1-redistributes>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-2 into level-1

Configure level 2 acl

Attribute Name: level-2-acl

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<level-2-into-1-redistributes>

<redistribute-level-2-into-1>

</enable>

</enable>

</config>

<level-2-acl>WORD</level-2-acl>

</redistribute-level-2-into-1>

</level-2-into-1-redistributes>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-2 into level-1 distribute-list WORD

Configure originate

Use this attribute to set originate reachability information to Default destination into LSP.There is no default information in Level-2 domain by default, while Level-1 router calculates default to L1L2 route during SPF calculation. This command enables to originate default route into Level-2 domain.

Attribute Name: originate

Attribute Type: enum (originate|originate level-1|originate always)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<default-route-informations>

<default-route-information>

<originate>originate</originate>

<originate>originate</originate>

</config>

</default-route-information>

</default-route-informations>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

default-information (originate|originate level-1|originate always)

Configure route map name

Route-map Name

Attribute Name: route-map-name

Attribute Type: string

Default Value: ""

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<default-route-informations>

<default-route-information>

<originate>originate</originate>

<originate>originate</originate>

</config>

<route-map-name>WORD</route-map-name>

</default-route-information>

</default-route-informations>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

default-information (originate|originate level-1|originate always) route-map WORD

Configure afi name

Use this attribute to configure IPv6 routing specific configuration

Attribute Name: afi-name

Attribute Type: enum (ipv6)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<afi-name>1</afi-name>

</config>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

address-family ipv6

Configure address-family-ipv6 afi-name

Use this attribute to configure IPv6 routing specific configuration

Attribute Name: afi-name

Attribute Type: enum (ipv6)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<afi-name>1</afi-name>

</config>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

address-family ipv6 unicast

Configure address-family-ipv6 disable-adjacency-check

Attribute Name: disable-adjacency-check

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

</disable-adjacency-check>

</config>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no adjacency-check

Configure administrative distance

Use this attribute to set the administrative distance for all IPv6 routes

Attribute Name: administrative-distance

Attribute Type: uint32

Default Value: 115

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<administrative-distance>1</administrative-distance>

</config>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

distance <1-255>

Configure ipv6 metric value

Use this attributes to redistribute routes from another protocol into the ISIS routing table. With metric, metric-type, level and route-map options.

Attribute Name: ipv6-metric-value

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-16777215

Attribute Name: ipv6-metric-type

Attribute Type: enum (internal|external)

Default Value: internal

Attribute Name: ipv6-level

Attribute Type: enum (level-1|level-2|level-1-2)

Default Value: level-2

Attribute Name: ipv6-route-map

Attribute Type: string

Default Value: ""

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<ipv6-protocol-type>connected</ipv6-protocol-type>

<ipv6-protocol-type>connected</ipv6-protocol-type>

<ipv6-metric-type>internal</ipv6-metric-type>

<ipv6-level>level-2</ipv6-level>

<ipv6-route-map>WORD</ipv6-route-map>

</config>

<ipv6-metric-value>0</ipv6-metric-value>

</redistribute>

</redistributions>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute (connected|static|rip|ospf|bgp) ({ metric-type (internal|external)| level-1|level-2|level-1-2| route-map WORD| metric <0-16777215> }|)

Configure prefix

Use this attribute to configure the summary prefix to summarize IPv6 reachability information.

Attribute Name: prefix

Attribute Type: string

Attribute Name: level

Attribute Type: enum (level-1|level-2|level-1-2)

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 1-63

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<summary-prefixes>

<summary-prefix>

<level>level-1</level>

</config>

</summary-prefix>

</summary-prefixes>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

summary-prefix X:X::X:X/M (level-1|level-2|level-1-2) (metric <1-63>|)

Configure level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-1)

Configure multi-topologies level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-2)

Configure multi-topologies level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-1-2)

Configure multi-topologies level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-1 transition)

Configure multi-topologies level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-1-2 transition)

Configure multi-topologies level

Use this attribute to configure the ISIS Multi-topology

This command is supported when following feature are enabled multi-topology feature

Attribute Name: level

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv6>

<multi-topologies>

<multi-topology>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</multi-topology>

</multi-topologies>

</address-family-ipv6>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

multi-topology (level-2 transition)

Configure system id

System ID

Attribute Name: system-id

Attribute Type: string

Attribute Name: value

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<system-id>WORD</system-id>

<system-id>System-ID</system-id>

</config>

</distance>

</distances>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

distance <1-255> System-ID

Configure access list name

Use this attribute to set the administrative distance for specific IPv4 routes.

Attribute Name: access-list-name

Attribute Type: string

Default Value: ""

Attribute Name: value

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<system-id>WORD</system-id>

<system-id>System-ID</system-id>

</config>

<access-list-name>WORD</access-list-name>

</distance>

</distances>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

distance <1-255> System-ID (WORD|)

Configure set bit on boot

Overload interval after reboot

Attribute Name: set-bit-on-boot

Attribute Type: union

Attribute Name: enabled

Attribute Type: empty

Attribute Name: suppress-type

Attribute Type: enum (default|external|interlevel|external interlevel)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<lsp-over-load>

</enabled>

<suppress-type>default</suppress-type>

<set-bit-on-boot>default</set-bit-on-boot>

</config>

</lsp-over-load>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

set-overload-bit { suppress (external|interlevel|external interlevel)| on-startup (wait-for-bgp|<5-86400>) }

Configure enabled

Use this attribute to set the overload-bit in self-LSPs. If the overload-bit is set in LSPs, the router is not used as a transit router during SPF calculation. This configuration causes a router to update its own LSP with the overload bit set and causes the other routers not to use this router as a transit or forwarding router. The router continues to receive LSPs when the overload bit is set. If the on-startup option is specified, the router sets the overload bit only at startup, then clears the bit after the specified interval has elapsed. If the on-startup option is specified using the wait-for-bgp option, the overload bit is setup at startup, then the bit is cleared after the BGP router signals it has finished converging or if the router does not signal it has finished converging in 10 minutes. If there is no BGP process running, the overload bit clears immediately.

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<lsp-over-load>

</enabled>

</config>

</lsp-over-load>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

set-overload-bit

Configure level-1-into-2-redistributes enable

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<level-1-into-2-redistributes>

<redistribute-level-1-into-2>

</enable>

</enable>

</config>

</redistribute-level-1-into-2>

</level-1-into-2-redistributes>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-1 into level-2

Configure redistribute-level-1-into-2 level-1-acl

Attribute Name: level-1-acl

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<level-1-into-2-redistributes>

<redistribute-level-1-into-2>

</enable>

</enable>

</config>

<level-1-acl>WORD</level-1-acl>

</redistribute-level-1-into-2>

</level-1-into-2-redistributes>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-1 into level-2 distribute-list WORD

Configure level-2-into-1-redistributes enable

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<level-2-into-1-redistributes>

<redistribute-level-2-into-1>

</enable>

</enable>

</config>

</redistribute-level-2-into-1>

</level-2-into-1-redistributes>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-2 into level-1

Configure redistribute-level-2-into-1 level-2-acl

Attribute Name: level-2-acl

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<level-2-into-1-redistributes>

<redistribute-level-2-into-1>

</enable>

</enable>

</config>

<level-2-acl>WORD</level-2-acl>

</redistribute-level-2-into-1>

</level-2-into-1-redistributes>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis level-2 into level-1 distribute-list WORD

Configure default-route-informations originate

Use this attribute to originate reachability information to Default destination into LSP.There is no default information in Level-2 domain by default, while Level-1 router calculates default to L1L2 route during SPF calculation. This command enables to originate default route into Level-2 domain.

Attribute Name: originate

Attribute Type: enum (originate|originate level-1|originate always)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<default-route-informations>

<default-route-information>

<originate>originate</originate>

<originate>originate</originate>

</config>

</default-route-information>

</default-route-informations>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

default-information (originate|originate level-1|originate always)

Configure default-route-information route-map-name

Route Map Name Attribute

Attribute Name: route-map-name

Attribute Type: string

Default Value: ""

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<default-route-informations>

<default-route-information>

<originate>originate</originate>

<originate>originate</originate>

</config>

<route-map-name>WORD</route-map-name>

</default-route-information>

</default-route-informations>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

default-information (originate|originate level-1|originate always) route-map WORD

Configure metric value

IS-IS metric

Attribute Name: metric-value

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-16777215

Attribute Name: metric-type

Attribute Type: enum (internal|external)

Default Value: internal

Attribute Name: route-map

Attribute Type: string

Default Value: ""

Attribute Name: level

Attribute Type: enum (level-1|level-2|level-1-2)

Default Value: level-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<protocol-type>connected</protocol-type>

<protocol-type>connected</protocol-type>

<metric-type>internal</metric-type>

<route-map>WORD</route-map>

<level>level-2</level>

</config>

<metric-value>0</metric-value>

</redistribute>

</redistributions>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute (connected|static|rip|ospf|bgp) ({ metric-type (internal|external)| route-map WORD| level-1|level-2|level-1-2| metric <0-16777215> }|)

Configure metric

Use this attribute to Summary Address to summarize IPv4 reachability information.

Attribute Name: prefix

Attribute Type: string

Attribute Name: level

Attribute Type: enum (level-1|level-2|level-1-2)

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 1-63

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<summary-addresses>

<summary-address>

<level>level-1</level>

</config>

</summary-address>

</summary-addresses>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

summary-address A.B.C.D/M (level-1|level-2|level-1-2) (metric <1-63>|)

Configure id

Instance ID

Attribute Name: id

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<redistribute-isis-instances>

<redistribute-isis-instance>

</config>

</redistribute-isis-instance>

</redistribute-isis-instances>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis WORD

Configure metric type

IS-IS metric

Attribute Name: metric-value

Attribute Type: uint32

Default Value: 0

Attribute Range: 0-16777215

Attribute Name: metric-type

Attribute Type: enum (internal|external)

Default Value: internal

Attribute Name: route-map

Attribute Type: string

Default Value: ""

Attribute Name: level

Attribute Type: enum (level-1|level-2|level-1-2)

Default Value: level-2

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<address-family-ipv4>

<redistribute-isis-instances>

<redistribute-isis-instance>

<metric-type>internal</metric-type>

<route-map>WORD</route-map>

<level>level-2</level>

</config>

<metric-value>0</metric-value>

</redistribute-isis-instance>

</redistribute-isis-instances>

</address-family-ipv4>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

redistribute isis WORD { metric-type (internal|external)| route-map WORD| level-1|level-2|level-1-2| metric <0-16777215> }

Configure passive interface all

Use this attribute to set all interfaces as passive.

Attribute Name: passive-interface-all

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<passive-interfaces>

</passive-interface-all>

</config>

</passive-interfaces>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

passive-interface

Configure name

Use this attribute to set interface as passive.

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<passive-interfaces>

<passive-interface>

<name>IFNAME</name>

</config>

</passive-interface>

</passive-interfaces>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

passive-interface IFNAME

Configure disable-passive-interfaces name

Use this attribute to set interface as passive.

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<passive-interfaces>

<disable-passive-interfaces>

<disable-passive-interface>

<name>IFNAME</name>

</config>

</disable-passive-interface>

</disable-passive-interfaces>

</passive-interfaces>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

passive-interface IFNAME disable

Configure hold timer

Time that a router waits to acquire a set of LSPs to process together

Attribute Name: hold-timer

Attribute Type: uint8

Attribute Range: 1-60

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<microloop-avoidances>

<microloop-avoidance>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

<hold-timer>1</hold-timer>

</microloop-avoidance>

</microloop-avoidances>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

microloop-avoidance hold-timer <1-60> (level-1|level-2)

Configure max fib

Maximum time required to update a FIB irrespective of the change

Attribute Name: max-fib

Attribute Type: uint8

Attribute Range: 1-60

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<microloop-avoidances>

<microloop-avoidance>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

<max-fib>1</max-fib>

</microloop-avoidance>

</microloop-avoidances>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

microloop-avoidance max-fib <1-60> (level-1|level-2)

Configure level type

Microloop avoidance

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<microloop-avoidances>

<microloop-avoidance>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

</enable>

</microloop-avoidance>

</microloop-avoidances>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

microloop-avoidance (level-1|level-2)

Configure algo number

Use this attribute to configure Flexible Algorithm specific configuration

Attribute Name: algo-number

Attribute Type: uint8

Attribute Range: 128-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

flex-algo <128-255>

Configure disable advertise definition

Use this attribute to unconfigure the ISIS Flexible Algorithm Advertisement

Attribute Name: disable-advertise-definition

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</disable-advertise-definition>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no advertise

Configure disable participate

Use this attribute to unconfigure the ISIS Flexible Algorithm Participation

Attribute Name: disable-participate

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</disable-participate>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

no participate

Configure flexalgo metric-type

ISIS Flexible Algorithm metric type

Attribute Name: metric-type

Attribute Type: enum (igp-metric|link-delay|te-metric)

Default Value: igp-metric

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<metric-type>igp-metric</metric-type>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

metric-type (igp-metric|link-delay|te-metric)

Configure calculation type

ISIS Flexible Algorithm calculation type

Attribute Name: calculation-type

Attribute Type: enum (spf)

Default Value: spf

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<calculation-type>spf</calculation-type>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

calculation-type (spf)

Configure priority

Flexible Algorithm priority Value

Attribute Name: priority

Attribute Type: uint8

Default Value: 5

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

priority <1-255>

Configure exclude minimum bandwidth

Minimum bandwidth value constraint for flexible algorithm. The bandwidth input ranges are 1 to 999 Kbps, 1 to 999 Mbps and 1 to 100 Gbps.

Attribute Name: exclude-minimum-bandwidth

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<exclude-minimum-bandwidth>BANDWIDTH</exclude-minimum-bandwidth>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

exclude-minimum-bandwidth BANDWIDTH

Configure exclude maximum delay

Use this attribute to specify maximum link delay value constraint for flexible algorithm

Attribute Name: exclude-maximum-delay

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<exclude-maximum-delay>1</exclude-maximum-delay>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

exclude-maximum-delay <1-16777215>

Configure enable intf group mode bw calc

Enable interface group mode total bandwidth calculation for ISIS Flexible algorithm

Attribute Name: enable-intf-group-mode-bw-calc

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</enable-intf-group-mode-bw-calc>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

intf-group-mode bandwidth

Configure reference bandwidth

Reference bandwidth value constraint for flexible algorithm SPF’s automatic metric calculation. The bandwidth input ranges are 1 to 999 Kbps, 1 to 999 Mbps and 1 to 100 Gbps.

Attribute Name: reference-bandwidth

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<reference-bandwidth>BANDWIDTH</reference-bandwidth>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

reference-bandwidth BANDWIDTH

Configure granularity bandwidth

Granularity bandwidth value constraint for flexible algorithm SPF’s automatic metric calculation. The bandwidth input ranges are 1 to 999 Kbps, 1 to 999 Mbps and 1 to 100 Gbps.

Attribute Name: granularity-bandwidth

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<granularity-bandwidth>BANDWIDTH</granularity-bandwidth>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

granularity-bandwidth BANDWIDTH

Configure enable fast reroute

Use this attribute to configure the ISIS Flexible Algorithm fast rerouting

Attribute Name: enable-fast-reroute

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</enable-fast-reroute>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

fast-reroute

Configure enable remote lfa

Use this attribute to configure the ISIS Flexible Algorithm Remote-LFA

Attribute Name: enable-remote-lfa

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</enable-remote-lfa>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

remote-lfa

Configure enable ti lfa

Use this attribute to configure the ISIS Flexible Algorithm TI-LFA

Attribute Name: enable-ti-lfa

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</enable-ti-lfa>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

ti-lfa

Configure enable prefix metric flag

Use this attribute to configure the ISIS Flexible Algorithm prefix-metric flag sub-TLV advertisement

Attribute Name: enable-prefix-metric-flag

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

</enable-prefix-metric-flag>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

prefix-metric-flag

Configure fapm metric

Distance Value

Attribute Name: fapm-metric

Attribute Type: uint8

Default Value: 24

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<fapm-metric>1</fapm-metric>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

fapm-metric <1-255>

Configure maximum ecmp paths

Distance Value

Attribute Name: maximum-ecmp-paths

Attribute Type: uint8

Default Value: 8

Attribute Range: 8-64

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<maximum-ecmp-paths>8</maximum-ecmp-paths>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

maximum-ecmp-paths <8-64>

Configure affinity eag exclude any

Flexible Algoithm Exclude Any Affinity-EAG Name

Attribute Name: affinity-eag-exclude-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-exclude-any>WORD</affinity-eag-exclude-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-exclude-any WORD

Configure affinity eag include any

Flexible Algoithm Include Any Affinity-EAG Name

Attribute Name: affinity-eag-include-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-include-any>WORD</affinity-eag-include-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-include-any WORD

Configure affinity eag include all

Flexible Algoithm Include All Affinity-EAG Name

Attribute Name: affinity-eag-include-all

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-include-all>WORD</affinity-eag-include-all>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-include-all WORD

Configure affinity eag reverse exclude any

Flexible Algoithm reverse Exclude Any Affinity-EAG Name

Attribute Name: affinity-eag-reverse-exclude-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-reverse-exclude-any>WORD</affinity-eag-reverse-exclude-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-reverse-exclude-any WORD

Configure affinity eag reverse include any

Flexible Algoithm reverse Include Any Affinity-EAG Name

Attribute Name: affinity-eag-reverse-include-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-reverse-include-any>WORD</affinity-eag-reverse-include-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-reverse-include-any WORD

Configure affinity eag reverse include all

Flexible Algoithm reverse Include All Affinity-EAG Name

Attribute Name: affinity-eag-reverse-include-all

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-eag-reverse-include-all>WORD</affinity-eag-reverse-include-all>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-eag-reverse-include-all WORD

Configure affinity ag exclude any

Flexible Algoithm Exclude Any Affinity-AG Name

Attribute Name: affinity-ag-exclude-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-exclude-any>WORD</affinity-ag-exclude-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-exclude-any WORD

Configure affinity ag include any

Flexible Algoithm Include Any Affinity-AG Name

Attribute Name: affinity-ag-include-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-include-any>WORD</affinity-ag-include-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-include-any WORD

Configure affinity ag include all

Flexible Algoithm Include All Affinity-AG Name

Attribute Name: affinity-ag-include-all

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-include-all>WORD</affinity-ag-include-all>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-include-all WORD

Configure affinity ag reverse exclude any

Flexible Algoithm reverse Exclude Any Affinity-AG Name

Attribute Name: affinity-ag-reverse-exclude-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-reverse-exclude-any>WORD</affinity-ag-reverse-exclude-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-reverse-exclude-any WORD

Configure affinity ag reverse include any

Flexible Algoithm reverse Include Any Affinity-AG Name

Attribute Name: affinity-ag-reverse-include-any

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-reverse-include-any>WORD</affinity-ag-reverse-include-any>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-reverse-include-any WORD

Configure affinity ag reverse include all

Flexible Algoithm reverse Include All Affinity-AG Name

Attribute Name: affinity-ag-reverse-include-all

Attribute Type: string

Attribute Range: 1-16

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<affinity-ag-reverse-include-all>WORD</affinity-ag-reverse-include-all>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

affinity-ag-reverse-include-all WORD

Configure bandwidth threshold

Staircase bandwidth threshold value constraint for flexible algorithm. The bandwidth input ranges are 1 to 999 Kbps, 1 to 999 Mbps and 1 to 100 Gbps.

Attribute Name: bandwidth-threshold

Attribute Type: string

Attribute Name: threshold-metric

Attribute Type: uint32

Attribute Range: 1-4261412

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<flexalgo-bandwidth-thresholds>

<flexalgo-bandwidth-threshold>

<bandwidth-threshold>BANDWIDTH</bandwidth-threshold>

<bandwidth-threshold>BANDWIDTH</bandwidth-threshold>

<threshold-metric>1</threshold-metric>

</config>

</flexalgo-bandwidth-threshold>

</flexalgo-bandwidth-thresholds>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

bandwidth-threshold BANDWIDTH threshold-metric <1-4261412>

Configure threshold metric

Link metric value for the bandwidth threshold

Attribute Name: threshold-metric

Attribute Type: uint32

Attribute Range: 1-4261412

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<flexalgo-bandwidth-thresholds>

<flexalgo-bandwidth-threshold>

<bandwidth-threshold>BANDWIDTH</bandwidth-threshold>

<bandwidth-threshold>BANDWIDTH</bandwidth-threshold>

</config>

<threshold-metric>1</threshold-metric>

</flexalgo-bandwidth-threshold>

</flexalgo-bandwidth-thresholds>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

flex-algo <128-255> bandwidth-threshold BANDWIDTH threshold-metric <1-4261412>

Configure flexalgo-microloop-avoidances level-type

IS-IS instance level,(1|2)

Attribute Name: level-type

Attribute Type: enum (level-1|level-2)

Attribute Name: enable

Attribute Type: uint8

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<flexalgo-microloop-avoidances>

<flexalgo-microloop-avoidance>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</enable>

</config>

</flexalgo-microloop-avoidance>

</flexalgo-microloop-avoidances>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

microloop-avoidance (level-1|level-2)

Configure flexalgo-microloop-avoidance enable

Microloop avoidance

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<algo-number>128</algo-number>

<algo-number>128</algo-number>

</config>

<flexalgo-microloop-avoidances>

<flexalgo-microloop-avoidance>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

</enable>

</flexalgo-microloop-avoidance>

</flexalgo-microloop-avoidances>

</flexalgo>

</flexalgos>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

microloop-avoidance flex-algo <128-255> (level-1|level-2)

Configure options

Debug Configuration Flag

Attribute Name: options

Attribute Type: bits (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Netconf edit-config payload

<debug>

</config>

</debug>

</isis>

Command Syntax

debug isis (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Configure enable hello

Use this attribute to turn on debugging for ISIS hello.

Attribute Name: enable-hello

Attribute Type: empty

Netconf edit-config payload

<debug>

</enable-hello>

</config>

</debug>

</isis>

Command Syntax

debug isis hello

clear clns is-neighbors System-ID

Attribute Name: system-id

Attribute Type: string

Netconf RPC payload

<isis-clear-is-neighbors xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<system-id>System-ID</system-id>

</isis-clear-is-neighbors>

Command Syntax

clear clns is-neighbors System-ID

clear clns neighbors

Netconf RPC payload

<isis-clear-clns-neighbors xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

clear clns neighbors

clear ip isis (WORD|) route (redistribution|all)

Attribute Name: instance

Attribute Type: string

Attribute Name: ipv4-route

Attribute Type: enum (redistribution|all)

Netconf RPC payload

<isis-clear-ip-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<ipv4-route>redistribution</ipv4-route>

</isis-clear-ip-route>

Command Syntax

clear ip isis (WORD|) route (redistribution|all)

clear ipv6 isis (WORD|) route (redistribution|all)

Attribute Name: instance

Attribute Type: string

Attribute Name: ipv6-route

Attribute Type: enum (redistribution|all)

Netconf RPC payload

<isis-clear-ipv6-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<ipv6-route>redistribution</ipv6-route>

</isis-clear-ipv6-route>

Command Syntax

clear ipv6 isis (WORD|) route (redistribution|all)

clear isis (WORD|) process

Attribute Name: instance

Attribute Type: string

Netconf RPC payload

<isis-process-clear xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

</isis-process-clear>

Command Syntax

clear isis (WORD|) process

clear isis counter

Netconf RPC payload

<isis-clear-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

clear isis counter

clear isis adjacency * (vrf VRFNAME|)

Attribute Name: adjacency-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-clear-adjacency-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<adjacency-vrf-name>VRFNAME</adjacency-vrf-name>

</isis-clear-adjacency-all>

Command Syntax

clear isis adjacency * (vrf VRFNAME|)

clear isis WORD adjacency * (vrf VRFNAME|)

Attribute Name: tag-name

Attribute Type: string

Attribute Name: adjacency-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-process-clear-adjacency-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<tag-name>WORD</tag-name>

<adjacency-vrf-name>VRFNAME</adjacency-vrf-name>

</isis-process-clear-adjacency-all>

Command Syntax

clear isis WORD adjacency * (vrf VRFNAME|)

clear isis WORD adjacency (IFNAME|) (vrf VRFNAME|)

Attribute Name: tag-name

Attribute Type: string

Attribute Name: tag-if-name

Attribute Type: string

Attribute Name: adjacency-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-process-clear-adjacency-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<tag-name>WORD</tag-name>

<tag-if-name>IFNAME</tag-if-name>

<adjacency-vrf-name>VRFNAME</adjacency-vrf-name>

</isis-process-clear-adjacency-interface>

Command Syntax

clear isis WORD adjacency (IFNAME|) (vrf VRFNAME|)

clear isis adjacency (IFNAME|) (vrf VRFNAME|)

Attribute Name: adjacency-if-name

Attribute Type: string

Attribute Name: adjacency-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-clear-adjacency-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<adjacency-if-name>IFNAME</adjacency-if-name>

<adjacency-vrf-name>VRFNAME</adjacency-vrf-name>

</isis-clear-adjacency-interface>

Command Syntax

clear isis adjacency (IFNAME|) (vrf VRFNAME|)

clear isis WORD adjacency system-id XXXX.XXXX.XXXX (vrf VRFNAME|)

Attribute Name: tag-name

Attribute Type: string

Attribute Name: tag-system-id

Attribute Type: string

Attribute Name: tag-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-process-clear-adjacency-system-id xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<tag-name>WORD</tag-name>

<tag-system-id>XXXX.XXXX.XXXX</tag-system-id>

<tag-vrf-name>VRFNAME</tag-vrf-name>

</isis-process-clear-adjacency-system-id>

Command Syntax

clear isis WORD adjacency system-id XXXX.XXXX.XXXX (vrf VRFNAME|)

clear isis adjacency system-id XXXX.XXXX.XXXX (vrf VRFNAME|)

Attribute Name: adjacency-system-id

Attribute Type: string

Attribute Name: adjacency-vrf-name

Attribute Type: string

Netconf RPC payload

<isis-clear-adjacency-system-id xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<adjacency-system-id>XXXX.XXXX.XXXX</adjacency-system-id>

<adjacency-vrf-name>VRFNAME</adjacency-vrf-name>

</isis-clear-adjacency-system-id>

Command Syntax

clear isis adjacency system-id XXXX.XXXX.XXXX (vrf VRFNAME|)

snmp restart isis

Netconf RPC payload

<isis-restart-snmp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

snmp restart isis

debug isis (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Netconf RPC payload

<isis-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<terminal-debug-options>ifsm</terminal-debug-options>

</isis-terminal-debug-on>

Command Syntax

debug isis (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

no debug isis (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

Netconf RPC payload

<isis-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<terminal-debug-options>ifsm</terminal-debug-options>

</isis-debug-off>

Command Syntax

no debug isis (ifsm|nfsm|pdu|lsp|spf|events|nsm|checksum|authentication|local-updates|protocol-errors|bfd|rib|lfa|ofib|asla|flexalgo|micro-loop-avoidance|all)

debug isis spf-trace

Netconf RPC payload

<isis-terminal-debug-spf-trace-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

debug isis spf-trace

no debug isis spf-trace

Netconf RPC payload

<isis-terminal-debug-spf-trace-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

no debug isis spf-trace

debug isis hello

Netconf RPC payload

<isis-debug-hello-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

debug isis hello

no debug isis hello

Netconf RPC payload

<isis-debug-hello-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

no debug isis hello

debug isis hello interface IFNAME

Attribute Name: interface

Attribute Type: string

Netconf RPC payload

<isis-debug-interface-hello-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<interface>IFNAME</interface>

</isis-debug-interface-hello-on>

Command Syntax

debug isis hello interface IFNAME

no debug isis hello interface IFNAME

Attribute Name: interface

Attribute Type: string

Netconf RPC payload

<isis-debug-interface-hello-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<interface>IFNAME</interface>

</isis-debug-interface-hello-off>

Command Syntax

no debug isis hello interface IFNAME

debug isis hello System-ID

Attribute Name: system-id

Attribute Type: string

Netconf RPC payload

<isis-debug-system-id-hello-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<system-id>System-ID</system-id>

</isis-debug-system-id-hello-on>

Command Syntax

debug isis hello System-ID

no debug isis hello System-ID

Attribute Name: system-id

Attribute Type: string

Netconf RPC payload

<isis-debug-system-id-hello-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<system-id>System-ID</system-id>

</isis-debug-system-id-hello-off>

Command Syntax

no debug isis hello System-ID

no debug all isis

Netconf RPC payload

<isis-all-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis"/>

Command Syntax

no debug all isis

IPI-ISIS-LSP

Configure spf max delay

Maximum delay between receiving a change to SPF calculation in milliseconds. The default value is 5000

Attribute Name: spf-max-delay

Attribute Type: uint32

Attribute Range: 0-2147483647

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<spf-levels>

<spf-level>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<spf-delays>

<spf-delay>

<spf-max-delay>0</spf-max-delay>

<spf-max-delay>0</spf-max-delay>

<spf-min-delay>0</spf-min-delay>

</config>

<spf-min-delay>0</spf-min-delay>

</spf-delay>

</spf-delays>

</spf-level>

</spf-levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

spf-interval-exp ((level-1|level-2)|) <0-2147483647> <0-2147483647>

Configure lsp max wait interval

Use this attribute to set minimum interval before regenerating the same LSP. The smaller the interval, the faster the convergence. However, this setting might cause more frequent flooding

Attribute Name: lsp-max-wait-interval

Attribute Type: uint32

Default Value: 5

Attribute Range: 1-120

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<lsp-max-wait-interval>1</lsp-max-wait-interval>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

lsp-gen-interval ((level-1|level-2)|) <1-120>

Configure lsp mtu size

Use this attribute to set minimum interval before regenerating the same LSP

Attribute Name: lsp-mtu-size

Attribute Type: uint16

Default Value: 1492

Attribute Range: 512-4352

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<lsp-mtu-size>512</lsp-mtu-size>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

lsp-mtu ((level-1|level-2)|) <512-4352>

Configure wait timer

Number of seconds to delay in waiting state before on state

Attribute Name: wait-timer

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<wait-timer>1</wait-timer>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

isis wait-timer <1-65535> level-1-2

Configure restart timer

Use this attribute to restart the ISIS timer

Attribute Name: restart-timer

Attribute Type: uint16

Attribute Range: 5-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<restart-timer>5</restart-timer>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

restart-timer <5-65535> level-1-2

Configure instance

Number of seconds to delay in waiting state before on state

Attribute Name: wait-timer

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<wait-timer>1</wait-timer>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

isis wait-timer <1-65535> (level-1|level-2|)

Configure type

Use this attribute to restart the ISIS timer

Attribute Name: restart-timer

Attribute Type: uint16

Attribute Range: 5-65535

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<restart-timer>5</restart-timer>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

restart-timer <5-65535> (level-1|level-2|)

Configure mode

Use this attribute to set the authentication mode at the instance level.

Attribute Name: mode

Attribute Type: enum (md5|text)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

</config>

</authentication>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

authentication mode (md5|text) (level-1|level-2|)

Configure key chain

Use this attribute to set the key chain to be used for authentication at the instance level. Authentication mode must be set to md5/text to configure the key chain.

Attribute Name: key-chain

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<level>

<type>level-1-2</type>

<type>level-1-2</type>

</config>

<key-chain>WORD</key-chain>

</config>

</authentication>

</level>

</levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

authentication key-chain WORD (level-1|level-2|)

IPI-ISIS-EXTENDED

Configure name

Specific prefixex allowed using this route map

This command is supported when following feature are enabled ISIS feature

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<fast-reroute-levels>

<fast-reroute>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

<route-maps>

<route-map>

</config>

</route-map>

</route-maps>

</fast-reroute>

</fast-reroute-levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

fast-reroute per-prefix (level-1|level-2) proto (ipv4) route-map WORD

Configure enable all prefixes

Apply on all prefixes

This command is supported when following feature are enabled ISIS feature

Attribute Name: enable-all-prefixes

Attribute Type: enum (all)

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<fast-reroute-levels>

<fast-reroute>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

<route-maps>

<route-map>

</config>

<enable-all-prefixes>all</enable-all-prefixes>

</route-map>

</route-maps>

</fast-reroute>

</fast-reroute-levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

fast-reroute per-prefix (level-1|level-2) proto (ipv4) (all)

Configure preference index

this index indicates which tie-break option to be given preference

This command is supported when following feature are enabled ISIS feature

Attribute Name: preference-index

Attribute Type: uint32

Attribute Range: 1-255

Netconf edit-config payload

<isis-instances>

<isis-instance>

</config>

<fast-reroute-levels>

<fast-reroute>

<level-type>level-1</level-type>

<level-type>level-1</level-type>

</config>

<preference-value>primary-path</preference-value>

<preference-value>primary-path</preference-value>

<lfa-protocol>ipv4</lfa-protocol>

</config>

<lfa-protocol>ipv4</lfa-protocol>

<preference-index>1</preference-index>

</protocol>

</protocols>

</fast-reroute>

</fast-reroute-levels>

</isis-instance>

</isis-instances>

</isis>

Command Syntax

Configure grace period

The period within which ISIS should come up

Attribute Name: grace-period

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<graceful-restart>

<grace-period>1</grace-period>

</config>

</graceful-restart>

</isis>

Command Syntax

isis restart grace-period <1-65535>

Configure enable helper only

Attribute to configure helper mode

Attribute Name: enable-helper-only

Attribute Type: empty

Netconf edit-config payload

<graceful-restart>

</enable-helper-only>

</config>

</graceful-restart>

</isis>

Command Syntax

isis restart helper

Configure suppress adjacency

When set to true, adjacency is not advertised. The SA bit is used by a starting router to request that its neighbor suppress advertisement of the adjacency to the starting router in the neighbor’s LSPs.

Attribute Name: suppress-adjacency

Attribute Type: empty

Netconf edit-config payload

<graceful-restart>

</suppress-adjacency>

</config>

</graceful-restart>

</isis>

Command Syntax

isis restart suppress-adjacency

restart isis graceful (grace-period <1-65535>|)

Attribute Name: grace-period

Attribute Type: uint16

Attribute Range: 1-65535

Netconf RPC payload

<ipi-isis-extended_isis-restart-graceful xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<grace-period>1</grace-period>

</ipi-isis-extended_isis-restart-graceful>

Command Syntax

restart isis graceful (grace-period <1-65535>|)

IPI-ISIS-INTERFACE

Configure minimal

Use this attribute to set the minimal Hello interval in seconds.

Attribute Name: minimal

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

</interface>

</interfaces>

</isis>

Command Syntax

isis hello-interval minimal level-1

Configure name

Use this attribute to set the minimal Hello interval in seconds.

Attribute Name: minimal

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

</interface>

</interfaces>

</isis>

Command Syntax

isis hello-interval minimal level-2

Configure send only

Use this attribute to set the send-only option to the interface-related packets. Use this attribute before configuring the ISIS authentication mode and ISIS authentication key-chain, so that the implementation of authentication goes smoothly. That is, the routers will have more time for the keys to be configured on each router if authentication is inserted only on the packets being sent, not checked on packets being received. After all routers that must communicate are configured with this attribute, enable the authentication mode and key chain on each router.

Attribute Name: send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

<send-only>3</send-only>

</interface>

</interfaces>

</isis>

Command Syntax

isis authentication send-only level-1

Configure interface send-only

Attribute Name: send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

<send-only>3</send-only>

</interface>

</interfaces>

</isis>

Command Syntax

isis authentication send-only level-2

Configure interface minimal

Use this attribute to set the minimal Hello interval in seconds.

Attribute Name: minimal

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

<minimal>level-1-2</minimal>

</interface>

</interfaces>

</isis>

Command Syntax

isis hello-interval minimal (level-1-only|level-2-only|)

Configure interface send-only

Attribute Name: send-only

Attribute Type: enum (level-1-only|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

<send-only>level-1-2</send-only>

</interface>

</interfaces>

</isis>

Command Syntax

isis authentication send-only (level-1-only|level-2-only|level-1-2|)

Configure maximum bandwidth flex algo

Interface ASLA maximum bandwidth value for IGP Flexible Algorithm. The bandwidth input ranges are 1 to 999 Kbps, 1 to 999 Mbps and 1 to 100 Gbps.

Attribute Name: maximum-bandwidth-flex-algo

Attribute Type: string

Netconf edit-config payload

</config>

<maximum-bandwidth-flex-algo>BANDWIDTH</maximum-bandwidth-flex-algo>

</interface>

</interfaces>

</isis>

Command Syntax

maximum-bandwidth flex-algo BANDWIDTH

Configure disable asla usage flex algo

Use this attribute to disable ASLA Link attributes usage for flexible-algorithm on this Link. The command with no keyword enables the ASLA usage

Attribute Name: disable-asla-usage-flex-algo

Attribute Type: empty

Netconf edit-config payload

</config>

</disable-asla-usage-flex-algo>

</interface>

</interfaces>

</isis>

Command Syntax

disable asla flex-algo

Configure disable padding

Use this attribute to configure/unconfigure the padding of the ISIS Hello packet. ISIS pads the Hello packet by default to notify neighbors of the supported MTU size.

Attribute Name: disable-padding

Attribute Type: uint8

Netconf edit-config payload

</config>

<interface-parameters>

</disable-padding>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

no isis hello padding

Configure interface-parameters disable-padding

Use this attribute to configure/unconfigure the padding of the ISIS Hello packet. ISIS pads the Hello packet by default to notify neighbors of the supported MTU size.

Attribute Name: disable-padding

Attribute Type: uint8

Netconf edit-config payload

</config>

<interface-parameters>

</disable-padding>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

no isis hello padding

Configure network type

Use this attribute to change a broadcast interface network type to a point-to-point network type and vice-versa.

Attribute Name: network-type

Attribute Type: enum (broadcast|point-to-point)

Netconf edit-config payload

</config>

<interface-parameters>

<network-type>broadcast</network-type>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis network (broadcast|point-to-point)

Configure circuit type

Use this attribute to set the circuit type for the interface. If level-1 or level-2-only is specified in this attribute, ISIS sends only the specified level of PDUs. On the point-to-point interface, there is only one type of Hello packet, so in this case ISIS Hello will be sent regardless of circuit-type. If istype is configured as level-1 or level-2 only, routing for this instance is performed for only the specified level. In this manner, only the particular level of PDU is sent on the interface.

Attribute Name: circuit-type

Attribute Type: enum (level-1|level-2-only|level-1-2)

Default Value: level-1-2

Netconf edit-config payload

</config>

<interface-parameters>

<circuit-type>level-1-2</circuit-type>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis circuit-type (level-1|level-2-only|level-1-2)

Configure ipv4 instance tag

Use this attribute to enable ISIS IPv4 routing on the interface. This attribute is mandatory to ISIS configuration. Match the ISIS instance tag to one of existing instance.s tags, or a new instance with the tag name should be initiated, otherwise routing will not run on this interface. Configuring this attribute, the router sends ISIS Hello with IP address TLV on this interface, and IP reachability information TLV in the LSP will be updated.

Attribute Name: ipv4-instance-tag

Attribute Type: string

Netconf edit-config payload

</config>

<interface-parameters>

<ipv4-instance-tag>WORD</ipv4-instance-tag>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

ip router isis WORD

Configure ipv6 instance tag

Use this attribute to enable ISIS IPv6 routing on the interface. This attribute is mandatory to IPv6 ISIS configuration. Match the ISIS instance tag to one of existing instance.s tags, or a new instance with the tag name should be initiated, otherwise routing will not run on this interface.Configuring this attribute, the router sends ISIS Hello with IPv6 address TLV on this interface, and IPv6 reachability information TLV in the LSP will be updated.

Attribute Name: ipv6-instance-tag

Attribute Type: string

Netconf edit-config payload

</config>

<interface-parameters>

<ipv6-instance-tag>WORD</ipv6-instance-tag>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

ipv6 router isis WORD

Configure lsp interval

Use this attribute to set the Link State Packet (LSP) transmission interval. Configuring this attribute changes the minimum interval between two consecutive LSP transmission. When flooding or some other event triggers LSP to transmit, the LSP is put on the interface queue and scheduled to transmit according to this interval. Two consecutive LSP transmissions are scheduled to have at least this interval.

Attribute Name: lsp-interval

Attribute Type: uint32

Default Value: 33

Attribute Range: 1-4294967295

Netconf edit-config payload

</config>

<interface-parameters>

<lsp-interval>1</lsp-interval>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis lsp-interval <1-4294967295>

Configure retransmit interval

Interval between retransmissions of the same LSP in seconds

Attribute Name: retransmit-interval

Attribute Type: uint16

Default Value: 5

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-parameters>

<retransmit-interval>1</retransmit-interval>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis retransmit-interval <1-65535>

Configure mesh group id

Use this attribute to specify to block LSPs on the current interface. If an interface is configured as mesh group blocked,. the standard LSP database synchronization process is applied if the interface receives CSNP or PSNP.

Attribute Name: mesh-group-id

Attribute Type: union

Netconf edit-config payload

</config>

<interface-parameters>

<mesh-group-id>blocked</mesh-group-id>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis mesh-group (blocked|<1-4294967295>)

Configure delay normalize interval

The value of the normalization interval for measured delay

Attribute Name: delay-normalize-interval

Attribute Type: uint32

Attribute Range: 1-2147483

Netconf edit-config payload

</config>

<interface-parameters>

<delay-normalize-interval>1</delay-normalize-interval>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

normalize delay isis <1-2147483>

Configure delay normalize offset

The value of the normalization interval for measured delay

Attribute Name: delay-normalize-offset

Attribute Type: uint32

Attribute Range: 1-2147483

Netconf edit-config payload

</config>

<interface-parameters>

<delay-normalize-offset>1</delay-normalize-offset>

</config>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

normalize delay isis <1-2147483>

Configure enable

Use this attribute to enable the BFD check on interface.

This command is supported when following feature are enabled

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-parameters>

<bfd>

</enable>

</config>

</bfd>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis bfd

Configure disable

Use this attribute to disable the BFD check on interface.

This command is supported when following feature are enabled

Attribute Name: disable

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-parameters>

<bfd>

</disable>

</config>

</bfd>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis bfd disable

Configure disable level 1

Use this attribute to disable frr on an interface for level-1.

Attribute Name: disable-level-1

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-parameters>

<fast-re-route>

</disable-level-1>

</config>

</fast-re-route>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis fast-reroute per-prefix candidate disable level-1

Configure disable level 2

Use this attribute to disable frr on an interface for level-2.

Attribute Name: disable-level-2

Attribute Type: empty

Netconf edit-config payload

</config>

<interface-parameters>

<fast-re-route>

</disable-level-2>

</config>

</fast-re-route>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis fast-reroute per-prefix candidate disable level-2

Configure hello interval

Use this attribute to set the Hello interval in seconds. The Hello-interval is set with the hello-multiplier. Configuring this attribute changes the time interval between two consecutive Hello transmissions. If a device receives its own LSP with a maximum sequence number, then it suspends ISIS for the hold interval. DIS sends Hello transmissions at three times the rate than non-DIS. If ISIS is elected as DIS on this interface, ISIS sends Hello every 3.3 seconds. If minimal keyword is specified, Holding timer in Hello PDU is set to 1 second and Hello interval is calculated by dividing by the hello-multiplier.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<hello-interval>1</hello-interval>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis hello-interval <1-65535> (level-1|level-2|)

Configure hello multiplier

Use this attribute to set multiplier for Hello holding time. Changes Holding Timer in Hello PDU. Holding timer is calculated by .Hello-Interval. multiplied by this value. If minimal keyword is specified with the Hello-Interval, the holding timer is set to 1 second and the hello-interval is calculated by dividing 1 by this value.

Attribute Name: hello-multiplier

Attribute Type: uint8

Default Value: 3

Attribute Range: 2-100

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<hello-multiplier>2</hello-multiplier>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis hello-multiplier <2-100> (level-1|level-2|)

Configure csnp interval

Use this attribute to set CSNP (Complete sequence number PDU) interval in seconds.Configuring this attribute changes the interval between two consecutive CSNP transmission. By default, CSNP is sent every 10 seconds only by LAN DIS. This parameter is only valid on broadcast interface, since periodic CSNP is only sent on broadcast interface, while CSNP on Point-to-Point interface is sent only when adjacency is initiated.

Attribute Name: csnp-interval

Attribute Type: uint16

Default Value: 10

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<csnp-interval>1</csnp-interval>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis csnp-interval <1-65535> (level-1|level-2|)

Configure priority

Use this attribute to set the priority for LAN DIS election. This attribute changes the priority value in LAN ISIS Hello PDUs. A lower priority value is less preferred in DIS election, and a higher priority value is more preferred

Attribute Name: priority

Attribute Type: uint8

Default Value: 64

Attribute Range: 0-127

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis priority <0-127> (level-1|level-2|)

Configure metric

Use this attribute to set default metric for the interface. The interface default metric is put into IP reachability information TLVs, IS reachability information TLVs and IPv6 reachability TLVs in LSPs. The value is used for SPF calculation, and is applied when the metric-style is configured as .narrow.

Attribute Name: metric

Attribute Type: uint8

Default Value: 10

Attribute Range: 1-63

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis metric <1-63> (level-1|level-2|)

Configure password

Use this attribute to set the authentication password of Hello PDU on the interface.

Attribute Name: password

Attribute Type: string

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis password WORD (level-1|level-2|)

Configure tag

Use this attribute to sets the tag for link-state packets (LSPs) sent out advertising routes for networks directly connected to an interface. If you do not specify a parameter, then the tag value is set for level-1-2 boundary

Attribute Name: tag

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis tag <1-4294967295> (level-1|level-2|)

Configure wide metric

Use this attribute to set wide metric for the interface. Interface wide-metric is put into Extended IP reachability TLVs, Extended IS reachability TLVs and IPv6 reachability TLVs in LSPs. The value is used for SPF calculation. This value is applied when metric-style is configured as ’wide’.

Attribute Name: wide-metric

Attribute Type: uint32

Default Value: 10

Attribute Range: 1-16777214

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<wide-metric>1</wide-metric>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis wide-metric <1-16777214> (level-1|level-2|)

Configure restart hello interval

Use this attribute to configure the T1 timer, interval of ISIS Hello packet with restart TLV.

Attribute Name: restart-hello-interval

Attribute Type: uint16

Default Value: 3

Attribute Range: 1-65535

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<restart-hello-interval>1</restart-hello-interval>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis restart-hello-interval <1-65535> (level-1|level-2|)

Configure te minimum delay

Interface minimum delay value in microseconds.

Attribute Name: te-minimum-delay

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<te-minimum-delay>1</te-minimum-delay>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis te-minimum-delay <1-16777215> (level-1|level-2|)

Configure te maximum delay

Interface maximum delay value in microseconds.

Attribute Name: te-maximum-delay

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<te-maximum-delay>1</te-maximum-delay>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis te-maximum-delay <1-16777215> (level-1|level-2|)

Configure te minimum delay flex algo

Interface minimum delay value for IGP Flexible Algorithm in microseconds.

Attribute Name: te-minimum-delay-flex-algo

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<te-minimum-delay-flex-algo>1</te-minimum-delay-flex-algo>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis te-minimum-delay flex-algo <1-16777215> (level-1|level-2|)

Configure te maximum delay flex algo

Interface maximum delay value for IGP Flexible Algorithm in microseconds.

Attribute Name: te-maximum-delay-flex-algo

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<te-maximum-delay-flex-algo>1</te-maximum-delay-flex-algo>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis te-maximum-delay flex-algo <1-16777215> (level-1|level-2|)

Configure mode

Use this attribute to set the MD5 authentication mode.

Attribute Name: mode

Attribute Type: enum (md5|text)

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

</config>

</authentication>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis authentication mode (md5|text) (level-1|level-2|)

Configure key chain

Use this attribute to set the key chain to be used for authentication on the interface-related packets.Authentication mode must be set to md5/text to configure the key chain.Only one authentication key-chain is applied to an ISIS interface at a time. Authentication can be specified for an entire instance of ISIS, instead of at the interface level, by setting the authentication key-chain attribute at global level.

Attribute Name: key-chain

Attribute Type: string

Netconf edit-config payload

</config>

<interface-parameters>

<level-infos>

<level-info>

<level>level-1-2</level>

<level>level-1-2</level>

</config>

<key-chain>WORD</key-chain>

</config>

</authentication>

</level-info>

</level-infos>

</interface-parameters>

</interface>

</interfaces>

</isis>

Command Syntax

isis authentication key-chain WORD (level-1|level-2|)

clear isis interface counter (IFNAME|)

Attribute Name: name

Attribute Type: string

Netconf RPC payload

<ipi-isis-interface_isis-clear-interface-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-isis">

<name>IFNAME</name>

</ipi-isis-interface_isis-clear-interface-counters>

Command Syntax

clear isis interface counter (IFNAME|)

IPI-KEYCHAIN

Configure name

key-chain name

Attribute Name: name

Attribute Type: string

Netconf edit-config payload

<key-chains xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-keychain">

<key-chain>

</config>

</key-chain>

</key-chains>

Command Syntax

key chain WORD

Configure key id

Use this attribute to manageCOMMA add or delete authentication keys in a key-chain

Attribute Name: key-id

Attribute Type: uint32

Attribute Range: 0-2147483647

Netconf edit-config payload

<key-chains xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-keychain">

<key-chain>

</config>

<keys>

<key-list>

<key-id>0</key-id>

<key-id>0</key-id>

</config>

</key-list>

</keys>

</key-chain>

</key-chains>

Command Syntax

key-id <0-2147483647>

Configure key string

Use this attribute to define a password to be used by a key

Attribute Name: key-string

Attribute Type: string

Attribute Range: 1-80

Netconf edit-config payload

<key-chains xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-keychain">

<key-chain>

</config>

<keys>

<key-list>

<key-id>0</key-id>

<key-id>0</key-id>

</config>

<key-string>WORD</key-string>

</key-list>

</keys>

</key-chain>

</key-chains>

Command Syntax

key-string WORD

Configure encrypted

Use this attribute to pass the key string in hexadecimal string format

Attribute Name: encrypted

Attribute Type: string

Attribute Range: 18-218

Netconf edit-config payload

<key-chains xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-keychain">

<key-chain>

</config>

<keys>

<key-list>

<key-id>0</key-id>

<key-id>0</key-id>

</config>

</key-list>

</keys>

</key-chain>

</key-chains>

Command Syntax

key-string encrypted WORD

IPI-PIM

Configure bfd

Use this attribute to debug the PIM BFD feature.

This command is supported when following feature are enabled Bidirectional Forwarding Detection (BFD)

Attribute Name: bfd

Attribute Type: empty

Netconf edit-config payload

<debug>

</bfd>

</config>

</debug>

</pim>

Command Syntax

debug pim bfd

IPI-PIM-IPV4

Configure router id

Use this attribute to configure PIM router-ID to uniquely identify the router.By default, PIM registers for the NSM router-id service. This attribute will override the router-id received from NSM.

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<router-id>A.B.C.D</router-id>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) router-id A.B.C.D

Configure join prune interval

Use this attribute to set a PIM join/prune timer.

Attribute Name: join-prune-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<join-prune-interval>1</join-prune-interval>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) jp-timer <1-65535>

Configure ecmp bundle

Use this attribute to create an ECMP bundle.

Attribute Name: ecmp-bundle

Attribute Type: string

Attribute Range: 1-50

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ecmp-bundle>WORD</ecmp-bundle>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) ecmp-bundle WORD

Configure enable bfd all interfaces

Use this attribute to enable Bidirectional Forwarding Detection (BFD) on all interfaces.

Attribute Name: enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-bfd-all-interfaces>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) bfd all-interfaces

Configure register reachability check

Use this attribute to enable the RP reachability check for PIM Registers at the designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: register-reachability-check

Attribute Type: enum (disable|enable)

Default Value: enable

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<register-reachability-check>enable</register-reachability-check>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) register-rp-reachability (disable|enable)

Configure rate limit

Use this attribute to configure the rate of register packets sent by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: rate-limit

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<rate-limit>1</rate-limit>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) register-rate-limit <1-65535>

Configure suppress interval

Use this attribute to configure the register suppression time.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: suppress-interval

Attribute Type: uint16

Default Value: 60

Attribute Range: 11-65535

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<suppress-interval>11</suppress-interval>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) register-suppression <11-65535>

Configure keep alive interval

Use this attribute to configure a Keep alive Timer (KAT) value for (S,G) states at RP to monitor PIM register packets.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: keep-alive-interval

Attribute Type: uint16

Default Value: 185

Attribute Range: 1-65535

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<keep-alive-interval>1</keep-alive-interval>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-register-kat <1-65535>

Configure source address

Use this attribute to configure the source address of register packets sent by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: source-address

Attribute Type: union

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<source-address>PIM_IPV4_REG_SOURCE_T</source-address>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) register-source (A.B.C.D|IFNAME)

Configure accept register

Use this attribute to configure the ACL of register packets accepted by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: accept-register

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<accept-register>WORD</accept-register>

</config>

</register-packet>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) accept-register list WORD

Configure ignore rp set priority

Use this attribute to ignore the RP-SET priority value, and use only the hashing mechanism for RP selection. This is used to inter-operate with older Cisco IOS versions.

Attribute Name: ignore-rp-set-priority

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</ignore-rp-set-priority>

</config>

</interop>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) ignore-rp-set-priority

Configure cisco bsr interop enable

Use this attribute to turn on or turn the Candidate-RP debugging timerworking with Cisco BSR.

Attribute Name: cisco-bsr-interop-enable

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</cisco-bsr-interop-enable>

</config>

</interop>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) crp-cisco-prefix

Configure access control list

Use this attribute to configure the option to calculate the register checksum over the whole packet on multicast groups specified by the access control list.

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: cisco-register-checksum-enable

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

</cisco-register-checksum-enable>

<access-control-list>WORD</access-control-list>

</config>

</register-packet>

</interop>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) cisco-register-checksum group-list WORD

Configure cisco register checksum enable

Use this attribute to configure the option to calculate the register checksum over the whole packet. This is used to inter-operate with older Cisco IOS versions.

Attribute Name: cisco-register-checksum-enable

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

</cisco-register-checksum-enable>

</config>

</register-packet>

</interop>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) cisco-register-checksum

Configure vrf name

Use this attribute to to enable the ability of the last-hop PIM router to switch to SPT for multicast group addresses indicated by the given standard access control list.

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<spt-switch>

</enable>

<access-control-list>WORD</access-control-list>

</config>

</spt-switch>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) spt-threshold group-list WORD

Configure enable

Use this attribute to enable the ability of the last-hop PIM router to switch to SPT.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<spt-switch>

</enable>

</config>

</spt-switch>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) spt-threshold

Configure range policy

Use this attribute to set Source Specific Multicast (SSM) and define the range of multicast IP addresses. Ranges can be either the default, which defines the SSM range as 232/8, or indicated by the given standard access control list.

This command is supported when following feature are enabled PIM Source Specific Multicast (SSM)

Attribute Name: range-policy

Attribute Type: union

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ssm>

<range-policy>PIM_IPV4_SSM_RANGE_POLICY_TYPE_T</range-policy>

</config>

</ssm>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) ssm (range WORD|default)

Configure member rp address

Destination IP address where register messages are copied and sent. A Member RP is an individual RP member in the anycast RP set.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: member-rp-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<anycast-rps>

<anycast-rp>

<member-rp-address>A.B.C.D</member-rp-address>

<member-rp-address>A.B.C.D</member-rp-address>

<anycast-rp-address>A.B.C.D</anycast-rp-address>

</config>

<anycast-rp-address>A.B.C.D</anycast-rp-address>

</anycast-rp>

</anycast-rps>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) anycast-rp A.B.C.D A.B.C.D

Configure rp address

Use this attribute to statically configure Rendezvous Point (RP) address for multicast groups.

Attribute Name: rp-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>A.B.C.D</rp-address>

<rp-address>A.B.C.D</rp-address>

</config>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-address A.B.C.D

Configure override dynamically learned rp

Use this attribute do configure the flag to overrides dynamically learned RP mappings.

Attribute Name: override-dynamically-learned-rp

Attribute Type: empty

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>A.B.C.D</rp-address>

<rp-address>A.B.C.D</rp-address>

<access-control-list>WORD</access-control-list>

</config>

</override-dynamically-learned-rp>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-address A.B.C.D WORD override

Configure static-rp-default access-control-list

Use this attribute to configure the name of access control list (ACL).

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>A.B.C.D</rp-address>

<rp-address>A.B.C.D</rp-address>

</config>

<access-control-list>WORD</access-control-list>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-address A.B.C.D WORD

Configure static-rp-default override-dynamically-learned-rp

Use this attribute do configure the flag to overrides dynamically learned RP mappings.

Attribute Name: override-dynamically-learned-rp

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>A.B.C.D</rp-address>

<rp-address>A.B.C.D</rp-address>

</config>

</override-dynamically-learned-rp>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-address A.B.C.D override

Configure interface name

Use this attribute to configure the interface for the candidate BSR router.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) bsr-candidate IFNAME

Configure hash mask length

Use this attribute to configure the mask length used to calculate the group address for RP.

Attribute Name: hash-mask-length

Attribute Type: uint8

Attribute Range: 0-32

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

<hash-mask-length>0</hash-mask-length>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) bsr-candidate IFNAME <0-32>

Configure priority

Use this attribute to configure the priority value for candidate BSR router.

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: hash-mask-length

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

<hash-mask-length>0</hash-mask-length>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) bsr-candidate IFNAME <0-32> <0-255>

Configure bsr-candidate interface-name

Use this attribute to configure the interface for the candidate BSR router.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) bsr-candidate IFNAME

Configure rp-candidates interface-name

Use this attribute to configure the interface name for RP.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<rp-candidates>

<rp-candidate>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

</config>

</rp-candidate>

</rp-candidates>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-candidate IFNAME

Configure advertisement interval

Use this attribute to configure the priority value for RP candidate.

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: advertisement-interval

Attribute Type: uint16

Attribute Range: 1-16383

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<rp-candidates>

<rp-candidate>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

<access-control-list>WORD</access-control-list>

<advertisement-interval>1</advertisement-interval>

</config>

</rp-candidate>

</rp-candidates>

</rendezvous-point>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip pim (vrf NAME|) rp-candidate IFNAME (group-list WORD|) (interval <1-16383>|) (priority <0-255>|)

Configure originator id

Use this attribute to allow a Multicast Source Discovery Protocol (MSDP) speaker that originates a Source-Active (SA) message to use the IP address of an interface as a rendezvous point (RP) address in the SA message.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: originator-id

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<originator-id>IFNAME</originator-id>

</config>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) originator-id IFNAME

Configure group address

Use this attribute to configure an Multicast Source Discovery Protocol (MSDP) remote group.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: rp-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<source-active-entries>

<source-active-entry>

<group-address>A.B.C.D</group-address>

<group-address>A.B.C.D</group-address>

<source-address>A.B.C.D</source-address>

<rp-address>A.B.C.D</rp-address>

</config>

<source-address>A.B.C.D</source-address>

</source-active-entry>

</source-active-entries>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) sa s A.B.C.D g A.B.C.D r A.B.C.D

Configure address

Use this attribute to configure an Multicast Source Discovery Protocol (MSDP) peer relationship.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

</config>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) peer A.B.C.D

Configure mesh group

Use this attribute to configure an Multicast Source Discovery Protocol (MSDP) peer relationship.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: address

Attribute Type: inet:ipv4-address

Attribute Name: mesh-group

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

<peer>

<mesh-group>WORD</mesh-group>

</config>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) mesh-group WORD A.B.C.D

Configure default peer

Use this attribute to configure an Multicast Source Discovery Protocol (MSDP) peer relationship.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: address

Attribute Type: inet:ipv4-address

Attribute Name: default-peer

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

<peer>

</default-peer>

</config>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) default-peer A.B.C.D

Configure prefix list

Use this attribute to set a Multicast Source Discovery Protocol (MSDP) peer from which to accept Source-Active (SA) messages.You can have multiple active default peers: 1. When you enter multiple ip msdp default-peer commands with a prefix-list keyword, all the default peers are used at the same time for different RP prefixes. This form is typically used in a service provider cloud that connects stub site clouds. 2. When you enter multiple ip msdp default-peer commands without a prefix-list keyword, a single active peer accepts all SA messages. If that peer fails, the next configured default peer accepts all SA messages. This form is typically used at a stub site.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: prefix-list

Attribute Type: union

Attribute Name: default-peer

Attribute Type: empty

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

<peer>

</default-peer>

</config>

<prefix-list>PIM_IPV4_MSDP_PEER_ACL_T</prefix-list>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) default-peer A.B.C.D prefix-list (WORD|<1-99>)

Configure peer source-address

Use this attribute to configure an Multicast Source Discovery Protocol (MSDP) peer relationship.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: source-address

Attribute Type: union

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

<peer>

</config>

<source-address>PIM_IPV4_REG_SOURCE_T</source-address>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) peer A.B.C.D connect-source (A.B.C.D|IFNAME)

Configure password

Use this command to set an password key used for authenticating a Multicast Source Discovery Protocol (MSDP) peer. By default, no password is enabled.

This command is supported when following feature are enabled HAVE_PIM_MSDP

Attribute Name: password

Attribute Type: string

Attribute Range: 1-218

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<msdp>

<peers>

<peer>

</config>

</config>

</authentication>

</peer>

</peers>

</msdp>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

ip msdp (vrf NAME|) password WORD peer A.B.C.D

Configure options

Use this attribute to debug the PIM IPv4 feature.

Attribute Name: options

Netconf edit-config payload

<ipv4>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<debug>

</config>

</debug>

</instance>

</instances>

</ipv4>

</pim>

Command Syntax

Configure passive enable

PIM IPv4 passive mode.

Attribute Name: passive-enable

Attribute Type: empty

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf edit-config payload

<ipv4>

<pim-mode>dense-mode</pim-mode>

</config>

</passive-enable>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim (dense-mode|sparse-mode) passive

Configure pim mode

PIM IPv4 mode to use when delivering multicast traffic via this interface.

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf edit-config payload

<ipv4>

</config>

<pim-mode>dense-mode</pim-mode>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim (dense-mode|sparse-mode)

Configure bsr border

When set to true the device will not send bootstrap router messages over this interface. By default these are transmitted over all PIM IPv4 sparse mode (PIM-SM) enabled interfaces.

Attribute Name: bsr-border

Attribute Type: empty

Netconf edit-config payload

<ipv4>

</config>

</bsr-border>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim bsr-border

Configure dr priority

The designated router priority of this interface. Larger always preferred.

Attribute Name: dr-priority

Attribute Type: uint32

Attribute Range: 0-4294967294

Netconf edit-config payload

<ipv4>

</config>

<dr-priority>0</dr-priority>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim dr-priority <0-4294967294>

Configure hello interval

Use this attribute to configure a hello interval value other than the default. When a hello-interval is configured and hello-holdtime is not configured, or when the hello-holdtime value configured is less than the new hello-interval value, the holdtime value is modified to (3.5 * hello_interval). Otherwise, the hello-holdtime value is the configured value.

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 30

Attribute Range: 1-18724

Netconf edit-config payload

<ipv4>

</config>

<hello-interval>1</hello-interval>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim hello-interval <1-18724>

Configure hello holdtime

Use this attribute to configure a hello message holdtime other than the default.

Attribute Name: hello-holdtime

Attribute Type: uint16

Default Value: 105

Attribute Range: 1-65535

Netconf edit-config payload

<ipv4>

</config>

<hello-holdtime>1</hello-holdtime>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim hello-holdtime <1-65535>

Configure exclude generated id

Exclude Gen-id option from PIM IPv4 Hello packets on this interface.

Attribute Name: exclude-generated-id

Attribute Type: empty

Netconf edit-config payload

<ipv4>

</config>

</exclude-generated-id>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim exclude-genid

Configure unicast bootstrap router

Use this attribute to enable support for sending and receiving unicast Bootstrap Messages (BSM) on an interface.

Attribute Name: unicast-bootstrap-router

Attribute Type: empty

Netconf edit-config payload

<ipv4>

</config>

</unicast-bootstrap-router>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim unicast-bsm

Configure neighbor access control list filter

Use this attribute to enable filtering of neighbors on the interface. When configuring a neighbor filter, PIM IPv4 either not establishes adjacency with neighbor or terminates adjacency with existing neighbors, when denied by filtering access list.

Attribute Name: neighbor-access-control-list-filter

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv4>

</config>

<neighbor-access-control-list-filter>WORD</neighbor-access-control-list-filter>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim neighbor-filter WORD

Configure state refresh origination interval

Use this attribute to configure a PIM-DM State-Refresh origination interval other than the default value. The origination interval is the number of seconds between PIM-DM State Refresh control messages.

Attribute Name: state-refresh-origination-interval

Attribute Type: uint16

Default Value: 60

Attribute Range: 1-100

Netconf edit-config payload

<ipv4>

</config>

<state-refresh-origination-interval>1</state-refresh-origination-interval>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim state-refresh origination-interval <1-100>

Configure name

Use this attribute to configure an ECMP bundle.

Attribute Name: ecmp-bundle

Attribute Type: string

Attribute Range: 1-50

Netconf edit-config payload

<ipv4>

</config>

<ecmp-bundle>WORD</ecmp-bundle>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim bind ecmp-bundle WORD

Configure propagation delay

Propagation-delay value.

Attribute Name: propagation-delay

Attribute Type: uint16

Default Value: 1000

Attribute Range: 0-32767

Netconf edit-config payload

<ipv4>

</config>

<propagation-delay>0</propagation-delay>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim propagation-delay <0-32767>

Configure enable bfd

Use this attribute to configure Bidirectional Forwarding Detection.

Attribute Name: enable-bfd

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<ipv4>

</config>

<enable-bfd>enable</enable-bfd>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim bfd (disable|)

Configure virtual router id

Use this attribute to set the designated router’s priority value.

This command is supported when following feature are enabled HAVE_PIM_SM_VRRP_AWARE

Attribute Name: dr-priority

Attribute Type: uint32

Attribute Range: 0-4294967294

Attribute Name: virtual-router-id

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ipv4>

</config>

<pim-redundancy>

<vrrp>

<virtual-router-id>1</virtual-router-id>

<dr-priority>0</dr-priority>

</config>

</vrrp>

</pim-redundancy>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim redundancy <1-255> vrrp dr-priority <0-4294967294>

Configure vrrp virtual-router-id

Use this attribute to set virtual router identifier value.

This command is supported when following feature are enabled HAVE_PIM_SM_VRRP_AWARE

Attribute Name: virtual-router-id

Attribute Type: uint8

Attribute Range: 1-255

Attribute Name: dr-priority

Attribute Type: uint32

Attribute Range: 0-4294967294

Netconf edit-config payload

<ipv4>

</config>

<pim-redundancy>

<vrrp>

<dr-priority>0</dr-priority>

<virtual-router-id>1</virtual-router-id>

</config>

</vrrp>

</pim-redundancy>

</interface>

</interfaces>

</ipv4>

</pim>

Command Syntax

ip pim redundancy <1-255> vrrp dr-priority <0-4294967294>

snmp restart pim

Netconf RPC payload

<ipi-pim-ipv4_pim-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim"/>

Command Syntax

snmp restart pim

clear ip pim (vrf NAME|) (sparse-mode) bsr rp-set *

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: pim-mode

Attribute Type: enum (sparse-mode)

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-bsr-rendezvous-point xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<pim-mode>sparse-mode</pim-mode>

</ipi-pim-ipv4_pim-ipv4-clear-bsr-rendezvous-point>

Command Syntax

clear ip pim (vrf NAME|) (sparse-mode) bsr rp-set *

clear ip mroute (vrf NAME|) * pim (dense-mode|sparse-mode)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-multicast-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<pim-mode>dense-mode</pim-mode>

</ipi-pim-ipv4_pim-ipv4-clear-multicast-route>

Command Syntax

clear ip mroute (vrf NAME|) * pim (dense-mode|sparse-mode)

clear ip mroute (vrf NAME|) A.B.C.D pim sparse-mode

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-multicast-route-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

</ipi-pim-ipv4_pim-ipv4-clear-multicast-route-source-group>

Command Syntax

clear ip mroute (vrf NAME|) A.B.C.D pim sparse-mode

clear ip mroute (vrf NAME|) A.B.C.D A.B.C.D pim (dense-mode|sparse-mode)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: source-address

Attribute Type: inet:ipv4-address

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-multicast-route-source-group-mode xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

<source-address>A.B.C.D</source-address>

<pim-mode>dense-mode</pim-mode>

</ipi-pim-ipv4_pim-ipv4-clear-multicast-route-source-group-mode>

Command Syntax

clear ip mroute (vrf NAME|) A.B.C.D A.B.C.D pim (dense-mode|sparse-mode)

clear ip msdp (vrf NAME|) peer (A.B.C.D|)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-msdp-peer xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

</ipi-pim-ipv4_pim-ipv4-clear-msdp-peer>

Command Syntax

clear ip msdp (vrf NAME|) peer (A.B.C.D|)

clear ip msdp (vrf NAME|) sa-cache (A.B.C.D|)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-pim-ipv4_pim-ipv4-clear-msdp-sa-cache xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

</ipi-pim-ipv4_pim-ipv4-clear-msdp-sa-cache>

Command Syntax

clear ip msdp (vrf NAME|) sa-cache (A.B.C.D|)

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-on>

Command Syntax

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-off>

Command Syntax

debug ip pim (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

</ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-all-on>

Command Syntax

debug ip pim (vrf NAME|)

no debug ip pim (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

</ipi-pim-ipv4-debug_pim-ipv4-terminal-debug-all-off>

Command Syntax

no debug ip pim (vrf NAME|)

IPI-PIM-IPV6

Configure router id

Use this attribute to configure PIM router-ID to uniquely identify the router.By default, PIM registers for the NSM router-id service. This attribute will override the router-id received from NSM.

Attribute Name: router-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<router-id>A.B.C.D</router-id>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) router-id A.B.C.D

Configure join prune interval

Use this attribute to set a PIM join/prune timer.

Attribute Name: join-prune-interval

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<join-prune-interval>1</join-prune-interval>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) jp-timer <1-65535>

Configure ecmp bundle

Use this attribute to create an ECMP bundle.

Attribute Name: ecmp-bundle

Attribute Type: string

Attribute Range: 1-50

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ecmp-bundle>WORD</ecmp-bundle>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) ecmp-bundle WORD

Configure enable bfd all interfaces

Use this attribute to enable Bidirectional Forwarding Detection (BFD) on all interfaces.

Attribute Name: enable-bfd-all-interfaces

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-bfd-all-interfaces>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) bfd all-interfaces

Configure register reachability check

Use this attribute to enable the RP reachability check for PIM Registers at the designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: register-reachability-check

Attribute Type: enum (disable|enable)

Default Value: enable

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<register-reachability-check>enable</register-reachability-check>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) register-rp-reachability (disable|enable)

Configure rate limit

Use this attribute to configure the rate of register packets sent by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: rate-limit

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<rate-limit>1</rate-limit>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) register-rate-limit <1-65535>

Configure suppress interval

Use this attribute to configure the register suppression time.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: suppress-interval

Attribute Type: uint16

Default Value: 60

Attribute Range: 11-65535

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<suppress-interval>11</suppress-interval>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) register-suppression <11-65535>

Configure keep alive interval

Use this attribute to configure a Keep alive Timer (KAT) value for (S,G) states at RP to monitor PIM register packets.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: keep-alive-interval

Attribute Type: uint16

Default Value: 185

Attribute Range: 1-65535

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<keep-alive-interval>1</keep-alive-interval>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-register-kat <1-65535>

Configure source address

Use this attribute to configure the source address of register packets sent by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: source-address

Attribute Type: union

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<source-address>PIM_IPV6_REG_SOURCE_T</source-address>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) register-source (X:X::X:X|IFNAME)

Configure accept register

Use this attribute to configure the ACL of register packets accepted by this designated router (DR).

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: accept-register

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

<accept-register>WORD</accept-register>

</config>

</register-packet>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) accept-register list WORD

Configure ignore rp set priority

Use this attribute to ignore the RP-SET priority value, and use only the hashing mechanism for RP selection. This is used to inter-operate with older Cisco IOS versions.

Attribute Name: ignore-rp-set-priority

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</ignore-rp-set-priority>

</config>

</interop>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) ignore-rp-set-priority

Configure cisco bsr interop enable

Use this attribute to turn on or turn the Candidate-RP debugging timerworking with Cisco BSR.

Attribute Name: cisco-bsr-interop-enable

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</cisco-bsr-interop-enable>

</config>

</interop>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) crp-cisco-prefix

Configure access control list

Use this attribute to configure the option to calculate the register checksum over the whole packet on multicast groups specified by the access control list.

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: cisco-register-checksum-enable

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

</cisco-register-checksum-enable>

<access-control-list>WORD</access-control-list>

</config>

</register-packet>

</interop>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) cisco-register-checksum group-list WORD

Configure cisco register checksum enable

Use this attribute to configure the option to calculate the register checksum over the whole packet. This is used to inter-operate with older Cisco IOS versions.

Attribute Name: cisco-register-checksum-enable

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<register-packet>

</cisco-register-checksum-enable>

</config>

</register-packet>

</interop>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) cisco-register-checksum

Configure vrf name

Use this attribute to to enable the ability of the last-hop PIM router to switch to SPT for multicast group addresses indicated by the given standard access control list.

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<spt-switch>

</enable>

<access-control-list>WORD</access-control-list>

</config>

</spt-switch>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) spt-threshold group-list WORD

Configure enable

Use this attribute to enable the ability of the last-hop PIM router to switch to SPT.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<spt-switch>

</enable>

</config>

</spt-switch>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) spt-threshold

Configure range policy

Use this attribute to set Source Specific Multicast (SSM) and define the range of multicast IP addresses. Ranges can be either the default, which defines the SSM range as FF3x::/96, or indicated by the given standard access control list.

This command is supported when following feature are enabled PIM Source Specific Multicast (SSM)

Attribute Name: range-policy

Attribute Type: union

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ssm>

<range-policy>PIM_IPV6_SSM_RANGE_POLICY_TYPE_T</range-policy>

</config>

</ssm>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) ssm (range WORD|default)

Configure member rp address

Destination IPv6 address where register messages are copied and sent. A Member RP is an individual RP member in the anycast RP set.

This command is supported when following feature are enabled PIM Sparse Mode (SM)

Attribute Name: member-rp-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<anycast-rps>

<anycast-rp>

<member-rp-address>X:X::X:X</member-rp-address>

<member-rp-address>X:X::X:X</member-rp-address>

<anycast-rp-address>X:X::X:X</anycast-rp-address>

</config>

<anycast-rp-address>X:X::X:X</anycast-rp-address>

</anycast-rp>

</anycast-rps>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) anycast-rp X:X::X:X X:X::X:X

Configure embed rp

Use this attribute to embed the PIM Rendezvous Point

Attribute Name: embed-rp

Attribute Type: enum (disable|enable)

Default Value: enable

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

</config>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp embedded (disable|enable)

Configure rp address

Use this attribute to statically configure Rendezvous Point (RP) address for multicast groups.

Attribute Name: rp-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>X:X::X:X</rp-address>

<rp-address>X:X::X:X</rp-address>

</config>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-address X:X::X:X

Configure override dynamically learned rp

Use this attribute do configure the flag to overrides dynamically learned RP mappings.

Attribute Name: override-dynamically-learned-rp

Attribute Type: empty

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>X:X::X:X</rp-address>

<rp-address>X:X::X:X</rp-address>

<access-control-list>WORD</access-control-list>

</config>

</override-dynamically-learned-rp>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-address X:X::X:X WORD override

Configure static-rp-default access-control-list

Use this attribute to configure the name of access control list (ACL).

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>X:X::X:X</rp-address>

<rp-address>X:X::X:X</rp-address>

</config>

<access-control-list>WORD</access-control-list>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-address X:X::X:X WORD

Configure static-rp-default override-dynamically-learned-rp

Use this attribute do configure the flag to overrides dynamically learned RP mappings.

Attribute Name: override-dynamically-learned-rp

Attribute Type: empty

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<static-rps>

<static-rps-default>

<static-rp-default>

<rp-address>X:X::X:X</rp-address>

<rp-address>X:X::X:X</rp-address>

</config>

</override-dynamically-learned-rp>

</static-rp-default>

</static-rps-default>

</static-rps>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-address X:X::X:X override

Configure interface name

Use this attribute to configure the interface for the candidate BSR router.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) bsr-candidate IFNAME

Configure hash mask length

Use this attribute to configure the mask length used to calculate the group address for RP.

Attribute Name: hash-mask-length

Attribute Type: uint8

Attribute Range: 0-32

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

<hash-mask-length>0</hash-mask-length>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) bsr-candidate IFNAME <0-32>

Configure priority

Use this attribute to configure the priority value for candidate BSR router.

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Attribute Name: hash-mask-length

Attribute Type: uint8

Attribute Range: 0-32

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

<hash-mask-length>0</hash-mask-length>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) bsr-candidate IFNAME <0-32> <0-255>

Configure bsr-candidate interface-name

Use this attribute to configure the interface for the candidate BSR router.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<bootstrap-router>

<bsr-candidate>

<interface-name>IFNAME</interface-name>

</config>

</bsr-candidate>

</bootstrap-router>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) bsr-candidate IFNAME

Configure rp-candidates interface-name

Use this attribute to configure the interface name for RP.

Attribute Name: interface-name

Attribute Type: string

Attribute Range: 1-33

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<rp-candidates>

<rp-candidate>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

</config>

</rp-candidate>

</rp-candidates>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-candidate IFNAME

Configure advertisement interval

Use this attribute to configure the priority value for RP candidate.

Attribute Name: priority

Attribute Type: uint8

Attribute Range: 0-255

Attribute Name: access-control-list

Attribute Type: string

Attribute Range: 1-64

Attribute Name: advertisement-interval

Attribute Type: uint16

Attribute Range: 1-16383

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<rendezvous-point>

<rp-candidates>

<rp-candidate>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

<access-control-list>WORD</access-control-list>

<advertisement-interval>1</advertisement-interval>

</config>

</rp-candidate>

</rp-candidates>

</rendezvous-point>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

ipv6 pim (vrf NAME|) rp-candidate IFNAME (group-list WORD|) (interval <1-16383>|) (priority <0-255>|)

Configure options

Use this attribute to debug the PIM IPv6 feature.

Attribute Name: options

Netconf edit-config payload

<ipv6>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<debug>

</config>

</debug>

</instance>

</instances>

</ipv6>

</pim>

Command Syntax

Configure passive enable

PIM IPv6 passive mode.

Attribute Name: passive-enable

Attribute Type: empty

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf edit-config payload

<ipv6>

<pim-mode>dense-mode</pim-mode>

</config>

</passive-enable>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim (dense-mode|sparse-mode) passive

Configure pim mode

PIM IPv6 mode to use when delivering multicast traffic via this interface.

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf edit-config payload

<ipv6>

</config>

<pim-mode>dense-mode</pim-mode>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim (dense-mode|sparse-mode)

Configure bsr border

When set to true the device will not send bootstrap router messages over this interface. By default these are transmitted over all PIM IPv6 sparse mode (PIM-SM) enabled interfaces.

Attribute Name: bsr-border

Attribute Type: empty

Netconf edit-config payload

<ipv6>

</config>

</bsr-border>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim bsr-border

Configure dr priority

The designated router priority of this interface. Larger always preferred.

Attribute Name: dr-priority

Attribute Type: uint32

Attribute Range: 0-4294967294

Netconf edit-config payload

<ipv6>

</config>

<dr-priority>0</dr-priority>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim dr-priority <0-4294967294>

Configure hello interval

Attribute Name: hello-interval

Attribute Type: uint16

Default Value: 30

Attribute Range: 1-18724

Netconf edit-config payload

<ipv6>

</config>

<hello-interval>1</hello-interval>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim hello-interval <1-18724>

Configure hello holdtime

Use this attribute to configure a hello message holdtime other than the default.

Attribute Name: hello-holdtime

Attribute Type: uint16

Default Value: 105

Attribute Range: 1-65535

Netconf edit-config payload

<ipv6>

</config>

<hello-holdtime>1</hello-holdtime>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim hello-holdtime <1-65535>

Configure exclude generated id

Exclude Gen-id option from PIM IPv6 Hello packets on this interface.

Attribute Name: exclude-generated-id

Attribute Type: empty

Netconf edit-config payload

<ipv6>

</config>

</exclude-generated-id>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim exclude-genid

Configure unicast bootstrap router

Use this attribute to enable support for sending and receiving unicast Bootstrap Messages (BSM) on an interface.

Attribute Name: unicast-bootstrap-router

Attribute Type: empty

Netconf edit-config payload

<ipv6>

</config>

</unicast-bootstrap-router>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim unicast-bsm

Configure neighbor access control list filter

Use this attribute to enable filtering of neighbors on the interface. When configuring a neighbor filter, PIM IPv6 either not establishes adjacency with neighbor or terminates adjacency with existing neighbors, when denied by filtering access list.

Attribute Name: neighbor-access-control-list-filter

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<ipv6>

</config>

<neighbor-access-control-list-filter>WORD</neighbor-access-control-list-filter>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim neighbor-filter WORD

Configure state refresh origination interval

Attribute Name: state-refresh-origination-interval

Attribute Type: uint16

Default Value: 60

Attribute Range: 1-100

Netconf edit-config payload

<ipv6>

</config>

<state-refresh-origination-interval>1</state-refresh-origination-interval>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim state-refresh origination-interval <1-100>

Configure name

Use this attribute to configure an ECMP bundle.

Attribute Name: ecmp-bundle

Attribute Type: string

Attribute Range: 1-50

Netconf edit-config payload

<ipv6>

</config>

<ecmp-bundle>WORD</ecmp-bundle>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim bind ecmp-bundle WORD

Configure propagation delay

Propagation-delay value.

Attribute Name: propagation-delay

Attribute Type: uint16

Default Value: 1000

Attribute Range: 0-32767

Netconf edit-config payload

<ipv6>

</config>

<propagation-delay>0</propagation-delay>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim propagation-delay <0-32767>

Configure enable bfd

Use this attribute to configure Bidirectional Forwarding Detection.

Attribute Name: enable-bfd

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<ipv6>

</config>

<enable-bfd>enable</enable-bfd>

</interface>

</interfaces>

</ipv6>

</pim>

Command Syntax

ipv6 pim bfd (disable|)

clear ipv6 pim (vrf NAME|) (sparse-mode) bsr rp-set *

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: pim-mode

Attribute Type: enum (sparse-mode)

Netconf RPC payload

<ipi-pim-ipv6_pim-ipv6-clear-bsr-rendezvous-point xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<pim-mode>sparse-mode</pim-mode>

</ipi-pim-ipv6_pim-ipv6-clear-bsr-rendezvous-point>

Command Syntax

clear ipv6 pim (vrf NAME|) (sparse-mode) bsr rp-set *

clear ipv6 mroute (vrf NAME|) * pim (dense-mode|sparse-mode)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf RPC payload

<ipi-pim-ipv6_pim-ipv6-clear-multicast-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<pim-mode>dense-mode</pim-mode>

</ipi-pim-ipv6_pim-ipv6-clear-multicast-route>

Command Syntax

clear ipv6 mroute (vrf NAME|) * pim (dense-mode|sparse-mode)

clear ipv6 mroute (vrf NAME|) X:X::X:X pim sparse-mode

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<ipi-pim-ipv6_pim-ipv6-clear-multicast-route-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

</ipi-pim-ipv6_pim-ipv6-clear-multicast-route-source-group>

Command Syntax

clear ipv6 mroute (vrf NAME|) X:X::X:X pim sparse-mode

clear ipv6 mroute (vrf NAME|) X:X::X:X X:X::X:X pim (dense-mode|sparse-mode)

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Attribute Name: source-address

Attribute Type: inet:ipv6-address

Attribute Name: pim-mode

Attribute Type: enum (dense-mode|sparse-mode)

Netconf RPC payload

<ipi-pim-ipv6_pim-ipv6-clear-multicast-route-source-group-mode xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

<source-address>X:X::X:X</source-address>

<pim-mode>dense-mode</pim-mode>

</ipi-pim-ipv6_pim-ipv6-clear-multicast-route-source-group-mode>

Command Syntax

clear ipv6 mroute (vrf NAME|) X:X::X:X X:X::X:X pim (dense-mode|sparse-mode)

debug pim bfd

Netconf RPC payload

<ipi-pim-debug_pim-terminal-debug-bfd-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim"/>

Command Syntax

debug pim bfd

no debug pim bfd

Netconf RPC payload

<ipi-pim-debug_pim-terminal-debug-bfd-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim"/>

Command Syntax

no debug pim bfd

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-on>

Command Syntax

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-off>

Command Syntax

debug ipv6 pim (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-all-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

</ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-all-on>

Command Syntax

debug ipv6 pim (vrf NAME|)

no debug ipv6 pim (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-pim">

<vrf-name>NAME</vrf-name>

</ipi-pim-ipv6-debug_pim-ipv6-terminal-debug-all-off>

Command Syntax

no debug ipv6 pim (vrf NAME|)

IPI-VXLAN

Configure mac address

Use this attribute to set the mac address with arp-nd refresh-timer

Attribute Name: mac-address

Attribute Type: string

Attribute Name: arp-nd-refresh-timer

Attribute Type: uint32

Attribute Range: 3-21600

Netconf edit-config payload

<arp-nd-refresh-timer>3</arp-nd-refresh-timer>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan arp-nd refresh-timer <3-21600> mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX)

Configure enable vxlan

Use this attribute to enable VxLAN module. Without this attribute vxlan functionality can not be achieved

Attribute Name: enable-vxlan

Attribute Type: empty

Netconf edit-config payload

</enable-vxlan>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan enable

Configure vtep ipv4

Use this attribute to set source vtep global ip address. This will be treated at vxlan tunnel source address

Attribute Name: vtep-ipv4

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vtep-ipv4>A.B.C.D</vtep-ipv4>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan vtep-ip-global A.B.C.D

Configure mac ageing timer

Use this attribute to set the time till a learned mac address will persist after last update

Attribute Name: mac-ageing-timer

Attribute Type: uint32

Default Value: 300

Attribute Range: 10-1000000

Netconf edit-config payload

<mac-ageing-timer>10</mac-ageing-timer>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan mac-ageing-time <10-1000000>

Configure arp nd refresh timer

Use this attribute to configure aging out the arp-cache and nd-cache entries for given time multiplied by 3 in secs.

Attribute Name: arp-nd-refresh-timer

Attribute Type: uint32

Attribute Range: 3-21600

Netconf edit-config payload

<arp-nd-refresh-timer>3</arp-nd-refresh-timer>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan arp-nd refresh-timer <3-21600>

Configure maximum cache disable count

Use this command to configure the maximum number of ARP and ND cache disables on access ports configured with the port+VLAN options. This command does not limit the ARP and ND cache disables on access ports created with only the port option.

Attribute Name: maximum-cache-disable-count

Attribute Type: uint16

Attribute Range: 1-2500

Netconf edit-config payload

<maximum-cache-disable-count>1</maximum-cache-disable-count>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan max-cache-disable <1-2500>

Configure mh mac relocate scan

Use this attribute to set the vxlan mh mac relocate scan

Attribute Name: mh-mac-relocate-scan

Attribute Type: enum (enable|disable)

Netconf edit-config payload

<mh-mac-relocate-scan>enable</mh-mac-relocate-scan>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan mh-mac-relocate-scan (enable|disable)

Configure disable arp storm control for cpu

Use this attribute to set the vxlan disable arp storm control for cpu

Attribute Name: disable-arp-storm-control-for-cpu

Attribute Type: empty

Netconf edit-config payload

</disable-arp-storm-control-for-cpu>

</config>

</global>

</vxlan>

Command Syntax

nvo vxlan disable-arp-storm-control-for-cpu

Configure traffic direction

Use this attribute to set global direction(ingress/egress) for VxLAN. Ingreess means traffic coming to network side and egress means traffic going out from network side

This command is supported when following feature are enabled QOS feature

Attribute Name: traffic-direction

Attribute Type: enum (ingress|egress)

Attribute Name: profile-name

Attribute Type: string

Netconf edit-config payload

<qos-tunnel-mappings>

<qos-tunnel-mapping>

<traffic-direction>ingress</traffic-direction>

<traffic-direction>ingress</traffic-direction>

<qos-map-mode>cos-dscp</qos-map-mode>

<profile-name>NAME</profile-name>

</config>

<qos-map-mode>cos-dscp</qos-map-mode>

</qos-tunnel-mapping>

</qos-tunnel-mappings>

</vxlan>

Command Syntax

nvo vxlan tunnel qos-map-mode (cos-dscp) (ingress|egress) NAME

Configure tenant type

Use this attribute to create tenant with multicast tunnel

Attribute Name: tenant-type

Attribute Type: enum (default|multicast|ingress-replication|ingress-replication inner-vid-disabled)

Attribute Name: etree-leaf

Attribute Type: uint8

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</etree-leaf>

</config>

<tenant-type>default</tenant-type>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

Configure bridge vlan id

Use this attribute to create tenant with ingress-replication bridge-vlan tunnel

Attribute Name: bridge-vlan-id

Attribute Type: uint16

Attribute Range: 1-4094

Attribute Name: tenant-type-bridge

Attribute Type: enum (default|multicast|ingress-replication)

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

<tenant-type-bridge>default</tenant-type-bridge>

</config>

<bridge-vlan-id>1</bridge-vlan-id>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

nvo vxlan id <1-16777215> (default|multicast|ingress-replication) (bridge-vlan <1-4094>|)

Configure vrf name

Use this attribute to map VRF to carry EVPN routes. This defines BGP as the mechanism for host reachability advertisement.

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<vrf-name>NAME</vrf-name>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

vxlan host-reachability-protocol evpn-bgp NAME

Configure map network

Use this attribute to map a tunnel to the tenant

Attribute Name: map-network

Attribute Type: string

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<map-network>NAME</map-network>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

vxlan map-network tunnel NAME

Configure mac hold timer

Use this attribute to set the time a host mac entry will persist after unconfiguring. Hold time range -1 to 300 in seconds. -1(never expire)

Attribute Name: mac-hold-timer

Attribute Type: int32

Default Value: 0

Attribute Range: -1-300

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<mac-hold-timer>-1</mac-hold-timer>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

mac-holdtime <-1-300>

Configure tenant description

Use this attribute to set VxLAN identifier name

Attribute Name: tenant-description

Attribute Type: string

Attribute Range: 1-10

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<tenant-description>WORD</tenant-description>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

vni-name WORD

Configure irb name

Use this attribute to to configure default gateway behavior on a VTEP for particular VNID.

Attribute Name: irb-name

Attribute Type: string

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<irb-name>NAME</irb-name>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

evpn NAME

Configure disable l3 termination

Use this attribute to set the disable l3 terminaation

Attribute Name: disable-l3-termination

Attribute Type: string

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<disable-l3-termination>XXXX.XXXX.XXXX</disable-l3-termination>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

disable-l3-termination XXXX.XXXX.XXXX

Configure evi learning limit

Attach (EVPN-VxLAN) EVI MAC learning limit profile

Attribute Name: evi-learning-limit

Attribute Type: string

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<evi-learning-limit>PROFILENAME</evi-learning-limit>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

learning limit PROFILENAME

Configure irb advertise host route

Use this attribute to set advertise host to route

Attribute Name: irb-advertise-host-route

Attribute Type: empty

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<irb>

</irb-advertise-host-route>

</config>

</irb>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

evpn irb-advertise-host-route

Configure vxlan identifier

Use this attribute to know MAC address of the host.create a static route to reach a destination MAC in the VXLAN forwarding table. This command helps to supports different tenants so that they can have the same MAC/IP, but different VNIDs.This command is required for unicast tunnels to map the remote VTEP

Attribute Name: mac-address

Attribute Type: string

Attribute Name: remote-vtep-ipv4

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vxlan-tenants>

<vxlan-tenant>

<vxlan-identifier>1</vxlan-identifier>

<vxlan-identifier>1</vxlan-identifier>

</config>

<static-tenants>

<static-tenant>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

<mac-address>CML_MAC_ADDR_T</mac-address>

<remote-vtep-ipv4>A.B.C.D</remote-vtep-ipv4>

</config>

</static-tenant>

</static-tenants>

</vxlan-tenant>

</vxlan-tenants>

</vxlan>

Command Syntax

vxlan static-entry host-mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) remote-vtep-ip A.B.C.D

Configure untagged interface name

Use this attribute to map a physical interface to identify the tenant traffic and to enter NVO access interface mode

This command is supported when following feature are disabled DNX feature

Attribute Name: untagged-interface-name

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

nvo vxlan access-if port IFNAME

Configure default access interface

Use this attribute to create default access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: default-access-interface

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</default-access-interface>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

nvo vxlan access-if port IFNAME default

Configure admin shutdown

Use this attribute to shutdown vxlan access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: admin-shutdown

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</admin-shutdown>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

shutdown

Configure description

Use this attribute to set description of access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: description

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

description LINE

Configure dynamic learning disable

Use this attribute to disable dynamic learning of MACs at the access port. This command also disables dynamic learning of MAC/IP from ARP/ND messages received on this access port.

This command is supported when following feature are disabled DNX feature

Attribute Name: dynamic-learning-disable

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</dynamic-learning-disable>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

dynamic-learning disable

Configure access mac hold time

Use this attribute to set the time a host mac entry will persist after unconfiguring. The feature holds the MAC in hardware until BGP has withdrawn from the neighbors. This helps to reduce flooding to other access ports. This setting applies when the access port is shut down, the physical port on which the access port is down, or the access port is removed from the VNID using the no form of the map vnid command. When the MAC hold time is configured as -1, then the MAC is not removed from the hardware and is also not withdrawn from EVPN BGP

This command is supported when following feature are disabled DNX feature

Attribute Name: access-mac-hold-time

Attribute Type: int32

Attribute Range: -1-300

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<access-mac-hold-time>-1</access-mac-hold-time>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

mac-holdtime <-1-300>

Configure arp nd flood suppress

Use this attribute to restrict the flood of ARP/ND packets towards remote VTEPs or other access ports.This command applies only when the ARP cache and ND cache are enabled. When the ARP cache is disabled, ARP flooding is not suppressed even if this command is given. When the ND cache is disabled, ND flooding is not disabled, even if this command is given

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-nd-flood-suppress

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</arp-nd-flood-suppress>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

arp-nd flood-suppress

Configure garp gna enable

Use this attribute to allow garp-gna packets advertisement

This command is supported when following feature are disabled DNX feature

Attribute Name: garp-gna-enable

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

</garp-gna-enable>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

garp-gna enable

Configure untagged-access-interface mac-address

Use this attribute to set the static mac address of host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX)

Configure ac learning limit

Attach MAC learning limit profile to VxLAN AC port

This command is supported when following feature are disabled DNX feature

Attribute Name: ac-learning-limit

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<ac-learning-limit>PROFILENAME</ac-learning-limit>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

learning limit PROFILENAME

Configure arp cache disable

Use this attribute to disable the ARP cache for MAC/IP. When the ARP cache is disabled on a VxLAN access port, ZebOS-XP does not reply to any ARP arriving on this port from the cache. ZebOS-XP withdraws all MAC/IPs configured/learned on this access port and removes the MAC/IP entry for this access port from the local ARP cache. ZebOS-XP also makes sure that on withdrawing the MAC/IP route, the MAC does not become unknown. If all routes for this MAC are being withdrawn because of this command, then ZebOS-XP advertises a MAC-only route. This is done so that the MAC does not become unknown and only the cache functionality becomes disabled.See also nvo vxlan max-cache-disable. Use the no form of this command to enable ARP cache for MAC/IP. Note: On enabling the cache, an IP will be in conflict, then the cache enable will fail. The conflict has to be manually removed and then the cache enabled.

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-cache-disable

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<cache>

</arp-cache-disable>

</config>

</cache>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

arp-cache disable

Configure nd cache disable

Use this attribute to disable ND cache for MAC/IPv6. When the ARP cache is disabled on a VxLAN access port, ZebOS-XP does not reply to any ARP arriving on this port from the cache. ZebOS-XP withdraws all MAC/IPs configured/learned on this access port and removes the MAC/IP entry for this access port from the local ARP cache. ZebOS-XP also makes sure that on withdrawing the MAC/IP route, the MAC does not become unknown. If all routes for this MAC are being withdrawn because of this command, then ZebOS-XP advertises a MAC-only route. This is done so that the MAC does not become unknown and only the cache functionality becomes disabled. Use the no form of this command to enable ND cache for MAC/IPv6. Note: On enabling the cache, an IP will be in conflict, then the cache enable will fail. The conflict has to be manually removed and then the cache enabled.

This command is supported when following feature are disabled DNX feature

Attribute Name: nd-cache-disable

Attribute Type: empty

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<cache>

</nd-cache-disable>

</config>

</cache>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

nd-cache disable

Configure map vxlan-identifier

Use this attribute to map a tenant to an access-port

This command is supported when following feature are disabled DNX feature

Attribute Name: vxlan-identifier

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<map>

<vxlan-identifier>1</vxlan-identifier>

</config>

</map>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

map vnid <1-16777215>

Configure map tenant-description

Use this attribute to map VXLAN Identifier Name

This command is supported when following feature are disabled DNX feature

Attribute Name: tenant-description

Attribute Type: string

Attribute Range: 1-10

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<map>

<tenant-description>WORD</tenant-description>

</config>

</map>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

map vni-name WORD

Configure ipv4 address

Use this attribute to know MAC address of the host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<host-macs-ipv4>

<host-mac-ipv4>

<ipv4-address>A.B.C.D</ipv4-address>

<ipv4-address>A.B.C.D</ipv4-address>

<mac-address>CML_MAC_ADDR_T</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv4>

</host-macs-ipv4>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ip IP-ADDRESS

Configure ipv6 address

Use this attribute to know MAC address of the host

This command is supported when following feature are enabled IPV6 feature and following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<host-macs-ipv6>

<host-mac-ipv6>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>IP-ADDRESS</ipv6-address>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv6>

</host-macs-ipv6>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ipv6 IP-ADDRESS

Configure profile map type

Use this attribute to map the profile type for which qos profile is already created globally to access port

This command is supported when following feature are enabled QOS feature and following feature are disabled DNX feature

Attribute Name: profile-map-type

Attribute Type: enum (cos-to-queue|queue-color-to-cos)

Attribute Name: profile-name

Attribute Type: string

Netconf edit-config payload

<untagged-access-interfaces>

<untagged-access-interface>

<untagged-interface-name>WORD</untagged-interface-name>

<untagged-interface-name>WORD</untagged-interface-name>

</config>

<access-interface-qos-type-mappings>

<access-interface-qos-type-mapping>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-name>NAME</profile-name>

</config>

</access-interface-qos-type-mapping>

</access-interface-qos-type-mappings>

</untagged-access-interface>

</untagged-access-interfaces>

</vxlan>

Command Syntax

map qos-profile (cos-to-queue|queue-color-to-cos) NAME

Configure vlan identifier

Use this attriute to map a VLAN on physical interface to identify the tenant traffic and to enter NVO access interface mode

This command is supported when following feature are disabled DNX feature

Attribute Name: vlan-identifier

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

nvo vxlan access-if port-vlan IFNAME VLAN_RANGE

Configure tag protocol identifier

Use this attribute to set the Tpid for the outer vlan. Ox88A8: IEEE 802.1ad Provider Bridging and Ox9100: IEEE 802.1Q VLAN-tagged frame with double tagging

This command is supported when following feature are disabled DNX feature

Attribute Name: tag-protocol-identifier

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<tag-protocol-identifier>TPID</tag-protocol-identifier>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

encapsulation TPID

Configure interface name

Use this attribute to shutdown vxlan access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: admin-shutdown

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</admin-shutdown>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

shutdown

Configure tagged-access-interface description

Use this attribute to set description of access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: description

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

description LINE

Configure tagged-access-interface dynamic-learning-disable

Use this attribute to disable dynamic learning of MACs at the access port. This command also disables dynamic learning of MAC/IP from ARP/ND messages received on this access port.

This command is supported when following feature are disabled DNX feature

Attribute Name: dynamic-learning-disable

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</dynamic-learning-disable>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

dynamic-learning disable

Configure tagged-access-interface access-mac-hold-time

This command is supported when following feature are disabled DNX feature

Attribute Name: access-mac-hold-time

Attribute Type: int32

Attribute Range: -1-300

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<access-mac-hold-time>-1</access-mac-hold-time>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

mac-holdtime <-1-300>

Configure tagged-access-interface arp-nd-flood-suppress

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-nd-flood-suppress

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</arp-nd-flood-suppress>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

arp-nd flood-suppress

Configure tagged-access-interface garp-gna-enable

Use this attribute to allow garp-gna packets advertisement

This command is supported when following feature are disabled DNX feature

Attribute Name: garp-gna-enable

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

</garp-gna-enable>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

garp-gna enable

Configure tagged-access-interface mac-address

Use this attribute to set the static mac address of host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX)

Configure tagged-access-interface ac-learning-limit

Attach MAC learning limit profile to VxLAN AC port

This command is supported when following feature are disabled DNX feature

Attribute Name: ac-learning-limit

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<ac-learning-limit>PROFILENAME</ac-learning-limit>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

learning limit PROFILENAME

Configure cache arp-cache-disable

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-cache-disable

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<cache>

</arp-cache-disable>

</config>

</cache>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

arp-cache disable

Configure cache nd-cache-disable

This command is supported when following feature are disabled DNX feature

Attribute Name: nd-cache-disable

Attribute Type: empty

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<cache>

</nd-cache-disable>

</config>

</cache>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

nd-cache disable

Configure map vxlan-identifier

Use this attribute to map a tenant to an access-port

This command is supported when following feature are disabled DNX feature

Attribute Name: vxlan-identifier

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<map>

<vxlan-identifier>1</vxlan-identifier>

</config>

</map>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

map vnid <1-16777215>

Configure map tenant-description

Use this attribute to map VXLAN Identifier Name

This command is supported when following feature are disabled DNX feature

Attribute Name: tenant-description

Attribute Type: string

Attribute Range: 1-10

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<map>

<tenant-description>WORD</tenant-description>

</config>

</map>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

map vni-name WORD

Configure host-macs-ipv4 mac-address

Use this attribute to know MAC address of the host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<host-macs-ipv4>

<host-mac-ipv4>

<ipv4-address>A.B.C.D</ipv4-address>

<ipv4-address>A.B.C.D</ipv4-address>

<mac-address>CML_MAC_ADDR_T</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv4>

</host-macs-ipv4>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ip IP-ADDRESS

Configure host-macs-ipv6 mac-address

Use this attribute to know MAC address of the host

This command is supported when following feature are enabled IPV6 feature and following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<host-macs-ipv6>

<host-mac-ipv6>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>IP-ADDRESS</ipv6-address>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv6>

</host-macs-ipv6>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ipv6 IP-ADDRESS

Configure profile name

Use this attribute to map the profile type for which qos profile is already created globally to access port

This command is supported when following feature are enabled QOS feature and following feature are disabled DNX feature

Attribute Name: profile-map-type

Attribute Type: enum (cos-to-queue|queue-color-to-cos)

Attribute Name: profile-name

Attribute Type: string

Netconf edit-config payload

<tagged-access-interfaces>

<tagged-access-interface>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<interface-name>WORD</interface-name>

<access-interface-qos-type-mappings>

<access-interface-qos-type-mapping>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-name>NAME</profile-name>

</config>

</access-interface-qos-type-mapping>

</access-interface-qos-type-mappings>

</tagged-access-interface>

</tagged-access-interfaces>

</vxlan>

Command Syntax

map qos-profile (cos-to-queue|queue-color-to-cos) NAME

Configure inner vlan identifier

Use this attriute to map VLAN’S on an interface to identify the tenant traffic and to enter NVO access interface mode

This command is supported when following feature are disabled DNX feature

Attribute Name: inner-vlan-identifier

Attribute Type: uint32

Attribute Range: 2-4094

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

nvo vxlan access-if port-vlan IFNAME VLAN_RANGE inner-vlan <2-4094>

Configure double-tagged-access-interface tag-protocol-identifier

Use this attribute to set the Tpid for the outer vlan. Ox88A8: IEEE 802.1ad Provider Bridging and Ox9100: IEEE 802.1Q VLAN-tagged frame with double tagging

This command is supported when following feature are disabled DNX feature

Attribute Name: tag-protocol-identifier

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<tag-protocol-identifier>TPID</tag-protocol-identifier>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

encapsulation TPID

Configure double-tagged-access-interface admin-shutdown

Use this attribute to shutdown vxlan access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: admin-shutdown

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</admin-shutdown>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

shutdown

Configure double-tagged-access-interface description

Use this attribute to set description of access interface

This command is supported when following feature are disabled DNX feature

Attribute Name: description

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

description LINE

Configure double-tagged-access-interface dynamic-learning-disable

Use this attribute to disable dynamic learning of MACs at the access port. This command also disables dynamic learning of MAC/IP from ARP/ND messages received on this access port.

This command is supported when following feature are disabled DNX feature

Attribute Name: dynamic-learning-disable

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</dynamic-learning-disable>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

dynamic-learning disable

Configure double-tagged-access-interface access-mac-hold-time

This command is supported when following feature are disabled DNX feature

Attribute Name: access-mac-hold-time

Attribute Type: int32

Attribute Range: -1-300

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<access-mac-hold-time>-1</access-mac-hold-time>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

mac-holdtime <-1-300>

Configure double-tagged-access-interface arp-nd-flood-suppress

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-nd-flood-suppress

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</arp-nd-flood-suppress>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

arp-nd flood-suppress

Configure double-tagged-access-interface garp-gna-enable

Use this attribute to allow garp-gna packets advertisement

This command is supported when following feature are disabled DNX feature

Attribute Name: garp-gna-enable

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</garp-gna-enable>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

garp-gna enable

Configure double-tagged-access-interface mac-address

Use this attribute to set the static mac address of host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX)

Configure double-tagged-access-interface ac-learning-limit

Attach MAC learning limit profile to VxLAN AC port

This command is supported when following feature are disabled DNX feature

Attribute Name: ac-learning-limit

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<ac-learning-limit>PROFILENAME</ac-learning-limit>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

learning limit PROFILENAME

Configure map vxlan-identifier

Use this attribute to map a tenant to an access-port

This command is supported when following feature are disabled DNX feature

Attribute Name: vxlan-identifier

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<map>

<vxlan-identifier>1</vxlan-identifier>

</config>

</map>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

map vnid <1-16777215>

Configure map tenant-description

Use this attribute to map VXLAN Identifier Name

This command is supported when following feature are disabled DNX feature

Attribute Name: tenant-description

Attribute Type: string

Attribute Range: 1-10

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<map>

<tenant-description>WORD</tenant-description>

</config>

</map>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

map vni-name WORD

Configure cache arp-cache-disable

This command is supported when following feature are disabled DNX feature

Attribute Name: arp-cache-disable

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<cache>

</arp-cache-disable>

</config>

</cache>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

arp-cache disable

Configure cache nd-cache-disable

This command is supported when following feature are disabled DNX feature

Attribute Name: nd-cache-disable

Attribute Type: empty

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<cache>

</nd-cache-disable>

</config>

</cache>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

nd-cache disable

Configure host-macs-ipv4 mac-address

Use this attribute to know MAC address of the host

This command is supported when following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<host-macs-ipv4>

<host-mac-ipv4>

<ipv4-address>A.B.C.D</ipv4-address>

<ipv4-address>A.B.C.D</ipv4-address>

<mac-address>CML_MAC_ADDR_T</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv4>

</host-macs-ipv4>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ip IP-ADDRESS

Configure host-macs-ipv6 mac-address

Use this attribute to know MAC address of the host

This command is supported when following feature are enabled IPV6 feature and following feature are disabled DNX feature

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<host-macs-ipv6>

<host-mac-ipv6>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>IP-ADDRESS</ipv6-address>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</config>

<mac-address>CML_MAC_ADDR_T</mac-address>

</host-mac-ipv6>

</host-macs-ipv6>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) ipv6 IP-ADDRESS

Configure access-interface-qos-type-mappings profile-map-type

Use this attribute to map the profile type for which qos profile is already created globally to access port

This command is supported when following feature are enabled QOS feature and following feature are disabled DNX feature

Attribute Name: profile-map-type

Attribute Type: enum (cos-to-queue|queue-color-to-cos)

Attribute Name: profile-name

Attribute Type: string

Netconf edit-config payload

<double-tagged-access-interfaces>

<double-tagged-access-interface>

<inner-vlan-identifier>2</inner-vlan-identifier>

<inner-vlan-identifier>2</inner-vlan-identifier>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

</config>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

<interface-name>WORD</interface-name>

<access-interface-qos-type-mappings>

<access-interface-qos-type-mapping>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-map-type>cos-to-queue</profile-map-type>

<profile-name>NAME</profile-name>

</config>

</access-interface-qos-type-mapping>

</access-interface-qos-type-mappings>

</double-tagged-access-interface>

</double-tagged-access-interfaces>

</vxlan>

Command Syntax

map qos-profile (cos-to-queue|queue-color-to-cos) NAME

Configure access if

VXLAN logical access port per physical interface

Attribute Name: access-if

Attribute Type: empty

Netconf edit-config payload

</config>

</access-if>

</interface>

</interfaces>

</vxlan>

Command Syntax

access-if-vxlan

Configure evpn mac holdtime

Use this attribute to set the evpn mac hold time

Attribute Name: evpn-mac-holdtime

Attribute Type: uint32

Attribute Range: 1-600

Netconf edit-config payload

</config>

<evpn-mac-holdtime>1</evpn-mac-holdtime>

</interface>

</interfaces>

</vxlan>

Command Syntax

evpn-mac-holdtime <1-600>

Configure arp cache

Use this attribute to set the ARP cache in interface

Attribute Name: arp-cache

Attribute Type: empty

Netconf edit-config payload

</config>

</arp-cache>

</interface>

</interfaces>

</vxlan>

Command Syntax

arp-cache disable

Configure nd cache

Use this attribute to set the ND cache in interface

Attribute Name: nd-cache

Attribute Type: empty

Netconf edit-config payload

</config>

</nd-cache>

</interface>

</interfaces>

</vxlan>

Command Syntax

nd-cache disable

clear mac address-table dynamic vxlan

Netconf RPC payload

<clear-nvo-vxlan-dynamic-mac-address-table xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan"/>

Command Syntax

clear mac address-table dynamic vxlan

clear mac address-table dynamic vxlan vnid <1-16777215> (address MACADDR|)

Attribute Name: vxlan-identifier

Attribute Type: uint32

Attribute Range: 1-16777215

Attribute Name: mac-address

Attribute Type: string

Netconf RPC payload

<clear-nvo-vxlan-dynamic-mac-address-table-vnid xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<vxlan-identifier>1</vxlan-identifier>

<mac-address>MACADDR</mac-address>

</clear-nvo-vxlan-dynamic-mac-address-table-vnid>

Command Syntax

clear mac address-table dynamic vxlan vnid <1-16777215> (address MACADDR|)

clear nvo vxlan tunnels

Netconf RPC payload

<clear-nvo-vxlan-tunnels xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan"/>

Command Syntax

clear nvo vxlan tunnels

clear nvo vxlan tunnels dst-ip A.B.C.D

Attribute Name: destination-vtep-ip

Attribute Type: inet:ipv4-address

Netconf RPC payload

<clear-nvo-id-vxlan-tunnels-destip xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<destination-vtep-ip>A.B.C.D</destination-vtep-ip>

</clear-nvo-id-vxlan-tunnels-destip>

Command Syntax

clear nvo vxlan tunnels dst-ip A.B.C.D

clear nvo vxlan mac-stale-entries (vnid <1-16777215>|)

Attribute Name: vxlan-identifier

Attribute Type: uint32

Attribute Range: 1-16777215

Netconf RPC payload

<clear-nvo-vxlan-mac-stale-entries xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<vxlan-identifier>1</vxlan-identifier>

</clear-nvo-vxlan-mac-stale-entries>

Command Syntax

clear nvo vxlan mac-stale-entries (vnid <1-16777215>|)

clear nvo vxlan counters access-port port IFNAME

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<clear-vxlan-untagged-access-port-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<interface-name>IFNAME</interface-name>

</clear-vxlan-untagged-access-port-counters>

Command Syntax

clear nvo vxlan counters access-port port IFNAME

clear nvo vxlan counters access-port port-vlan IFNAME VLAN_RANGE

Attribute Name: interface-name

Attribute Type: string

Attribute Name: vlan-identifier

Attribute Type: string

Netconf RPC payload

<clear-vxlan-single-tagged-access-port-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<interface-name>IFNAME</interface-name>

<vlan-identifier>VLAN_RANGE</vlan-identifier>

</clear-vxlan-single-tagged-access-port-counters>

Command Syntax

clear nvo vxlan counters access-port port-vlan IFNAME VLAN_RANGE

clear nvo vxlan counters access-port port-vlan IFNAME outer-vlan <2-4094> inner-vlan <2-4094>

Attribute Name: interface-name

Attribute Type: string

Attribute Name: outer-vlan-identifier

Attribute Type: uint32

Attribute Range: 2-4094

Attribute Name: inner-vlan-identifier

Attribute Type: uint32

Attribute Range: 2-4094

Netconf RPC payload

<clear-vxlan-double-tagged-access-port-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<interface-name>IFNAME</interface-name>

<outer-vlan-identifier>outer-vlan</outer-vlan-identifier>

<inner-vlan-identifier>inner-vlan</inner-vlan-identifier>

</clear-vxlan-double-tagged-access-port-counters>

Command Syntax

clear nvo vxlan counters access-port port-vlan IFNAME outer-vlan <2-4094> inner-vlan <2-4094>

clear nvo vxlan counters access-port all

Netconf RPC payload

<clear-vxlan-access-port-counters-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan"/>

Command Syntax

clear nvo vxlan counters access-port all

clear nvo vxlan counters network-port dst A.B.C.D

Attribute Name: destination-vtep-ip

Attribute Type: inet:ipv4-address

Netconf RPC payload

<clear-vxlan-network-port-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan">

<destination-vtep-ip>A.B.C.D</destination-vtep-ip>

</clear-vxlan-network-port-counters>

Command Syntax

clear nvo vxlan counters network-port dst A.B.C.D

clear nvo vxlan counters network-port all

Netconf RPC payload

<clear-vxlan-network-port-counters-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-vxlan"/>

Command Syntax

clear nvo vxlan counters network-port all

IPI-ETHERNET-VPN

Configure esi hold time

Use this attribute to set time before ESI can be made up on enabling evpn

Attribute Name: esi-hold-time

Attribute Type: uint32

Attribute Range: 10-300

Netconf edit-config payload

<multi-homing>

<esi-hold-time>10</esi-hold-time>

</config>

</multi-homing>

</evpn>

Command Syntax

evpn esi hold-time <10-300>

Configure enable vxlan multihoming

Use this attribute to enable multihoming module on vxlan. Without this attribute multihomig functionality can not be achieved

Attribute Name: enable-vxlan-multihoming

Attribute Type: uint8

Netconf edit-config payload

</enable-vxlan-multihoming>

</config>

</global>

</evpn>

Command Syntax

evpn multihoming enable

Configure global enable-vxlan-multihoming

Use this attribute to enable multihoming module on vxlan. Without this attribute multihomig functionality can not be achieved

Attribute Name: enable-vxlan-multihoming

Attribute Type: empty

Netconf edit-config payload

</enable-vxlan-multihoming>

</config>

</global>

</evpn>

Command Syntax

evpn vxlan multihoming enable

Configure enable irb

Use this attribute to enable integrated routing and bridging module. Without this attribute IRB functionality can not be achieved

Attribute Name: enable-irb

Attribute Type: empty

Netconf edit-config payload

</enable-irb>

</config>

</global>

</evpn>

Command Syntax

nvo vxlan irb

Configure enable evpn etree

Use this attribute to enable evpn etree module on evpn mpls or vxlan.

Attribute Name: enable-evpn-etree

Attribute Type: empty

Netconf edit-config payload

</enable-evpn-etree>

</config>

</global>

</evpn>

Command Syntax

evpn etree enable

Configure mac address

Use this attribute to configure common anycast mac-address for all IRB interfaces

Attribute Name: mac-address

Attribute Type: string

Netconf edit-config payload

<irb-forwarding>

<mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</mac-address>

</config>

</irb-forwarding>

</evpn>

Command Syntax

evpn irb-forwarding anycast-gateway-mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX)

Configure gateway mac

Use this attribute to configure anycast mac-address for an IRB interface

Attribute Name: gateway-mac

Attribute Type: empty

Netconf edit-config payload

<irb-forwarding>

<irb-interfaces>

<irb-interface>

</config>

</gateway-mac>

</irb-interface>

</irb-interfaces>

</irb-forwarding>

</evpn>

Command Syntax

evpn irb-if-forwarding anycast-gateway-mac

Configure redundancy mode

Use this attribute to configure load balancing type

Attribute Name: redundancy-mode

Attribute Type: enum (single-active|port-active)

Attribute Name: evpn-segment-id

Attribute Type: string

Netconf edit-config payload

<evpn-segment-id>XX:XX:XX:XX:XX:XX:XX:XX:XX</evpn-segment-id>

</config>

<redundancy-mode>single-active</redundancy-mode>

</interface>

</interfaces>

</evpn>

Command Syntax

evpn multi-homed esi XX:XX:XX:XX:XX:XX:XX:XX:XX (load-balancing (single-active|port-active)|)

Configure name

Use this attribute to configure load balancing type

Attribute Name: redundancy-mode

Attribute Type: enum (single-active|port-active)

Attribute Name: system-mac

Attribute Type: string

Netconf edit-config payload

<system-mac>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</system-mac>

</config>

<redundancy-mode>single-active</redundancy-mode>

</interface>

</interfaces>

</evpn>

Command Syntax

evpn multi-homed system-mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (load-balancing (single-active|port-active)|)

Configure service type

Use this attribute to configure Vlan-Based EVPN-Service Type

Attribute Name: service-type

Attribute Type: enum (vlan-based|vlan-aware-bundle)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<service-type>vlan-based</service-type>

</vrf>

</vrfs>

</evpn>

Command Syntax

evpn-vlan-service (vlan-based|vlan-aware-bundle)

IPI-TFO

Configure admin status

Use this attribute to enable or disable trigger failover (TFO).TFO can be enabled only if the bridge mode is STP or RSTP.

Attribute Name: admin-status

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<trigger-failover xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<admin-status>disable</admin-status>

</config>

</trigger-failover>

Command Syntax

tfo (disable|enable)

Configure link type

Use this attribute to make a port an uplink or downlink.

Attribute Name: link-type

Attribute Type: enum (uplink|downlink)

Netconf edit-config payload

<trigger-failover xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<name>IFNAME</name>

</config>

</interface>

</interfaces>

</trigger-failover>

Command Syntax

link-type (uplink|downlink)

Configure fog id

Use this attribute to Create or delete a failover group (FOG) on interface.

Attribute Name: fog-id

Attribute Type: uint32

Attribute Range: 1-64

Attribute Name: group-type

Attribute Type: enum (mpg|cpg)

Netconf edit-config payload

<trigger-failover xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<name>IFNAME</name>

</config>

<tfo-groups>

<tfo-group>

<fog-id>1</fog-id>

<fog-id>1</fog-id>

<group-type>mpg</group-type>

</config>

</tfo-group>

</tfo-groups>

</interface>

</interfaces>

</trigger-failover>

Command Syntax

fog <1-64> type (mpg|cpg)

Configure group id

Use this attribute to Create or delete a failover group (FOG).

Attribute Name: group-id

Attribute Type: uint32

Attribute Range: 1-64

Attribute Name: admin-status

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<trigger-failover xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<failover-groups>

<failover-group>

<group-id>1</group-id>

<group-id>1</group-id>

<admin-status>disable</admin-status>

</config>

</failover-group>

</failover-groups>

</trigger-failover>

Command Syntax

fog <1-64> (disable|enable)

Configure failover trigger count

Use this attribute to set the number of links to trigger failover for a Monitor Port Groups (MPG).

Attribute Name: failover-trigger-count

Attribute Type: uint32

Attribute Range: 0-63

Netconf edit-config payload

<trigger-failover xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<failover-groups>

<failover-group>

<group-id>1</group-id>

<group-id>1</group-id>

</config>

<failover-trigger-count>0</failover-trigger-count>

</failover-group>

</failover-groups>

</trigger-failover>

Command Syntax

fog <1-64> tfc <0-63>

clear tfo counter

Netconf RPC payload

<tfo-clear-counters-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo"/>

Command Syntax

clear tfo counter

clear tfo counter fog <1-64>

Attribute Name: group-id

Attribute Type: uint32

Attribute Range: 1-64

Netconf RPC payload

<tfo-clear-fog-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-tfo">

<group-id>1</group-id>

</tfo-clear-fog-counters>

Command Syntax

clear tfo counter fog <1-64>

IPI-LOGGING

Configure severity level

Use this attribute to set the severity level that a message for a specific module must reach before the messages is logged. Default value is 2-critical.

Attribute Name: severity-level

Attribute Type: enum (0|1|2|3|4|5|6|7)

Netconf edit-config payload

<logging-modules>

<module-logging>

<module-name>auth</module-name>

<module-name>auth</module-name>

</config>

<severity-level>2</severity-level>

</module-logging>

</logging-modules>

</logging>

Command Syntax

logging level (auth|bgp|cmm|hostp|hsl|isis|lag|l2mrib|mstp|mrib|nsm|onm|oam|ospf|ospf6|rip|pim|rib|vrrp|sflow|pserv|cml|ndd|ripng|vlog|all|udld) ((0|1|2|3|4|5|6|7)|)

Configure enable logging

Use this attribute to set severity level of logging monitor. Default value is 7-debug-details.

Attribute Name: severity-level

Attribute Type: enum (0|1|2|3|4|5|6|7)

Default Value: 7

Attribute Name: enable-logging

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<monitor-logging>

<enable-logging>enable</enable-logging>

<severity-level>7</severity-level>

</config>

</monitor-logging>

</logging>

Command Syntax

logging monitor ((disable)|) ((0|1|2|3|4|5|6|7)|)

Configure console-logging severity-level

Use this attribute to set severity level of logging console. Default value is 2-critical.

Attribute Name: severity-level

Attribute Type: enum (0|1|2|3|4|5|6|7)

Default Value: 2

Attribute Name: enable-logging

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<console-logging>

<enable-logging>enable</enable-logging>

<severity-level>2</severity-level>

</config>

</console-logging>

</logging>

Command Syntax

logging console ((disable)|) ((0|1|2|3|4|5|6|7)|)

Configure max file size

Set size of the log file in bytes. Default value is 419430400 bytes.

Attribute Name: max-file-size

Attribute Type: uint32

Attribute Range: 4096-419430400

Attribute Name: file-name

Attribute Type: string

Attribute Name: severity-level

Attribute Type: enum (0|1|2|3|4|5|6|7)

Netconf edit-config payload

<file-name>LOGFILENAME</file-name>

<severity-level>6</severity-level>

<max-file-size>4096</max-file-size>

</config>

</logfile>

</logging>

Command Syntax

logging logfile LOGFILENAME (0|1|2|3|4|5|6|7) size <4096-419430400>

Configure file name

Use this attribute to set name of the logging file.

Attribute Name: file-name

Attribute Type: string

Attribute Name: severity-level

Attribute Type: enum (0|1|2|3|4|5|6|7)

Netconf edit-config payload

<severity-level>6</severity-level>

<file-name>LOGFILENAME</file-name>

</config>

</logfile>

</logging>

Command Syntax

logging logfile LOGFILENAME (0|1|2|3|4|5|6|7)

Configure debug-logfile max-file-size

Set size of the debug log file in bytes. The default value is 4194304 bytes.

Attribute Name: max-file-size

Attribute Type: uint32

Attribute Range: 4096-4194304

Attribute Name: file-name

Attribute Type: string

Netconf edit-config payload

<debug-logfile>

<file-name>LOGFILE</file-name>

<max-file-size>4096</max-file-size>

</config>

</debug-logfile>

</logging>

Command Syntax

debug logfile LOGFILE size <4096-4194304>

Configure timestamp granularity

Use this attribute to set the logging timestamp granularity.

This command is supported when following feature are enabled syslog feature

Attribute Name: timestamp-granularity

Attribute Type: enum (none|microseconds|milliseconds|seconds)

Default Value: milliseconds

Netconf edit-config payload

<timestamp-granularity>milliseconds</timestamp-granularity>

</config>

</syslog>

</logging>

Command Syntax

logging timestamp (none|microseconds|milliseconds|seconds|)

Configure cli timestamp

Use this attribute to display execution timestamp in show output

This command is supported when following feature are enabled syslog feature

Attribute Name: cli-timestamp

Attribute Type: empty

Netconf edit-config payload

</cli-timestamp>

</config>

</syslog>

</logging>

Command Syntax

cli timestamp

Configure disable all modules debug

Use this attribute to unset debug globally

Attribute Name: disable-all-modules-debug

Attribute Type: empty

Netconf edit-config payload

</disable-all-modules-debug>

</config>

</global>

</logging>

Command Syntax

no debug all

Netconf RPC payload

<terminal-debug-all-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging"/>

Command Syntax

no debug all

clear debug logfile

Netconf RPC payload

<logging-clear-debug-logfile xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging"/>

Command Syntax

clear debug logfile

clear logging logfile

Netconf RPC payload

<logging-clear-logging-logfile xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging"/>

Command Syntax

clear logging logfile

remove file (techsupport) (all|FILENAME)

Attribute Name: file_type

Attribute Type: enum (techsupport)

Attribute Name: filename

Attribute Type: union

Netconf RPC payload

<remove-file xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging">

<file_type>techsupport</file_type>

</remove-file>

Command Syntax

remove file (techsupport) (all|FILENAME)

IPI-LOGGING-REMOTE

Configure enable

This attribute enables/disables the logging host debug.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</logging>

Command Syntax

debug logging host

Configure enable rsyslog

Enable/disable the rsyslog feature

Attribute Name: enable-rsyslog

Attribute Type: empty

Netconf edit-config payload

<remote-logging>

</enable-rsyslog>

</config>

</remote-logging>

</logging>

Command Syntax

feature rsyslog

Configure port

Use this attribute to configure the syslog server UDP port. Default value is 514

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: port

Attribute Type: uint16

Attribute Range: 1024-65535

Attribute Name: severity

Attribute Type: enum (0|1|2|3|4|5|6|7)

Netconf edit-config payload

<remote-logging>

<remote-servers>

<remote-server>

</config>

</config>

</server>

</servers>

</remote-server>

</remote-servers>

</remote-logging>

</logging>

Command Syntax

logging remote server (A.B.C.D|X:X::X:X|HOSTNAME) ((0|1|2|3|4|5|6|7)|) port <1024-65535> (vrf (NAME|management)|)

Configure severity

This atribute is used to specify the kind of messages by severity level. The default value is debug-detail. The possible values for levels are as follows: [Operator] 0-emerg; 1-alert; 2-critical; 3-error; 4-notify; 5-info [Debug] 3-error; 4-warning; 5-notif; 6-debug-info; 7-debug-detail

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: severity

Attribute Type: enum (0|1|2|3|4|5|6|7)

Netconf edit-config payload

<remote-logging>

<remote-servers>

<remote-server>

</config>

</config>

</server>

</servers>

</remote-server>

</remote-servers>

</remote-logging>

</logging>

Command Syntax

logging remote server (A.B.C.D|X:X::X:X|HOSTNAME) ((0|1|2|3|4|5|6|7)|) (vrf (NAME|management)|)

Configure disable default instance

Use this attribute to prevent default rsyslog config from being enabled at start up

Attribute Name: disable-default-instance

Attribute Type: empty

Netconf edit-config payload

<remote-logging>

<default-instance>

</disable-default-instance>

</config>

</default-instance>

</remote-logging>

</logging>

Command Syntax

logging remote disable-default

Configure remote server facility

This attribute is used to specify the facility level used by syslog messages. The default value is local7. The possible values are local0, local1, local2, local3, local4, local5, local6, local7 and user.

Attribute Name: remote-server-facility

Default Value: local7

Netconf edit-config payload

<remote-server-facility>local7</remote-server-facility>

</config>

</global>

</logging>

Command Syntax

Configure remote authpriv facility

Enable/disable logging authpriv facility for remote syslog server.

Attribute Name: remote-authpriv-facility

Attribute Type: empty

Netconf edit-config payload

</remote-authpriv-facility>

</config>

</global>

</logging>

Command Syntax

logging remote authpriv

IPI-LOGGING-CLI

Configure enable logging

Use this attribute to enable/disable CLI history logs. By default CLI history is enabled.

Attribute Name: enable-logging

Attribute Type: boolean

Netconf edit-config payload

<cli-logging>

<enable-logging>true</enable-logging>

</config>

</cli-logging>

</logging>

Command Syntax

logging cli

Configure cli-logging enable-logging

Use this attribute to enable/disable CLI history logs. By default CLI history is enabled.

Attribute Name: enable-logging

Attribute Type: boolean

Netconf edit-config payload

<cli-logging>

<enable-logging>true</enable-logging>

</config>

</cli-logging>

</logging>

Command Syntax

no logging cli

IPI-EVENT-MANAGER

Configure feature

Enable Event Manager

Attribute Name: feature

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<event-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager">

<feature>disable</feature>

</config>

</event-manager>

Command Syntax

event-manager (disable|enable)

Configure event pattern

Pattern to match

Attribute Name: event-pattern

Attribute Type: string

Attribute Name: event-type

Attribute Type: enum (syslog)

Attribute Name: event-id

Attribute Type: string

Attribute Range: 4-128

Attribute Name: severity

Attribute Type: enum (0|1|2|3|4|5|all)

Default Value: all

Netconf edit-config payload

<event-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager">

<event-entries>

<event-entry>

<event-name>NAME</event-name>

<event-name>WORD</event-name>

<event-type>syslog</event-type>

<event-id>EVENT-ID</event-id>

</config>

<event-pattern>PATTERN</event-pattern>

</event-entry>

</event-entries>

</event-manager>

Command Syntax

event-manager event NAME type (syslog) EVENT-ID ({ severity (0|1|2|3|4|5|all)| pattern PATTERN }|)

Configure action script

Name of script

Attribute Name: action-script

Attribute Type: string

Attribute Range: 4-64

Attribute Name: action-type

Attribute Type: enum (script)

Netconf edit-config payload

<event-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager">

<action-entries>

<action-entry>

<action-name>NAME</action-name>

<action-name>WORD</action-name>

<action-type>script</action-type>

</config>

<action-script>SCRIPT</action-script>

</action-entry>

</action-entries>

</event-manager>

Command Syntax

event-manager action NAME type (script) SCRIPT

Configure action name

Name of action

Attribute Name: action-name

Attribute Type: string

Attribute Range: 2-32

Attribute Name: event-name

Attribute Type: string

Attribute Range: 2-32

Netconf edit-config payload

<event-manager xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager">

<policy-name>NAME</policy-name>

<policy-name>NAME</policy-name>

<event-name>NAME</event-name>

</config>

<action-name>NAME</action-name>

</policy>

</policies>

</event-manager>

Command Syntax

event-manager policy NAME event NAME action NAME

clear event-manager statistics all

Netconf RPC payload

<event-manager-clear-statistics-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager"/>

Command Syntax

clear event-manager statistics all

clear event-manager statistics policy NAME

Attribute Name: policy-name

Attribute Type: string

Netconf RPC payload

<event-manager-clear-statistics-on-policy xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-event-manager">

<policy-name>NAME</policy-name>

</event-manager-clear-statistics-on-policy>

Command Syntax

clear event-manager statistics policy NAME

IPI-LOGGING-FAULT-MANAGEMENT

Configure severity

Use this attribute to set the severity level for the SYSLOG messages that will be sent over SNMP traps. The Default value to this attribute is 3(error).

This command is supported when following feature are enabled VLOGD feature

Attribute Name: severity

Attribute Type: enum (0|1|2|3|4|5|6|7)

Default Value: 3

Netconf edit-config payload

<snmp-syslog>

</config>

</snmp-syslog>

</logging>

Command Syntax

logging snmp-traps (0|1|2|3|4|5|6|7)

Configure enable fault management

Enable Fault Management System

This command is supported when following feature are enabled FMS feature

Attribute Name: enable-fault-management

Attribute Type: uint8

Netconf edit-config payload

<fault-management>

</enable-fault-management>

</config>

</fault-management>

</logging>

Command Syntax

fault-management enable

fault-management flush-db

Netconf RPC payload

<ipi-logging-fault-management_logging-fms-flush-db xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging"/>

Command Syntax

fault-management flush-db

fault-management shelve ALARM-TYPE

Attribute Name: alarm-type

Attribute Type: string

Netconf RPC payload

<ipi-logging-fault-management_logging-fms-shelve xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging">

<alarm-type>ALARM-TYPE</alarm-type>

</ipi-logging-fault-management_logging-fms-shelve>

Command Syntax

fault-management shelve ALARM-TYPE

fault-management close ACTIVE-ALARM-ID

Attribute Name: active-alarm-id

Attribute Type: string

Netconf RPC payload

<ipi-logging-fault-management_logging-fms-close xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-logging">

<active-alarm-id>ACTIVE-ALARM-ID</active-alarm-id>

</ipi-logging-fault-management_logging-fms-close>

Command Syntax

fault-management close ACTIVE-ALARM-ID

IPI-DHCP

Configure disable dhcp feature

Disable the DHCP client and DHCP relay on the device.

Attribute Name: disable-dhcp-feature

Attribute Type: uint8

Netconf edit-config payload

</disable-dhcp-feature>

</config>

</global>

</dhcp>

Command Syntax

no feature dhcp

IPI-RADIUS

Configure vrf name

VRF Name associated with this instance

This command is supported when following feature are enabled aaa feature

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

</config>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login key (0|7) WORD (vrf management|)

Configure timeout

VRF Name associated with this instance

This command is supported when following feature are enabled aaa feature

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: timeout

Attribute Type: uint8

Attribute Range: 3-60

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login timeout <3-60> (vrf management|)

Configure sequence number

Use this attribute to set the sequence-number/priority index for the RADIUS server

This command is supported when following feature are enabled aaa feature

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

</config>

<sequence-number>1</sequence-number>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8>

Configure secret key string

Shared key used between the authentication-server and the device

This command is supported when following feature are enabled aaa feature

Attribute Name: secret-key-string

Attribute Type: string

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

</config>

<secret-key-string>WORD</secret-key-string>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD

Configure accounting port

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages

This command is supported when following feature are enabled aaa feature

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

</config>

<accounting-port>0</accounting-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD acct-port <0-65535>

Configure host address

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

<accounting-port>0</accounting-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD acct-port <0-65535> timeout <3-60>

Configure authentication port

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS authentication messages

This command is supported when following feature are enabled aaa feature

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

</config>

<authentication-port>0</authentication-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535>

Configure key type

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages

This command is supported when following feature are enabled aaa feature

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

<authentication-port>0</authentication-port>

</config>

<accounting-port>0</accounting-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535> acct-port <0-65535>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

<authentication-port>0</authentication-port>

<accounting-port>0</accounting-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535> acct-port <0-65535> timeout <3-60>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

<authentication-port>0</authentication-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535> timeout <3-60>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: key-type

Attribute Type: enum (0|7)

Attribute Name: secret-key-string

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<key-type>0</key-type>

<secret-key-string>WORD</secret-key-string>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD timeout <3-60>

Configure server authentication-port

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS authentication messages

This command is supported when following feature are enabled aaa feature

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

</config>

<authentication-port>0</authentication-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> auth-port <0-65535>

Configure server accounting-port

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages

This command is supported when following feature are enabled aaa feature

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<authentication-port>0</authentication-port>

</config>

<accounting-port>0</accounting-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> auth-port <0-65535> acct-port <0-65535>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<authentication-port>0</authentication-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> auth-port <0-65535> timeout <3-60>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: authentication-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<authentication-port>0</authentication-port>

<accounting-port>0</accounting-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> auth-port <0-65535> acct-port <0-65535> timeout <3-60>

Configure server accounting-port

Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages

This command is supported when following feature are enabled aaa feature

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

</config>

<accounting-port>0</accounting-port>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> acct-port <0-65535>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Attribute Name: accounting-port

Attribute Type: uint16

Attribute Range: 0-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

<accounting-port>0</accounting-port>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> acct-port <0-65535> timeout <3-60>

Configure server timeout

To represent the timeout configured by the user

This command is supported when following feature are enabled aaa feature

Attribute Name: timeout

Attribute Type: uint8

Default Value: 5

Attribute Range: 3-60

Attribute Name: sequence-number

Attribute Type: uint8

Attribute Range: 1-8

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<remote-servers>

<host-address>A.B.C.D</host-address>

<host-address>A.B.C.D</host-address>

<sequence-number>1</sequence-number>

</config>

</server>

</remote-servers>

</vrf>

</vrfs>

</radius>

Command Syntax

radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> timeout <3-60>

Configure enable

This attribute is to enable/disable RADIUS debug logging

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</radius>

Command Syntax

debug radius

clear radius-server counters (vrf management|)

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<radius-clear-all-server-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">

<vrf-name>management</vrf-name>

</radius-clear-all-server-counters>

Command Syntax

clear radius-server counters (vrf management|)

clear radius-server host (A.B.C.D|X:X::X:X|HOSTNAME) counters (vrf (management|all)|)

Attribute Name: hostname

Attribute Type: union

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<radius-clear-server-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">

<vrf-name>management</vrf-name>

</radius-clear-server-counters>

Command Syntax

clear radius-server host (A.B.C.D|X:X::X:X|HOSTNAME) counters (vrf (management|all)|)

debug radius

Netconf RPC payload

<radius-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius"/>

Command Syntax

debug radius

no debug radius

Netconf RPC payload

<radius-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius"/>

Command Syntax

no debug radius

IPI-USER-MANAGEMENT

Configure enable

Use this attribute to enable user management debugging information.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<debug>

</enable>

</config>

</debug>

</user-management>

Command Syntax

debug user-mgmt

Configure password hashing algorithm

Use this attribute to set the hash algorithm for username configurations

Attribute Name: password-hashing-algorithm

Attribute Type: enum (md5|sha-256|sha-512)

Default Value: sha-512

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<password-hashing-algorithm>sha-512</password-hashing-algorithm>

</config>

</hashing>

</user-management>

Command Syntax

user password encryption default (md5|sha-256|sha-512)

Configure disable default user

Use this attribute to prevent default user from being enabled at start up

Attribute Name: disable-default-user

Attribute Type: empty

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

</disable-default-user>

</config>

</global>

</user-management>

Command Syntax

username disable-default

Configure username

Attribute Name: username

Attribute Type: string

Attribute Range: 2-32

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

</user>

</users>

</user-management>

Command Syntax

username USERNAME

Configure role

Use this attribute to set the user role. Operations that an user is allowed to perform are determined based on the role

Attribute Name: role

Attribute Type: enum (network-admin|network-engineer|network-operator|network-user)

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

<role>network-admin</role>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role (network-admin|network-engineer|network-operator|network-user)

Configure password

Use this attribute to add a user or to change a user password.

Attribute Name: password

Attribute Type: string

Attribute Range: 8-32

Attribute Name: role

Attribute Type: enum (network-admin|network-engineer|network-operator|network-user)

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

<role>network-admin</role>

</config>

<password>PASSWORD</password>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role (network-admin|network-engineer|network-operator|network-user) password PASSWORD

Configure password hashed

Use this attribute to specify user password in encrypted form. This option is provided for reconfiguring a user password using an earlier encrypted password that was available in running configuration display or get-config payload. Users are advised not to use this option for entering passwords generated in any other method

Attribute Name: password-hashed

Attribute Type: string

Attribute Range: 26-106

Attribute Name: role

Attribute Type: enum (network-admin|network-engineer|network-operator|network-user)

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

<role>network-admin</role>

</config>

<password-hashed>PASSWORD</password-hashed>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role (network-admin|network-engineer|network-operator|network-user) password encrypted PASSWORD

Configure rbac role

Use this attribute to set the user role. Operations that an user is allowed to perform are determined based on the role

Attribute Name: rbac-role

Attribute Type: string

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

<rbac-role>ROLE-NAME</rbac-role>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role ROLE-NAME

Configure user password

Use this attribute to add a user or to change a user password.

Attribute Name: password

Attribute Type: string

Attribute Range: 8-32

Attribute Name: rbac-role

Attribute Type: string

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

<rbac-role>ROLE-NAME</rbac-role>

</config>

<password>PASSWORD</password>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role ROLE-NAME password PASSWORD

Configure user password-hashed

Attribute Name: password-hashed

Attribute Type: string

Attribute Range: 26-106

Attribute Name: rbac-role

Attribute Type: string

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

<rbac-role>ROLE-NAME</rbac-role>

</config>

<password-hashed>PASSWORD</password-hashed>

</user>

</users>

</user-management>

Command Syntax

username USERNAME role ROLE-NAME password encrypted PASSWORD

Configure user password

Use this attribute to add a user or to change a user password.

Attribute Name: password

Attribute Type: string

Attribute Range: 8-32

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

<password>PASSWORD</password>

</user>

</users>

</user-management>

Command Syntax

username USERNAME password PASSWORD

Configure user password-hashed

Attribute Name: password-hashed

Attribute Type: string

Attribute Range: 26-106

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

<password-hashed>PASSWORD</password-hashed>

</user>

</users>

</user-management>

Command Syntax

username USERNAME password encrypted PASSWORD

debug user-mgmt

Netconf RPC payload

<user-management-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management"/>

Command Syntax

debug user-mgmt

no debug user-mgmt

Netconf RPC payload

<user-management-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management"/>

Command Syntax

no debug user-mgmt

IPI-SSH

Configure enable

Use this attribute to enable ssh debugging configurations

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<debug>

</enable>

</config>

</debug>

</ssh-server>

Command Syntax

debug ssh server

Configure vrf name

Use this attribute to enable the SSH server.

Attribute Name: enable

Attribute Type: boolean

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

feature ssh (vrf (NAME|management)|)

Configure vrf enable

Use this attribute to enable the SSH server.

Attribute Name: enable

Attribute Type: boolean

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

no feature ssh (vrf (NAME|management)|)

Configure port

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: port

Attribute Type: uint32

Attribute Range: 1024-65535

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server port <1024-65535> (vrf (NAME|management)|)

Configure max login attempts

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: max-login-attempts

Attribute Type: uint8

Default Value: 3

Attribute Range: 1-3

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

<max-login-attempts>1</max-login-attempts>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh login-attempts <1-3> (vrf (NAME|management)|)

Configure session limit

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: session-limit

Attribute Type: uint8

Attribute Range: 1-40

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

<session-limit>1</session-limit>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server session-limit <1-40> (vrf (NAME|management)|)

Configure default algorithm

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: default-algorithm

Attribute Type: empty

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</default-algorithm>

</config>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server default algorithm (vrf (NAME|management)|)

Configure chacha20 poly1305

Use this attribute to set the ChaCha20-Poly1305 Cipher

This command is supported when following feature are enabled ssh server feature

Attribute Name: chacha20-poly1305

Attribute Type: empty

Attribute Name: aes128-ctr

Attribute Type: empty

Attribute Name: aes192-ctr

Attribute Type: empty

Attribute Name: aes256-ctr

Attribute Type: empty

Attribute Name: aes128-cbc

Attribute Type: empty

Attribute Name: aes192-cbc

Attribute Type: empty

Attribute Name: aes256-cbc

Attribute Type: empty

Attribute Name: triple-des-cbc

Attribute Type: empty

Attribute Name: aes128-gcm

Attribute Type: empty

Attribute Name: aes256-gcm

Attribute Type: empty

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<encryption-algorithms>

</aes128-ctr>

</aes192-ctr>

</aes256-ctr>

</aes128-cbc>

</aes192-cbc>

</aes256-cbc>

</triple-des-cbc>

</aes128-gcm>

</aes256-gcm>

</chacha20-poly1305>

</config>

</encryption-algorithms>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server algorithm encryption { aes128-ctr| aes192-ctr| aes256-ctr| aes128-cbc| aes192-cbc| aes256-cbc| 3des-cbc| aes128-gcm| aes256-gcm| chacha20-poly1305 } (vrf (NAME|management)|)

Configure sntrup761x25519 sha512

Use this attribute to set the sntrup761x25519 SHA512 @openssh algorithm

This command is supported when following feature are enabled ssh server feature

Attribute Name: sntrup761x25519-sha512

Attribute Type: empty

Attribute Name: diffie-hellman-group1-sha1

Attribute Type: empty

Attribute Name: diffie-hellman-group14-sha1

Attribute Type: empty

Attribute Name: diffie-hellman-group14-sha256

Attribute Type: empty

Attribute Name: diffie-hellman-group16-sha512

Attribute Type: empty

Attribute Name: diffie-hellman-group18-sha512

Attribute Type: empty

Attribute Name: diffie-hellman-group-exchange-sha1

Attribute Type: empty

Attribute Name: diffie-hellman-group-exchange-sha256

Attribute Type: empty

Attribute Name: ecdh-sha2-nistp256

Attribute Type: empty

Attribute Name: ecdh-sha2-nistp384

Attribute Type: empty

Attribute Name: ecdh-sha2-nistp521

Attribute Type: empty

Attribute Name: curve25519-sha256

Attribute Type: empty

Attribute Name: curve25519-sha256-libssh-org

Attribute Type: empty

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<kex-algorithms>

</diffie-hellman-group1-sha1>

</diffie-hellman-group14-sha1>

</diffie-hellman-group14-sha256>

</diffie-hellman-group16-sha512>

</diffie-hellman-group18-sha512>

</diffie-hellman-group-exchange-sha1>

</diffie-hellman-group-exchange-sha256>

</ecdh-sha2-nistp256>

</ecdh-sha2-nistp384>

</ecdh-sha2-nistp521>

</curve25519-sha256>

</curve25519-sha256-libssh-org>

</sntrup761x25519-sha512>

</config>

</kex-algorithms>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server algorithm kex { diffie-hellman-group1-sha1| diffie-hellman-group14-sha1| diffie-hellman-group14-sha256| diffie-hellman-group16-sha512| diffie-hellman-group18-sha512| diffie-hellman-group-exchange-sha1| diffie-hellman-group-exchange-sha256| ecdh-sha2-nistp256| ecdh-sha2-nistp384| ecdh-sha2-nistp521| curve25519-sha256| curve25519-sha256-libssh-org| sntrup761x25519-sha512 } (vrf (NAME|management)|)

Configure umac 128 etm

Use this attribute to set the UMAC-128-ETM @openssh.com MAC

This command is supported when following feature are enabled ssh server feature

Attribute Name: umac-128-etm

Attribute Type: empty

Attribute Name: hmac-sha1

Attribute Type: empty

Attribute Name: hmac-sha1-96

Attribute Type: empty

Attribute Name: hmac-sha2-256

Attribute Type: empty

Attribute Name: hmac-sha2-512

Attribute Type: empty

Attribute Name: hmac-md5

Attribute Type: empty

Attribute Name: hmac-md5-96

Attribute Type: empty

Attribute Name: umac-64

Attribute Type: empty

Attribute Name: umac-128

Attribute Type: empty

Attribute Name: hmac-sha1-etm

Attribute Type: empty

Attribute Name: hmac-sha1-96-etm

Attribute Type: empty

Attribute Name: hmac-sha2-256-etm

Attribute Type: empty

Attribute Name: hmac-sha2-512-etm

Attribute Type: empty

Attribute Name: hmac-md5-etm

Attribute Type: empty

Attribute Name: hmac-md5-96-etm

Attribute Type: empty

Attribute Name: umac-64-etm

Attribute Type: empty

Netconf edit-config payload

<ssh-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<mac-algorithms>

</hmac-sha1>

</hmac-sha1-96>

</hmac-sha2-256>

</hmac-sha2-512>

</hmac-md5>

</hmac-md5-96>

</umac-64>

</umac-128>

</hmac-sha1-etm>

</hmac-sha1-96-etm>

</hmac-sha2-256-etm>

</hmac-sha2-512-etm>

</hmac-md5-etm>

</hmac-md5-96-etm>

</umac-64-etm>

</umac-128-etm>

</config>

</mac-algorithms>

</vrf>

</vrfs>

</ssh-server>

Command Syntax

ssh server algorithm mac { hmac-sha1| hmac-sha1-96| hmac-sha2-256| hmac-sha2-512| hmac-md5| hmac-md5-96| umac-64| umac-128| hmac-sha1-etm| hmac-sha1-96-etm| hmac-sha2-256-etm| hmac-sha2-512-etm| hmac-md5-etm| hmac-md5-96-etm| umac-64-etm| umac-128-etm } (vrf (NAME|management)|)

Configure public key

Use this attribute to set the ssh public-key

Attribute Name: public-key

Attribute Type: string

Netconf edit-config payload

<user-management xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-user-management">

<users>

<user>

<username>USERNAME</username>

<username>USERNAME</username>

</config>

<ssh-keys xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<public-key>LINE</public-key>

</config>

</ssh-keys>

</user>

</users>

</user-management>

Command Syntax

username USERNAME sshkey LINE

debug ssh server

Netconf RPC payload

<ssh-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh"/>

Command Syntax

debug ssh server

no debug ssh server

Netconf RPC payload

<ssh-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh"/>

Command Syntax

no debug ssh server

clear ssh hosts

Netconf RPC payload

<ssh-clear-hosts xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh"/>

Command Syntax

clear ssh hosts

ssh keygen host dsa (vrf (NAME|management)|) (force|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-server-dsa-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrf-name>NAME</vrf-name>

</ssh-generate-server-dsa-key>

Command Syntax

ssh keygen host dsa (vrf (NAME|management)|) (force|)

ssh keygen host rsa (length <1024-4096>|) (vrf (NAME|management)|) (force|)

Attribute Name: length

Attribute Type: uint32

Default Value: 2048

Attribute Range: 1024-4096

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-server-rsa-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrf-name>NAME</vrf-name>

</ssh-generate-server-rsa-key>

Command Syntax

ssh keygen host rsa (length <1024-4096>|) (vrf (NAME|management)|) (force|)

ssh keygen host ecdsa (length (256|384|521)|) (vrf (NAME|management)|) (force|)

Attribute Name: length

Attribute Type: enum (256|384|521)

Default Value: 521

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-server-ecdsa-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrf-name>NAME</vrf-name>

</ssh-generate-server-ecdsa-key>

Command Syntax

ssh keygen host ecdsa (length (256|384|521)|) (vrf (NAME|management)|) (force|)

ssh keygen host ed25519 (vrf (NAME|management)|) (force|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-server-ed25519-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrf-name>NAME</vrf-name>

</ssh-generate-server-ed25519-key>

Command Syntax

ssh keygen host ed25519 (vrf (NAME|management)|) (force|)

clear ssh host-key ((dsa|rsa|ecdsa|ed25519)|) (vrf (NAME|management)|)

Attribute Name: type

Attribute Type: enum (all-keys|dsa|rsa|ecdsa|ed25519)

Default Value: all-keys

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<ssh-clear-server-keys xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<vrf-name>NAME</vrf-name>

</ssh-clear-server-keys>

Command Syntax

clear ssh host-key ((dsa|rsa|ecdsa|ed25519)|) (vrf (NAME|management)|)

username USERNAME keypair rsa (length <1024-4096>|) (force|)

Attribute Name: user-name

Attribute Type: string

Attribute Name: length

Attribute Type: uint32

Default Value: 4096

Attribute Range: 1024-4096

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-user-rsa-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<user-name>USERNAME</user-name>

</ssh-generate-user-rsa-key>

Command Syntax

username USERNAME keypair rsa (length <1024-4096>|) (force|)

username USERNAME keypair dsa (force|)

Attribute Name: user-name

Attribute Type: string

Attribute Name: force

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<ssh-generate-user-dsa-key xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<user-name>USERNAME</user-name>

</ssh-generate-user-dsa-key>

Command Syntax

username USERNAME keypair dsa (force|)

clear ssh keypair user USERNAME

Attribute Name: user-name

Attribute Type: string

Netconf RPC payload

<ssh-clear-user-keys xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ssh">

<user-name>USERNAME</user-name>

</ssh-clear-user-keys>

Command Syntax

clear ssh keypair user USERNAME

IPI-TELNET

Configure enable

Use this attribute to enable telnet debugging configurations

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<telnet-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet">

<debug>

</enable>

</config>

</debug>

</telnet-server>

Command Syntax

debug telnet server

Configure vrf name

Use this attribute to enable the Telnet server.

Attribute Name: enable

Attribute Type: boolean

Netconf edit-config payload

<telnet-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</telnet-server>

Command Syntax

feature telnet (vrf (NAME|management)|)

Configure vrf enable

Use this attribute to enable the Telnet server.

Attribute Name: enable

Attribute Type: boolean

Netconf edit-config payload

<telnet-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</telnet-server>

Command Syntax

no feature telnet (vrf (NAME|management)|)

Configure port

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: port

Attribute Type: uint32

Attribute Range: 1024-65535

Netconf edit-config payload

<telnet-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</telnet-server>

Command Syntax

telnet server port <1024-65535> (vrf (NAME|management)|)

Configure session limit

VRF Name associated with this instance

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: session-limit

Attribute Type: uint8

Attribute Range: 1-40

Netconf edit-config payload

<telnet-server xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet">

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

<session-limit>1</session-limit>

</config>

</vrf>

</vrfs>

</telnet-server>

Command Syntax

telnet server session-limit <1-40> (vrf (NAME|management)|)

debug telnet server

Netconf RPC payload

<telnet-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet"/>

Command Syntax

debug telnet server

no debug telnet server

Netconf RPC payload

<telnet-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-telnet"/>

Command Syntax

no debug telnet server

IPI-NTP

Configure feature enable

Use this attribute to enable or disable NTP feature.

Attribute Name: feature-enable

Attribute Type: boolean

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<feature-enable>true</feature-enable>

</vrf>

</vrfs>

</ntp>

Command Syntax

feature ntp (vrf (management|NAME)|)

Configure vrf name

Use this attribute to enable or disable NTP feature.

Attribute Name: feature-enable

Attribute Type: boolean

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<feature-enable>true</feature-enable>

</vrf>

</vrfs>

</ntp>

Command Syntax

no feature ntp (vrf (management|NAME)|)

Configure enable ntp

Use this attribute to enable or disable NTP server

Attribute Name: enable-ntp

Attribute Type: boolean

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<enable-ntp>true</enable-ntp>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp enable (vrf (management|NAME)|)

Configure vrf enable-ntp

Use this attribute to enable or disable NTP server

Attribute Name: enable-ntp

Attribute Type: boolean

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<enable-ntp>true</enable-ntp>

</vrf>

</vrfs>

</ntp>

Command Syntax

no ntp enable (vrf (management|NAME)|)

Configure enable logging

Use this attribute to specify the vrf for which ntp feature is enabled

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: enable-logging

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</enable-logging>

</config>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp logging (vrf (management|NAME)|)

Configure enable local master

Use this attribute to configure the device as an NTP server.

Attribute Name: enable-local-master

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ref-clock-master>

</enable-local-master>

</config>

</ref-clock-master>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp master (vrf (management|NAME)|)

Configure local stratum

Use this attribute to configure stratum level for a NTP server.

Attribute Name: local-stratum

Attribute Type: uint8

Attribute Range: 1-15

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ref-clock-master>

<local-stratum>1</local-stratum>

</config>

</ref-clock-master>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp master stratum <1-15> (vrf (management|NAME)|)

Configure enable ntp auth

Use this attribute to enable NTP authentication.

Attribute Name: enable-ntp-auth

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

</enable-ntp-auth>

</config>

</authentication>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp authenticate (vrf (management|NAME)|)

Configure ntp trusted keys

Use this attribute to configure one or more trusted authentication keys. If a key is trusted, the device will synchronize with a system that specifies this key in its NTP packets

Attribute Name: ntp-trusted-keys

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ntp-trusted-keys>1</ntp-trusted-keys>

</config>

</authentication>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp trusted-key <1-65535> (vrf (management|NAME)|)

Configure ntp request key

Use this to attribute to configure request key which shall be used as password for ntpdc utility.

Attribute Name: ntp-request-key

Attribute Type: uint32

Attribute Range: 1-65534

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ntp-request-key>1</ntp-request-key>

</config>

</authentication>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp request-key <1-65534> (vrf (management|NAME)|)

Configure key id

Use this attribute to set an NTP authentication key.

Attribute Name: key-id

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: key-value

Attribute Type: string

Attribute Name: key-type

Attribute Type: enum (0|7)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ntp-keys>

<ntp-key>

<key-id>1</key-id>

<key-id>1</key-id>

<key-value>WORD</key-value>

<key-type>1</key-type>

</config>

</ntp-key>

</ntp-keys>

</authentication>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp authentication-key <1-65535> md5 WORD 7 (vrf (management|NAME)|)

Configure key value

Use this attribute to set an NTP authentication key.

Attribute Name: key-id

Attribute Type: uint32

Attribute Range: 1-65535

Attribute Name: key-value

Attribute Type: string

Attribute Name: key-type

Attribute Type: enum (0|7)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<ntp-keys>

<ntp-key>

<key-id>1</key-id>

<key-id>1</key-id>

<key-value>WORD</key-value>

<key-type>0</key-type>

</config>

</ntp-key>

</ntp-keys>

</authentication>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp authentication-key <1-65535> md5 WORD (vrf (management|NAME)|)

Configure prefer

preferred NTP server/peer

Attribute Name: prefer

Attribute Type: empty

Attribute Name: auth-key

Attribute Type: uint32

Default Value: 65535

Attribute Range: 1-65535

Attribute Name: minpoll

Attribute Type: uint16

Default Value: 4

Attribute Range: 4-16

Attribute Name: maxpoll

Attribute Type: uint16

Default Value: 6

Attribute Range: 4-16

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<server-address>A.B.C.D</server-address>

<server-address>A.B.C.D</server-address>

<auth-key>1</auth-key>

</config>

</prefer>

</server>

</servers>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp server (A.B.C.D|X:X::X:X|HOSTNAME) { key <1-65535>| minpoll <4-16>| maxpoll <4-16>| prefer } (vrf (management|NAME)|)

Configure server address

Use this attribute to set the NTP server IP address or hostname

Attribute Name: server-address

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<server-address>A.B.C.D</server-address>

<server-address>A.B.C.D</server-address>

</config>

</server>

</servers>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp server (A.B.C.D|X:X::X:X|HOSTNAME) (vrf (management|NAME)|)

Configure peer address

preferred NTP server/peer

Attribute Name: prefer

Attribute Type: empty

Attribute Name: auth-key

Attribute Type: uint32

Default Value: 65535

Attribute Range: 1-65535

Attribute Name: minpoll

Attribute Type: uint16

Default Value: 4

Attribute Range: 4-16

Attribute Name: maxpoll

Attribute Type: uint16

Default Value: 6

Attribute Range: 4-16

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<peers>

<peer>

<peer-address>A.B.C.D</peer-address>

<peer-address>A.B.C.D</peer-address>

<auth-key>1</auth-key>

</config>

</prefer>

</peer>

</peers>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp peer (A.B.C.D|X:X::X:X|HOSTNAME) { key <1-65535>| minpoll <4-16>| maxpoll <4-16>| prefer } (vrf (management|NAME)|)

Configure peer peer-address

Use this attribute to set the NTP peer IP address or hostname

Attribute Name: peer-address

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<peers>

<peer>

<peer-address>A.B.C.D</peer-address>

<peer-address>A.B.C.D</peer-address>

</config>

</peer>

</peers>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp peer (A.B.C.D|X:X::X:X|HOSTNAME) (vrf (management|NAME)|)

Configure minimum pkt spacing

Use this attribute to specify the minimum packet spacing to be permitted

Attribute Name: minimum-pkt-spacing

Attribute Type: uint16

Attribute Range: 1-65535

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<rate-limiting>

<minimum-pkt-spacing>1</minimum-pkt-spacing>

</config>

</rate-limiting>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp discard { minimum <1-65535> } (vrf (management|NAME)|)

Configure netmask

use this attribute to specify the allowed NTP client IP network mask

Attribute Name: netmask

Attribute Type: union

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<access-control-entries>

<access-control-entry>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

</config>

<netmask>NTP_CLIENT_IP_NET_MASK_T</netmask>

</access-control-entry>

</access-control-entries>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp allow (A.B.C.D|X:X::X:X) mask (A.B.C.D|<1-128>) (vrf (management|NAME)|)

Configure access options

use this attribute to specify the allowed access options for NTP client

Attribute Name: access-options

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<access-control-entries>

<access-control-entry>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

</config>

<access-options>kod</access-options>

</access-control-entry>

</access-control-entries>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp allow {kod|nopeer|noserve|noquery|nomodify|notrap|limited} (vrf (management|NAME)|)

Configure client ip address

use this attribute to specify the allowed access options for NTP client

Attribute Name: access-options

Attribute Name: netmask

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<access-control-entries>

<access-control-entry>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

<netmask>NTP_CLIENT_IP_NET_MASK_T</netmask>

</config>

<access-options>kod</access-options>

</access-control-entry>

</access-control-entries>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp allow mask {kod|nopeer|noserve|noquery|nomodify|notrap|limited} (vrf (management|NAME)|)

Configure access-control-entry client-ip-address

use this attribute to specify the allowed NTP client IP address

Attribute Name: client-ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<access-control-entries>

<access-control-entry>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

<client-ip-address>CML_IP_ADDR_T</client-ip-address>

</config>

</access-control-entry>

</access-control-entries>

</vrf>

</vrfs>

</ntp>

Command Syntax

ntp allow (vrf (management|NAME)|)

Configure enable

Use this attribute to enable NTP debug logs

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</ntp>

Command Syntax

debug ntp

clear ntp statistics (all-peers|io|local|memory)

Attribute Name: statistics-type

Attribute Type: enum (all-peers|io|local|memory)

Netconf RPC payload

<ntp-clear-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ntp">

<statistics-type>all-peers</statistics-type>

</ntp-clear-statistics>

Command Syntax

clear ntp statistics (all-peers|io|local|memory)

ntp sync-retry (vrf (management|NAME)|)

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<ntp-retry-server-synchronization xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ntp">

<vrf-name>management</vrf-name>

</ntp-retry-server-synchronization>

Command Syntax

ntp sync-retry (vrf (management|NAME)|)

debug ntp

Netconf RPC payload

<ntp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ntp"/>

Command Syntax

debug ntp

no debug ntp

Netconf RPC payload

<ntp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-ntp"/>

Command Syntax

no debug ntp

IPI-AAA

Configure authentication method rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authentication-method-rule>LINE</authentication-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login default (vrf (management|NAME)|) group LINE

Configure vrf name

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authentication-method-rule>LINE</authentication-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login default (vrf (management|NAME)|) local

Configure vrf authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authentication-method-rule>LINE</authentication-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login default (vrf (management|NAME)|) none

Configure vrf authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authentication-method-rule>LINE</authentication-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login default (vrf (management|NAME)|) local none

Configure accounting method rule

Use this attribute to set AAA methods for accounting

Attribute Name: accounting-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<accounting-method-rule>LINE</accounting-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa accounting default (vrf (management|NAME)|) group LINE

Configure vrf accounting-method-rule

Use this attribute to set AAA methods for accounting

Attribute Name: accounting-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<accounting-method-rule>LINE</accounting-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa accounting default (vrf (management|NAME)|) local

Configure authorization method rule

Use this attribute to set AAA methods for authorization

Attribute Name: authorization-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authorization-method-rule>LINE</authorization-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authorization default (vrf (management|NAME)|) group LINE

Configure vrf authorization-method-rule

Use this attribute to set AAA methods for authorization

Attribute Name: authorization-method-rule

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<authorization-method-rule>LINE</authorization-method-rule>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authorization default (vrf (management|NAME)|) local

Configure error enable

This is to enable error message on login failures

Attribute Name: error-enable

Attribute Type: uint8

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

</error-enable>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login error-enable (vrf (management|NAME)|)

Configure enable fallback

This is to enable fallback to local authentication if remote authentication is configured and all AAA servers are unreachable

Attribute Name: enable-fallback

Attribute Type: uint8

Attribute Name: non-existent

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</non-existent>

</config>

</enable-fallback>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa authentication login default fallback error local (non-existent-user|) (vrf (management|NAME)|)

Configure group type

This is to create server group type

Attribute Name: group-type

Attribute Type: enum (tacacs+|radius)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<server-groups>

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-type>tacacs+</group-type>

</config>

<group-type>tacacs+</group-type>

</server-group>

</server-groups>

</vrf>

</vrfs>

</aaa>

Command Syntax

aaa group server (tacacs+|radius) WORD (vrf (management|NAME)|)

Configure host address

Use this attribute to add a host address to a server group

Attribute Name: host-address

Attribute Type: union

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<server-groups>

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-type>tacacs+</group-type>

</config>

<group-type>tacacs+</group-type>

<server-addresses>

<server-address>

<host-address>CML_HOSTNAME_T</host-address>

<host-address>CML_HOSTNAME_T</host-address>

</config>

</server-address>

</server-addresses>

</server-group>

</server-groups>

</vrf>

</vrfs>

</aaa>

Command Syntax

server (A.B.C.D|X:X::X:X|WORD)

Configure group name

Use this attribute to add a host address to a server group

Attribute Name: host-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>management</vrf-name>

<vrf-name>management</vrf-name>

</config>

<server-groups>

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-type>tacacs+</group-type>

</config>

<group-type>tacacs+</group-type>

<server-addresses>

<server-address>

<host-address>CML_HOSTNAME_T</host-address>

<host-address>CML_HOSTNAME_T</host-address>

</config>

</server-address>

</server-addresses>

</server-group>

</server-groups>

</vrf>

</vrfs>

</aaa>

Command Syntax

server server

Configure aaa-authentication-console authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authentication-method-rule>LINE</authentication-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authentication login console group LINE

Configure aaa-authentication-console authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authentication-method-rule>LINE</authentication-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authentication login console local

Configure aaa-authentication-console authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authentication-method-rule>LINE</authentication-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authentication login console none

Configure aaa-authentication-console authentication-method-rule

Use this attribute to set AAA methods for authentication

Attribute Name: authentication-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authentication-method-rule>LINE</authentication-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authentication login console local none

Configure aaa-authentication-console authorization-method-rule

Use this attribute to set AAA methods for console authorization

Attribute Name: authorization-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authorization-method-rule>LINE</authorization-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authorization console group LINE

Configure aaa-authentication-console authorization-method-rule

Use this attribute to set AAA methods for console authorization

Attribute Name: authorization-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<authorization-method-rule>LINE</authorization-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authorization console local

Configure aaa-authentication-console accounting-method-rule

Use this attribute to set AAA methods for console accounting

Attribute Name: accounting-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<accounting-method-rule>LINE</accounting-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa accounting console group LINE

Configure aaa-authentication-console accounting-method-rule

Use this attribute to set AAA methods for console accounting

Attribute Name: accounting-method-rule

Attribute Type: string

Netconf edit-config payload

<aaa-authentication-console>

<accounting-method-rule>LINE</accounting-method-rule>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa accounting console local

Configure user non existent

This is to enable fallback to local authentication if remote authentication is configured and all AAA servers are unreachable

Attribute Name: enable-fallback

Attribute Type: boolean

Attribute Name: user-non-existent

Attribute Type: empty

Netconf edit-config payload

<aaa-authentication-console>

</user-non-existent>

<enable-fallback>true</enable-fallback>

</config>

</aaa-authentication-console>

</aaa>

Command Syntax

aaa authentication login console fallback error local (non-existent-user|)

Configure authentication max failure attempts

Use this attribute to set the number of unsuccessful authentication attempts before a user is locked out

Attribute Name: authentication-max-failure-attempts

Attribute Type: uint8

Attribute Range: 1-25

Netconf edit-config payload

<aaa-user>

<authentication-max-failure-attempts>1</authentication-max-failure-attempts>

</config>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication attempts max-fail <1-25>

Configure local user unlock timeout

Use this attribute to set unlock timeout after local user/s locked out

Attribute Name: local-user-unlock-timeout

Attribute Type: uint16

Attribute Range: 1-3600

Netconf edit-config payload

<aaa-user>

<local-user-unlock-timeout>1</local-user-unlock-timeout>

</config>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication unlock-timeout <1-3600>

Configure enable

Enable feature of applying policy to update password

Attribute Name: enable

Attribute Type: uint8

Netconf edit-config payload

<aaa-user>

<password-policy>

</enable>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy

Configure numeric count

The minimum number of digits

Attribute Name: numeric-count

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

<numeric-count>1</numeric-count>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy numeric-count <1-32>

Configure uppercase count

The minimum number of upper letters

Attribute Name: uppercase-count

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

<uppercase-count>1</uppercase-count>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy uppercase-count <1-32>

Configure lowercase count

The minimum number of lower letters

Attribute Name: lowercase-count

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

<lowercase-count>1</lowercase-count>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy lowercase-count <1-32>

Configure special count

The minimum number of special characters

Attribute Name: special-count

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

<special-count>1</special-count>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy special-count <1-32>

Configure history

history

Attribute Name: history

Attribute Type: uint16

Attribute Range: 1-400

Netconf edit-config payload

<aaa-user>

<password-policy>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy history <1-400>

Configure maxsequence

The maximum number of monotonic character sequences to be accepted.

Attribute Name: maxsequence

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy maxsequence <1-32>

Configure disable usercheck

Disable the check if password contains username

Attribute Name: disable-usercheck

Attribute Type: empty

Netconf edit-config payload

<aaa-user>

<password-policy>

</disable-usercheck>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy disable-usercheck

Configure maxrepeat

The maximum number of same consecutive characters to be accepted

Attribute Name: maxrepeat

Attribute Type: uint8

Attribute Range: 1-32

Netconf edit-config payload

<aaa-user>

<password-policy>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy maxrepeat <1-32>

Configure min length

Minimum password length

Attribute Name: min-length

Attribute Type: uint8

Attribute Range: 8-32

Netconf edit-config payload

<aaa-user>

<password-policy>

<min-length>8</min-length>

</config>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password-policy min-length <8-32>

Configure role

use this attribute to set the role for password expiry

Attribute Name: role

Attribute Type: enum (network-admin|network-engineer|network-operator|network-user)

Attribute Name: expire

Attribute Type: uint16

Attribute Range: 0-1000

Netconf edit-config payload

<aaa-user>

<password-policy>

<role-expdays>

<role-expday>

<role>network-admin</role>

<role>network-admin</role>

</config>

</role-expday>

</role-expdays>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password expire <0-1000> role (network-admin|network-engineer|network-operator|network-user)

Configure user

use this attribute to set the username for password expiry

Attribute Name: user

Attribute Type: string

Attribute Name: expire

Attribute Type: uint16

Attribute Range: 0-1000

Netconf edit-config payload

<aaa-user>

<password-policy>

<user-expdays>

<user-expday>

</config>

</user-expday>

</user-expdays>

</password-policy>

</aaa-user>

</aaa>

Command Syntax

aaa local authentication password expire <0-1000> user WORD

Configure debug enable

Use this attribute to display AAA debugging information.

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</aaa>

Command Syntax

debug aaa

Netconf RPC payload

<aaa-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-aaa"/>

Command Syntax

debug aaa

no debug aaa

Netconf RPC payload

<aaa-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-aaa"/>

Command Syntax

no debug aaa

clear aaa local user lockout username USERNAME

Attribute Name: username

Attribute Type: string

Attribute Range: 2-32

Netconf RPC payload

<aaa-clear-local-user-lockout xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-aaa">

<username>USERNAME</username>

</aaa-clear-local-user-lockout>

Command Syntax

clear aaa local user lockout username USERNAME

IPI-DHCP-RELAY

Configure disable dhcpv4 relay

Use this attribute to disable the DHCP relay global config

Attribute Name: disable-dhcpv4-relay

Attribute Type: uint8

Netconf edit-config payload

<relay>

</disable-dhcpv4-relay>

</config>

</global>

</relay>

</dhcp>

Command Syntax

no ip dhcp relay

Configure disable dhcpv6 relay

Use this attribute to disable the DHCP relay global config

Attribute Name: disable-dhcpv6-relay

Attribute Type: uint8

Netconf edit-config payload

<relay>

</disable-dhcpv6-relay>

</config>

</global>

</relay>

</dhcp>

Command Syntax

no ipv6 dhcp relay

Configure gi addr

Configure the custom gi-addr address

Attribute Name: gi-addr

Attribute Type: inet:ipv4-address

Attribute Name: ipv4-relay-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</ipv4-relay-interface>

</config>

<gi-addr>A.B.C.D</gi-addr>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ip dhcp relay gi-addr A.B.C.D

Configure src ip addr

Use custom gi-addr as the source address

Attribute Name: src-ip-addr

Attribute Type: empty

Attribute Name: ipv4-relay-interface

Attribute Type: empty

Attribute Name: gi-addr

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

</ipv4-relay-interface>

<gi-addr>A.B.C.D</gi-addr>

</config>

</src-ip-addr>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ip dhcp relay gi-addr A.B.C.D src-ip-addr

Configure ipv6 gi addr

ipv6-gi-addr to be used in the DHCP relay

Attribute Name: ipv6-gi-addr

Attribute Type: inet:ipv6-address

Attribute Name: ipv6-relay-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</ipv6-relay-interface>

</config>

<ipv6-gi-addr>X:X::X:X</ipv6-gi-addr>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay gi-addr X:X::X:X

Configure ipv6 src addr

Use custom gi-addr as the source address

Attribute Name: ipv6-src-addr

Attribute Type: empty

Attribute Name: ipv6-relay-interface

Attribute Type: empty

Attribute Name: ipv6-gi-addr

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<relay>

</ipv6-relay-interface>

<ipv6-gi-addr>X:X::X:X</ipv6-gi-addr>

</config>

</ipv6-src-addr>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay gi-addr X:X::X:X src-ip-addr

Configure ipv4 relay interface

Enable relay on Client facing interface

Attribute Name: ipv4-relay-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</config>

</ipv4-relay-interface>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ip dhcp relay

Configure ipv4 uplink interface

Specify the interface as an uplink interface(Server facing)

Attribute Name: ipv4-uplink-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</config>

</ipv4-uplink-interface>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ip dhcp relay uplink

Configure ipv4 group name

Correlate specified interface to a specified DHCP server group.

Attribute Name: ipv4-group-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

</config>

<ipv4-group-name>GROUP-NAME</ipv4-group-name>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ip dhcp relay server-select GROUP-NAME

Configure ipv6 relay interface

Enable IPv6 relay on Client facing interface

Attribute Name: ipv6-relay-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</config>

</ipv6-relay-interface>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay

Configure ipv6 uplink interface

Specify the interface as an uplink interface(Server facing)

Attribute Name: ipv6-uplink-interface

Attribute Type: empty

Netconf edit-config payload

<relay>

</config>

</ipv6-uplink-interface>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay uplink

Configure ipv6 group name

Correlate specified interface to a specified DHCPv6 server group.

Attribute Name: ipv6-group-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

</config>

<ipv6-group-name>GROUP-NAME</ipv6-group-name>

</interface>

</interfaces>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay server-select GROUP-NAME

Configure link selection source ip

Enable link selection sub-option (5) in the option-82 in DHCP packet

Attribute Name: link-selection-source-ip

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information source-ip A.B.C.D

Configure enable option82

Enable the device to insert and remove option-82 information on DHCP packets forwarded by the DHCP relay agent.

Attribute Name: enable-option82

Attribute Type: uint8

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-option82>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option

Configure enable dhcpv6 pd route injection

Enable the route installation from the prefixes learned through prefix delegation.

Attribute Name: enable-dhcpv6-pd-route-injection

Attribute Type: uint8

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-dhcpv6-pd-route-injection>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay pd-route-injection

Configure remote id

Remote host identifier. Use option 82 to provide the DHCP server information about the DHCP client

Attribute Name: remote-id

Attribute Type: union

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

<remote-id>WORD</remote-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option remote-id WORD

Configure vrf name

Remote host identifier. Use option 82 to provide the DHCP server information about the DHCP client

Attribute Name: remote-id

Attribute Type: union

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

<remote-id>0</remote-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option remote-id hostname

Configure vrf remote-id

Remote host identifier. Use option 82 to provide the DHCP server information about the DHCP client

Attribute Name: remote-id

Attribute Type: union

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

<remote-id>WORD</remote-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option remote-id WORD

Configure vrf remote-id

Remote host identifier. Use option 82 to provide the DHCP server information about the DHCP client

Attribute Name: remote-id

Attribute Type: union

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

<remote-id>0</remote-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option remote-id hostname

Configure enable option82 always on

Keep option-82 information on DHCP packets forwarded by the DHCP relay agent.

Attribute Name: enable-option82-always-on

Attribute Type: uint8

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

</enable-option82-always-on>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option always-on

Configure vrf enable-option82-always-on

Keep option-82 information on DHCP packets forwarded by the DHCP relay agent.

Attribute Name: enable-option82-always-on

Attribute Type: uint8

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</enable-option82>

</config>

</enable-option82-always-on>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option always-on

Configure subscriber id

Subscriber identifier. Use this option to allows the service provider to assign/activate subscriber-specific actions

Attribute Name: subscriber-id

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<subscriber-id>WORD</subscriber-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay information option subscriber-id WORD

Configure vrf link-selection-source-ip

Enable link selection sub-option (5) in the option-82 in DHCP packet

Attribute Name: link-selection-source-ip

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information source-ip A.B.C.D

Configure vrf enable-option82

Enable the device to insert and remove option-82 information on DHCP packets forwarded by the DHCP relay agent.

Attribute Name: enable-option82

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-option82>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay information option

Configure vrf enable-dhcpv6-pd-route-injection

Enable the route installation from the prefixes learned through prefix delegation.

Attribute Name: enable-dhcpv6-pd-route-injection

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-dhcpv6-pd-route-injection>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay pd-route-injection

Configure enable dhcpv6 duplicate clients

Specify that the DHCPv6 relay agent uses the clients incoming interfaces to differentiate between the duplicate DUIDs.

Attribute Name: enable-dhcpv6-duplicate-clients

Attribute Type: empty

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</enable-dhcpv6-duplicate-clients>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay duplicate-clients

Configure vrf subscriber-id

Subscriber identifier. Use this option to allows the service provider to assign/activate subscriber-specific actions

Attribute Name: subscriber-id

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<subscriber-id>WORD</subscriber-id>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay information option subscriber-id WORD

Configure interface type

DHCP relay vpn interface type

Attribute Name: interface-type

Attribute Type: enum (l3vpn|evpn)

Attribute Name: interface-direction

Attribute Type: enum (uplink|downlink)

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-vpn-links>

<ipv4-vpn-link>

<interface-type>l3vpn</interface-type>

<interface-type>l3vpn</interface-type>

<interface-direction>uplink</interface-direction>

</config>

</ipv4-vpn-link>

</ipv4-vpn-links>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay (uplink|downlink) (l3vpn|evpn)

Configure interface direction

DHCP relay vpn interface type

Attribute Name: interface-type

Attribute Type: enum (l3vpn|evpn)

Attribute Name: interface-direction

Attribute Type: enum (uplink|downlink)

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-vpn-links>

<ipv4-vpn-link>

<interface-type>l3vpn</interface-type>

<interface-type>l3vpn</interface-type>

<interface-direction>uplink</interface-direction>

</config>

</ipv4-vpn-link>

</ipv4-vpn-links>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay (uplink|downlink) (l3vpn|evpn)

Configure interface type v6

DHCPv6 relay vpn interface type

This command is supported when following feature are enabled IPV6 feature

Attribute Name: interface-type-v6

Attribute Type: enum (l3vpn|evpn)

Attribute Name: interface-direction-v6

Attribute Type: enum (uplink|downlink)

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-vpn-links>

<ipv6-vpn-link>

<interface-type-v6>l3vpn</interface-type-v6>

<interface-type-v6>l3vpn</interface-type-v6>

<interface-direction-v6>uplink</interface-direction-v6>

</config>

</ipv6-vpn-link>

</ipv6-vpn-links>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay (uplink|downlink) (l3vpn|evpn)

Configure interface direction v6

DHCPv6 relay vpn interface type

This command is supported when following feature are enabled IPV6 feature

Attribute Name: interface-type-v6

Attribute Type: enum (l3vpn|evpn)

Attribute Name: interface-direction-v6

Attribute Type: enum (uplink|downlink)

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-vpn-links>

<ipv6-vpn-link>

<interface-type-v6>l3vpn</interface-type-v6>

<interface-type-v6>l3vpn</interface-type-v6>

<interface-direction-v6>uplink</interface-direction-v6>

</config>

</ipv6-vpn-link>

</ipv6-vpn-links>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay (uplink|downlink) (l3vpn|evpn)

Configure ip address

IPv4 address of the DHCP server

Attribute Name: ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-dhcp-servers>

<ipv4-dhcp-server>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

</ipv4-dhcp-server>

</ipv4-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay address A.B.C.D

Configure ipv4-dhcp-servers ip-address

IPv4 address of the DHCP server

Attribute Name: ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-dhcp-servers>

<ipv4-dhcp-server>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

</ipv4-dhcp-server>

</ipv4-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay address A.B.C.D

Configure dhcpv4 server global vrf

This attributes defines the VRF in which the DHCPv4 relay server is present

Attribute Name: dhcpv4-server-global-vrf

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-dhcp-servers>

<ipv4-dhcp-server>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

<dhcpv4-server-global-vrf>VRF-NAME</dhcpv4-server-global-vrf>

</ipv4-dhcp-server>

</ipv4-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay address A.B.C.D global (VRF-NAME|)

Configure ipv4-dhcp-server dhcpv4-server-global-vrf

This attributes defines the VRF in which the DHCPv4 relay server is present

Attribute Name: dhcpv4-server-global-vrf

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-dhcp-servers>

<ipv4-dhcp-server>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

<dhcpv4-server-global-vrf>VRF-NAME</dhcpv4-server-global-vrf>

</ipv4-dhcp-server>

</ipv4-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay address A.B.C.D global (VRF-NAME|)

Configure ipv4-dhcp-server ip-address

IPv4 address of the DHCP server

Attribute Name: ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv4-dhcp-servers>

<ipv4-dhcp-server>

<ip-address>A.B.C.D</ip-address>

<ip-address>A.B.C.D</ip-address>

</config>

</ipv4-dhcp-server>

</ipv4-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay address A.B.C.D ip dhcp relay address A.B.C.D

Configure ipv6 address

IPv6 address of the DHCP server

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-dhcp-servers>

<ipv6-dhcp-server>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

</ipv6-dhcp-server>

</ipv6-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay address X:X::X:X

Configure ipv6-dhcp-servers ipv6-address

IPv6 address of the DHCP server

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-dhcp-servers>

<ipv6-dhcp-server>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

</ipv6-dhcp-server>

</ipv6-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay address X:X::X:X

Configure dhcpv6 server global vrf

This attributes defines the VRF in which the DHCPv6 relay server is present

This command is supported when following feature are enabled IPV6 feature

Attribute Name: dhcpv6-server-global-vrf

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-dhcp-servers>

<ipv6-dhcp-server>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

<dhcpv6-server-global-vrf>VRF-NAME</dhcpv6-server-global-vrf>

</ipv6-dhcp-server>

</ipv6-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay address X:X::X:X global (VRF-NAME|)

Configure ipv6-dhcp-server dhcpv6-server-global-vrf

This attributes defines the VRF in which the DHCPv6 relay server is present

This command is supported when following feature are enabled IPV6 feature

Attribute Name: dhcpv6-server-global-vrf

Attribute Type: string

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-dhcp-servers>

<ipv6-dhcp-server>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

<dhcpv6-server-global-vrf>VRF-NAME</dhcpv6-server-global-vrf>

</ipv6-dhcp-server>

</ipv6-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay address X:X::X:X global (VRF-NAME|)

Configure ipv6-dhcp-server ipv6-address

IPv6 address of the DHCP server

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ipv6-dhcp-servers>

<ipv6-dhcp-server>

<ipv6-address>X:X::X:X</ipv6-address>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

</ipv6-dhcp-server>

</ipv6-dhcp-servers>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay address X:X::X:X ipv6 dhcp relay address X:X::X:X

Configure group name

IPv4 DHCP Relay group name

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcp-groups>

<dhcp-group>

<group-name>GROUP-NAME</group-name>

<group-name>WORD</group-name>

</config>

</dhcp-group>

</dhcp-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay server-group GROUP-NAME

Configure dhcp-groups group-name

IPv4 DHCP Relay group name

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcp-groups>

<dhcp-group>

<group-name>GROUP-NAME</group-name>

<group-name>WORD</group-name>

</config>

</dhcp-group>

</dhcp-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ip dhcp relay server-group GROUP-NAME

Configure server

IPv4 DHCP Relay Group server details

Attribute Name: server

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcp-groups>

<dhcp-group>

<group-name>GROUP-NAME</group-name>

<group-name>WORD</group-name>

</config>

</dhcp-group>

</dhcp-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

server A.B.C.D

Configure group6 name

IPv6 DHCP Relay group name

This command is supported when following feature are enabled IPV6 feature

Attribute Name: group6-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcpv6-groups>

<dhcpv6-group>

<group6-name>GROUP-NAME</group6-name>

<group6-name>WORD</group6-name>

</config>

</dhcpv6-group>

</dhcpv6-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay server-group GROUP-NAME

Configure dhcpv6-groups group6-name

IPv6 DHCP Relay group name

This command is supported when following feature are enabled IPV6 feature

Attribute Name: group6-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcpv6-groups>

<dhcpv6-group>

<group6-name>GROUP-NAME</group6-name>

<group6-name>WORD</group6-name>

</config>

</dhcpv6-group>

</dhcpv6-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

ipv6 dhcp relay server-group GROUP-NAME

Configure dhcpv6-group server

IPv6 DHCP Relay Group server details

This command is supported when following feature are enabled IPV6 feature

Attribute Name: server

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<relay>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<dhcpv6-groups>

<dhcpv6-group>

<group6-name>GROUP-NAME</group6-name>

<group6-name>WORD</group6-name>

</config>

</dhcpv6-group>

</dhcpv6-groups>

</vrf>

</vrfs>

</relay>

</dhcp>

Command Syntax

server X:X::X:X

clear ip dhcp relay statistics

Netconf RPC payload

<ipi-dhcp-relay_clear-relay-stats xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp"/>

Command Syntax

clear ip dhcp relay statistics

clear ip dhcp relay option statistics

Netconf RPC payload

<ipi-dhcp-relay_clear-relay-option-stats xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp"/>

Command Syntax

clear ip dhcp relay option statistics

clear ipv6 dhcp pd-route (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<ipi-dhcp-relay_clear-dhcpv6-pd-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">

<vrf-name>NAME</vrf-name>

</ipi-dhcp-relay_clear-dhcpv6-pd-route>

Command Syntax

clear ipv6 dhcp pd-route (vrf NAME|)

IPI-DNS-RELAY

Configure enable dns feature

Use this attribute to enable the DNS relay agent feature.

Attribute Name: enable-dns-feature

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dns-feature>true</enable-dns-feature>

</config>

</dns-relay>

Command Syntax

feature dns relay

Configure dns-relay enable-dns-feature

Use this attribute to enable the DNS relay agent feature.

Attribute Name: enable-dns-feature

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dns-feature>true</enable-dns-feature>

</config>

</dns-relay>

Command Syntax

no feature dns relay

Configure enable dnsv4 relay

Use this attribute to enable the IPv4 DNS relay agent.

Attribute Name: enable-dnsv4-relay

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dnsv4-relay>true</enable-dnsv4-relay>

</config>

</dns-relay>

Command Syntax

ip dns relay

Configure dns-relay enable-dnsv4-relay

Use this attribute to enable the IPv4 DNS relay agent.

Attribute Name: enable-dnsv4-relay

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dnsv4-relay>true</enable-dnsv4-relay>

</config>

</dns-relay>

Command Syntax

no ip dns relay

Configure enable dnsv6 relay

Use this attribute to enable the IPv6 DNS relay agent.

Attribute Name: enable-dnsv6-relay

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dnsv6-relay>true</enable-dnsv6-relay>

</config>

</dns-relay>

Command Syntax

ipv6 dns relay

Configure dns-relay enable-dnsv6-relay

Use this attribute to enable the IPv6 DNS relay agent.

Attribute Name: enable-dnsv6-relay

Attribute Type: boolean

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<enable-dnsv6-relay>true</enable-dnsv6-relay>

</config>

</dns-relay>

Command Syntax

no ipv6 dns relay

Configure dns server v4 addr

Use this attribute to set the IPv4 address

Attribute Name: dns-server-v4-addr

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<dns-server-v4-addr>A.B.C.D</dns-server-v4-addr>

</config>

</dns-relay>

Command Syntax

ip dns relay address A.B.C.D

Configure dns server v6 addr

Use this attribute to set the IPv6 address

Attribute Name: dns-server-v6-addr

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<dns-server-v6-addr>X:X::X:X</dns-server-v6-addr>

</config>

</dns-relay>

Command Syntax

ipv6 dns relay address X:X::X:X

Configure name

Use this attribute to enable the IPv4 DNS relay agent.

Attribute Name: enable-dnsv4-relay

Attribute Type: empty

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

</config>

</enable-dnsv4-relay>

</interface>

</interfaces>

</dns-relay>

Command Syntax

ip dns relay

Configure interface enable-dnsv6-relay

Use this attribute to enable the IPv6 DNS relay agent.

Attribute Name: enable-dnsv6-relay

Attribute Type: empty

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

</config>

</enable-dnsv6-relay>

</interface>

</interfaces>

</dns-relay>

Command Syntax

ipv6 dns relay

Configure dns relay uplink

Use this attribute to set the uplink IPv4 DNS relay agent.

Attribute Name: dns-relay-uplink

Attribute Type: empty

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

</config>

</dns-relay-uplink>

</interface>

</interfaces>

</dns-relay>

Command Syntax

ip dns relay uplink

Configure dns relay v6 uplink

Use this attribute to set the uplink IPv6 DNS relay agent.

Attribute Name: dns-relay-v6-uplink

Attribute Type: empty

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

</config>

</dns-relay-v6-uplink>

</interface>

</interfaces>

</dns-relay>

Command Syntax

ipv6 dns relay uplink

Configure vrf name

Use this attribute to set the IPv4 address

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: dns-server-v4-addr

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dns-server-v4-addr>A.B.C.D</dns-server-v4-addr>

</vrf>

</vrfs>

</dns-relay>

Command Syntax

ip dns relay address A.B.C.D

Configure vrf dns-server-v6-addr

Use this attribute to set the IPv4 address

This command is supported when following feature are enabled Virtual routing and forwarding

Attribute Name: dns-server-v6-addr

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<dns-relay xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-relay">

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dns-server-v6-addr>X:X::X:X</dns-server-v6-addr>

</vrf>

</vrfs>

</dns-relay>

Command Syntax

ipv6 dns relay address X:X::X:X

IPI-DNS-CLIENT

Configure default domain name

Default domain name used to complete unqualified host names (names without a dotted-decimal domain name).

Attribute Name: default-domain-name

Attribute Type: inet:domain-name

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<default-domain-name>DOMAIN-NAME</default-domain-name>

</vrf>

</vrfs>

</dns>

Command Syntax

ip domain-name (vrf (NAME|management)|) DOMAIN-NAME

Configure vrf name

VRF name associated with this instance.

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: lookup-enabled

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</lookup-enabled>

</config>

</vrf>

</vrfs>

</dns>

Command Syntax

ip domain-lookup (vrf (NAME|management)|)

Configure address

Name server address used for name resolution.

Attribute Name: address

Attribute Type: inet:ip-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</config>

</server>

</servers>

</vrf>

</vrfs>

</dns>

Command Syntax

ip name-server (vrf (NAME|management)|) (A.B.C.D|X:X::X:X)

Configure domain name

Use this attribute to define a list of default domain names used to complete unqualified host names. Each domain in the list is to be tried in turn. The ip domain-list command is similar to the ip domain-name command, except that with the ip domain-list command you can define a list of domains, each to be tried in turn.If there is no domain list, the default domain name specified with the ip domain-name command is used. If there is a domain list, the default domain name is not used.

Attribute Name: domain-name

Attribute Type: inet:domain-name

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<search-domains>

<search-domain>

<domain-name>DOMAIN-NAME</domain-name>

<domain-name>CML_DOMAIN_NAME_T</domain-name>

</config>

</search-domain>

</search-domains>

</vrf>

</vrfs>

</dns>

Command Syntax

ip domain-list (vrf (NAME|management)|) DOMAIN-NAME

Configure ipv6 address

Configure a static hostname-to-address IPv6 mapping in DNS.

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Attribute Name: ipv4-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host-entries>

<host-entry>

<hostname>HOSTNAME</hostname>

<ipv4-address>A.B.C.D</ipv4-address>

</config>

<ipv6-address>X:X::X:X</ipv6-address>

</host-entry>

</host-entries>

</vrf>

</vrfs>

</dns>

Command Syntax

ip host (vrf (NAME|management)|) HOSTNAME A.B.C.D X:X::X:X

Configure ipv4 address

Configure a static hostname-to-address IPv4 mapping in DNS.

Attribute Name: ipv4-address

Attribute Type: inet:ipv4-address

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host-entries>

<host-entry>

<hostname>HOSTNAME</hostname>

<ipv6-address>X:X::X:X</ipv6-address>

</config>

<ipv4-address>A.B.C.D</ipv4-address>

</host-entry>

</host-entries>

</vrf>

</vrfs>

</dns>

Command Syntax

ip host (vrf (NAME|management)|) HOSTNAME X:X::X:X A.B.C.D

Configure hostname

Configure a static hostname-to-address IPv4 mapping in DNS.

Attribute Name: ipv4-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host-entries>

<host-entry>

<hostname>HOSTNAME</hostname>

</config>

<ipv4-address>A.B.C.D</ipv4-address>

</host-entry>

</host-entries>

</vrf>

</vrfs>

</dns>

Command Syntax

ip host (vrf (NAME|management)|) HOSTNAME A.B.C.D

Configure host-entry ipv6-address

Configure a static hostname-to-address IPv6 mapping in DNS.

Attribute Name: ipv6-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host-entries>

<host-entry>

<hostname>HOSTNAME</hostname>

</config>

<ipv6-address>X:X::X:X</ipv6-address>

</host-entry>

</host-entries>

</vrf>

</vrfs>

</dns>

Command Syntax

ip host (vrf (NAME|management)|) HOSTNAME X:X::X:X

Configure enable

DNS client debug.

Attribute Name: enable

Attribute Type: uint8

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</dns>

Command Syntax

debug dns client

Configure disable default instance

Use this attribute to prevent default DNS config from being enabled at start up

Attribute Name: disable-default-instance

Attribute Type: empty

Netconf edit-config payload

<default-instance>

</disable-default-instance>

</config>

</default-instance>

</dns>

Command Syntax

ip domain-lookup disable-default

debug dns client

Netconf RPC payload

<dns-client-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-client"/>

Command Syntax

debug dns client

no debug dns client

Netconf RPC payload

<dns-client-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dns-client"/>

Command Syntax

no debug dns client

IPI-DHCP-CLIENT

Configure request ipv4 dns

Use this attribute to to add an option to a DHCP request.

Attribute Name: request-ipv4-dns

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv4-dns>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ip dhcp client request dns-nameserver

Configure request log server

Use this attribute to to add an option to a DHCP request.

Attribute Name: request-log-server

Attribute Type: empty

Netconf edit-config payload

</config>

</request-log-server>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ip dhcp client request log-server

Configure request host name

Use this attribute to to add an option to a DHCP request.

Attribute Name: request-host-name

Attribute Type: empty

Netconf edit-config payload

</config>

</request-host-name>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ip dhcp client request host-name

Configure request ntp server

Use this attribute to to add an option to a DHCP request.

Attribute Name: request-ntp-server

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ntp-server>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ip dhcp client request ntp-server

Configure request ipv6 dns

Use this attribute to to add an option to a DHCP request.

Attribute Name: request-ipv6-dns

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv6-dns>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client request dns-nameserver

Configure request ipv6 domain list

Use this attribute to specifies a search list of Domain Names to be used by the client to locate not-fully-qualified domain names.

Attribute Name: request-ipv6-domain-list

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv6-domain-list>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client request domain-search

Configure request ipv6 ntp server

Use this attribute to specifies a list of local NTP servers available for the client to synchronize their clocks.

Attribute Name: request-ipv6-ntp-server

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv6-ntp-server>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client request ntp-server

Configure request ipv6 rapid commit

Use this attribute to indicate the clients to enter into rapid-commit with the server.

Attribute Name: request-ipv6-rapid-commit

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv6-rapid-commit>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client request rapid-commit

Configure request ipv6 vendor opts

Use this attribute to specify a 32-bit Enterprise-ID number.

Attribute Name: request-ipv6-vendor-opts

Attribute Type: empty

Netconf edit-config payload

</config>

</request-ipv6-vendor-opts>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client request vendor-specific-information

Configure ipv6 information request

Use this attribute to get only stateless configuration parameters (i.e., without address).

Attribute Name: ipv6-information-request

Attribute Type: empty

Netconf edit-config payload

</config>

</ipv6-information-request>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client information-request

Configure ipv6 dad wait time

Use this attribute to Specify maximum time (in seconds) that the client should wait for the duplicate address detection (DAD) to complete on an interface.

Attribute Name: ipv6-dad-wait-time

Attribute Type: uint16

Attribute Range: 1-600

Netconf edit-config payload

</config>

<ipv6-dad-wait-time>1</ipv6-dad-wait-time>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client dad-wait-time <1-600>

Configure ipv6 client duid type

Use this attribute to configure duid type(ll or llt).

Attribute Name: ipv6-client-duid-type

Attribute Type: enum (ll|llt)

Netconf edit-config payload

</config>

<ipv6-client-duid-type>ll</ipv6-client-duid-type>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client duid (ll|llt)

Configure ipv6 max delegated prefix

Use this attribute to configure the maximum number of simultaneous prefixes delegated to a single client

Attribute Name: ipv6-max-delegated-prefix

Attribute Type: uint16

Attribute Range: 1-64

Netconf edit-config payload

</config>

<ipv6-max-delegated-prefix>1</ipv6-max-delegated-prefix>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp client max-delegated-prefixes <1-64>

Configure request ipv6 prefix

Use this attribute to add an option to a DHCP request.

Attribute Name: request-ipv6-prefix

Attribute Type: string

Netconf edit-config payload

</config>

<request-ipv6-prefix>PREFIX-NAME</request-ipv6-prefix>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 dhcp prefix-delegation PREFIX-NAME

Configure suffix ipv6 addr

This attribute points to IPv6 address

This command is supported when following feature are enabled IPV6 feature

Attribute Name: suffix-ipv6-addr

Attribute Type: string

Netconf edit-config payload

</config>

<prefix-ipv6-addresses>

<prefix-ipv6-address>

<suffix-ipv6-addr>X:X::X:X/M</suffix-ipv6-addr>

<suffix-ipv6-addr>X:X::X:X/M</suffix-ipv6-addr>

<prefix-name>PREFIX-NAME</prefix-name>

</config>

<prefix-name>PREFIX-NAME</prefix-name>

</prefix-ipv6-address>

</prefix-ipv6-addresses>

</interface>

</interfaces>

</client>

</dhcp>

Command Syntax

ipv6 address PREFIX-NAME X:X::X:X/M

IPI-DHCP-SERVER

Configure enable ipv4 server

Interface on which IPv4 DHCP Server has to be run

Attribute Name: enable-ipv4-server

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-ipv4-server>

</interface>

</interfaces>

</server>

</dhcp>

Command Syntax

ip dhcp server

Configure enable ipv6 server

Interface on which IPv6 DHCP Server has to be run

Attribute Name: enable-ipv6-server

Attribute Type: empty

Netconf edit-config payload

</config>

</enable-ipv6-server>

</interface>

</interfaces>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server

Configure max lease time

Maximum length in seconds that will be assigned to a lease.If not defined, the default maximum lease time is 86400.

Attribute Name: max-lease-time

Attribute Type: int32

Default Value: 86400

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<max-lease-time>SECONDS</max-lease-time>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server max-lease-time SECONDS

Configure default lease time

Length in seconds that will be assigned to a lease if the client requesting the lease does not ask for a specific expiration time. The default is 86400

Attribute Name: default-lease-time

Attribute Type: int32

Default Value: 86400

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<default-lease-time>SECONDS</default-lease-time>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server default-lease-time SECONDS

Configure rapid commit

Option enables the DHCP Client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).

Attribute Name: rapid-commit

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</rapid-commit>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server rapid-commit

Configure preference

Use this to configure preference option in dhcp server.

Attribute Name: preference

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</preference>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server preference

Configure vrf name

Option enables the DHCP Client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).

Attribute Name: rapid-commit

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</rapid-commit>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server rapid-commit

Configure vrf preference

Use this to configure preference option in dhcp server.

Attribute Name: preference

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</preference>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server preference

Configure vrf max-lease-time

Maximum length in seconds that will be assigned to a lease.If not defined, the default maximum lease time is 86400.

Attribute Name: max-lease-time

Attribute Type: int32

Default Value: 86400

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<max-lease-time>SECONDS</max-lease-time>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server max-lease-time SECONDS

Configure vrf default-lease-time

Length in seconds that will be assigned to a lease if the client requesting the lease does not ask for a specific expiration time. The default is 86400

Attribute Name: default-lease-time

Attribute Type: int32

Default Value: 86400

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<default-lease-time>SECONDS</default-lease-time>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server default-lease-time SECONDS

Configure pool name

IPv4 DHCP Server address pool name

Attribute Name: pool-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server pool NAME

Configure dhcp-pools pool-name

IPv4 DHCP Server address pool name

Attribute Name: pool-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ip dhcp server pool NAME

Configure host name

IPv4 DHCP Server option to provide hostname details to a DHCP client

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<host-name>NAME</host-name>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

host-name NAME

Configure routers

IPv4 DHCP Server option to provide routers details to a DHCP client

Attribute Name: routers

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

routers A.B.C.D

Configure ntp server

IPv4 DHCP Server option to provide ntp-server details to a DHCP client

Attribute Name: ntp-server

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<ntp-server>A.B.C.D</ntp-server>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ntp-server A.B.C.D

Configure boot file

IPv4 DHCP Server option to provide boot-file details to a DHCP client

Attribute Name: boot-file

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<boot-file>BOOTFILE</boot-file>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

boot-file BOOTFILE

Configure tftp server

IPv4 DHCP Server option to provide tftp-server details to a DHCP client

Attribute Name: tftp-server

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<tftp-server>A.B.C.D</tftp-server>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

tftp-server A.B.C.D

Configure log server

IPv4 DHCP Server option to provide log-server details to a DHCP client

Attribute Name: log-server

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<log-server>A.B.C.D</log-server>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

log-server A.B.C.D

Configure dns server

IPv4 DHCP Server option to provide dns name-server details to a DHCP client

Attribute Name: dns-server

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

<dns-server>A.B.C.D</dns-server>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

dns-server A.B.C.D

Configure netmask

Mask part of the subnet that will be used to assign IPv4 addresses to hosts

Attribute Name: netmask

Attribute Type: inet:ipv4-address

Attribute Name: network

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

</config>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

network A.B.C.D netmask A.B.C.D

Configure high address in range

Specifies the high range of the IPv4 addresses that the DHCP server should assign to DHCP clients.

Attribute Name: high-address-in-range

Attribute Type: inet:ipv4-address

Attribute Name: low-address-in-range

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp-pools>

<dhcp-pool>

<pool-name>NAME</pool-name>

<pool-name>WORD</pool-name>

<low-address-in-range>A.B.C.D</low-address-in-range>

</config>

<high-address-in-range>A.B.C.D</high-address-in-range>

</dhcp-pool>

</dhcp-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

address range low-address A.B.C.D (high-address A.B.C.D|)

Configure pool6 name

IPv6 DHCP Server address pool name

This command is supported when following feature are enabled IPV6 feature

Attribute Name: pool6-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server pool NAME

Configure dhcp6-pools pool6-name

IPv6 DHCP Server address pool name

This command is supported when following feature are enabled IPV6 feature

Attribute Name: pool6-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ipv6 dhcp server pool NAME

Configure domain name

IPv6 DHCP Server option to provide domain-name details to a DHCP client

This command is supported when following feature are enabled IPV6 feature

Attribute Name: domain-name

Attribute Type: string

Attribute Range: 1-63

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

<domain-name>NAME</domain-name>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

domain-name NAME

Configure vendor options

IPv6 DHCP Server option to provide vendor details to a DHCP client

This command is supported when following feature are enabled IPV6 feature

Attribute Name: vendor-options

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

<vendor-options>VENDOR-OPTS</vendor-options>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

vendor-options VENDOR-OPTS

Configure dhcp6-pool ntp-server

IPv6 DHCP Server option to provide ntp-server details to a DHCP client

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ntp-server

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

<ntp-server>X:X::X:X</ntp-server>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

ntp-server X:X::X:X

Configure dhcp6-pool dns-server

IPv6 DHCP Server option to provide dns name-server details to a DHCP client

This command is supported when following feature are enabled IPV6 feature

Attribute Name: dns-server

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

<dns-server>X:X::X:X</dns-server>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

dns-server X:X::X:X

Configure ipv6 netmask

Mask part of the subnet that will be used to assign IPv6 addresses to hosts

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-netmask

Attribute Type: uint8

Attribute Range: 1-128

Attribute Name: ipv6-network

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

<ipv6-network>X:X::X:X</ipv6-network>

</config>

<ipv6-netmask>1</ipv6-netmask>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

network X:X::X:X netmask <1-128>

Configure low address in range

Specifies the high range of the IPv6 addresses that the DHCP server should assign to DHCP clients.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: high-address-in-range

Attribute Type: inet:ipv6-address

Attribute Name: low-address-in-range

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

<low-address-in-range>X:X::X:X</low-address-in-range>

</config>

<high-address-in-range>X:X::X:X</high-address-in-range>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

address range low-address X:X::X:X (high-address X:X::X:X|)

Configure temporary address

Specifies the temporary IPv6 address that the DHCP server should assign to DHCP clients.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: temporary-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

</config>

<temporary-address>X:X::X:X</temporary-address>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

temporary address X:X::X:X

Configure ipv6 prefix netmask

Mask part of the ipv6 Prefix used for Prefix delegation

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-prefix-netmask

Attribute Type: uint8

Attribute Range: 1-128

Attribute Name: ipv6-prefix-high-address

Attribute Type: inet:ipv6-address

Attribute Name: ipv6-prefix-low-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<dhcp6-pools>

<dhcp6-pool>

<pool6-name>NAME</pool6-name>

<pool6-name>WORD</pool6-name>

<ipv6-prefix-high-address>X:X::X:X</ipv6-prefix-high-address>

<ipv6-prefix-low-address>X:X::X:X</ipv6-prefix-low-address>

</config>

<ipv6-prefix-netmask>1</ipv6-prefix-netmask>

</dhcp6-pool>

</dhcp6-pools>

</vrf>

</vrfs>

</server>

</dhcp>

Command Syntax

prefix high-range X:X::X:X low-range X:X::X:X netmask <1-128>

IPI-SFLOW

Configure enabled

Use this attribute to enable or disable Sampled Flow (sFlow) feature globally.

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<sflow>

</enabled>

</config>

</sflow>

</sampling>

Command Syntax

feature sflow

Configure source address

The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled,added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained.

Attribute Name: source-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<sflow>

<source-address>A.B.C.D</source-address>

</config>

</sflow>

</sampling>

Command Syntax

sflow agent-ip A.B.C.D

Configure cpu rate limit

CPU rate in packets per second

Attribute Name: cpu-rate-limit

Attribute Type: uint32

Attribute Range: 2000-100000

Netconf edit-config payload

<sflow>

<cpu-rate-limit>2000</cpu-rate-limit>

</config>

</sflow>

</sampling>

Command Syntax

sflow rate-limit <2000-100000>

Configure vrf name

The VRF name from which this collector is reachable.

Attribute Name: vrf-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: receiver-timeout

Attribute Type: uint32

Attribute Range: 0-2147483647

Attribute Name: max-datagram-size

Attribute Type: uint16

Attribute Range: 200-9000

Netconf edit-config payload

<sflow>

<collector-id>1</collector-id>

<collector-id>1</collector-id>

<receiver-timeout>0</receiver-timeout>

<max-datagram-size>200</max-datagram-size>

</config>

<vrf-name>WORD</vrf-name>

</collector>

</collectors>

</sflow>

</sampling>

Command Syntax

sflow (collector-id <1-5>|) collector A.B.C.D port <1024-65535> receiver-time-out <0-2147483647> max-datagram-size <200-9000> (vrf WORD|)

Configure max entries

Specifies the maximum number of log entries that are cached, default is 1000 entries

Attribute Name: max-entries

Attribute Type: uint16

Default Value: 1000

Attribute Range: 1000-10000

Netconf edit-config payload

<sflow>

<max-entries>1000</max-entries>

</config>

</logging>

</sflow>

</sampling>

Command Syntax

access-list logging cache-size <1000-10000>

Configure rate limit

Configures rate limits in packets per second, Default is 200 packets/sec

Attribute Name: rate-limit

Attribute Type: uint16

Default Value: 200

Attribute Range: 0-1000

Netconf edit-config payload

<sflow>

<rate-limit>0</rate-limit>

</config>

</logging>

</sflow>

</sampling>

Command Syntax

access-list logging rate-limit <0-1000>

Configure options

Set sFlow debug in config mode

Attribute Name: options

Attribute Type: bits (agent|sampling|polling|all)

Netconf edit-config payload

<sflow>

<debug>

<options>agent</options>

</config>

</debug>

</sflow>

</sampling>

Command Syntax

debug sflow (agent|sampling|polling|all)

Configure polling interval

Configure global polling-interval for packet sampling. The sflow polling-interval configuration on interface overrides the global configuration.

Attribute Name: polling-interval

Attribute Type: uint8

Attribute Range: 5-60

Netconf edit-config payload

<sflow>

<polling-interval>5</polling-interval>

</config>

</global>

</sflow>

</sampling>

Command Syntax

sflow poll-interval <5-60>

Configure sampling direction

sflow sampling direction

Attribute Name: sampling-direction

Attribute Type: enum (ingress|egress)

Netconf edit-config payload

<sflow>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

</sampling>

</samplings>

</global>

</sflow>

</sampling>

Command Syntax

sflow direction (ingress|egress)

Configure rate

The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows.An agent should choose its own algorithm to introduce variance into the sampling so that exactly every Nth packet is not counted. A sampling rateof 1 counts all packets. A sampling rate of 0 disables sampling.The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling rate (again because of implementation considerations).When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value.When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows.

Attribute Name: rate

Attribute Type: uint32

Default Value: 16777215

Attribute Range: 1024-16777215

Netconf edit-config payload

<sflow>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

</sampling>

</samplings>

</global>

</sflow>

</sampling>

Command Syntax

sampling-rate <1024-16777215>

Configure max header size

Attribute Name: max-header-size

Attribute Type: uint16

Default Value: 16

Attribute Range: 16-256

Netconf edit-config payload

<sflow>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

<max-header-size>16</max-header-size>

</sampling>

</samplings>

</global>

</sflow>

</sampling>

Command Syntax

max-header-size <16-256>

clear access-list log-cache

Netconf RPC payload

<sflow-clear-access-list-log-cache xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sflow"/>

Command Syntax

clear access-list log-cache

debug sflow (agent|sampling|polling|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (agent|sampling|polling|all)

Netconf RPC payload

<sflow-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sflow">

<terminal-debug-options>agent</terminal-debug-options>

</sflow-terminal-debug-on>

Command Syntax

debug sflow (agent|sampling|polling|all)

no debug sflow (agent|sampling|polling|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (agent|sampling|polling|all)

Netconf RPC payload

<sflow-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sflow">

<terminal-debug-options>agent</terminal-debug-options>

</sflow-terminal-debug-off>

Command Syntax

no debug sflow (agent|sampling|polling|all)

IPI-SFLOW-INTERFACE

Configure enabled

To enable or disable sampling on an interface after giving the sflow sampling-rate command on the same interface, or it can use the global configuration for sampling and polling-interval on this interface.

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<sflow>

</config>

</enabled>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

sflow enable

Configure polling interval

The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling.The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval lets the agent designer set an upper bound on the overhead associated with polling, anda maximum interval may be the result of implementation restrictions (such as counter size).In addition notall values between the maximum and minimum may be realizable as the sampling interval (again because of implementation considerations).When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value.When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described).The sampling algorithm must converge so that over time the number of packets sampledapproaches 1/Nth of the total number of packets in the monitored flows.

Attribute Name: polling-interval

Attribute Type: uint8

Attribute Range: 5-60

Netconf edit-config payload

<sflow>

</config>

<polling-interval>5</polling-interval>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

sflow poll-interval <5-60>

Configure collector id

Add a collector id to the interface so that it can be used by sflow to send the data.

Attribute Name: collector-id

Attribute Type: uint8

Default Value: 1

Attribute Range: 1-5

Netconf edit-config payload

<sflow>

</config>

<collector-id>1</collector-id>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

sflow collector-id <1-5>

Configure sampling direction

sflow sampling direction

Attribute Name: sampling-direction

Attribute Type: enum (ingress|egress)

Netconf edit-config payload

<sflow>

</config>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

</sampling>

</samplings>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

sflow direction (ingress|egress)

Configure rate

Attribute Name: rate

Attribute Type: uint32

Default Value: 16777215

Attribute Range: 1024-16777215

Netconf edit-config payload

<sflow>

</config>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

</sampling>

</samplings>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

sampling-rate <1024-16777215>

Configure max header size

Attribute Name: max-header-size

Attribute Type: uint16

Default Value: 16

Attribute Range: 16-256

Netconf edit-config payload

<sflow>

</config>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

<max-header-size>16</max-header-size>

</sampling>

</samplings>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

max-header-size <16-256>

Configure disabled

This leaf is used to disable sampling on given direction, but it keeps the sFlow feature running on interface.

Attribute Name: disabled

Attribute Type: empty

Netconf edit-config payload

<sflow>

</config>

<sampling-direction>ingress</sampling-direction>

<sampling-direction>ingress</sampling-direction>

</config>

</disabled>

</sampling>

</samplings>

</interface>

</interfaces>

</sflow>

</sampling>

Command Syntax

disable

clear sflow statistics (interface IFNAME|)

Attribute Name: interface

Attribute Type: string

Netconf RPC payload

<sflow-clear-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sflow-interface">

<interface>IFNAME</interface>

</sflow-clear-statistics>

Command Syntax

clear sflow statistics (interface IFNAME|)

IPI-WATCHDOG

Configure watchdog disabled

Disable software watchdog functionality for all modules. This feature is enabled by default.

This command is supported when following feature are enabled Watchdog feature

Attribute Name: watchdog-disabled

Attribute Type: uint8

Netconf edit-config payload

</watchdog-disabled>

</config>

</watchdog>

Command Syntax

no feature software-watchdog

Configure keepalive interval

Software watchdog keep-alive time interval in seconds. Default value is 60 seconds.

This command is supported when following feature are enabled Watchdog feature

Attribute Name: keepalive-interval

Attribute Type: uint16

Default Value: 60

Attribute Range: 30-1800

Netconf edit-config payload

<keepalive-interval>30</keepalive-interval>

</config>

</watchdog>

Command Syntax

software-watchdog keep-alive-time <30-1800>

Configure module watchdog status disabled

Enable software watchdog functionality for a particular software module.

This command is supported when following feature are enabled Watchdog feature

Attribute Name: module-watchdog-status-disabled

Attribute Type: uint8

Netconf edit-config payload

<software-modules>

<software-module>

</config>

</module-watchdog-status-disabled>

</software-module>

</software-modules>

</watchdog>

Command Syntax

clear cores (WORD|)

Attribute Name: core-dump

Attribute Type: string

Netconf RPC payload

<clear-core-dump xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-watchdog">

<core-dump>WORD</core-dump>

</clear-core-dump>

Command Syntax

clear cores (WORD|)

sys-update un-install

Netconf RPC payload

<sys-update-uninstall xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update"/>

Command Syntax

sys-update un-install

sys-container (raon) (install|update) file FILENAME

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: upgrade-type

Attribute Type: enum (install|update)

Attribute Name: file

Attribute Type: string

Netconf RPC payload

<sys-container-install xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<upgrade-type>install</upgrade-type>

<file>FILENAME</file>

</sys-container-install>

Command Syntax

sys-container (raon) (install|update) file FILENAME

sys-container (raon) un-install

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: un-install

Attribute Type: boolean

Default Value: false

Netconf RPC payload

<sys-container-uninstall xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<un-install>true</un-install/>

</sys-container-uninstall>

Command Syntax

sys-container (raon) un-install

sys-container (raon) (start|stop|restart)

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: boot-type

Attribute Type: enum (start|stop|restart)

Netconf RPC payload

<sys-container-boot xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<boot-type>start</boot-type>

</sys-container-boot>

Command Syntax

sys-container (raon) (start|stop|restart)

sys-container (raon) get URL (source-interface IFNAME|)

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: url

Attribute Type: string

Attribute Name: source-interface

Attribute Type: string

Netconf RPC payload

<sys-container-get xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<source-interface>IFNAME</source-interface>

</sys-container-get>

Command Syntax

sys-container (raon) get URL (source-interface IFNAME|)

sys-container (raon) remove file FILENAME

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: file

Attribute Type: string

Netconf RPC payload

<sys-container-remove xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<file>FILENAME</file>

</sys-container-remove>

Command Syntax

sys-container (raon) remove file FILENAME

sys-container (raon) verify image FILEPATH signature FILEPATH

Attribute Name: type

Attribute Type: enum (raon)

Attribute Name: image

Attribute Type: string

Attribute Name: signature

Attribute Type: string

Netconf RPC payload

<sys-container-verify xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update">

<image>FILEPATH</image>

<signature>FILEPATH</signature>

</sys-container-verify>

Command Syntax

sys-container (raon) verify image FILEPATH signature FILEPATH

sys-container cancel download

Netconf RPC payload

<sys-container-cancel-download xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-sys-update"/>

Command Syntax

sys-container cancel download

IPI-MRIB-IPV4

Configure multicast routing enable

Use this attribute to turn on/off multicast routing on the router when turned off, the multicast protocol daemon remains present, but does not perform multicast functions. When multicast routing is enabled, the MRIB re-creates tunnels, and starts processing any VIF addition/deletion requests, MRT addition/deletion requests, and any multicast forwarding events.

Attribute Name: multicast-routing-enable

Attribute Type: uint8

Netconf edit-config payload

<ipv4>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</multicast-routing-enable>

</vrf>

</vrfs>

</ipv4>

</mrib>

Command Syntax

ip multicast-routing (vrf WORD|)

Configure maximum routes

Use this attribute to limit the number of multicast routes that can be added to a multicast routing table. It generates an error message when the limit is exceeded.

Attribute Name: maximum-routes

Attribute Type: uint32

Attribute Range: 1-2147483647

Netconf edit-config payload

<ipv4>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<route-limit>

<maximum-routes>1</maximum-routes>

</config>

</route-limit>

</vrf>

</vrfs>

</ipv4>

</mrib>

Command Syntax

ip multicast (vrf WORD|) route-limit <1-2147483647>

Configure warning threshold

Use this attribute to limit the number of multicast routes that can be added to a multicast routing table. It generates an error message when the limit is exceeded. If the threshold parameter is set, a threshold warning message is generated when this threshold is exceeded and the message continues to occur until the number of mroutes reaches the limit set by the limit argument.

Attribute Name: warning-threshold

Attribute Type: uint32

Attribute Range: 1-2147483647

Attribute Name: maximum-routes

Attribute Type: uint32

Attribute Range: 1-2147483647

Netconf edit-config payload

<ipv4>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<route-limit>

<maximum-routes>1</maximum-routes>

<warning-threshold>1</warning-threshold>

</config>

</route-limit>

</vrf>

</vrfs>

</ipv4>

</mrib>

Command Syntax

ip multicast (vrf WORD|) route-limit <1-2147483647> <1-2147483647>

Configure options

Use this attribute to specify debug options

Attribute Name: options

Netconf edit-config payload

<ipv4>

<vrfs>

<vrf>

<vrf-name>WORD</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<debug>

</config>

</debug>

</vrf>

</vrfs>

</ipv4>

</mrib>

Command Syntax

Configure ttl threshold

Use this attribute to configure the time-to-live (TTL) threshold of packets being forwarded out of an interface. Only multicast packets with a TTL value greater than the threshold are forwarded out of the interface.

Attribute Name: ttl-threshold

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<ipv4>

</config>

<ttl-threshold>1</ttl-threshold>

</interface>

</interfaces>

</ipv4>

</mrib>

Command Syntax

ip multicast ttl-threshold <1-255>

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>WORD</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-mrib-ipv4_mrib-ipv4-terminal-debug-on>

Command Syntax

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>WORD</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-mrib-ipv4_mrib-ipv4-terminal-debug-off>

Command Syntax

clear ip mroute (vrf NAME|) *

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: all-routes

Attribute Type: empty

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<all-routes>CML_EMPTY_T</all-routes>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-all>

Command Syntax

clear ip mroute (vrf NAME|) *

clear ip mroute (vrf NAME|) A.B.C.D

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-group>

Command Syntax

clear ip mroute (vrf NAME|) A.B.C.D

clear ip mroute (vrf NAME|) A.B.C.D A.B.C.D

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: source-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

<source-address>A.B.C.D</source-address>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-source-group>

Command Syntax

clear ip mroute (vrf NAME|) A.B.C.D A.B.C.D

clear ip mroute (vrf NAME|) statistics *

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: all-routes

Attribute Type: empty

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<all-routes>CML_EMPTY_T</all-routes>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-all>

Command Syntax

clear ip mroute (vrf NAME|) statistics *

clear ip mroute (vrf NAME|) statistics A.B.C.D

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-group>

Command Syntax

clear ip mroute (vrf NAME|) statistics A.B.C.D

clear ip mroute (vrf NAME|) statistics A.B.C.D A.B.C.D

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: source-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

<source-address>A.B.C.D</source-address>

</ipi-mrib-ipv4_mrib-ipv4-clear-mroute-statistics-source-group>

Command Syntax

clear ip mroute (vrf NAME|) statistics A.B.C.D A.B.C.D

snmp restart mrib

Netconf RPC payload

<ipi-mrib-ipv4_mrib-ipv4-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib"/>

Command Syntax

snmp restart mrib

IPI-MRIB-IPV6

Configure multicast routing enable

Attribute Name: multicast-routing-enable

Attribute Type: uint8

Netconf edit-config payload

<ipv6>

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</multicast-routing-enable>

</vrf>

</vrfs>

</ipv6>

</mrib>

Command Syntax

ipv6 multicast-routing (vrf NAME|)

Configure maximum routes

Use this attribute to limit the number of multicast routes that can be added to a multicast routing table. It generates an error message when the limit is exceeded.

Attribute Name: maximum-routes

Attribute Type: uint32

Attribute Range: 1-2147483647

Netconf edit-config payload

<ipv6>

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<route-limit>

<maximum-routes>1</maximum-routes>

</config>

</route-limit>

</vrf>

</vrfs>

</ipv6>

</mrib>

Command Syntax

ipv6 multicast (vrf NAME|) route-limit <1-2147483647>

Configure warning threshold

Attribute Name: warning-threshold

Attribute Type: uint32

Attribute Range: 1-2147483647

Attribute Name: maximum-routes

Attribute Type: uint32

Attribute Range: 1-2147483647

Netconf edit-config payload

<ipv6>

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<route-limit>

<maximum-routes>1</maximum-routes>

<warning-threshold>1</warning-threshold>

</config>

</route-limit>

</vrf>

</vrfs>

</ipv6>

</mrib>

Command Syntax

ipv6 multicast (vrf NAME|) route-limit <1-2147483647> <1-2147483647>

Configure options

Use this attribute to specify debug options

Attribute Name: options

Netconf edit-config payload

<ipv6>

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<debug>

</config>

</debug>

</vrf>

</vrfs>

</ipv6>

</mrib>

Command Syntax

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>WORD</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-mrib-ipv6_mrib-ipv6-terminal-debug-on>

Command Syntax

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: terminal-debug-options

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>WORD</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</ipi-mrib-ipv6_mrib-ipv6-terminal-debug-off>

Command Syntax

clear ipv6 mroute (vrf NAME|) *

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: all-routes

Attribute Type: empty

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<all-routes>CML_EMPTY_T</all-routes>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-all>

Command Syntax

clear ipv6 mroute (vrf NAME|) *

clear ipv6 mroute (vrf NAME|) X:X::X:X

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-group>

Command Syntax

clear ipv6 mroute (vrf NAME|) X:X::X:X

clear ipv6 mroute (vrf NAME|) X:X::X:X X:X::X:X

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Attribute Name: source-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

<source-address>X:X::X:X</source-address>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-source-group>

Command Syntax

clear ipv6 mroute (vrf NAME|) X:X::X:X X:X::X:X

clear ipv6 mroute (vrf NAME|) statistics *

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: all-routes

Attribute Type: empty

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<all-routes>CML_EMPTY_T</all-routes>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-all>

Command Syntax

clear ipv6 mroute (vrf NAME|) statistics *

clear ipv6 mroute (vrf NAME|) statistics X:X::X:X

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-group>

Command Syntax

clear ipv6 mroute (vrf NAME|) statistics X:X::X:X

clear ipv6 mroute (vrf NAME|) statistics X:X::X:X X:X::X:X

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Attribute Name: source-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-source-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mrib">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

<source-address>X:X::X:X</source-address>

</ipi-mrib-ipv6_mrib-ipv6-clear-mroute-statistics-source-group>

Command Syntax

clear ipv6 mroute (vrf NAME|) statistics X:X::X:X X:X::X:X

IPI-IGMP

Configure disable ssm map

Use this attribute to enable the IGMP operation on an interface. This command enables IGMP operation in standalone mode, and can be used to learn local-membership information prior to enabling a multicast routing protocol on the interface. This command will has no effect on interfaces configured for IGMP proxy.

Attribute Name: disable-ssm-map

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</disable-ssm-map>

</vrf>

</vrfs>

</igmp>

Command Syntax

no ip igmp (vrf NAME|) ssm-map enable

Configure disable tos check

Use this attribute to disable TOS check for Internetwork Control

Attribute Name: disable-tos-check

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</disable-tos-check>

</vrf>

</vrfs>

</igmp>

Command Syntax

no ip igmp (vrf NAME|) tos-check

Configure limit exception acl

Use this attribute to set the maximum number of group membership states, at either the router level or at the interface level. Once the specified number of group memberships is reached, all further local-memberships are ignored. Optionally, an exception access-list can be configured to specify the group-address(es) to be excluded from being subject to the limit. This command applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy. The limit applies, individually, to each of its constituent interfaces.

Attribute Name: limit-exception-acl

Attribute Type: string

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<group-membership-control>

<member-limit>1</member-limit>

<limit-exception-acl>WORD</limit-exception-acl>

</config>

</group-membership-control>

</vrf>

</vrfs>

</igmp>

Command Syntax

ip igmp (vrf NAME|) limit <1-2097152> (except WORD|)

Configure member limit

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<group-membership-control>

<member-limit>1</member-limit>

</config>

</group-membership-control>

</vrf>

</vrfs>

</igmp>

Command Syntax

ip igmp (vrf NAME|) limit <1-2097152>

Configure source

Use this attribute to specify the static mode of defining SSM mapping. SSM mapping statically assigns sources to IGMPv1 and IGMPv2 groups to translate such (star G) groups memberships to (S,G) memberships for use with PIMSSM.This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: source

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ssm>

<static-mappings>

<static-mapping>

<group-ranges-acl>WORD</group-ranges-acl>

</config>

<group-ranges-acl>WORD</group-ranges-acl>

</static-mapping>

</static-mappings>

</ssm>

</vrf>

</vrfs>

</igmp>

Command Syntax

ip igmp (vrf NAME|) ssm-map static WORD A.B.C.D

Configure options

Use this attribute to enable igmp debugging configurations

Attribute Name: options

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<debug>

</config>

</debug>

</vrf>

</vrfs>

</igmp>

Command Syntax

debug ip igmp (vrf NAME|) (all|decode|encode|events|fsm|tib)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: terminal-debug-options

Netconf RPC payload

<igmp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</igmp-terminal-debug-on>

Command Syntax

debug ip igmp (vrf NAME|) (all|decode|encode|events|fsm|tib)

no debug ip igmp (vrf NAME|) (all|decode|encode|events|fsm|tib)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: terminal-debug-options

Netconf RPC payload

<igmp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<terminal-debug-options>all</terminal-debug-options>

</igmp-terminal-debug-off>

Command Syntax

no debug ip igmp (vrf NAME|) (all|decode|encode|events|fsm|tib)

clear ip igmp (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<igmp-clear-all-groups-for-vrf xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

</igmp-clear-all-groups-for-vrf>

Command Syntax

clear ip igmp (vrf NAME|)

clear ip igmp (vrf NAME|) group *

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: clear-all

Attribute Type: empty

Netconf RPC payload

<igmp-clear-all-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<clear-all>CML_EMPTY_T</clear-all>

</igmp-clear-all-groups>

Command Syntax

clear ip igmp (vrf NAME|) group *

clear ip igmp (vrf NAME|) group A.B.C.D IFNAME

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<igmp-clear-group-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

<if-name>IFNAME</if-name>

</igmp-clear-group-on-interface>

Command Syntax

clear ip igmp (vrf NAME|) group A.B.C.D IFNAME

clear ip igmp (vrf NAME|) interface IFNAME

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<igmp-clear-all-groups-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<if-name>IFNAME</if-name>

</igmp-clear-all-groups-on-interface>

Command Syntax

clear ip igmp (vrf NAME|) interface IFNAME

clear ip igmp (vrf NAME|) group A.B.C.D

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<igmp-clear-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp">

<vrf-name>NAME</vrf-name>

<group-address>A.B.C.D</group-address>

</igmp-clear-group>

Command Syntax

clear ip igmp (vrf NAME|) group A.B.C.D

IPI-IGMP-INTERFACE

Configure enabled

Use this attribute to enable the IGMP operation on an interface. This attributeenables IGMP operation in standalone mode, and can be used to learn local-membership information prior to enabling a multicast routing protocol on the interface. This attribute will have no effect on interfaces configured for IGMP proxy

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

</config>

</enabled>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp

Configure last member query count

Use this attribute to set the last-member query-count value. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: last-member-query-count

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-7

Netconf edit-config payload

</config>

<last-member-query-count>2</last-member-query-count>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp last-member-query-count <2-7>

Configure last member query interval

Use this attribute to configure the frequency at which the router sends IGMP group-specific host query messages. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: last-member-query-interval

Attribute Type: uint16

Default Value: 1000

Attribute Range: 1000-25500

Netconf edit-config payload

</config>

<last-member-query-interval>1000</last-member-query-interval>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp last-member-query-interval <1000-25500>

Configure querier timeout

Use this attribute to set the timeout period before the router takes over as the querier for the interface after the previous querier has stopped querying. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: querier-timeout

Attribute Type: uint16

Default Value: 255

Attribute Range: 60-300

Netconf edit-config payload

</config>

<querier-timeout>60</querier-timeout>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp querier-timeout <60-300>

Configure query interval

Use this attribute to set the frequency of sending IGMP host query messages. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: query-interval

Attribute Type: uint16

Default Value: 125

Attribute Range: 1-18000

Netconf edit-config payload

</config>

<query-interval>1</query-interval>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp query-interval <1-18000>

Configure query max response time

Use this attribute to set the maximum response time advertised in IGMP queries. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: query-max-response-time

Attribute Type: uint8

Default Value: 10

Attribute Range: 1-240

Netconf edit-config payload

</config>

<query-max-response-time>1</query-max-response-time>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp query-max-response-time <1-240>

Configure startup query interval

Use this attribute to set a query interval value for IGMP

Attribute Name: startup-query-interval

Attribute Type: uint16

Default Value: 31

Attribute Range: 1-18000

Netconf edit-config payload

</config>

<startup-query-interval>1</startup-query-interval>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp startup-query-interval <1-18000>

Configure startup query count

Use this attribute to set a startup query count for IGMP

Attribute Name: startup-query-count

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-10

Netconf edit-config payload

</config>

<startup-query-count>2</startup-query-count>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp startup-query-count <2-10>

Configure robustness variable

Use this attribute to set the robustness variable value on an interface. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: robustness-variable

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-7

Netconf edit-config payload

</config>

<robustness-variable>2</robustness-variable>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp robustness-variable <2-7>

Configure version

Use this attribute to set the current IGMP protocol version on an interface. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.

Attribute Name: version

Attribute Type: uint8

Default Value: 3

Attribute Range: 1-3

Netconf edit-config payload

</config>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp version <1-3>

Configure require router alert option

Use this attribute to configure strict Router Advertisement validation for IGMP.

Attribute Name: require-router-alert-option

Attribute Type: empty

Netconf edit-config payload

</config>

</require-router-alert-option>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp ra-option

Configure allow offlink host

Use this attribute to configure off-link for IGMP.

Attribute Name: allow-offlink-host

Attribute Type: empty

Netconf edit-config payload

</config>

</allow-offlink-host>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp offlink

Configure enable proxy service

Use this attribute to designate an interface to be the IGMP proxy-service (upstream host-side) interface, thus enabling IGMP host-side protocol operation on this interface. All associated downstream router-side interfaces will have their memberships consolidated on this interface, according to IGMP host-side functionality

Attribute Name: enable-proxy-service

Attribute Type: empty

Netconf edit-config payload

</config>

<proxy>

</enable-proxy-service>

</config>

</proxy>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp proxy-service

Configure mroute proxy interface

Use this attribute to specify the IGMP Proxy service interface with which to be associated. IGMP router-side protocol operation is enabled only when the specified upstream proxy-service interface is functional.

Attribute Name: mroute-proxy-interface

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<proxy>

<mroute-proxy-interface>IFNAME</mroute-proxy-interface>

</config>

</proxy>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp mroute-proxy IFNAME

Configure unsolicited report interval

Use this attribute to set an unsolicited report interval for an interface designated as an IGMP proxy

Attribute Name: unsolicited-report-interval

Attribute Type: uint16

Default Value: 1000

Attribute Range: 1000-25500

Netconf edit-config payload

</config>

<proxy>

<unsolicited-report-interval>1000</unsolicited-report-interval>

</config>

</proxy>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp proxy unsolicited-report-interval <1000-25500>

Configure limit exception acl

Attribute Name: limit-exception-acl

Attribute Type: string

Attribute Name: member-limit

Attribute Type: uint32

Attribute Range: 1-2097152

Netconf edit-config payload

</config>

<group-membership-control>

<member-limit>1</member-limit>

<limit-exception-acl>WORD</limit-exception-acl>

</config>

</group-membership-control>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp limit <1-2097152> (except WORD|)

Configure member limit

Attribute Name: member-limit

Attribute Type: uint32

Attribute Range: 1-2097152

Netconf edit-config payload

</config>

<group-membership-control>

<member-limit>1</member-limit>

</config>

</group-membership-control>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp limit <1-2097152>

Configure access group name

Use this attribute to control the multicast local-membership groups learned on an interface. This attribute applies to interfaces configured for IGMP Layer-3 multicast protocols, IGMP proxy.

Attribute Name: access-group-name

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<group-membership-control>

<access-group-name>WORD</access-group-name>

</config>

</group-membership-control>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp access-group WORD

Configure immediate leave groups list

In IGMP version 2, use this attribute to minimize the leave latency of IGMP memberships. This attribute is used when only one receiver host is connected to each interface. This command applies to interfaces configured for IGMP Layer-3 multicast protocols, IGMP Proxy.

Attribute Name: immediate-leave-groups-list

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<group-membership-control>

<immediate-leave-groups-list>WORD</immediate-leave-groups-list>

</config>

</group-membership-control>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp immediate-leave group-list WORD

Configure group address

Use this attribute to statically configure group membership entries on an interface. To statically add only a group membership, do not specify any parameters. This attribute applies to IGMP operation on a specific interface to statically add group and/or source records on a VLAN interface to statically add group and/or source records.

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

<asm-static-groups>

<asm-static-group>

<group-address>A.B.C.D</group-address>

<group-address>A.B.C.D</group-address>

</config>

</asm-static-group>

</asm-static-groups>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp static-group A.B.C.D

Configure source

Use this attribute to statically configure the group to be joined.

Attribute Name: source

Attribute Type: union

Netconf edit-config payload

</config>

<ssm-static-groups>

<ssm-static-group>

<group-address>A.B.C.D</group-address>

</config>

<group-address>A.B.C.D</group-address>

</ssm-static-group>

</ssm-static-groups>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp static-group A.B.C.D source (ssm-map|A.B.C.D)

Configure name

Use this attribute to configure a join multicast group.

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

<asm-join-groups>

<asm-join-group>

<group-address>A.B.C.D</group-address>

<group-address>A.B.C.D</group-address>

</config>

</asm-join-group>

</asm-join-groups>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp join-group A.B.C.D

Configure ssm-join-groups source

Use this attribute to statically configure the group to be joined.

Attribute Name: source

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

<ssm-join-groups>

<ssm-join-group>

<group-address>A.B.C.D</group-address>

</config>

<group-address>A.B.C.D</group-address>

</ssm-join-group>

</ssm-join-groups>

</interface>

</interfaces>

</igmp>

Command Syntax

ip igmp join-group A.B.C.D source A.B.C.D

IPI-IGMP-SNOOPING

Configure disable igmp snooping

Use this attribute to disable IGMP Snooping. When this attribute is given in the Configure mode, IGMP snooping is enabled at switch level on all the vlans in switch. When this attribute is given at the VLAN interface level, IGMP Snooping is enabled for that VLAN.

Attribute Name: disable-igmp-snooping

Attribute Type: uint8

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</disable-igmp-snooping>

</config>

</global>

</igmp-snooping>

Command Syntax

no igmp snooping

Configure disable report suppression

Use this attribute to disable report suppression for IGMP version 1, 2 and 3 reports. By default report suppression is enabled.

Attribute Name: disable-report-suppression

Attribute Type: uint8

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</disable-report-suppression>

</config>

</global>

</igmp-snooping>

Command Syntax

no igmp snooping report-suppression

Configure unknown multicast action

Use this attribute to set the action to be taken on receiving l2 unknown multicast packets.

Attribute Name: unknown-multicast-action

Attribute Type: enum (flood|discard)

Default Value: flood

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<unknown-multicast-action>flood</unknown-multicast-action>

</config>

</global>

</igmp-snooping>

Command Syntax

l2 unknown mcast (flood|discard)

Configure options

Enable IGMP snooping debug

Attribute Name: options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<debug>

<options>decode</options>

</config>

</debug>

</igmp-snooping>

Command Syntax

debug igmp snooping (decode|encode|events|fsm|tib|all)

Configure igmp snooping

Use this attribute to enable or disable IGMP Snooping.When this command is given at the VLAN interface level, IGMP Snooping is enabled for that VLAN.

Attribute Name: igmp-snooping

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<igmp-snooping>disable</igmp-snooping>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

no ip igmp snooping

Configure report suppression

Use this attribute to enable or disable report suppression for IGMP version 1, 2 and 3 reports. By default report suppression is enabled.

Attribute Name: report-suppression

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<report-suppression>disable</report-suppression>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

no ip igmp snooping report-suppression

Configure enable fast leave

Use this attribute to enable IGMP Snooping fast-leave processing. Fast-leave processing is analogous to immediateleave processing the IGMP group-membership is removed, as soon as an IGMP leave group message is received without sending out a group-specific query

Attribute Name: enable-fast-leave

Attribute Type: uint8

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

</enable-fast-leave>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

ip igmp snooping fast-leave

Configure mrouter interface name

Use this attribute to statically configure the specified VLAN constituent interface as a multicast router interface for IGMP Snooping in that VLAN.

Attribute Name: mrouter-interface-name

Attribute Type: string

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<mrouter-interface-name>IFNAME</mrouter-interface-name>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

ip igmp snooping mrouter interface IFNAME

Configure enable querier

Use this attribute to enable IGMP snooping querier functionality on a VLAN when IGMP is not enabled on the particular VLAN. When enabled, the IGMP Snooping querier sends out periodic IGMP queries for all interfaces on that VLAN.The IGMP Snooping querier uses the 0.0.0.0 source IP address, because it only masquerades as a proxy IGMP querier for faster network convergence. It does not start, or automatically cease, the IGMP Querier operation if it detects query message(s) from a multicast router. It restarts as the IGMP Snooping querier if no queries are seen within the other querier interval.

Attribute Name: enable-querier

Attribute Type: uint8

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

</enable-querier>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

ip igmp snooping querier

Configure name

Use this attribute to enable or disable IGMP Snooping.When this command is given at the VLAN interface level, IGMP Snooping is enabled for that VLAN.

Attribute Name: igmp-snooping

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<igmp-snooping>disable</igmp-snooping>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping (disable|enable)

Configure interface enable-fast-leave

Attribute Name: enable-fast-leave

Attribute Type: empty

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

</enable-fast-leave>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping fast-leave

Configure interface report-suppression

Use this attribute to enable or disable report suppression for IGMP version 1, 2 and 3 reports. By default report suppression is enabled.

Attribute Name: report-suppression

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<report-suppression>disable</report-suppression>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping report-suppression (disable|enable)

Configure interface mrouter-interface-name

Use this attribute to statically configure the specified VLAN constituent interface as a multicast router interface for IGMP Snooping in that VLAN.

Attribute Name: mrouter-interface-name

Attribute Type: string

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<mrouter-interface-name>IFNAME</mrouter-interface-name>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping mrouter interface IFNAME

Configure interface enable-querier

Attribute Name: enable-querier

Attribute Type: empty

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

</enable-querier>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping querier

Configure source address

Use this attribute to set the Source Address to be joined

Attribute Name: source-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<static-groups>

<ssm-groups>

<ssm-group>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

<source-address>A.B.C.D</source-address>

<group-address>A.B.C.D</group-address>

</config>

<source-address>A.B.C.D</source-address>

<group-address>A.B.C.D</group-address>

</ssm-group>

</ssm-groups>

</static-groups>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping static-group A.B.C.D source A.B.C.D interface IFNAME

Configure group address

Use this attribute to set the static group-address to be joined

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<igmp-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

</config>

<static-groups>

<ssm-groups>

<ssm-group>

<interface-name>IFNAME</interface-name>

<interface-name>IFNAME</interface-name>

<source-address>A.B.C.D</source-address>

<group-address>A.B.C.D</group-address>

</config>

<source-address>A.B.C.D</source-address>

<group-address>A.B.C.D</group-address>

</ssm-group>

</ssm-groups>

</static-groups>

</interface>

</interfaces>

</igmp-snooping>

Command Syntax

igmp snooping static-group A.B.C.D interface IFNAME

clear igmp snooping group A.B.C.D IFNAME

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<igmp-snooping-clear-group-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<group-address>A.B.C.D</group-address>

<interface-name>IFNAME</interface-name>

</igmp-snooping-clear-group-interface>

Command Syntax

clear igmp snooping group A.B.C.D IFNAME

clear igmp snooping interface IFNAME

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<igmp-snooping-clear-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<interface-name>IFNAME</interface-name>

</igmp-snooping-clear-interface>

Command Syntax

clear igmp snooping interface IFNAME

clear igmp snooping group *

Netconf RPC payload

<igmp-snooping-clear-group-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping"/>

Command Syntax

clear igmp snooping group *

clear igmp snooping

Netconf RPC payload

<igmp-snooping-clear-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping"/>

Command Syntax

clear igmp snooping

clear igmp snooping group A.B.C.D

Attribute Name: group-address

Attribute Type: inet:ipv4-address

Netconf RPC payload

<igmp-snooping-clear-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<group-address>A.B.C.D</group-address>

</igmp-snooping-clear-group>

Command Syntax

clear igmp snooping group A.B.C.D

debug igmp snooping (decode|encode|events|fsm|tib|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf RPC payload

<igmp-snooping-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<terminal-debug-options>decode</terminal-debug-options>

</igmp-snooping-terminal-debug-on>

Command Syntax

debug igmp snooping (decode|encode|events|fsm|tib|all)

no debug igmp snooping (decode|encode|events|fsm|tib|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf RPC payload

<igmp-snooping-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igmp-snooping">

<terminal-debug-options>decode</terminal-debug-options>

</igmp-snooping-terminal-debug-off>

Command Syntax

no debug igmp snooping (decode|encode|events|fsm|tib|all)

IPI-MLD-SNOOPING

Configure disable mld snooping

Use this attribute to enable MLD Snooping. When this command is given in the Configure mode, MLD Snooping is enabled at the switch level. When this attribute is given at the VLAN interface level, 5MLD Snooping is enabled for that VLAN.

Attribute Name: disable-mld-snooping

Attribute Type: uint8

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</disable-mld-snooping>

</config>

</global>

</mld-snooping>

Command Syntax

no mld snooping

Configure disable report suppression

Use this attribute to enable report suppression for MLD version 1.

Attribute Name: disable-report-suppression

Attribute Type: uint8

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</disable-report-suppression>

</config>

</global>

</mld-snooping>

Command Syntax

no mld snooping report-suppression

Configure options

Use this attribute to enable mld snooping debugging configurations

Attribute Name: options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<debug>

<options>decode</options>

</config>

</debug>

</mld-snooping>

Command Syntax

debug mld snooping (decode|encode|events|fsm|tib|all)

Configure report suppression

Use this attribute to enable or disable report suppression for MLD version 1, and 2 reports. By default report suppression is enabled.

Attribute Name: report-suppression

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

<report-suppression>disable</report-suppression>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

no mld snooping report-suppression

Configure mld snooping

Use this attribute to enable MLD Snooping. When this attribute is given at the VLAN interface level, MLD Snooping is enabled for that VLAN.

Attribute Name: mld-snooping

Attribute Type: enum (disable|enable)

Default Value: enable

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

<mld-snooping>enable</mld-snooping>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

mld snooping (disable|enable)

Configure enable fast leave

Use this attribute to enable MLD Snooping fast-leave processing. Fast-leave processing is analogous to immediateleave processing the MLD group-membership is removed, as soon as an MLD leave group message is received without sending out a group-specific query.

Attribute Name: enable-fast-leave

Attribute Type: empty

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

</enable-fast-leave>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

mld snooping fast-leave

Configure name

Use this attribute to enable or disable report suppression for MLD version 1, and 2 reports. By default report suppression is enabled.

Attribute Name: report-suppression

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

<report-suppression>disable</report-suppression>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

mld snooping report-suppression (disable|enable)

Configure mrouter interface name

Use this attribute to statically configure the specified VLAN constituent interface as a multicast router interface for MLD Snooping in that VLAN

Attribute Name: mrouter-interface-name

Attribute Type: string

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

<mrouter-interface-name>IFNAME</mrouter-interface-name>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

mld snooping mrouter interface IFNAME

Configure enable querier

Use this attribute to enable MLD querier operation on a subnet (VLAN) when no multicast routing protocol is configured in the subnet VLAN. When enabled, the MLD Snooping querier sends out periodic MLD queries for all interfaces on that VLAN. The MLD Snooping querier uses the 0.0.0.0 source IP address, because it masquerades as a proxy MLD querier for faster network convergence. It does not start or automatically cease the MLD querier operation if it detects a query message from a multicast router. It restarts as MLD snooping querier if no queries are seen within another querier interval

Attribute Name: enable-querier

Attribute Type: empty

Netconf edit-config payload

<mld-snooping xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

</config>

</enable-querier>

</interface>

</interfaces>

</mld-snooping>

Command Syntax

mld snooping querier

debug mld snooping (decode|encode|events|fsm|tib|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf RPC payload

<mld-snooping-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<terminal-debug-options>decode</terminal-debug-options>

</mld-snooping-terminal-debug-on>

Command Syntax

debug mld snooping (decode|encode|events|fsm|tib|all)

no debug mld snooping (decode|encode|events|fsm|tib|all)

Attribute Name: terminal-debug-options

Attribute Type: bits (decode|encode|events|fsm|tib|all)

Netconf RPC payload

<mld-snooping-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<terminal-debug-options>decode</terminal-debug-options>

</mld-snooping-terminal-debug-off>

Command Syntax

no debug mld snooping (decode|encode|events|fsm|tib|all)

clear mld snooping group X:X::X:X IFNAME

Attribute Name: group-address

Attribute Type: string

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<mld-snooping-clear-group-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<group-address>X:X::X:X</group-address>

<interface-name>IFNAME</interface-name>

</mld-snooping-clear-group-on-interface>

Command Syntax

clear mld snooping group X:X::X:X IFNAME

clear mld snooping interface IFNAME

Attribute Name: interface-name

Attribute Type: string

Netconf RPC payload

<mld-snooping-clear-all-groups-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<interface-name>IFNAME</interface-name>

</mld-snooping-clear-all-groups-on-interface>

Command Syntax

clear mld snooping interface IFNAME

clear mld snooping group X:X::X:X

Attribute Name: group-address

Attribute Type: string

Netconf RPC payload

<mld-snooping-clear-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping">

<group-address>X:X::X:X</group-address>

</mld-snooping-clear-group>

Command Syntax

clear mld snooping group X:X::X:X

clear mld snooping group *

Netconf RPC payload

<mld-snooping-clear-all-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping"/>

Command Syntax

clear mld snooping group *

clear mld snooping

Netconf RPC payload

<mld-snooping-clear-all-groups-alias xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld-snooping"/>

Command Syntax

clear mld snooping

IPI-MLD

Configure disable ssm map

Use this attribute to enable/disable SSM mapping on the router

Attribute Name: disable-ssm-map

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</disable-ssm-map>

</vrf>

</vrfs>

</mld>

Command Syntax

no ipv6 mld (vrf NAME|) ssm-map enable

Configure limit exception acl

Use this attribute to set the maximum number of group membership states at the router level. Once the specified number of group memberships is reached, all further local-memberships are ignored. Optionally, an exception access-list can be configured to specify the group-address(es) to be excluded from being subject to the limit. This command applies to interfaces configured for MLD Layer-3 multicast protocols and MLD Proxy. The limit applies, individually, to each of its constituent interfaces.

Attribute Name: limit-exception-acl

Attribute Type: string

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<group-membership-control>

<member-limit>1</member-limit>

<limit-exception-acl>WORD</limit-exception-acl>

</config>

</group-membership-control>

</vrf>

</vrfs>

</mld>

Command Syntax

ipv6 mld (vrf NAME|) limit <1-2097152> (except WORD|)

Configure member limit

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<group-membership-control>

<member-limit>1</member-limit>

</config>

</group-membership-control>

</vrf>

</vrfs>

</mld>

Command Syntax

ipv6 mld (vrf NAME|) limit <1-2097152>

Configure source

Use this attribute to specify the static mcast source for SSM mapping. SSM mapping statically assigns sources to MLDv1 groups to translate such (star G) groups memberships to (S,G) memberships for use with PIM-SSM.This attribute applies to interfaces configured for MLD Layer-3 multicast protocols and MLD Proxy.

Attribute Name: source

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<ssm>

<static-mappings>

<static-mapping>

<group-ranges-acl>WORD</group-ranges-acl>

</config>

<group-ranges-acl>WORD</group-ranges-acl>

</static-mapping>

</static-mappings>

</ssm>

</vrf>

</vrfs>

</mld>

Command Syntax

ipv6 mld (vrf NAME|) ssm-map static WORD X:X::X:X

Configure debug options

Use this attribute to enable mld debugging configurations

Attribute Name: debug-options

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<debug>

<debug-options>all</debug-options>

</config>

</debug>

</vrf>

</vrfs>

</mld>

Command Syntax

debug ipv6 mld (vrf NAME|) (all|decode|encode|events|fsm|tib)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: term-debug-options

Netconf RPC payload

<mld-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<term-debug-options>all</term-debug-options>

</mld-terminal-debug-on>

Command Syntax

debug ipv6 mld (vrf NAME|) (all|decode|encode|events|fsm|tib)

no debug ipv6 mld (vrf NAME|) (all|decode|encode|events|fsm|tib)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: term-debug-options

Netconf RPC payload

<mld-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<term-debug-options>all</term-debug-options>

</mld-terminal-debug-off>

Command Syntax

no debug ipv6 mld (vrf NAME|) (all|decode|encode|events|fsm|tib)

clear ipv6 mld (vrf NAME|)

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Netconf RPC payload

<mld-clear-all-groups-alias xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

</mld-clear-all-groups-alias>

Command Syntax

clear ipv6 mld (vrf NAME|)

clear ipv6 mld (vrf NAME|) group *

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: clear-all

Attribute Type: empty

Netconf RPC payload

<mld-clear-all-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<clear-all>CML_EMPTY_T</clear-all>

</mld-clear-all-groups>

Command Syntax

clear ipv6 mld (vrf NAME|) group *

clear ipv6 mld (vrf NAME|) group X:X::X:X IFNAME

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<mld-clear-group-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

<if-name>IFNAME</if-name>

</mld-clear-group-on-interface>

Command Syntax

clear ipv6 mld (vrf NAME|) group X:X::X:X IFNAME

clear ipv6 mld (vrf NAME|) interface IFNAME

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: if-name

Attribute Type: string

Netconf RPC payload

<mld-clear-all-groups-on-interface xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<if-name>IFNAME</if-name>

</mld-clear-all-groups-on-interface>

Command Syntax

clear ipv6 mld (vrf NAME|) interface IFNAME

clear ipv6 mld (vrf NAME|) group X:X::X:X

Attribute Name: vrf-name

Attribute Type: string

Default Value: default

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Netconf RPC payload

<mld-clear-group xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-mld">

<vrf-name>NAME</vrf-name>

<group-address>X:X::X:X</group-address>

</mld-clear-group>

Command Syntax

clear ipv6 mld (vrf NAME|) group X:X::X:X

IPI-MLD-INTERFACE

Configure enabled

Use this attribute to enable the MLD protocol operation on an interface. This attribute enables MLD protocol operation in stand-alone mode, and can be used to learn local-membership information prior to enabling a multicast routing protocol on the interface. This attribute will have no effect on interfaces configured for MLD Proxy.

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

</config>

</enabled>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld

Configure last member query count

Use this attribute to set the last-member query-count value. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: last-member-query-count

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-7

Netconf edit-config payload

</config>

<last-member-query-count>2</last-member-query-count>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld last-member-query-count <2-7>

Configure last member query interval

Use this attribute to set the frequency at which the router sends MLD group-specific host query messages. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy

Attribute Name: last-member-query-interval

Attribute Type: uint16

Default Value: 1000

Attribute Range: 1000-25500

Netconf edit-config payload

</config>

<last-member-query-interval>1000</last-member-query-interval>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld last-member-query-interval <1000-25500>

Configure querier timeout

Use this attribute to configure the timeout period before the router takes over as the querier for the interface after the previous querier has stopped querying. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: querier-timeout

Attribute Type: uint16

Default Value: 250

Attribute Range: 60-300

Netconf edit-config payload

</config>

<querier-timeout>60</querier-timeout>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld querier-timeout <60-300>

Configure query interval

Use this attribute to set the frequency of sending MLD host query messages. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: query-interval

Attribute Type: uint16

Default Value: 125

Attribute Range: 1-18000

Netconf edit-config payload

</config>

<query-interval>1</query-interval>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld query-interval <1-18000>

Configure query max response time

Use this attribute to set the maximum response time advertised in MLD queries. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: query-max-response-time

Attribute Type: uint8

Default Value: 10

Attribute Range: 1-240

Netconf edit-config payload

</config>

<query-max-response-time>1</query-max-response-time>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld query-max-response-time <1-240>

Configure startup query interval

Use this attribute to set a startup query interval value for MLD

Attribute Name: startup-query-interval

Attribute Type: uint16

Default Value: 31

Attribute Range: 1-18000

Netconf edit-config payload

</config>

<startup-query-interval>1</startup-query-interval>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld startup-query-interval <1-18000>

Configure startup query count

Use this attribute to set a startup query count for MLD

Attribute Name: startup-query-count

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-10

Netconf edit-config payload

</config>

<startup-query-count>2</startup-query-count>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld startup-query-count <2-10>

Configure robustness variable

Use this attribute to set the robustness variable value on an interface. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: robustness-variable

Attribute Type: uint8

Default Value: 2

Attribute Range: 2-7

Netconf edit-config payload

</config>

<robustness-variable>2</robustness-variable>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld robustness-variable <2-7>

Configure version

Use this attribute to set the current MLD protocol version on an interface. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Snooping, or MLD Proxy.

Attribute Name: version

Attribute Type: uint8

Attribute Range: 1-2

Netconf edit-config payload

</config>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld version <1-2>

Configure enable proxy service

Use this attribute to designate an interface to be the MLD proxy-service upstream host-side interface, thus enabling MLD host-side protocol operation on this interface. All associated downstream router-side interfaces will have their memberships consolidatedon this interface, according to MLD host-side functionality. This attribute should not be used when configuring interfaces enabled for MLD in association with a multicast-routing protocol, otherwise the behavior will be undefined.

Attribute Name: enable-proxy-service

Attribute Type: empty

Netconf edit-config payload

</config>

<proxy>

</enable-proxy-service>

</config>

</proxy>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld proxy-service

Configure mroute proxy interface

Use this attribute to specify the MLD Proxy service (upstream host-side) interface with which to be associated. MLD router-side protocol operation is enabled only when the specified upstream proxy-service interface is functional. This attribute should not be configured on interfaces enabled for MLD in association with a multicast routing protocol otherwise, the behavior will be undefined.

Attribute Name: mroute-proxy-interface

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<proxy>

<mroute-proxy-interface>IFNAME</mroute-proxy-interface>

</config>

</proxy>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld mroute-proxy IFNAME

Configure unsolicited report interval

Use this attribute to set an unsolicited report interval for an interface designated as an MLD proxy

Attribute Name: unsolicited-report-interval

Attribute Type: uint16

Default Value: 1000

Attribute Range: 1000-25500

Netconf edit-config payload

</config>

<proxy>

<unsolicited-report-interval>1000</unsolicited-report-interval>

</config>

</proxy>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld proxy unsolicited-report-interval <1000-25500>

Configure limit exception acl

Attribute Name: limit-exception-acl

Attribute Type: string

Default Value: NULL

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

</config>

<group-membership-control>

<member-limit>1</member-limit>

<limit-exception-acl>WORD</limit-exception-acl>

</config>

</group-membership-control>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld limit <1-2097152> (except WORD|)

Configure member limit

Use this attribute to set the limit on the maximum number of group membership states at either the router level, or forthe specified interface. Once the specified number of group memberships is reached, all further local-memberships will be ignored. Optionally, an exception access-list can be configured to specify the group-address(es) to be excluded from being subject to the limit.

Attribute Name: member-limit

Attribute Type: uint32

Default Value: 1

Attribute Range: 1-2097152

Netconf edit-config payload

</config>

<group-membership-control>

<member-limit>1</member-limit>

</config>

</group-membership-control>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld limit <1-2097152>

Configure access group name

Use this attribute to control the multicast local-membership groups learned on an interface. This attribute applies to interfaces configured for MLD Layer-3 multicast protocols, MLD proxy.

Attribute Name: access-group-name

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<group-membership-control>

<access-group-name>WORD</access-group-name>

</config>

</group-membership-control>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld access-group WORD

Configure immediate leave groups list

In MLD version 2, use this attribute to minimize the leave latency of MLD memberships. This attribute is used when only one receiver host is connected to each interface. This command applies to interfaces configured for MLD Layer-3 multicast protocols, MLD Proxy.

Attribute Name: immediate-leave-groups-list

Attribute Type: string

Default Value: NULL

Netconf edit-config payload

</config>

<group-membership-control>

<immediate-leave-groups-list>WORD</immediate-leave-groups-list>

</config>

</group-membership-control>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld immediate-leave group-list WORD

Configure group address

Use this attribute to statically configure IPv6 group membership entries on an interface. To statically add only a group membership, do not specify any parameters. This attribute applies to MLD operation on a specific interface to statically add group and/or source records or to MLD Snooping on a VLAN interface to statically add group and/or source records.

Attribute Name: group-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

</config>

<asm-static-groups>

<asm-static-group>

<group-address>X:X::X:X</group-address>

<group-address>X:X::X:X</group-address>

</config>

</asm-static-group>

</asm-static-groups>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld static-group X:X::X:X

Configure source

Use this attribute to statically configure the multicast source for group to be joined.

Attribute Name: source

Attribute Type: union

Netconf edit-config payload

</config>

<ssm-static-groups>

<ssm-static-group>

<group-address>X:X::X:X</group-address>

</config>

<group-address>X:X::X:X</group-address>

</ssm-static-group>

</ssm-static-groups>

</interface>

</interfaces>

</mld>

Command Syntax

ipv6 mld static-group X:X::X:X source (ssm-map|X:X::X:X)

IPI-ROUTEMAP

Configure action

Use this attribute to enter the route-map mode and to permit or deny match/set operations.If deny is specified, and the match criteria are met, the route is not redistributed, and any other route maps with the same map tag are not examined.If permit is specified, and the match criteria are met, the route is redistributed as specified by the set actions. If the match criteria are not met, the next route map with the same tag is tested.

Attribute Name: action

Attribute Type: enum (permit|deny)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<action>permit</action>

</routemap>

</routemaps>

Command Syntax

route-map WORD ((permit|deny)|) (<1-65535>|)

Configure continue to next sequence

The continue clause provides the capability to execute additional entries in a route map after an entry is executed with a successful match and set clauses Example the continue command allows multiple entries to be evaluated within a single route-map.

Attribute Name: continue-to-next-sequence

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<continue-on-match>

</continue-to-next-sequence>

</config>

</continue-on-match>

</routemap>

</routemaps>

Command Syntax

continue

Configure next sequence number

Continue commands can be assigned optional sequence numbers that indicate the order in which clauses are to be evaluated.

Attribute Name: next-sequence-number

Attribute Type: uint32

Attribute Range: 2-65535

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<continue-on-match>

<next-sequence-number>2</next-sequence-number>

</config>

</continue-on-match>

</routemap>

</routemaps>

Command Syntax

continue <2-65535>

Configure interface name

Use this attribute to define the interface match criterion. This command specifies the next-hop interface name of a route to be matched

Attribute Name: interface-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<interface-name>IFNAME</interface-name>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match interface IFNAME

Configure metric

Use this attribute to match a metric of a route. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

Attribute Name: metric

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match metric <1-4294967295>

Configure tag

Use this command to set a tag value. The parameter is the route tag that is labeled by another routing protocol (BGP or other IGP when redistributing), because AS-external-LSA has a route-tag field in its LSAs. In addition, when using route-map, OcNOS can tag the LSAs with the appropriate tag value. Sometimes the tag matches with using route-map and sometimes, the value may be used by another application.

Attribute Name: tag

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match tag <1-4294967295>

Configure route type

Use this attribute to match an external route type. AS-external LSA is either Type-1 or Type-2. External type-1 matches only Type 1 external routes and external type-2 matches only Type 2 external routes.

Attribute Name: route-type

Attribute Type: enum (type-1|type-2)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<route-type>type-1</route-type>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match route-type external (type-1|type-2)

Configure as path name

Use this command to match an autonomous system path access list. This command specifies the autonomous system path to be matched. If there is a match for the specified AS path, and permit is specified, the route is redistributed or controlled, as specified by the set action. If the match criteria are met, and deny is specified, the route is not redistributed or controlled. If the match criteria are not met then the route is neither accepted nor forwarded,irrespective of permit or deny specifications.The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes, depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

Attribute Name: as-path-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<as-path-name>WORD</as-path-name>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match as-path WORD

Configure route origin

Use this attribute to match origin code.The origin attribute defines the origin of the path information. The egp parameter is indicated as an e in the routing table, and it indicates that the origin of the information is learned via EGP (Exterior Gateway Protocol). The igp parameter is indicated as an i in the routing table, and it indicates the origin of the path information is interior to the originating AS. The incomplete parameter is indicated as a ? in the routing table, and indicates that the origin of the path information is unknown or learned through other means. If a static route is redistributed into BGP, the origin of the route is incomplete.This command specifies the origin to be matched. If there is a match for the specified origin, and permit is specified when you created the route-map, the route is redistributed or controlled as specified by the set action. If the match criteria are met, and deny is specified, the route is not redistributed or controlled. If the match criteria are not met, the route is neither accepted nor forwarded, irrespective of permit or deny specifications. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables

Attribute Name: route-origin

Attribute Type: enum (egp|igp|incomplete)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<route-origin>egp</route-origin>

</config>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match origin (egp|igp|incomplete)

Configure community identifier

Use this attribute to specify the community to be matched.Communities are used to group and filter routes. They are designed to provide the ability to apply policies to large numbers of routes by using match and set commands.Community lists are used to identify and filter routes by their common attributes. This command allows the matching based on community lists.The values set by the match community command overrides the global values. The route that does not match at least one match clause is ignored.

Attribute Name: community-identifier

Attribute Type: union

Attribute Name: match-type

Attribute Type: enum (no-exact-match|exact-match)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<community-identifier>RMAP_COMMUNITY_STRING_T</community-identifier>

<community-identifier>RMAP_COMMUNITY_STRING_T</community-identifier>

<match-type>no-exact-match</match-type>

</config>

</community>

</communities>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match community (WORD|<1-99>|<100-500>) ((exact-match)|)

Configure extended community identifier

Use this attribute to match BGP external community list.Communities are used to group and filter routes. They are designed to provide the ability to apply policies to large numbers of routes by using match and set commands. Community lists are used to identify and filter routes by their common attributes. This command allows the matching based on community lists. The values set by this command overrides the global values. The route that does not match at least one match clause is ignored

Attribute Name: extended-community-identifier

Attribute Type: union

Attribute Name: match-type

Attribute Type: enum (no-exact-match|exact-match)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<extended-communities>

<extended-community>

<extended-community-identifier>RMAP_EXTCOMMUNITY_STRING_T</extended-community-identifier>

<extended-community-identifier>RMAP_EXTCOMMUNITY_STRING_T</extended-community-identifier>

<match-type>no-exact-match</match-type>

</config>

</extended-community>

</extended-communities>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match extcommunity (WORD|<1-99>|<100-500>) ((exact-match)|)

Configure match type

Do exact matching of extcommunities

Attribute Name: match-type

Attribute Type: enum (no-exact-match|exact-match)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<extended-communities>

<extended-community>

<extended-community-identifier>RMAP_EXTCOMMUNITY_STRING_T</extended-community-identifier>

<extended-community-identifier>RMAP_EXTCOMMUNITY_STRING_T</extended-community-identifier>

</config>

<match-type>0</match-type>

</extended-community>

</extended-communities>

</match-condition>

</routemap>

</routemaps>

Command Syntax

no match extcommunity exact-match

Configure large community list identifier

Attribute Name: large-community-list-identifier

Attribute Type: union

Attribute Name: match-type

Attribute Type: enum (no-exact-match|exact-match)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<match-communities>

<match-community>

<large-community-list-identifier>RMAP_LARGE_COMMUNITY_STRING_T</large-community-list-identifier>

<large-community-list-identifier>RMAP_LARGE_COMMUNITY_STRING_T</large-community-list-identifier>

<match-type>no-exact-match</match-type>

</config>

</match-community>

</match-communities>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match large-community (WORD|<1-99>|<100-500>) ((exact-match)|)

Configure ip access list name

Use this attribute to specify the match address of route. If there is a match for the specified IP address, and permit is specified, the route is redistributed or controlled, as specified by the set action. If the match criteria are met, and deny is specified then the route is not redistributed or controlled. If the match criteria are not met, the route is neither accepted nor forwarded, irrespective of permit or deny specifications.The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes, depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

Attribute Name: ip-access-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv4>

<ip-access-list-name>WORD</ip-access-list-name>

</config>

</ipv4>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ip address WORD

Configure ip prefix list name

Use this attribute to match entries of a prefix-list. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

Attribute Name: ip-prefix-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv4>

<ip-prefix-list-name>WORD</ip-prefix-list-name>

</config>

</ipv4>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ip address prefix-list WORD

Configure peer access list name

Use this attribute to specify the match peer IPv4 address of a route.

Attribute Name: peer-access-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv4>

<peer-access-list-name>WORD</peer-access-list-name>

</config>

</ipv4>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ip peer WORD

Configure next hop prefix list name

Use this attribute to specify the next-hop IP address match criterion using the prefix-list. This command matches the next-hop IP address of a route.

Attribute Name: next-hop-prefix-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv4>

<next-hop-prefix-list-name>WORD</next-hop-prefix-list-name>

</config>

</ipv4>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ip next-hop prefix-list WORD

Configure next hop access list name

Use this attribute to specify a next-hop address to be matched in a route-map. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

Attribute Name: next-hop-access-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv4>

<next-hop-access-list-name>WORD</next-hop-access-list-name>

</config>

</ipv4>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ip next-hop WORD

Configure ipv6 address access list name

Use this attribute to specify the match address of route. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-address-access-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv6>

<ipv6-address-access-list-name>WORD</ipv6-address-access-list-name>

</config>

</ipv6>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ipv6 address WORD

Configure ipv6 prefix list name

Use this attribute to match entries of a prefix-list. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes, depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: ipv6-prefix-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv6>

<ipv6-prefix-list-name>WORD</ipv6-prefix-list-name>

</config>

</ipv6>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ipv6 address prefix-list WORD

Configure routemap name

Use this attribute to specify the match peer IPv6 address of a route.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: peer-access-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv6>

<peer-access-list-name>WORD</peer-access-list-name>

</config>

</ipv6>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ipv6 peer WORD

Configure sequence id

This command is supported when following feature are enabled IPV6 feature

Attribute Name: next-hop-prefix-list-name

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv6>

<next-hop-prefix-list-name>WORD</next-hop-prefix-list-name>

</config>

</ipv6>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ipv6 next-hop prefix-list WORD

Configure next hop match string

Use this attribute to specify the next-hop address to be matched. The route specified by the policies might not be the same as specified by the routing protocols. Setting policies enable packets to take different routes depending on their length or content. Packet forwarding based on configured policies overrides packet forwarding specified in routing tables.

This command is supported when following feature are enabled IPV6 feature

Attribute Name: next-hop-match-string

Attribute Type: union

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<match-condition>

<ipv6>

<next-hop-match-string>RMAP_IPV6_NEXTHOP_T</next-hop-match-string>

</config>

</ipv6>

</match-condition>

</routemap>

</routemaps>

Command Syntax

match ipv6 next-hop (WORD|X:X::X:X)

Configure metric value

Use this command to set a metric value for a route and influence external neighbors about the preferred path into an Autonomous System (AS). The preferred path is the one with a lower metric value. A router compares metrics for paths from neighbors in the same ASs. To compare metrics from neighbors coming from different ASs, use the bgp always-compare-med command.To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met.If the packets do not match any of the defined criteria, they are routed through the normal routing process.

Attribute Name: metric-value

Attribute Type: string

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<metric-value>WORD</metric-value>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set metric WORD

Configure forward interface type

Use this attributes to discard routes based on policy/rules configured for a route map.Route maps can be applied to BGP neighbors. When this command is given for a route map and that route map is applied to a BGP neighbor, the discard route entries are added by BGP for the prefix permitted by the route map.

Attribute Name: forward-interface-type

Attribute Type: enum (null0|tunnel-te)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<forward-interface-type>null0</forward-interface-type>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set interface (null0|tunnel-te)

Configure route tag

Use this attribute to set a tag value. The parameter is the route tag that is labeled by another routing protocol (BGP or other IGP when redistributing), because AS-external-LSA has a route-tag field in its LSAs. In addition, when using route-map, OcNOS can tag the LSAs with the appropriate tag value. Sometimes the tag matches with using route-map, and sometimes, the value may be used by another application.

Attribute Name: route-tag

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<route-tag>1</route-tag>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set tag <1-4294967295>

Configure weight

Use this attribute to set weights for the routing table. The weight value is used to assist in best path selection. It is assigned locally to a router. When there are several routes with a common destination, the routes with a higher weight value are preferred. To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met.

Attribute Name: weight

Attribute Type: uint32

Attribute Range: 0-65535

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set weight <0-65535>

Configure local preference

Use this attribute to set the BGP local preference path attribute

Attribute Name: local-preference

Attribute Type: uint32

Attribute Range: 0-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<local-preference>0</local-preference>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set local-preference <0-4294967295>

Configure route origin type

Use this command to set the BGP origin code. The origin attribute defines the origin of the path information. To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met.If the packets do not match any of the defined criteria, they are routed through the normal routing process.

Attribute Name: route-origin-type

Attribute Type: enum (egp|igp|incomplete)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<route-origin-type>egp</route-origin-type>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set origin (egp|igp|incomplete)

Configure metric type

Use this command to set the metric type for the destination routing protocol. Select a type to be either Type-1 or Type2 in the AS-external-LSA when the route-map matches the condition.

Attribute Name: metric-type

Attribute Type: enum (type-1|type-2|internal|external)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<metric-type>type-1</metric-type>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set metric-type (type-1|type-2|internal|external)

Configure aigp metric

Use this command to set the AIGP metric for BGP protocol routes.

Attribute Name: aigp-metric

Attribute Type: union

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<aigp-metric>igp-metric</aigp-metric>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set aigp-metric (igp-metric|<1-4294967295>)

Configure level type

Use this attribute to set the IS-IS level to export a route.

Attribute Name: level-type

Attribute Type: enum (level-1|level-2|level-1-2)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<level-type>level-1</level-type>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set level (level-1|level-2|level-1-2)

Configure enable as path tag

Use this command to modify an autonomous system path for a route. By specifying the length of the AS-Path, the router influences the best path selection by a neighbor

Attribute Name: enable-as-path-tag

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</enable-as-path-tag>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set as-path tag

Configure atomic aggregate

Use this attribute to set an atomic aggregate attribute.To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met.If the packets do not match any of the defined criteria, they are routed through the normal routing process.

Attribute Name: atomic-aggregate

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</atomic-aggregate>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set atomic-aggregate

Configure delete community value

Use this attribute to delete the matched communities from the community attribute of an inbound or outbound update when applying route-map.

Attribute Name: delete-community-value

Attribute Type: union

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<delete-community-value>RMAP_COMMUNITY_STRING_T</delete-community-value>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set comm-list (WORD|<1-99>|<100-500>) delete

Configure delete large community value

Use this attribute to delete the matched large-communities from the community attribute of an inbound or outbound update when applying route-map.

Attribute Name: delete-large-community-value

Attribute Type: union

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<delete-large-community-value>RMAP_COMMUNITY_STRING_T</delete-large-community-value>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set large-comm-list (WORD|<1-99>|<100-500>) delete

Configure bgp originator id

Use this command to set the originator ID attribute. To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met.If the packets do not match any of the defined criteria, they are routed through the normal routing process

Attribute Name: bgp-originator-id

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<bgp-originator-id>A.B.C.D</bgp-originator-id>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set originator-id A.B.C.D

Configure as path prepend

Use this attributes to modify an autonomous system path for a route. By specifying the length of the AS-Path, the router influences the best path selection by a neighbor.Use this command to prepend an AS path string to routes increasing the AS path length.To use this command, you must first give the match and set commands configure the conditions for redistributing routes from one routing protocol to another: 1. The match command specifies the match criteria under which redistribution is allowed for the current route-map. 2.The set command specifies the set redistribution actions to be performed if the match criteria are met.If the packets do not match any of the defined criteria, they are routed through the normal routing process.

Attribute Name: as-path-prepend

Attribute Type: string

Attribute Range: 1-255

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<as-path-prepend>1</as-path-prepend>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set as-path prepend .<1-4294967295>

Configure ext community site of origin

Use this attribute to set an extended community attribute as Site-of-origin extended community.

Attribute Name: ext-community-site-of-origin

Attribute Type: string

Attribute Range: 1-255

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ext-community-site-of-origin>AA:NN_or_IP:nn</ext-community-site-of-origin>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set extcommunity soo .AA:NN_or_IP:nn

Configure ext community color

Use this attribute to set an extended community attribute color value

Attribute Name: ext-community-color

Attribute Type: uint32

Attribute Range: 1-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ext-community-color>1</ext-community-color>

</config>

</set-action>

</routemap>

</routemaps>

Command Syntax

set extcommunity color <1-4294967295>

Configure ip nexthop address

Use this attribute to set the specified next-hop value.

Attribute Name: ip-nexthop-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ipv4>

<ip-nexthop-address>A.B.C.D</ip-nexthop-address>

</config>

</ipv4>

</set-action>

</routemap>

</routemaps>

Command Syntax

set ip next-hop A.B.C.D

Configure use peer address

Use this attribute to set the next hop value as BGP peer-address

Attribute Name: use-peer-address

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ipv4>

</use-peer-address>

</config>

</ipv4>

</set-action>

</routemap>

</routemaps>

Command Syntax

set ip next-hop peer-address

Configure vpnv4 nexthop address

Use this command to set a VPNv4 next-hop address. To use this command, you must first have a match clause. Match and set commands set the conditions for redistributing routes from one routing protocol to another. The match command specifies the match criteria under which redistribution is allowed for the current route-map. The set command specifies the set redistribution actions to be performed, if the match criteria are met. If the packets do not match any of the defined criteria, they are routed through the normal routing process.

Attribute Name: vpnv4-nexthop-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ipv4>

<vpnv4-nexthop-address>A.B.C.D</vpnv4-nexthop-address>

</config>

</ipv4>

</set-action>

</routemap>

</routemaps>

Command Syntax

set vpnv4 next-hop A.B.C.D

Configure ipv6 nexthop address

Use this attribute to set a next hop-address.

Attribute Name: ipv6-nexthop-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ipv6>

<ipv6-nexthop-address>X:X::X:X</ipv6-nexthop-address>

</config>

</ipv6>

</set-action>

</routemap>

</routemaps>

Command Syntax

set ipv6 next-hop X:X::X:X

Configure local ipv6 nexthop address

Use this attribute to set Local IPv6 address as next hop-address

Attribute Name: local-ipv6-nexthop-address

Attribute Type: inet:ipv6-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<ipv6>

<local-ipv6-nexthop-address>X:X::X:X</local-ipv6-nexthop-address>

</config>

</ipv6>

</set-action>

</routemap>

</routemaps>

Command Syntax

set ipv6 next-hop local X:X::X:X

Configure aggregator ip address

IP address of aggregator.

Attribute Name: aggregator-ip-address

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<bgp-aggregator-attributes>

<bgp-aggregator-attribute>

<aggregator-ip-address>A.B.C.D</aggregator-ip-address>

<aggregator-ip-address>A.B.C.D</aggregator-ip-address>

<as-number>1</as-number>

</config>

<as-number>1</as-number>

</bgp-aggregator-attribute>

</bgp-aggregator-attributes>

</set-action>

</routemap>

</routemaps>

Command Syntax

set aggregator as <1-4294967295> A.B.C.D

Configure ext community rt

use this attribute to set an Route target extended community

Attribute Name: ext-community-rt

Attribute Type: string

Attribute Range: 1-255

Attribute Name: additive-type

Attribute Type: enum (no-additive|additive)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<extended-community>

<route-targets>

<route-target>

<ext-community-rt>AA:NN_or_IP:nn</ext-community-rt>

<ext-community-rt>AA:NN_or_IP:nn</ext-community-rt>

<additive-type>no-additive</additive-type>

</config>

</route-target>

</route-targets>

</extended-community>

</set-action>

</routemap>

</routemaps>

Command Syntax

set extcommunity rt .AA:NN_or_IP:nn ((additive)|)

Configure cost value

use this attribute to set Extended community cost value

Attribute Name: cost-value

Attribute Type: uint32

Attribute Range: 0-4294967295

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<extended-community>

<costs>

<cost-value>0</cost-value>

<cost-value>0</cost-value>

<community-id>0</community-id>

<comparison-type>no-comparision</comparison-type>

</config>

<community-id>0</community-id>

<comparison-type>no-comparision</comparison-type>

</cost>

</costs>

</extended-community>

</set-action>

</routemap>

</routemaps>

Command Syntax

set extcommunity cost (igp|pre-bestpath|) <0-255> <0-4294967295>

Configure max suppress time limit

Maximum duration to suppress a stable route in minutes.

Attribute Name: max-suppress-time-limit

Attribute Type: uint8

Default Value: 60

Attribute Range: 1-255

Attribute Name: enable-dampening

Attribute Type: empty

Attribute Name: reachability-half-life-time

Attribute Type: uint8

Default Value: 15

Attribute Range: 1-45

Attribute Name: reuse-time-limit

Attribute Type: uint16

Default Value: 750

Attribute Range: 1-20000

Attribute Name: suppress-time-limit

Attribute Type: uint16

Default Value: 2000

Attribute Range: 1-20000

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</enable-dampening>

<reachability-half-life-time>1</reachability-half-life-time>

<reuse-time-limit>1</reuse-time-limit>

<suppress-time-limit>1</suppress-time-limit>

<max-suppress-time-limit>1</max-suppress-time-limit>

</config>

</dampening>

</set-action>

</routemap>

</routemaps>

Command Syntax

set dampening <1-45> <1-20000> <1-20000> <1-255>

Configure unreachability half life time

Un-reachability half-life time for the penalty in minutes.

Attribute Name: unreachability-half-life-time

Attribute Type: uint8

Default Value: 15

Attribute Range: 1-45

Attribute Name: enable-dampening

Attribute Type: empty

Attribute Name: reachability-half-life-time

Attribute Type: uint8

Default Value: 15

Attribute Range: 1-45

Attribute Name: reuse-time-limit

Attribute Type: uint16

Default Value: 750

Attribute Range: 1-20000

Attribute Name: suppress-time-limit

Attribute Type: uint16

Default Value: 2000

Attribute Range: 1-20000

Attribute Name: max-suppress-time-limit

Attribute Type: uint8

Default Value: 60

Attribute Range: 1-255

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</enable-dampening>

<reachability-half-life-time>1</reachability-half-life-time>

<reuse-time-limit>1</reuse-time-limit>

<suppress-time-limit>1</suppress-time-limit>

<max-suppress-time-limit>1</max-suppress-time-limit>

<unreachability-half-life-time>1</unreachability-half-life-time>

</config>

</dampening>

</set-action>

</routemap>

</routemaps>

Command Syntax

set dampening <1-45> <1-20000> <1-20000> <1-255> <1-45>

Configure enable dampening

Use this attribute to enable route dampening and set various parameters. Route dampening minimizes the instability caused by route flapping. A penalty is added for every flap in a flapping route. As soon as the total penalty reaches the suppress limit the advertisement of the route is suppressed. This penalty is decayed according to the configured half time value. Once the penalty is lower than the reuse limit, the route advertisement is unsuppressed. The dampening information is purged from the router once the penalty becomes less than half of the reuse limit.Reachability half-life time for the penalty in minutes. The time for the penalty to decrease to one-half of its current value.

Attribute Name: enable-dampening

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</enable-dampening>

</config>

</dampening>

</set-action>

</routemap>

</routemaps>

Command Syntax

set dampening

Configure community with as number

Autonomous system (AS) number and network number entered in the 4-byte new community format. This value is configured with two 2-byte numbers separated by a colon. A number from 1 to 65535 can be entered as each 2-byte number. A single community can be entered or multiple communities can be entered, each separated by a space.

Attribute Name: community-with-as-number

Attribute Type: string

Attribute Name: additive-set

Attribute Type: empty

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

</additive-set>

<community-with-as-number>AA:NN</community-with-as-number>

</config>

</communities>

</set-action>

</routemap>

</routemaps>

Command Syntax

set community-additive .AA:NN

Configure large community number set

use this attribute to set a large community

Attribute Name: large-community-number-set

Attribute Type: string

Attribute Range: 1-255

Attribute Name: additive-type

Attribute Type: enum (no-additive|additive)

Netconf edit-config payload

<sequence-id>1</sequence-id>

<sequence-id>1</sequence-id>

<routemap-name>WORD</routemap-name>

</config>

<routemap-name>WORD</routemap-name>

<set-action>

<large-communities>

<large-community>

<large-community-number-set>AAaa:NNnn:ZZzz</large-community-number-set>

<large-community-number-set>XXX:YYYY:ZZZ</large-community-number-set>

<additive-type>no-additive</additive-type>

</config>

</large-community>

</large-communities>

</set-action>

</routemap>

</routemaps>

Command Syntax

set large-community .AAaa:NNnn:ZZzz ((additive)|)

IPI-DCB

Configure dcb enabled

Enable Data-Center-Bridging

This command is supported when following feature are enabled DCB feature

Attribute Name: dcb-enabled

Attribute Type: boolean

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

<dcb-enabled>true</dcb-enabled>

</bridge>

</bridges>

</dcb>

Command Syntax

data-center-bridging enable bridge <1-32>

Configure bridge id

Enable Data-Center-Bridging

This command is supported when following feature are enabled DCB feature

Attribute Name: dcb-enabled

Attribute Type: boolean

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

<dcb-enabled>true</dcb-enabled>

</bridge>

</bridges>

</dcb>

Command Syntax

data-center-bridging disable bridge <1-32>

Configure enable ets

Enhanced-Transmission-Selection

This command is supported when following feature are enabled DCB feature

Attribute Name: enable-ets

Attribute Type: uint8

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

</enable-ets>

</bridge>

</bridges>

</dcb>

Command Syntax

enhanced-transmission-selection enable bridge <1-32>

Configure enable application priority

enable Application-Priority

This command is supported when following feature are enabled DCB feature

Attribute Name: enable-application-priority

Attribute Type: uint8

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

</enable-application-priority>

</bridge>

</bridges>

</dcb>

Command Syntax

application-priority enable bridge <1-32>

Configure enable pfc

enable Priority-Flow-Control

This command is supported when following feature are enabled DCB feature

Attribute Name: enable-pfc

Attribute Type: empty

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

</enable-pfc>

</bridge>

</bridges>

</dcb>

Command Syntax

priority-flow-control enable bridge <1-32>

Configure enabled

Use this attribute to enable QCN for a bridge

This command is supported when following feature are enabled DCB feature

Attribute Name: enabled

Attribute Type: uint8

Attribute Name: cnm-transmit-priority

Attribute Type: uint8

Default Value: 6

Attribute Range: 0-7

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

<qcn>

<cnm-transmit-priority>0</cnm-transmit-priority>

</enabled>

</config>

</qcn>

</bridge>

</bridges>

</dcb>

Command Syntax

qcn enable bridge <1-32> (cnm-transmit-priority <0-7>|)

Configure priority value

Use this attribute to configure cnpv defense priority value

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: qcn-mode

Attribute Type: enum (admin|auto|component)

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

<qcn>

<cnpv-defenses>

<cnpv-defense>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<qcn-mode>admin</qcn-mode>

</config>

</cnpv-defense>

</cnpv-defenses>

</qcn>

</bridge>

</bridges>

</dcb>

Command Syntax

defense-mode cnpv <0-7> (auto)

Configure qcn mode

Use this attribute to configure cnpv defense priority value

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: qcn-mode

Attribute Type: enum (admin|auto|component)

Attribute Name: admin-defense-mode

Attribute Type: enum (disabled|interior|interior-ready|edge)

Attribute Name: alternate-priority

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<bridge-id>1</bridge-id>

<bridge-id>1</bridge-id>

</config>

<qcn>

<cnpv-defenses>

<cnpv-defense>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<qcn-mode>admin</qcn-mode>

<admin-defense-mode>disabled</admin-defense-mode>

<alternate-priority>0</alternate-priority>

</config>

</cnpv-defense>

</cnpv-defenses>

</qcn>

</bridge>

</bridges>

</dcb>

Command Syntax

defense-mode cnpv <0-7> (admin) (disabled|interior|interior-ready|edge) alternate-priority <0-7>

Configure enable

This attribute enables debugging for DCB

This command is supported when following feature are enabled DCB feature

Attribute Name: enable

Attribute Type: uint8

Netconf edit-config payload

<debug>

</enable>

</config>

</debug>

</dcb>

Command Syntax

debug dcb on

IPI-DCB-INTERFACE

Configure pfc mode

Enable Data-Center-Bridging

This command is supported when following feature are enabled DCB feature

Attribute Name: pfc-mode

Attribute Type: enum (on|auto)

Netconf edit-config payload

</config>

<pfc-mode>on</pfc-mode>

</interface>

</interfaces>

</dcb>

Command Syntax

priority-flow-control mode (on|auto)

Configure ets mode

Use this attribute to set Enhanced Transmission Selection mode

This command is supported when following feature are enabled DCB feature

Attribute Name: ets-mode

Attribute Type: enum (on|auto)

Netconf edit-config payload

</config>

<ets-mode>on</ets-mode>

</interface>

</interfaces>

</dcb>

Command Syntax

enhanced-transmission-selection mode (on|auto)

Configure priority value

Use this attribute to configure cnpv defense priority value

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: qcn-mode

Attribute Type: enum (admin|auto|component)

Netconf edit-config payload

</config>

<qcn>

<cnpv-defenses>

<cnpv-defense>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<qcn-mode>admin</qcn-mode>

</config>

</cnpv-defense>

</cnpv-defenses>

</qcn>

</interface>

</interfaces>

</dcb>

Command Syntax

defense-mode cnpv <0-7> (auto|component)

Configure name

Use this attribute to configure cnpv defense priority value

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: qcn-mode

Attribute Type: enum (admin|auto|component)

Attribute Name: admin-defense-mode

Attribute Type: enum (disabled|interior|interior-ready|edge)

Attribute Name: alternate-priority

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

</config>

<qcn>

<cnpv-defenses>

<cnpv-defense>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<qcn-mode>admin</qcn-mode>

<admin-defense-mode>disabled</admin-defense-mode>

<alternate-priority>0</alternate-priority>

</config>

</cnpv-defense>

</cnpv-defenses>

</qcn>

</interface>

</interfaces>

</dcb>

Command Syntax

defense-mode cnpv <0-7> (admin) (disabled|interior|interior-ready|edge) alternate-priority <0-7>

Configure cnpv value

Use this attribute to configure cnpv value

This command is supported when following feature are enabled DCB feature

Attribute Name: cnpv-value

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: sample-base

Attribute Type: uint32

Attribute Range: 1024-10240

Attribute Name: weight

Attribute Type: int8

Netconf edit-config payload

</config>

<qcn>

<congestion-points>

<congestion-point>

<cnpv-value>0</cnpv-value>

<cnpv-value>0</cnpv-value>

<sample-base>1024</sample-base>

<weight>WEIGHT</weight>

</config>

</congestion-point>

</congestion-points>

</qcn>

</interface>

</interfaces>

</dcb>

Command Syntax

cp enable cnpv <0-7> (sample-base <1024-10240>|) (weight WEIGHT|)

Configure weight

Use this attribute to configure weight

This command is supported when following feature are enabled DCB feature

Attribute Name: weight

Attribute Type: int8

Attribute Name: sample-base

Attribute Type: uint32

Attribute Range: 1024-10240

Netconf edit-config payload

</config>

<qcn>

<congestion-points>

<congestion-point>

<cnpv-value>0</cnpv-value>

<cnpv-value>0</cnpv-value>

<sample-base>1024</sample-base>

</config>

<weight>WEIGHT</weight>

</congestion-point>

</congestion-points>

</qcn>

</interface>

</interfaces>

</dcb>

Command Syntax

cp enable cnpv <0-7> (sample-base <1024-10240>|) (weight WEIGHT|)

Configure accept peer config

Use this attribute to accept peer configuration

This command is supported when following feature are enabled DCB feature

Attribute Name: accept-peer-config

Attribute Type: empty

Netconf edit-config payload

</config>

<priority-flow-control>

</accept-peer-config>

</config>

</priority-flow-control>

</interface>

</interfaces>

</dcb>

Command Syntax

priority-flow-control accept-peer-config

Configure advertise local config

Use this attribute to advertise local configuration to peer

This command is supported when following feature are enabled DCB feature

Attribute Name: advertise-local-config

Attribute Type: empty

Netconf edit-config payload

</config>

<priority-flow-control>

</advertise-local-config>

</config>

</priority-flow-control>

</interface>

</interfaces>

</dcb>

Command Syntax

priority-flow-control advertise-local-config

Configure cap

Use this attribute to set cap value

This command is supported when following feature are enabled DCB feature

Attribute Name: cap

Attribute Type: uint8

Attribute Range: 0-8

Netconf edit-config payload

</config>

<priority-flow-control>

</config>

</priority-flow-control>

</interface>

</interfaces>

</dcb>

Command Syntax

priority-flow-control cap <0-8>

Configure link delay allowance

Use this attribute to set link delay allowance

This command is supported when following feature are enabled DCB feature

Attribute Name: link-delay-allowance

Attribute Type: uint32

Attribute Range: 0-8388608

Netconf edit-config payload

</config>

<priority-flow-control>

</config>

</priority-flow-control>

</interface>

</interfaces>

</dcb>

Command Syntax

priority-flow-control link-delay-allowance <0-8388608>

Configure enhanced-transmission-selection advertise-local-config

Use this attribute to advertise local configuration to peer

This command is supported when following feature are enabled DCB feature

Attribute Name: advertise-local-config

Attribute Type: empty

Netconf edit-config payload

</config>

<enhanced-transmission-selection>

</advertise-local-config>

</config>

</enhanced-transmission-selection>

</interface>

</interfaces>

</dcb>

Command Syntax

enhanced-transmission-selection advertise-local-config

Configure enhanced-transmission-selection accept-peer-config

Use this attribute to accept peer configuration

This command is supported when following feature are enabled DCB feature

Attribute Name: accept-peer-config

Attribute Type: empty

Netconf edit-config payload

</config>

<enhanced-transmission-selection>

</accept-peer-config>

</config>

</enhanced-transmission-selection>

</interface>

</interfaces>

</dcb>

Command Syntax

enhanced-transmission-selection accept-peer-config

Configure max traffic class groups

Use this attrribute to set maximum traffic class groups

This command is supported when following feature are enabled DCB feature

Attribute Name: max-traffic-class-groups

Attribute Type: uint8

Attribute Range: 0-2

Netconf edit-config payload

</config>

<enhanced-transmission-selection>

<max-traffic-class-groups>0</max-traffic-class-groups>

</config>

</enhanced-transmission-selection>

</interface>

</interfaces>

</dcb>

Command Syntax

max-traffic-class-group <0-2>

Configure bandwidth percentage

Use this attrribute to set bandwidth percentage

This command is supported when following feature are enabled DCB feature

Attribute Name: bandwidth-percentage

Attribute Type: uint8

Attribute Range: 0-100

Netconf edit-config payload

</config>

<enhanced-transmission-selection>

<traffic-class-groups>

<traffic-class-group>

<group-index>0</group-index>

<group-index>0</group-index>

</config>

<bandwidth-percentage>0</bandwidth-percentage>

</traffic-class-group>

</traffic-class-groups>

</enhanced-transmission-selection>

</interface>

</interfaces>

</dcb>

Command Syntax

bandwidth-percentage <0-1> <0-100>

Configure enabled

Use this attribute to enable application priority

This command is supported when following feature are enabled DCB feature

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

</config>

<application-priority>

</enabled>

</config>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

application-priority enable

Configure application-priority advertise-local-config

Use this attribute to advertise local configuration to peer

This command is supported when following feature are enabled DCB feature

Attribute Name: advertise-local-config

Attribute Type: empty

Netconf edit-config payload

</config>

<application-priority>

</advertise-local-config>

</config>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

application-priority advertise-local-config

Configure protocol type

Use this attribute to set priority value

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

</config>

<application-priority>

<port-mappings>

<port-mapping>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<port-number>1</port-number>

<protocol-type>tcp</protocol-type>

</config>

<port-number>1</port-number>

<protocol-type>tcp</protocol-type>

</port-mapping>

</port-mappings>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

(tcp|udp|both-tcp-udp) port-no <1-1023> priority <0-7>

Configure service name

Use this attribute to set priority value of service map

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

</config>

<application-priority>

<service-mappings>

<service-mapping>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<service-name>PROTOSERV</service-name>

<protocol-type>tcp</protocol-type>

</config>

<service-name>PROTOSERV</service-name>

<protocol-type>tcp</protocol-type>

</service-mapping>

</service-mappings>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

(tcp|udp|both-tcp-udp) service-name PROTOSERV priority <0-7>

Configure ether name

Use this attribute to configure priority

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

</config>

<application-priority>

<ethertype-name-mappings>

<ethertype-name-mapping>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<ether-name>ETHERNAME</ether-name>

</config>

<ether-name>ip</ether-name>

</ethertype-name-mapping>

</ethertype-name-mappings>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

Configure ether value

Use this attribute to configure priority

This command is supported when following feature are enabled DCB feature

Attribute Name: priority-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

</config>

<application-priority>

<ethertype-value-mappings>

<ethertype-value-mapping>

<priority-value>0</priority-value>

<priority-value>0</priority-value>

<ether-value>ETHERTYPE</ether-value>

</config>

<ether-value>ETHERTYPE</ether-value>

</ethertype-value-mapping>

</ethertype-value-mappings>

</application-priority>

</interface>

</interfaces>

</dcb>

Command Syntax

ethertype value ETHERTYPE priority <0-7>

IPI-RIP

Configure options

This attribute enables debugging for RIP

Attribute Name: options

Netconf edit-config payload

<debug>

</config>

</debug>

</rip>

Command Syntax

Configure split horizon

Use this attribute to controls RIP split-horizon processing on the specified interface.

Attribute Name: split-horizon

Attribute Type: boolean

Netconf edit-config payload

</config>

<split-horizon>true</split-horizon>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip split-horizon

Configure name

Use this attribute to controls RIP split-horizon processing on the specified interface.

Attribute Name: split-horizon

Attribute Type: boolean

Netconf edit-config payload

</config>

<split-horizon>true</split-horizon>

</interface>

</interfaces>

</rip>

Command Syntax

no ip rip split-horizon

Configure disable receive packet

Use this attribute to configure the interface to enable/disable the reception of RIP packets

Attribute Name: disable-receive-packet

Attribute Type: uint8

Netconf edit-config payload

</config>

</disable-receive-packet>

</interface>

</interfaces>

</rip>

Command Syntax

no ip rip receive-packet

Configure disable send packet

Use this attribute to enable/disable sending RIP packets through current interface

Attribute Name: disable-send-packet

Attribute Type: uint8

Netconf edit-config payload

</config>

</disable-send-packet>

</interface>

</interfaces>

</rip>

Command Syntax

no ip rip send-packet

Configure receive version

Use this attribute to receive specified version of RIP packets on an interface

Attribute Name: receive-version

Attribute Type: enum (1|2|1 2|1-compatible)

Netconf edit-config payload

</config>

<receive-version>1</receive-version>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip receive version (1|2|1 2)

Configure send version

Use this attribute to set the version of RIP packets which can be sent from an interface

Attribute Name: send-version

Attribute Type: enum (1|2|1 2|1-compatible)

Netconf edit-config payload

</config>

<send-version>1</send-version>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip send version (1|2|1 2|1-compatible)

Configure auth mode

Use this attrbute to set the type of authentication mode used for RIP packets

Attribute Name: auth-mode

Attribute Type: enum (text|md5)

Netconf edit-config payload

</config>

<auth-mode>text</auth-mode>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip authentication mode (text|md5)

Configure auth string

Use this attribute to set the authentication string or password used by a key

Attribute Name: auth-string

Attribute Type: string

Netconf edit-config payload

</config>

<auth-string>LINE</auth-string>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip authentication string LINE

Configure auth keychain

Use this attribute to enable RIP authentication on an interface and specify the name of the key chain to be used

Attribute Name: auth-keychain

Attribute Type: string

Netconf edit-config payload

</config>

<auth-keychain>LINE</auth-keychain>

</interface>

</interfaces>

</rip>

Command Syntax

ip rip authentication key-chain LINE

Configure rip enabled

Use this attribute enable a RIP routing process

Attribute Name: rip-enabled

Attribute Type: uint8

Netconf edit-config payload

</rip-enabled>

</config>

</instance>

</rip>

Command Syntax

router rip

Configure bfd enable

This feature indicates that the RIP implementation on the system supports BFD

Attribute Name: bfd-enable

Attribute Type: empty

Netconf edit-config payload

</bfd-enable>

</config>

</instance>

</rip>

Command Syntax

bfd all-interfaces

Configure receive buffer size

Use this attribute to set the RIP UDP receive-buffer size.

Attribute Name: receive-buffer-size

Attribute Type: uint32

Default Value: 32768

Attribute Range: 8192-2147483647

Netconf edit-config payload

<receive-buffer-size>8192</receive-buffer-size>

</config>

</instance>

</rip>

Command Syntax

recv-buffer-size <8192-2147483647>

Configure passive interfaces

Disables sending of RIP packets on the specified interface

Attribute Name: passive-interfaces

Attribute Type: string

Netconf edit-config payload

<passive-interfaces>IFNAME</passive-interfaces>

</config>

</instance>

</rip>

Command Syntax

passive-interface IFNAME

Configure static routes

Use this attribute to set static RIP routes

Attribute Name: static-routes

Attribute Type: string

Netconf edit-config payload

<static-routes>A.B.C.D/M</static-routes>

</config>

</instance>

</rip>

Command Syntax

route A.B.C.D/M

Configure neighbors

Specifies the RIP neighbors

Attribute Name: neighbors

Attribute Type: inet:ipv4-address

Netconf edit-config payload

</config>

</instance>

</rip>

Command Syntax

neighbor A.B.C.D

Configure neighbor fall over bfd

Specified the BFD neighbors

Attribute Name: neighbor-fall-over-bfd

Attribute Type: inet:ipv4-address

Netconf edit-config payload

<neighbor-fall-over-bfd>A.B.C.D</neighbor-fall-over-bfd>

</config>

</instance>

</rip>

Command Syntax

neighbor A.B.C.D fall-over bfd

Configure enable cisco metric behavior

Use this attribute to set metric updation behavior as Cisco

Attribute Name: enable-cisco-metric-behavior

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<enable-cisco-metric-behavior>disable</enable-cisco-metric-behavior>

</config>

</instance>

</rip>

Command Syntax

cisco-metric-behavior (disable|enable)

Configure default metric

Set the default metric

Attribute Name: default-metric

Attribute Type: uint8

Default Value: 1

Attribute Range: 1-15

Netconf edit-config payload

<default-metric>1</default-metric>

</config>

</instance>

</rip>

Command Syntax

default-metric <1-15>

Configure version

Use this attribute to set version of routing protocol

Attribute Name: version

Attribute Type: uint8

Default Value: 2

Attribute Range: 1-2

Netconf edit-config payload

</config>

</instance>

</rip>

Command Syntax

version <1-2>

Configure distance

Use this attribute to set administrative distance of the RIP for the current RIP instance

Attribute Name: distance

Attribute Type: uint8

Default Value: 120

Attribute Range: 1-255

Netconf edit-config payload

</config>

</instance>

</rip>

Command Syntax

distance <1-255>

Configure network interfaces

Use this attribute to enable routing on an interface

Attribute Name: network-interfaces

Attribute Type: string

Netconf edit-config payload

<network-interfaces>IFNAME</network-interfaces>

</config>

</instance>

</rip>

Command Syntax

network IFNAME

Configure network routes

Use this attribute to enable routing on an IP network

Attribute Name: network-routes

Attribute Type: string

Netconf edit-config payload

<network-routes>A.B.C.D/M</network-routes>

</config>

</instance>

</rip>

Command Syntax

network A.B.C.D/M

Configure access list name

Use this attribute to set the access list name

Attribute Name: access-list-name

Attribute Type: string

Attribute Name: distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<source-prefix>A.B.C.D/M</source-prefix>

<source-prefix>A.B.C.D/M</source-prefix>

</config>

<access-list-name>WORD</access-list-name>

</distance>

</distances>

</instance>

</rip>

Command Syntax

distance <1-255> A.B.C.D/M (WORD|)

Configure route table update interval

Interval at which RIP updates are sent

Attribute Name: route-table-update-interval

Attribute Type: uint32

Attribute Range: 5-2147483647

Attribute Name: route-info-timeout-interval

Attribute Type: uint32

Attribute Range: 5-2147483647

Attribute Name: garbage-collection-interval

Attribute Type: uint32

Attribute Range: 5-2147483647

Netconf edit-config payload

<route-info-timeout-interval>5</route-info-timeout-interval>

<garbage-collection-interval>5</garbage-collection-interval>

<route-table-update-interval>5</route-table-update-interval>

</config>

</timers>

</instance>

</rip>

Command Syntax

timers basic <5-2147483647> <5-2147483647> <5-2147483647>

Configure warning threshold percentage

Use this attribute to set the percentage of maximum routes to generate a warning

Attribute Name: warning-threshold-percentage

Attribute Type: uint32

Attribute Range: 1-100

Attribute Name: max-routes

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<maximum-prefix>

<max-routes>1</max-routes>

<warning-threshold-percentage>1</warning-threshold-percentage>

</config>

</maximum-prefix>

</instance>

</rip>

Command Syntax

maximum-prefix <1-65535> (<1-100>|)

Configure route type

Use this attribute to redistributes only specified route-type routes matching the specified route type into the RIP routing instance

Attribute Name: route-type

Attribute Type: enum (connected|static|ospf|isis|bgp)

Netconf edit-config payload

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

</redistribute-policy>

</redistribute-policies>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|isis|bgp)

Configure route map

Use this attribute to set th route-map

Attribute Name: route-map

Attribute Type: string

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Netconf edit-config payload

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

<route-map>WORD</route-map>

</redistribute-policy>

</redistribute-policies>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|isis|bgp) metric <0-16> route-map WORD

Configure metric

Metric used for the redistributed route

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Netconf edit-config payload

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

</redistribute-policy>

</redistribute-policies>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|isis|bgp) metric <0-16>

Configure redistribute-policy route-map

Use this attribute to set th route-map

Attribute Name: route-map

Attribute Type: string

Netconf edit-config payload

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

<route-map>WORD</route-map>

</redistribute-policy>

</redistribute-policies>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|isis|bgp) route-map WORD

Configure originate

Use this attribute to apply conditions of the route policy to the default route

Attribute Name: route-map

Attribute Type: string

Attribute Name: originate

Attribute Type: empty

Attribute Name: always-advertise

Attribute Type: empty

Netconf edit-config payload

<default-information>

</originate>

</always-advertise>

<route-map>WORD</route-map>

</config>

</default-information>

</instance>

</rip>

Command Syntax

default-information originate (always|) (route-map WORD|)

Configure direction

Use this attribute to set the metric value of routing protocol

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<offset-lists>

<offset-list>

<access-list-name>WORD</access-list-name>

</config>

</offset-list>

</offset-lists>

</instance>

</rip>

Command Syntax

offset-list WORD (in|out) <0-16>

Configure distribute-filter-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<distribute-filter-lists>

<distribute-filter-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-filter-list>

</distribute-filter-lists>

</instance>

</rip>

Command Syntax

distribute-list WORD (in|out)

Configure distribute-prefix-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<distribute-prefix-lists>

<distribute-prefix-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-prefix-list>

</distribute-prefix-lists>

</instance>

</rip>

Command Syntax

distribute-list prefix WORD (in|out)

Configure offset-list metric

Use this attribute to set the metric value of routing protocol

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<offset-lists>

<offset-list>

<access-list-name>WORD</access-list-name>

</config>

</offset-list>

</offset-lists>

</interface>

</interfaces>

</instance>

</rip>

Command Syntax

offset-list WORD (in|out) <0-16> IFNAME

Configure distribute-filter-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<distribute-filter-lists>

<distribute-filter-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-filter-list>

</distribute-filter-lists>

</interface>

</interfaces>

</instance>

</rip>

Command Syntax

distribute-list WORD (in|out) IFNAME

Configure distribute-prefix-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<distribute-prefix-lists>

<distribute-prefix-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-prefix-list>

</distribute-prefix-lists>

</interface>

</interfaces>

</instance>

</rip>

Command Syntax

distribute-list prefix WORD (in|out) IFNAME

clear ip rip route (connected|static|ospf|isis|bgp|rip|all)

Attribute Name: route-type

Attribute Type: enum (connected|static|ospf|isis|bgp|rip|all)

Netconf RPC payload

<rip-clear-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<route-type>connected</route-type>

</rip-clear-route>

Command Syntax

clear ip rip route (connected|static|ospf|isis|bgp|rip|all)

clear ip rip route A.B.C.D/M

Attribute Name: prefix-address

Attribute Type: string

Netconf RPC payload

<rip-clear-route-prefix xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<prefix-address>A.B.C.D/M</prefix-address>

</rip-clear-route-prefix>

Command Syntax

clear ip rip route A.B.C.D/M

clear ip rip statistics (IFNAME|)

Attribute Name: name

Attribute Type: string

Default Value: NULL

Netconf RPC payload

<rip-clear-statistics xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<name>IFNAME</name>

</rip-clear-statistics>

Command Syntax

clear ip rip statistics (IFNAME|)

snmp restart rip

Netconf RPC payload

<rip-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip"/>

Command Syntax

snmp restart rip

Attribute Name: terminal-debug-options

Netconf RPC payload

<rip-terminal-debugging-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<terminal-debug-options>all</terminal-debug-options>

</rip-terminal-debugging-on>

Command Syntax

Attribute Name: terminal-debug-options

Netconf RPC payload

<rip-terminal-debugging-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<terminal-debug-options>all</terminal-debug-options>

</rip-terminal-debugging-off>

Command Syntax

IPI-RIP-VRF

Configure vrf name

VRF name

Attribute Name: vrf-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

address-family ipv4 vrf NAME

Configure enable cisco metric behavior

Use this attribute to set metric updation behavior as Cisco

Attribute Name: enable-cisco-metric-behavior

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<enable-cisco-metric-behavior>disable</enable-cisco-metric-behavior>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

cisco-metric-behavior (disable|enable)

Configure default metric

Set the default metric

Attribute Name: default-metric

Attribute Type: uint8

Default Value: 1

Attribute Range: 1-15

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<default-metric>1</default-metric>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

default-metric <1-15>

Configure version

Use this attribute to set version of routing protocol

Attribute Name: version

Attribute Type: uint8

Default Value: 2

Attribute Range: 1-2

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

version <1-2>

Configure distance

Use this attribute to set administrative distance of the RIP for the current RIP instance

Attribute Name: distance

Attribute Type: uint8

Default Value: 120

Attribute Range: 1-255

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distance <1-255>

Configure network interfaces

Use this attribute to enable routing on an interface

Attribute Name: network-interfaces

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<network-interfaces>IFNAME</network-interfaces>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

network IFNAME

Configure network routes

Use this attribute to enable routing on an IP network

Attribute Name: network-routes

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<network-routes>A.B.C.D/M</network-routes>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

network A.B.C.D/M

Configure access list name

Use this attribute to set the access list name

Attribute Name: access-list-name

Attribute Type: string

Attribute Name: distance

Attribute Type: uint8

Attribute Range: 1-255

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<source-prefix>A.B.C.D/M</source-prefix>

<source-prefix>A.B.C.D/M</source-prefix>

</config>

<access-list-name>WORD</access-list-name>

</distance>

</distances>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distance <1-255> A.B.C.D/M (WORD|)

Configure route type

Use this attribute to redistributes only specified route-type routes matching the specified route type into the RIP routing instance

Attribute Name: route-type

Attribute Type: enum (connected|static|ospf|bgp)

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

</redistribute-policy>

</redistribute-policies>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|bgp)

Configure route map

Use this attribute to set the name of the route-map

Attribute Name: route-map

Attribute Type: string

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

<route-map>WORD</route-map>

</redistribute-policy>

</redistribute-policies>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|bgp) metric <0-16> route-map WORD

Configure metric

Use this attribute to set the metric used for the redistributed route

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

</redistribute-policy>

</redistribute-policies>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|bgp) metric <0-16>

Configure redistribute-policy route-map

Use this attribute to set the name of the route-map

Attribute Name: route-map

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<redistribute-policies>

<redistribute-policy>

<route-type>connected</route-type>

<route-type>connected</route-type>

</config>

<route-map>WORD</route-map>

</redistribute-policy>

</redistribute-policies>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

redistribute (connected|static|ospf|bgp) route-map WORD

Configure originate

Use this attribute to apply conditions of the route policy to the default route

Attribute Name: route-map

Attribute Type: string

Attribute Name: originate

Attribute Type: empty

Attribute Name: always-advertise

Attribute Type: empty

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<default-information>

</originate>

</always-advertise>

<route-map>WORD</route-map>

</config>

</default-information>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

default-information originate (always|) (route-map WORD|)

Configure direction

Use this attribute to set the metric value of routing protocol

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<offset-lists>

<offset-list>

<access-list-name>WORD</access-list-name>

</config>

</offset-list>

</offset-lists>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

offset-list WORD (in|out) <0-16>

Configure distribute-filter-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<distribute-filter-lists>

<distribute-filter-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-filter-list>

</distribute-filter-lists>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distribute-list WORD (in|out)

Configure distribute-prefix-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<distribute-prefix-lists>

<distribute-prefix-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-prefix-list>

</distribute-prefix-lists>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distribute-list prefix WORD (in|out)

Configure name

Use this attribute to set the metric value of routing protocol

Attribute Name: metric

Attribute Type: uint8

Attribute Range: 0-16

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<offset-lists>

<offset-list>

<access-list-name>WORD</access-list-name>

</config>

</offset-list>

</offset-lists>

</interface>

</interfaces>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

offset-list WORD (in|out) <0-16> IFNAME

Configure distribute-filter-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<distribute-filter-lists>

<distribute-filter-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-filter-list>

</distribute-filter-lists>

</interface>

</interfaces>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distribute-list WORD (in|out) IFNAME

Configure distribute-prefix-list direction

Use this attribute to set direction of the routing updates

Attribute Name: direction

Attribute Type: enum (in|out)

Attribute Name: access-list-name

Attribute Type: string

Netconf edit-config payload

<vrfs>

<vrf>

<vrf-name>NAME</vrf-name>

<vrf-name>WORD</vrf-name>

</config>

<name>IFNAME</name>

<name>IFNAME</name>

</config>

<distribute-prefix-lists>

<distribute-prefix-list>

<access-list-name>WORD</access-list-name>

</config>

</distribute-prefix-list>

</distribute-prefix-lists>

</interface>

</interfaces>

</vrf>

</vrfs>

</instance>

</rip>

Command Syntax

distribute-list prefix WORD (in|out) IFNAME

clear ip rip route vrf NAME A.B.C.D/M

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: prefix

Attribute Type: string

Netconf RPC payload

<ipi-rip-vrf_rip-vrf-clear-route xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<vrf-name>NAME</vrf-name>

</ipi-rip-vrf_rip-vrf-clear-route>

Command Syntax

clear ip rip route vrf NAME A.B.C.D/M

clear ip rip route vrf NAME *

Attribute Name: vrf-name

Attribute Type: string

Netconf RPC payload

<ipi-rip-vrf_rip-vrf-clear-route-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-rip">

<vrf-name>NAME</vrf-name>

</ipi-rip-vrf_rip-vrf-clear-route-all>

Command Syntax

clear ip rip route vrf NAME *

IPI-SNMP

Configure enable link down trap

Use this attribute to enable or disable SNMP linkdown traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-down-trap

Attribute Type: boolean

Attribute Name: enable-link-up-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-up-trap>true</enable-link-up-trap>

<enable-link-down-trap>true</enable-link-down-trap>

</config>

</server-traps>

</snmp>

Command Syntax

snmp-server enable traps link

Configure enable link up trap

Use this attribute to enable or disable SNMP linkdown traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-down-trap

Attribute Type: boolean

Attribute Name: enable-link-up-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-up-trap>true</enable-link-up-trap>

<enable-link-down-trap>true</enable-link-down-trap>

</config>

</server-traps>

</snmp>

Command Syntax

no snmp-server enable traps link

Configure include interface name

Use this attribute to include ifname with SNMP linkdown traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: include-interface-name

Attribute Type: uint8

Netconf edit-config payload

<server-traps>

</include-interface-name>

</config>

</server-traps>

</snmp>

Command Syntax

snmp-server enable traps link include-interface-name

Configure server-traps enable-link-down-trap

Use this attribute to enable or disable SNMP linkdown traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-down-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-down-trap>true</enable-link-down-trap>

</config>

</server-traps>

</snmp>

Command Syntax

snmp-server enable traps link linkDown

Configure server-traps enable-link-down-trap

Use this attribute to enable or disable SNMP linkdown traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-down-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-down-trap>true</enable-link-down-trap>

</config>

</server-traps>

</snmp>

Command Syntax

no snmp-server enable traps link linkDown

Configure server-traps enable-link-up-trap

Use this attribute to enable or disable SNMP linkup traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-up-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-up-trap>true</enable-link-up-trap>

</config>

</server-traps>

</snmp>

Command Syntax

snmp-server enable traps link linkUp

Configure server-traps enable-link-up-trap

Use this attribute to enable or disable SNMP linkup traps.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-link-up-trap

Attribute Type: boolean

Netconf edit-config payload

<server-traps>

<enable-link-up-trap>true</enable-link-up-trap>

</config>

</server-traps>

</snmp>

Command Syntax

no snmp-server enable traps link linkUp

Configure enable traps

Use this attribute to enable or disable SNMP traps and inform requests.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-traps

Netconf edit-config payload

<server-traps>

<enable-traps>snmp authentication</enable-traps>

</config>

</server-traps>

</snmp>

Command Syntax

Configure enable trap cache

Enables trap caching

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: enable-trap-cache

Attribute Type: empty

Netconf edit-config payload

<server-traps>

<trap-cache>

</enable-trap-cache>

</config>

</trap-cache>

</server-traps>

</snmp>

Command Syntax

snmp-server trap-cache

Configure timeout

Sets timeout before sending traps

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: timeout

Attribute Type: int8

Default Value: 10

Attribute Range: 1-20

Netconf edit-config payload

<server-traps>

<trap-cache>

</config>

</trap-cache>

</server-traps>

</snmp>

Command Syntax

timeout <1-20>

Configure disable ping

Disables pings to check host reachability

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: disable-ping

Attribute Type: empty

Netconf edit-config payload

<server-traps>

<trap-cache>

</disable-ping>

</config>

</trap-cache>

</server-traps>

</snmp>

Command Syntax

disable-ping

Configure max count

Sets the maximum number of traps that can be cached

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: max-count

Attribute Type: int16

Default Value: 200

Attribute Range: 1-500

Netconf edit-config payload

<server-traps>

<trap-cache>

<max-count>1</max-count>

</config>

</trap-cache>

</server-traps>

</snmp>

Command Syntax

max-count <1-500>

Attribute Name: debug

Netconf RPC payload

<snmp-agentx-enable-terminal-debugging xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp">

</snmp-agentx-enable-terminal-debugging>

Command Syntax

Attribute Name: debug

Netconf RPC payload

<snmp-agentx-disable-terminal-debugging xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp">

</snmp-agentx-disable-terminal-debugging>

Command Syntax

IPI-SNMP-SERVER

Configure vrf name

VRF name associated with this instance.

Attribute Name: vrf-name

Attribute Type: string

Attribute Name: enabled

Attribute Type: empty

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</enabled>

</config>

</server>

</servers>

</snmp>

Command Syntax

snmp-server enable snmp (vrf (NAME|management)|)

Configure system contact

Use this attribute to set the system contact information for the device (sysContact object)

Attribute Name: system-contact

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<system-contact>LINE</system-contact>

</config>

</global>

</server>

</servers>

</snmp>

Command Syntax

snmp-server contact (vrf (NAME|management)|) LINE

Configure system location

Use this attribute to set the physical location information of the device (sysLocation object)

Attribute Name: system-location

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<system-location>LINE</system-location>

</config>

</global>

</server>

</servers>

</snmp>

Command Syntax

snmp-server location (vrf (NAME|management)|) LINE

Configure tcp session enabled

Use this attribute to start the SNMP agent daemon over TCP

Attribute Name: tcp-session-enabled

Attribute Type: empty

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

</tcp-session-enabled>

</config>

</global>

</server>

</servers>

</snmp>

Command Syntax

snmp-server tcp-session (vrf (NAME|management)|)

Configure disable default instance

Use this attribute to prevent default snmp instance from being enabled at start up

Attribute Name: disable-default-instance

Attribute Type: empty

Netconf edit-config payload

<default-instance>

</disable-default-instance>

</config>

</default-instance>

</servers>

</snmp>

Command Syntax

snmp-server disable-default

Configure ent ipi iftable

Use this attribute to enable separate logical/physical interface tables

Attribute Name: ent-ipi-iftable

Attribute Type: empty

Netconf edit-config payload

</ent-ipi-iftable>

</config>

</custom>

Command Syntax

snmp ent-ipi-iftable

IPI-SNMP-SERVER-EXTENDED

Configure include directive

Use this attribute to create and include extension directory for snmp-dir

Attribute Name: include-directive

Attribute Type: empty

Netconf edit-config payload

<snmp-dir xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

</include-directive>

</config>

</snmp-dir>

Command Syntax

snmp-server include-directive

Configure enable

Use this attribute to enable/disable SNMP server debugging

Attribute Name: enable

Attribute Type: empty

Netconf edit-config payload

</enable>

</config>

</debug>

</servers>

</snmp>

Command Syntax

debug snmp-server

Configure filter type

Use this attribute to update oid tree filter type for a view entry.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: filter-type

Attribute Type: enum (included|excluded)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<snmp-views xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<snmp-view>

<view-name>VIEW-NAME</view-name>

<view-name>VIEW-NAME</view-name>

</config>

<oid-trees>

<oid-tree>

</config>

<filter-type>included</filter-type>

</oid-tree>

</oid-trees>

</snmp-view>

</snmp-views>

</server>

</servers>

</snmp>

Command Syntax

snmp-server view VIEW-NAME OID-TREE (included|excluded) (vrf (NAME|management)|)

Configure engine id

Use this attribute to configure SNMPv3 engine ID.

This command is supported when following feature are enabled snmp version v3

Attribute Name: engine-id

Attribute Type: string

Attribute Range: 1-24

Netconf edit-config payload

<engine-id xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<engine-id>ENGINE_ID_STR</engine-id>

</config>

</engine-id>

</snmp>

Command Syntax

snmp-server engineID ENGINE_ID_STR

Configure smux port enable

Use this attribute to enable smux-port.

Attribute Name: smux-port-enable

Attribute Type: empty

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<smux-port xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

</smux-port-enable>

</config>

</smux-port>

</server>

</servers>

</snmp>

Command Syntax

snmp-server smux-port-enable (vrf (NAME|management)|)

Configure host name

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: notification-type

Attribute Type: enum (traps|informs)

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: community

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<notification-type>traps</notification-type>

<snmp-version>1</snmp-version>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure notification type

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: notification-type

Attribute Type: enum (traps|informs)

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: snmpv3-auth-type

Attribute Type: enum (noauth|auth|priv)

Attribute Name: snmpv3-user

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<notification-type>traps</notification-type>

<snmp-version>1</snmp-version>

<snmpv3-auth-type>noauth</snmpv3-auth-type>

<snmpv3-user>WORD</snmpv3-user>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure snmp version

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: notification-type

Attribute Type: enum (traps|informs)

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: community

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<notification-type>traps</notification-type>

<snmp-version>1</snmp-version>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure snmpv3 auth type

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: notification-type

Attribute Type: enum (traps|informs)

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: snmpv3-auth-type

Attribute Type: enum (noauth|auth|priv)

Attribute Name: snmpv3-user

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<notification-type>traps</notification-type>

<snmp-version>1</snmp-version>

<snmpv3-auth-type>noauth</snmpv3-auth-type>

<snmpv3-user>WORD</snmpv3-user>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure community

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: community

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<snmp-version>1</snmp-version>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure snmpv3 user

Use this attribute to configure an SNMP trap host. An SNMP trap host is usually a network management station (NMS) or an SNMP manager.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-name

Attribute Type: string

Attribute Range: 1-63

Attribute Name: snmp-version

Attribute Type: enum (1|2c|3)

Attribute Name: snmpv3-auth-type

Attribute Type: enum (noauth|auth|priv)

Attribute Name: snmpv3-user

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<snmp-version>1</snmp-version>

<snmpv3-auth-type>noauth</snmpv3-auth-type>

<snmpv3-user>WORD</snmpv3-user>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure host vrf name

SNMP host VRF name associated with this host.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: host-vrf-name

Attribute Type: string

Attribute Name: host-user

Attribute Type: string

Attribute Name: udp-port

Attribute Type: uint32

Attribute Range: 1-65535

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<host>

<host-name>A.B.C.D</host-name>

<host-name>A.B.C.D</host-name>

<host-vrf-name>NAME</host-vrf-name>

<host-user>WORD</host-user>

<udp-port>1</udp-port>

</config>

<host-vrf-name>NAME</host-vrf-name>

</host>

</hosts>

</server>

</servers>

</snmp>

Command Syntax

Configure user name

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<authentication-type>md5</authentication-type>

<encryption-type>1</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD auth (md5|sha) encrypt AUTH-PASSWORD (vrf (NAME|management)|)

Configure authentication type

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<authentication-type>md5</authentication-type>

<encryption-type>0</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD auth (md5|sha) AUTH-PASSWORD (vrf (NAME|management)|)

Configure user type

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: user-type

Attribute Type: union

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<user-type>network-operator</user-type>

<authentication-type>md5</authentication-type>

<encryption-type>1</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

Configure encryption type

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: user-type

Attribute Type: union

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<user-type>network-operator</user-type>

<authentication-type>md5</authentication-type>

<encryption-type>0</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

Configure authentication password

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Attribute Name: privilege-type

Attribute Type: enum (des|aes)

Attribute Name: privilege-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<authentication-type>md5</authentication-type>

<encryption-type>1</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

<privilege-type>des</privilege-type>

<privilege-password>PRIV-PASSWORD</privilege-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD auth (md5|sha) encrypt AUTH-PASSWORD priv (des|aes) PRIV-PASSWORD (vrf (NAME|management)|)

Configure privilege type

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Attribute Name: privilege-type

Attribute Type: enum (des|aes)

Attribute Name: privilege-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<authentication-type>md5</authentication-type>

<encryption-type>0</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

<privilege-type>des</privilege-type>

<privilege-password>PRIV-PASSWORD</privilege-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD auth (md5|sha) AUTH-PASSWORD priv (des|aes) PRIV-PASSWORD (vrf (NAME|management)|)

Configure privilege password

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: user-type

Attribute Type: union

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Attribute Name: privilege-type

Attribute Type: enum (des|aes)

Attribute Name: privilege-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<user-type>network-operator</user-type>

<authentication-type>md5</authentication-type>

<encryption-type>1</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

<privilege-type>des</privilege-type>

<privilege-password>PRIV-PASSWORD</privilege-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

Configure vrf name

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Attribute Name: user-type

Attribute Type: union

Attribute Name: authentication-type

Attribute Type: enum (md5|sha)

Attribute Name: encryption-type

Attribute Type: enum (plain|encrypt)

Attribute Name: authentication-password

Attribute Type: string

Attribute Name: privilege-type

Attribute Type: enum (des|aes)

Attribute Name: privilege-password

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

<user-type>network-operator</user-type>

<authentication-type>md5</authentication-type>

<encryption-type>0</encryption-type>

<authentication-password>AUTH-PASSWORD</authentication-password>

<privilege-type>des</privilege-type>

<privilege-password>PRIV-PASSWORD</privilege-password>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

Configure user user-name

Use this attribute to create an SNMP server user.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-name

Attribute Type: string

Attribute Range: 5-32

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

</config>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD (vrf (NAME|management)|)

Configure user user-type

Use this attribute to create an SNMP server user of specified type.

This command is supported when following feature are enabled SNMP-AGENT feature,snmp version v3

Attribute Name: user-type

Attribute Type: union

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<user>

<user-name>WORD</user-name>

<user-name>WORD</user-name>

</config>

<user-type>network-operator</user-type>

</user>

</users>

</server>

</servers>

</snmp>

Command Syntax

snmp-server user WORD (network-operator|network-admin|WORD) (vrf (NAME|management)|)

Configure context name

Use this attribute to create an SNMP server context

Attribute Name: context-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<context-name>WORD</context-name>

<context-name>WORD</context-name>

</config>

</context>

</contexts>

</server>

</servers>

</snmp>

Command Syntax

snmp-server context WORD (vrf (NAME|management)|)

Configure acl name

Use this attribute to create an SNMP community string and user-acl.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: acl-name

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

</config>

<acl-name>WORD</acl-name>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community WORD use-acl WORD (vrf (NAME|management)|)

Configure community name

Use this attribute to create an SNMP community string and access privileges.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: community-name

Attribute Type: string

Attribute Range: 1-32

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

</config>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community WORD (vrf (NAME|management)|)

Configure snmp group

Use this attribute to create an SNMP community string with group.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: snmp-group

Attribute Type: enum (network-operator|network-admin)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

</config>

<snmp-group>network-operator</snmp-group>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community WORD group (network-operator|network-admin) (vrf (NAME|management)|)

Configure access privileges

Use this attribute to create an SNMP community string and access privileges.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: access-privileges

Attribute Type: enum (ro)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

</config>

<access-privileges>ro</access-privileges>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community WORD (ro) (vrf (NAME|management)|)

Configure access

Use this attribute to set access privileges to this community view.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: access

Attribute Type: enum (ro)

Attribute Name: community-view-name

Attribute Type: string

Attribute Name: version

Attribute Type: enum (v1|v2c)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

<community-view-name>VIEW-NAME</community-view-name>

</config>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community WORD view VIEW-NAME version (v1|v2c) (ro) (vrf (NAME|management)|)

Configure community context

Use this attribute to create an SNMP community string and access privileges.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: community-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: community-context

Attribute Type: string

Attribute Range: 1-32

Attribute Name: community-user

Attribute Type: string

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<community-name>WORD</community-name>

<community-name>WORD</community-name>

</config>

<community-context-mapping>

<community-context>WORD</community-context>

<community-user>WORD</community-user>

</config>

</community-context-mapping>

</community>

</communities>

</server>

</servers>

</snmp>

Command Syntax

snmp-server community-map WORD context WORD user WORD (vrf (NAME|management)|)

Configure group name

Use this attribute to create an SNMP group string.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-version

Attribute Type: enum (1|2c|3)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<server-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-version>1</group-version>

</config>

</server-group>

</server-groups>

</server>

</servers>

</snmp>

Command Syntax

snmp-server group WORD version (1|2c) (vrf (NAME|management)|)

Configure group version

Use this attribute to create an SNMP group string.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-version

Attribute Type: enum (1|2c|3)

Attribute Name: snmpv3-group-auth-type

Attribute Type: enum (auth|priv|noauth)

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<server-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-version>1</group-version>

<snmpv3-group-auth-type>auth</snmpv3-group-auth-type>

</config>

</server-group>

</server-groups>

</server>

</servers>

</snmp>

Command Syntax

snmp-server group WORD version (3) (auth|priv|noauth) (vrf (NAME|management)|)

Configure context

Use this attribute to create an SNMP group string.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-version

Attribute Type: enum (1|2c|3)

Attribute Name: context

Attribute Type: union

Attribute Range: 1-32

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<server-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-version>1</group-version>

</config>

</server-group>

</server-groups>

</server>

</servers>

</snmp>

Command Syntax

snmp-server group WORD version (1|2c) context (all|WORD) (vrf (NAME|management)|)

Configure snmpv3 group auth type

Use this attribute to create an SNMP group string.

This command is supported when following feature are enabled SNMP-AGENT feature

Attribute Name: group-name

Attribute Type: string

Attribute Range: 1-32

Attribute Name: group-version

Attribute Type: enum (1|2c|3)

Attribute Name: snmpv3-group-auth-type

Attribute Type: enum (auth|priv|noauth)

Attribute Name: context

Attribute Type: enum (all)

Attribute Range: 1-32

Netconf edit-config payload

<vrf-name>NAME</vrf-name>

<vrf-name>NAME</vrf-name>

</config>

<server-groups xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended">

<server-group>

<group-name>WORD</group-name>

<group-name>WORD</group-name>

<group-version>1</group-version>

<snmpv3-group-auth-type>auth</snmpv3-group-auth-type>

</config>

</server-group>

</server-groups>

</server>

</servers>

</snmp>

Command Syntax

snmp-server group WORD version (3) (auth|priv|noauth) context <1-32> (all) (vrf (NAME|management)|)

debug snmp-server

Netconf RPC payload

<snmp-server-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended"/>

Command Syntax

debug snmp-server

no debug snmp-server

Netconf RPC payload

<snmp-server-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-snmp-server-extended"/>

Command Syntax

no debug snmp-server

IPI-QOS

Configure enable qos

Use this attribute to globally enable or disable QoS

Attribute Name: enable-qos

Attribute Type: enum (disable|enable)

Netconf edit-config payload

<enable-qos>disable</enable-qos>

</config>

</global>

</qos>

Command Syntax

qos (disable|enable)

Configure name

Use this attribute to set a name to CoS to Traffic-Class profile

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<cos-to-queue-profiles>

<cos-to-queue-profile>

</config>

</cos-to-queue-profile>

</cos-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile cos-to-queue (NAME|default)

Configure color

Use this attribute to select the color CoS DEI is mapped to.

This command is supported when following feature are enabled QoS Mapping Profile feature and following feature are disabled QoS custom options2

Attribute Name: color

Attribute Type: enum (green|yellow|red)

Attribute Name: queue-id

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<cos-to-queue-profiles>

<cos-to-queue-profile>

</config>

<cos-dei-to-queues>

<cos-dei-to-queue>

<dei-value>all</dei-value>

<dei-value>all</dei-value>

<cos-value>0</cos-value>

<queue-id>0</queue-id>

</config>

<cos-value>0</cos-value>

<color>green</color>

</cos-dei-to-queue>

</cos-dei-to-queues>

</cos-to-queue-profile>

</cos-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

cos <0-7> (dei (0|1|all)|) queue <0-7> (color (green|yellow|red)|)

Configure dscp-to-queue-profiles name

Use this attribute to set a name to DSCP to Traffic-Class profile

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<dscp-to-queue-profiles>

<dscp-to-queue-profile>

</config>

</dscp-to-queue-profile>

</dscp-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile dscp-to-queue (NAME|default)

Configure dscp value

Use this attribute to select the color to map.

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: color

Attribute Type: enum (green|yellow|red)

Attribute Name: queue-id

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<dscp-to-queue-profiles>

<dscp-to-queue-profile>

</config>

<dscp-to-queues>

<dscp-to-queue>

<dscp-value>0</dscp-value>

<dscp-value>0</dscp-value>

<queue-id>0</queue-id>

</config>

<color>green</color>

</dscp-to-queue>

</dscp-to-queues>

</dscp-to-queue-profile>

</dscp-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

dscp <0-63> queue <0-7> color (green|yellow|red)

Configure queue id

Use this attribute to select the Traffic-Class DSCP is mapped to

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: queue-id

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<dscp-to-queue-profiles>

<dscp-to-queue-profile>

</config>

<dscp-to-queues>

<dscp-to-queue>

<dscp-value>0</dscp-value>

<dscp-value>0</dscp-value>

</config>

<queue-id>0</queue-id>

</dscp-to-queue>

</dscp-to-queues>

</dscp-to-queue-profile>

</dscp-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

dscp <0-63> queue <0-7>

Configure queue-color-to-cos-profiles name

Use this attribute to select the Traffic-Class color to CoS profile name

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<queue-color-to-cos-profiles>

<queue-color-to-cos-profile>

</config>

</queue-color-to-cos-profile>

</queue-color-to-cos-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile queue-color-to-cos (NAME|default)

Configure cos value

Use this attribute to select the color to map. Default value is 3.

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: color

Attribute Type: enum (green|yellow|red|all)

Attribute Name: cos-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<queue-color-to-cos-profiles>

<queue-color-to-cos-profile>

</config>

<queue-color-to-coses>

<queue-color-to-cos>

<queue-id>0</queue-id>

<cos-value>0</cos-value>

</config>

<queue-id>0</queue-id>

</queue-color-to-cos>

</queue-color-to-coses>

</queue-color-to-cos-profile>

</queue-color-to-cos-profiles>

</map-profile>

</global>

</qos>

Command Syntax

queue <0-7> (color (green|yellow|red|all)|) cos <0-7>

Configure queue-to-precedence-profiles name

Use this attribute to select the Traffic-Class to Precedence profile name

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<queue-to-precedence-profiles>

<queue-to-precedence-profile>

</config>

</queue-to-precedence-profile>

</queue-to-precedence-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile queue-to-precedence NAME

Configure precedence value

Use this attribute to select the Traffic-Class to map

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: queue-id

Attribute Type: uint8

Attribute Range: 0-7

Attribute Name: precedence-value

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<queue-to-precedence-profiles>

<queue-to-precedence-profile>

</config>

<queue-to-precedences>

<queue-to-precedence>

<queue-id>0</queue-id>

<queue-id>0</queue-id>

<precedence-value>0</precedence-value>

</config>

</queue-to-precedence>

</queue-to-precedences>

</queue-to-precedence-profile>

</queue-to-precedence-profiles>

</map-profile>

</global>

</qos>

Command Syntax

queue <0-7> precedence <0-7>

Configure precedence-to-queue-profiles name

Use this attribute to set a name to Precedence to Traffic-Class profile

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<precedence-to-queue-profiles>

<precedence-to-queue-profile>

</config>

</precedence-to-queue-profile>

</precedence-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile precedence-to-queue NAME

Configure precedence-to-queue queue-id

Use this attribute to select the Traffic-Class IP Precedence is mapped to

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: queue-id

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<map-profile>

<precedence-to-queue-profiles>

<precedence-to-queue-profile>

</config>

<precedence-to-queues>

<precedence-to-queue>

<precedence-value>0</precedence-value>

<precedence-value>0</precedence-value>

</config>

<queue-id>0</queue-id>

</precedence-to-queue>

</precedence-to-queues>

</precedence-to-queue-profile>

</precedence-to-queue-profiles>

</map-profile>

</global>

</qos>

Command Syntax

precedence <0-7> queue <0-7>

Configure queue-color-to-dscp-profiles name

Use this attribute to select the Traffic-Class color to DSCP profile name

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: name

Attribute Type: string

Attribute Range: 1-31

Netconf edit-config payload

<map-profile>

<queue-color-to-dscp-profiles>

<queue-color-to-dscp-profile>

</config>

</queue-color-to-dscp-profile>

</queue-color-to-dscp-profiles>

</map-profile>

</global>

</qos>

Command Syntax

qos profile queue-color-to-dscp (NAME|default)

Configure queue-color-to-dscps color

Use this attribute to select the color to map. Default value is 3.

This command is supported when following feature are enabled QoS Mapping Profile feature

Attribute Name: color

Attribute Type: enum (green|yellow|red|all)

Attribute Name: dscp-value

Attribute Type: uint8

Attribute Range: 0-63

Netconf edit-config payload

<map-profile>

<queue-color-to-dscp-profiles>

<queue-color-to-dscp-profile>

</config>

<queue-color-to-dscps>

<queue-color-to-dscp>

<queue-id>0</queue-id>

<dscp-value>0</dscp-value>

</config>

<queue-id>0</queue-id>

</queue-color-to-dscp>

</queue-color-to-dscps>

</queue-color-to-dscp-profile>

</queue-color-to-dscp-profiles>

</map-profile>

</global>

</qos>

Command Syntax

queue <0-7> (color (green|yellow|red|all)|) dscp <0-63>

Configure cos

Use this command to enable remarking of CoS set by the egress map

Attribute Name: cos

Attribute Type: empty

Netconf edit-config payload

</cos>

</config>

</remark>

</global>

</qos>

Command Syntax

qos remark cos

Configure dei

Use this command to enable remarking of DEI set by the egress map

Attribute Name: dei

Attribute Type: empty

Netconf edit-config payload

</dei>

</config>

</remark>

</global>

</qos>

Command Syntax

qos remark dei

Configure dscp

Use this command to enable remarking of DSCP set by the egress map

Attribute Name: dscp

Attribute Type: empty

Netconf edit-config payload

</dscp>

</config>

</remark>

</global>

</qos>

Command Syntax

qos remark dscp

Configure type

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>1</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map NAME

Configure match criteria

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>1</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map type (qos) NAME

Configure class-maps name

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>match-all</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map type (qos) (match-all) NAME

Configure class-maps name

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>match-all</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map type (qos) (match-any) NAME

Configure class-maps name

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>match-all</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map (match-any) NAME

Configure class-maps name

Use this attribute to set the class-map name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: match-criteria

Attribute Type: enum (match-all|match-any)

Netconf edit-config payload

<class-maps>

<class-map>

<match-criteria>match-all</match-criteria>

</config>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

class-map (match-all) NAME

Configure reference description

This attribute configures reference description message on class-map profile for QoS type.

Attribute Name: reference-description

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<reference-description>LINE</reference-description>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

reference-description LINE

Configure access control list name

Use this attribute to classify traffic based on the Access Control List (ACL)

Attribute Name: access-control-list-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<access-control-list-name>NAME</access-control-list-name>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match access-group NAME

Configure ethertype

Use this attribute to classify traffic based on the EtherType value(s)

Attribute Name: ethertype

Attribute Type: string

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match ethertype WORD

Configure traffic type

Use this attribute to classify traffic based on the traffic type value

Attribute Name: traffic-type

Attribute Type: enum (l2-uc|l2-uc-unknown|default)

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<traffic-type>l2-uc</traffic-type>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match traffic-type (l2-uc|l2-uc-unknown|default)

Configure match-any-conditions cos

Use this attribute to classify traffic based on the Class of Service (CoS) value

Attribute Name: cos

Attribute Type: string

Attribute Range: 0-7

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match cos WORD

Configure inner cos

Use this attribute to classify traffic based on inner Class of Service (CoS) value

Attribute Name: inner-cos

Attribute Type: string

Attribute Range: 0-7

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<inner-cos>WORD</inner-cos>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match cos inner WORD

Configure vlan

Use this attribute to classify traffic based on VLAN ID. Enter VLAN ID 1-4094 or range of VLAN ID’s.

Attribute Name: vlan

Attribute Type: string

Attribute Range: 1-4094

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match vlan WORD

Configure inner vlan

Use this attribute to classify traffic based on inner VLAN ID. Enter VLAN ID 1-4094 or range of VLAN ID’s.

Attribute Name: inner-vlan

Attribute Type: string

Attribute Range: 1-4094

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<inner-vlan>WORD</inner-vlan>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match vlan inner WORD

Configure rtp

Use this attribute to classify traffic based on the Real-time Transport Protocol (RTP). The rtp value 2000-65535 or range of rtp values.

Attribute Name: rtp

Attribute Type: string

Attribute Range: 2000-65535

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match ip rtp WORD

Configure match-any-conditions dscp

Use this attribute to classify traffic based on the Differentiated Services Control Protocol (DSCP) value. Warning: In CLI show running, DSCP values with well-known names (ex.: af11, cs0) will be displayed as such. On Netconf, DSCP values will always be numeric.

Attribute Name: dscp

Attribute Type: string

Attribute Range: 0-63

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match dscp WORD

Configure precedence

Use this attribute to classify traffic based on the precedence value. Warning: In CLI show running, precedence values with well-known names (ex.: priority, immediate) will be displayed as such. On Netconf, precedence values will always be numeric.

Attribute Name: precedence

Attribute Type: string

Attribute Range: 0-7

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match precedence WORD

Configure packet protocol

Use this attribute to classify traffic based on the protocol

Attribute Name: packet-protocol

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<packet-protocol>arp</packet-protocol>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

Configure source mac

Use this attribute to classify traffic based on the source MAC address. The MAC address value allow up to 17 characters.

Attribute Name: source-mac

Attribute Type: string

Attribute Range: 1-17

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<source-mac>MAC_ADDR</source-mac>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match mac src MAC_ADDR

Configure destination mac

Use this attribute to classify traffic based on the destination MAC address. The MAC address value allow up to 17 characters.

Attribute Name: destination-mac

Attribute Type: string

Attribute Range: 1-17

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<destination-mac>MAC_ADDR</destination-mac>

</config>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match mac dest MAC_ADDR

Configure port type

Use this attribute to classify traffic based on layer 4 source port or destination port

Attribute Name: port-type

Attribute Type: enum (source-port|destination-port)

Attribute Name: port

Attribute Type: string

Attribute Range: 1-65535

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-any-conditions>

<ipv4>

<layer4-match>

<port-type>source-port</port-type>

<port-type>source-port</port-type>

</config>

</layer4-match>

</ipv4>

</match-any-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match layer4 (any|tcp|udp) (source-port|destination-port) WORD

Configure ethertype all

Use this attribute to classify traffic based on the EtherType value

Attribute Name: ethertype-all

Attribute Type: string

Attribute Range: 5-6

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<ethertype-all>WORD</ethertype-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match ethertype WORD

Configure traffic type all

Use this attribute to classify traffic based on the traffic type

Attribute Name: traffic-type-all

Attribute Type: enum (l2-uc|l2-uc-unknown|default)

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<traffic-type-all>l2-uc</traffic-type-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match traffic-type (l2-uc|l2-uc-unknown|default)

Configure cos all

Use this attribute to classify traffic based on the Class of Service (CoS) value

Attribute Name: cos-all

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<cos-all>0</cos-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match cos <0-7>

Configure inner cos all

Use this attribute to classify traffic based on the inner Class of Service (CoS) value

Attribute Name: inner-cos-all

Attribute Type: uint8

Attribute Range: 0-7

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<inner-cos-all>0</inner-cos-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match cos inner <0-7>

Configure vlan all

Use this attribute to classify traffic based on the VLAN ID

Attribute Name: vlan-all

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<vlan-all>1</vlan-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match vlan <1-4094>

Configure inner vlan all

Use this attribute to classify traffic based on the inner VLAN ID

Attribute Name: inner-vlan-all

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<inner-vlan-all>1</inner-vlan-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match vlan inner <1-4094>

Configure rtp all

Use this attribute to classify traffic based on the Real-time Transport Protocol (RTP)

Attribute Name: rtp-all

Attribute Type: string

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<rtp-all>WORD</rtp-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match ip rtp WORD

Configure dscp all

Use this attribute to classify traffic based on the Differentiated Services Control Protocol (DSCP) value. The DSCP value range is 0-63. Warning: In CLI show running, DSCP values with well-known names (ex.: af11, cs0) will be displayed as such. On Netconf, DSCP values will always be numeric. The string type allow up to 8 characters on well-known name.

Attribute Name: dscp-all

Attribute Type: union

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<dscp-all>default</dscp-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match dscp (default|cs1|af11|af12|af13|cs2|af21|af22|af23|cs3|af31|af32|af33|cs4|af41|af42|af43|cs5|ef|cs6|cs7|<0-63>)

Configure precedence all

Use this attribute to classify traffic based on the precedence value. The precedence value range is 0-7. Warning: In CLI show running, precedence values with well-known names (ex.: priority, immediate) will be displayed as such. On Netconf, precedence values will always be numeric. The string type allow up to 13 characters on well-known name.

Attribute Name: precedence-all

Attribute Type: string

Attribute Range: 1-13

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<precedence-all>WORD</precedence-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match precedence WORD

Configure packet protocol all

Use this attribute to classify traffic based on the protocol

Attribute Name: packet-protocol-all

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<packet-protocol-all>arp</packet-protocol-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

Configure source mac all

Use this attribute to classify traffic based on the source MAC address. The MAC address value allow up to 17 characters.

Attribute Name: source-mac-all

Attribute Type: string

Attribute Range: 1-17

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<source-mac-all>MAC_ADDR</source-mac-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match mac src MAC_ADDR

Configure destination mac all

Use this attribute to classify traffic based on the destination MAC address. The MAC address value allow up to 17 characters.

Attribute Name: destination-mac-all

Attribute Type: string

Attribute Range: 1-17

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<destination-mac-all>MAC_ADDR</destination-mac-all>

</config>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match mac dest MAC_ADDR

Configure port all

Use this attribute to classify traffic based on the port

Attribute Name: port-all

Attribute Type: string

Netconf edit-config payload

<class-maps>

<class-map>

</config>

<match-all-conditions>

<layer4-matches-ipv4>

<layer4-match-ipv4>

<port-all>WORD</port-all>

<port-all>1</port-all>

<port-type-all>source-port</port-type-all>

<protocol-all>any</protocol-all>

</config>

<port-type-all>source-port</port-type-all>

<protocol-all>any</protocol-all>

</layer4-match-ipv4>

</layer4-matches-ipv4>

</match-all-conditions>

</class-map>

</class-maps>

</global>

</qos>

Command Syntax

match layer4 (any|tcp|udp) (source-port|destination-port) WORD

Configure class-maps-queuing name

Use this attribute to set the class-map-queuing name

Attribute Name: name

Attribute Type: string

Attribute Range: 1-64

Attribute Name: type

Attribute Type: enum (qos|queuing|queuing-default|vlan-queuing)

Netconf edit-config payload

<class-maps-queuing>

<class-map-queuing>

</config>

</class-map-queuing>

</class-maps-queuing>

</global>

</qos>

Command Syntax

class-map type (queuing|vlan-queuing) WORD

Configure class-map-queuing reference-description

This attribute configures reference description message on class-map profile for queuing.

Attribute Name: reference-description

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<class-maps-queuing>

<class-map-queuing>

</config>

<reference-description>LINE</reference-description>

</class-map-queuing>

</class-maps-queuing>

</global>

</qos>

Command Syntax

reference-description LINE

Configure qos group

Use this attribute to classify traffic QoS group

Attribute Name: qos-group

Attribute Type: uint32

Attribute Range: 1-2000

Netconf edit-config payload

<class-maps-queuing>

<class-map-queuing>

</config>

<match-conditions>

<qos-group>1</qos-group>

</config>

</match-conditions>

</class-map-queuing>

</class-maps-queuing>

</global>

</qos>

Command Syntax

match qos-group <1-2000>

Configure vlan queue

Use this attribute to classify traffic based on the VLAN ID

Attribute Name: vlan-queue

Attribute Type: uint16

Attribute Range: 1-4094

Netconf edit-config payload

<class-maps-queuing>

<class-map-queuing>

</config>

<match-conditions>

<vlan-queue>1</vlan-queue>

</config>

</match-conditions>

</class-map-queuing>

</class-maps-queuing>

</global>

</qos>

Command Syntax

match vlan <1-4094>

Configure match-conditions cos

Use this attribute to classify traffic based on the Class of Service (CoS) value

Attribute Name: cos

Attribute Type: string

Attribute Range: 0-7

Netconf edit-config payload

<class-maps-queuing>

<class-map-queuing>

</config>

<match-conditions>

</config>

</match-conditions>

</class-map-queuing>

</class-maps-queuing>

</global>

</qos>

Command Syntax

match cos WORD

Configure policy map name

Use this attribute to set the policy-map name

Attribute Name: policy-map-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

policy-map NAME

Configure policy-maps policy-map-name

Use this attribute to set the policy-map name

Attribute Name: policy-map-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

policy-map type (qos) NAME

Configure policy-maps policy-map-name

Use this attribute to set the policy-map name

Attribute Name: policy-map-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

policy-map type (queuing) NAME

Configure policy-maps policy-map-name

Use this attribute to set the policy-map name

Attribute Name: policy-map-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

policy-map type (queuing default) NAME

Configure policy-maps policy-map-name

Use this attribute to set the policy-map name

Attribute Name: policy-map-name

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

policy-map type (vlan-queuing|hybrid-queuing) NAME

Configure policy-map reference-description

This attribute configures reference description message on policy-map profile

Attribute Name: reference-description

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<reference-description>LINE</reference-description>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

reference-description LINE

Configure class map name

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: union

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>qos</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class (type (qos)|) NAME

Configure class type

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: union

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>qos</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class (type (qos)|) class-default

Configure classes class-map-name

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: union

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>queuing</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class (type (queuing)|) class-default-q

Configure classes class-map-name

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: string

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>queuing</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class (type (queuing)|) NAME

Configure classes class-map-name

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: string

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>queuing</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class (type (queuing|vlan-queuing)|) NAME

Configure classes class-map-name

Use this attribute to attach a class-map of type qos or queue to the policy-map

Attribute Name: class-map-name

Attribute Type: union

Attribute Name: class-type

Attribute Type: enum (qos|queuing|queuing default|vlan-queuing|hybrid-queuing)

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

<class-type>qos</class-type>

</config>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

class type (queuing default) (q0|q1|q2|q3|q4|q5|q6|q7)

Configure class reference-description

This attribute configures reference description message on the association between policy-map profile and class-map profile.

Attribute Name: reference-description

Attribute Type: string

Attribute Range: 1-64

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<reference-description>LINE</reference-description>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

reference-description LINE

Configure lossless

Use this attribute to set the losselss setting for queue.

Attribute Name: lossless

Attribute Type: empty

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<queue-mode>

</lossless>

</config>

</queue-mode>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

lossless

Configure weighted round robin queue weight

Use this attribute to set the weight for Weighted Round Robin queue scheduling algorithm

Attribute Name: weighted-round-robin-queue-weight

Attribute Type: uint8

Attribute Range: 1-127

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<queue-mode>

<weighted-round-robin-queue-weight>1</weighted-round-robin-queue-weight>

</config>

</queue-mode>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

wrr-queue weight <1-127>

Configure strict priority enabled

Use this attibute to set Strict Priority as queue scheduling algorithm

Attribute Name: strict-priority-enabled

Attribute Type: empty

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<queue-mode>

</strict-priority-enabled>

</config>

</queue-mode>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

priority

Configure weight

Use this attribute to set weight for Weighted Random Early Detection

Attribute Name: weight

Attribute Type: uint8

Attribute Range: 0-15

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<queue-mode>

<red>

</config>

</red>

</queue-mode>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

random-detect weight <0-15>

Configure min threshold

Use this attribute to set Weighted Random Early Detection minimum threshold

Attribute Name: min-threshold

Attribute Type: uint32

Attribute Name: max-threshold

Attribute Type: uint32

Attribute Range: 1-524288

Attribute Name: drop-probability

Attribute Type: uint8

Attribute Range: 1-100

Attribute Name: min-threshold-yellow

Attribute Type: uint32

Attribute Range: 1-524288

Attribute Name: max-threshold-yellow

Attribute Type: uint32

Attribute Range: 1-524288

Attribute Name: drop-probability-yellow

Attribute Type: uint8

Attribute Range: 1-100

Attribute Name: min-threshold-red

Attribute Type: uint32

Attribute Range: 1-524288

Attribute Name: max-threshold-red

Attribute Type: uint32

Attribute Range: 1-524288

Attribute Name: drop-probability-red

Attribute Type: uint8

Attribute Range: 1-100

Attribute Name: threshold-unit

Attribute Type: enum (packets|bytes|kbytes)

Attribute Name: explicit-congestion-notification

Attribute Type: empty

Netconf edit-config payload

<policy-maps>

<policy-map>

<policy-map-name>NAME</policy-map-name>

</config>

<policy-map-name>NAME</policy-map-name>

<class>

<class-map-name>NAME</class-map-name>

<class-map-name>NAME</class-map-name>

</config>

<queue-mode>

<red>

<wred>

<max-threshold>1</max-threshold>

<drop-probability>1</drop-probability>

<min-threshold-yellow>1</min-threshold-yellow>

<max-threshold-yellow>1</max-threshold-yellow>

<drop-probability-yellow>1</drop-probability-yellow>

<min-threshold-red>1</min-threshold-red>

<max-threshold-red>1</max-threshold-red>

<drop-probability-red>1</drop-probability-red>

<threshold-unit>packets</threshold-unit>

</explicit-congestion-notification>

<min-threshold>1</min-threshold>

</config>

</wred>

</red>

</queue-mode>

</class>

</classes>

</policy-map>

</policy-maps>

</global>

</qos>

Command Syntax

random-detect green min-threshold <1-133168898> max-threshold <1-133168898> (drop-probability <1-100>|) yellow min-threshold <1-133168898> max-threshold <1-133168898> (drop-probability <1-100>|) red min-threshold <1-133168898> max-threshold <1-133168898> (drop-probability <1-100>|) (packets|bytes|kbytes) (ecn|)

Configure max threshold