show bgp route-map
Use this command to display routes that match the specified route map.
Command Syntax
show bgp route-map WORD
show bgp (ipv4|ipv6) (unicast|multicast) route-map WORD
show bgp (ipv6) route-map WORD
show ip bgp route-map WORD
show ip bgp route-map WORD (vrf (VRFNAME|all|default))
show ip bgp ipv4 (unicast|multicast) route-map WORD
Parameters
WORD
Routes matching the route-map
ipv4
IPv4 routes
ipv6
IPv6 routes
unicast
Unicast prefixes
multicast
Multicast prefixes
vrf
VPN routing/forwarding instance
VRFNAME
VPN routing/forwarding instance name
all
All VRFs
default
Default VRF
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip bgp prefix-list Route1
BGP table version is 1, local router ID is 12.0.0.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
l - labeled, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>1.1.1.1/32 0.0.0.0 0 100 32768 i
Last modified date: 07-13-2023