show ip bgp peer-group vrf all
Use this command to list all BGP peer group VRF information.
Command Syntax
show ip bgp peer-group vrf all
Parameters
None
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip bgp peer-group vrf all
% VRF: VRF1
BGP dynamic peer-group is group2, EBGP, remote AS 64902
BGP dynamic peer-group group2 listen range group members:
12.2.0.0/16
BGP version 4
Minimum time between advertisement runs is 30 seconds
% VRF: management
Peer-Group not found
% VRF: default
BGP dynamic peer-group is group1, EBGP, remote AS 64902
BGP dynamic peer-group group1 listen range group members:
12.1.0.0/16
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
Peer-group member:
*12.1.1.2
Index 0, Offset 0, Mask 0x1
0 accepted prefixes, 0 announced prefixes
Last modified date: 07-13-2023