ethernet cfm mep
Use this command to create a Maintenance End Point (MEP), make it active or inactive and enter Ethernet CFM MA MEP mode.
A MEP created with the active false option remains inactive and CFM functionality is suspended for such a MEP.
Use the no form of this command to delete a MEP.
Command Syntax
ethernet cfm mep (down|up) mpid <1-8191> active (false|true) IFNAME
no ethernet cfm mpid <1-8191>
Parameters
down
Down MEP
active
Administrative state of the MEP
true
Make the MEP active
false
Make the MEP inactive
IFNAME
Interface name
Command Mode
Ethernet CFM MA mode
Applicability
This command was introduced in OcNOS DC version 4.2.
Example
OcNOS(config)#ethernet cfm domain-type character-string domain-name 12345 level 7
OcNOS(config-ether-cfm)#service ma-type string ma-name 43982
OcNOS(config-ether-cfm-ma)#vlan 10 bridge 1
OcNOS(config-ether-cfm-ma)#ethernet cfm mep down mpid 81 active true xe2
Last modified date: 07-13-2023