class type queuing
Use this command to add a queuing class-map to a queuing policy map.
Use the no command to remove a queuing class-map from the policy map.
Command Syntax
class (type queuing default (q0|q1|q2|q3|q4|q5|q6|q7))
no class (type queuing default (q0|q1|q2|q3|q4|q5|q6|q7))
Parameters
<q0-q7>
Default queue name
Default
No default value is specified
Command Mode
Policy Map type queuing Mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#
(config)#policy-map type queuing default PP
(config-pmap-que)#class type queuing default q0
Last modified date: 07-14-2023