policy-map
Use this command to create a policy map and enter policy-map mode.
Use the no command to remove a policy map.
Note: You cannot delete a policy map if it is attached to an interface.
Command Syntax
policy-map {NAME | (type (qos|queuing (|default)) NAME)}
no policy-map {NAME |(type (qos|queuing (|default)) NAME)}
Parameters
NAME
Policy map name (maximum 32 characters)
qos
QoS policy map
queuing
Queuing policy map
Default
No default value is specified
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#
(config)#policy-map type qos PQOS
Last modified date: 07-14-2023