set bridge dscp
Use this command to set the DSCP value for L2 packets only.
Use the no parameter with this command to unset a DSCP value.
Command Syntax
set bridge dscp (<0-63>|af11| af12| af13| af21| af22| af23| af31|
af32| af33| af41| af42| af43| cs1| cs2| cs3| cs4| cs5|
cs6| cs7| default| ef )
no set bridge dscp
Parameters
<0-63>
DSCP value
af11
DSCP (001011) decimal value 11
af12
DSCP (001100) decimal value 12
af13
DSCP (001101) decimal value 13
af21
DSCP (010101) decimal value 21
af22
DSCP (010110) decimal value 22
af23
DSCP (010111) decimal value 23
af31
DSCP (011111) decimal value 31
af32
DSCP (010000) decimal value 32
af33
DSCP (010001) decimal value 33
af41
DSCP (101001) decimal value 41
af42
DSCP (101010) decimal value 42
af43
DSCP (101011) decimal value 38
cs1
(Precedence 1) DSCP (001000) decimal value 8
cs2
(Precedence 2) DSCP (010000) decimal value 16
cs3
(Precedence 3) DSCP (011000) ecimal value 24
cs4
(Precedence 4) DSCP (100000) decimal value 32
cs5
(Precedence 5) DSCP (101000) decimal value 40
cs6
(Precedence 6) DSCP (110000) decimal value 48
cs7
(Precedence 7) DSCP (111000) decimal value 56
default
DSCP (000000) decimal value 0
ef
DSCP (101110) decimal value 46
Default
No default value is specified
Command Mode
Policy-class-map mode
Applicability
This command was introduced before OcNOS version 1.3.
This command applies only to the Trident II, Trident II+, and Tomahawk platforms.
Examples
#configure terminal
(config)#policy-map pmap1
(config-pmap)#class cmap1
(config-pmap-c)#set bridge dscp 25
Last modified date: 07-14-2023