set queue
Use this command for matching traffic classes set action as change cos in the egress packet to the prescribed value.
Use the no command to remove the assigned value from the class.
Command Syntax
set queue <0-7>
no set queue
Parameters
<0-7>
Specify queue value to assign for this class of traffic
Default
No default value is specified
Command Mode
Policy-map mode
Applicability
'This command was introduced before OcNOS version 1.3.
This command applies only to the Trident II, Trident II+, and Tomahawk platforms.
Examples
(config)# policy-map my_policy1
(config-pmap-qos)# class traffic_class2
(config-pmap-c-qos)# set queue 4
(config-pmap-c-qos)#
Last modified date: 07-14-2023