multicast-hellos
Use this command to enable multicast hello exchange on all interfaces enabled for LDP. This is used for auto-discovery of LDP peers on directly connected networks. This option is enabled by default.
Use the no parameter with this command to disable multicast hello exchange.
Command Syntax
multicast-hellos
no multicast-hellos
Parameters
None
Default
By default, multicast hello is enabled
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ldp
(config-router)#multicast-hellos
Last modified date: 07-14-2023