show ldp inter-area-fecs
Use this command to show all FECs using the LPM-based mapping procedure.
Command Syntax
show ldp inter-area-fecs
show ldp inter-area-fecs (ipv4|ipv6|) (count)
Parameter
ipv4
IPv4 FECs
ipv6
IPv6 FECs
count
Count of FECs
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS-SP version 4.0. and the command was updated in OcNOS-SP version 4.1.
Examples
#show ldp inter-area-fecs
LSR codes : E/N - LSR is egress/non-egress for this FEC,
L - LSR received a label for this FEC,
> - LSR will use this route for the FEC
Code FEC Session Out Label Nexthop Addr
Matching RIB prefix - 1.1.1.0
NL> 1.1.1.1/32 33.33.33.33 52485 11.11.11.1
NL> 1.1.1.2/32 33.33.33.33 52486 11.11.11.1
#show ldp inter-area-fecs count
------------------------
Num. IPv4 FEC(s) : 9
------------------------
------------------------
Num. IPv6 FEC(s) : 0
------------------------
------------------------
Total Num. FEC(s): 9
------------------------
#show ldp inter-area-fecs ipv4 count
------------------------
Num. IPv4 FEC(s) : 9
------------------------
#show ldp inter-area-fecs ipv6 count
------------------------
Num. IPv6 FEC(s) : 0
------------------------
Last modified date: 07-13-2023