ep1 <interface_name> ep2 <interface

OcNOS-RON-6.3.1 : Layer 1 Guide : Layer 1 Command Reference : Port Based xConnect Commands : ep1 <interface_name> ep2 <interface_name>

ep1 <interface_name> ep2 <interface_name>

Use this command to configure xConnect between two endpoints.

Command Syntax

ep1 IFNAME1 ep2 IFNAME2

Parameters

IFNAME1

Interface name for ep1

IFNAME2

Interface name for ep2

Default

None

Command Mode

Configure-XC mode

Applicability

This command was introduced in OcNOS-OTN version 1.1.0.

Example

#configure terminal

(config)#cross-connect temp

(config-XC)#ep1 xe33 ep2 xe34

Last modified date: 06-28-2023