OcNOS-RON-6.3.1 : Layer 1 Guide : Layer 1 Command Reference : Port Based xConnect Commands : link-fault-pass-through enable
link-fault-pass-through enable
Use this command to enable LFPT in the cross-connect.
Use the no form of this command to disable LFPT.
Command Syntax
link-fault-pass-through enable
no link-fault-pass-through enable
Parameters
None
Default
LFPT is disabled by default.
Command Mode
Configure-XC mode
Applicability
This command was introduced in OcNOS-OTN version 4.2.
Example
#configure terminal
(config)#cross-connect temp
(config-XC)#link-fault-pass-through enable
(config-XC)#no link-fault-pass-through enable
Last modified date: 06-28-2023