ip radius source-interface
Use this command to set the local address sent in packets to the radius server.
Use the no parameter to clear the local address.
Command Syntax
ip radius source-interface HOSTNAME PORT
no ip radius source-interface
Parameters
HOSTNAME
Specify the radius client in the dotted IP address, or in the hostname format.
PORT
Specify the radius client port number. The default port number is 1812.
Default
The default port number is 1812.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ip radius source-interface myhost 1812
(config)#no ip radius source-interface
Last modified date: 07-13-2023