control-word
Use this command to enable control word for the MPLS layer-2 virtual circuit.
Use the no parameter with this command to disable control word from the MPLS layer-2 virtual circuit.
Command Syntax:
control-word
no control-word
Parameters
NA
Default
By default, control-word is disabled
Command Mode
Configure Pseudowire mode
Applicability
This command was introduced before OcNOS version 1.X
Example
#configure terminal
(config)#mpls l2-circuit mycircuit 45678 1.2.3.4
(config-pseudowire)#control-word
Last modified date: 07-13-2023