mpls bandwidth-class
Use this command to create a new bandwidth class name. Using this command changes the command mode to Bandwidth-class mode.
Use the no parameter with this command to remove a bandwidth class name.
Command Syntax
mpls bandwidth-class NAME
no mpls bandwidth-class NAME
Parameter
NAME
Name of the bandwidth class
Default
By default, mpls bandwidth-class is disabled
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#mpls bandwidth-class new-BC
(config-mpls-bw)#
(config)#no mpls bandwidth-class new-BC
Last modified date: 07-13-2023