mpls propagate-ttl
Use this command to enable TTL propagation. Enabling TTL propagation causes the TTL value in the IP header to be copied onto the TTL field in the shim header, at the LSP ingress.
Use the no parameter with this command to disable TTL propagation.
Command Syntax
mpls propagate-ttl
no mpls propagate-ttl
Parameters
None
Default
By default, TTL propagation is disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#mpls propagate-ttl
#configure terminal
(config)#no mpls propagate-ttl
Last modified date: 07-13-2023