service-tpid
Use this command to configure service tpid for the MPLS layer-2 virtual circuit.
Use the no parameter with this command to delete service tpid from the MPLS layer-2 virtual circuit.
Command Syntax
service-tpid (dot1.q|dot1.ad|0x9100)
no service-tpid
Parameters
0x9100
Set tpid value as 0x9100
dot1.ad
Set tpid value as 0x88a8
dot1.q
Set tpid value as 0x8100
Default
By default, service-tpid is disabled
Command Mode
Configure Pseudowire mode
Applicability
This command was introduced before OcNOS version 1.X
Example
#configure terminal
(config)#mpls l2-circuit mycircuit 45678 1.2.3.4
(config-pseudowire)#service-tpid dot1.ad
Last modified date: 07-13-2023