tunnel-id
Use this command to configure tunnel identifier for the MPLS transport tunnel to be used for the MPLS layer-2 virtual circuit.
Use the no parameter with this command to delete tunnel identifier from the MPLS layer-2 virtual circuit.
Command Syntax:
tunnel-id <1-5000>
no tunnel-id
Parameters
<1-5000>
Identifying value for Tunnel-id
Default
By default, tunnel-id is disabled
Command Mode
Configure Pseudowire mode
Applicability
This command was introduced before OcNOS version 1.X
Example
#configure terminal
(config)#mpls l2-circuit mycircuit 45678 1.2.3.4
(config-pseudowire)#tunnel-id 22
Last modified date: 07-13-2023