OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Configuration Guide : Pseudowire Status : PW Status Commands
PW Status Commands
PW status commands and other related configurations for statically configured MPLS-TP PWs.
mpls l2-circuit NAME VC-ID PEER-GLOBAL-ID PEER-NODE-ID PEER-AC-ID GROUP-NAME (manual (pw-status (REFRESH-TIME))
 
Parameter
Description
pw-status
Enables PW status for manual configured PW (Static PW). To disable it, just omit this and reconfigure PW.
REFRESH-TIME
Specifies the time in seconds after which a PW status will be transmitted periodically if an AC fault has occurred. The range is <0-65535>. Default is 600 seconds.
Last modified date: 07-13-2023