Validation
The command “show mpls l2-circuit” includes the PW status related information for Static PW.
#show mpls l2-circuit vc1
MPLS Layer-2 Virtual Circuit: test, id: 100 PW-INDEX: 1
Endpoint: 3.4.5.6
Control Word: 1
MPLS Layer-2 Virtual Circuit Group: none
Bound to interface: eth1
Virtual Circuit Type: Ethernet VLAN
Virtual Circuit is configured as Primary
Virtual Circuit is configured as Active
Virtual Circuit runtime mode is active
STATIC-PW-STATUS: Enabled,
Local Refresh timer: 30 sec
Local PW Status:
Ingress AC Receive Fault
Egress AC Transmit Fault
Remote Refresh timer: 40 sec
Remote PW Status:
No faults detected
Last modified date: 07-13-2023