IPI-PLATFORM
Configure enable cmm
Use this attribute to turn on debugging for chassis monitoring
Attribute Name: enable-cmm
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<debug>
<config>
</enable-cmm><!-- operation="delete"-->
</config>
</debug>
</components>
Command Syntax
debug cmm
Configure enable ddm
Use this attribute to turn on debugging for digital diagnostic monitoring
Attribute Name: enable-ddm
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<debug>
<config>
</enable-ddm><!-- operation="delete"-->
</config>
</debug>
</components>
Command Syntax
debug ddm
Configure warning repeat
To enable cmm warning level logs to repeat.
Attribute Name: warning-repeat
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
</warning-repeat><!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
cmm warning repeat
Configure locator led enable
To set the locator-led on or off.
Attribute Name: locator-led-enable
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
</locator-led-enable><!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
locator-led on
Configure ddm monitor time interval
To set DDM Monitor interval time.
Attribute Name: ddm-monitor-time-interval
Attribute Type: uint16
Attribute Range: 60-3600
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
<ddm-monitor-time-interval>60</ddm-monitor-time-interval> <!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
ddm monitor interval <60-3600>
Configure vpiu control vlan
To set Video PIU Command VLAN.
Attribute Name: vpiu-control-vlan
Attribute Type: uint16
Attribute Range: 2-4094
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
<vpiu-control-vlan>2</vpiu-control-vlan> <!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
video-piu control-vlan <2-4094>
Configure service unsupported transceiver
To enable DDM Monitor for unsupported transceivers at user risk.
Attribute Name: service-unsupported-transceiver
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
</service-unsupported-transceiver><!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
service unsupported-transceiver
Configure enable ddm monitor
To enable DDM monitor for all transceivers.
Attribute Name: enable-ddm-monitor
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<config>
</enable-ddm-monitor><!-- operation="delete"-->
</config>
</global>
</components>
Command Syntax
ddm monitor all
Configure system 15min load avg alarm
System 15min average load for alarm
Attribute Name: system-15min-load-avg-alarm
Attribute Type: uint8
Attribute Range: 51-100
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<system-load-average-thresholds>
<system-load-average-threshold> <!-- operation="delete"-->
<system-15min-load-avg-alarm>51</system-15min-load-avg-alarm>
<config>
<system-15min-load-avg-alarm>51</system-15min-load-avg-alarm>
<system-5min-load-avg-alarm>51</system-5min-load-avg-alarm>
<system-1min-load-avg-alarm>51</system-1min-load-avg-alarm>
<system-1min-load-avg-warning-threshold>41</system-1min-load-avg-warning-threshold>
</config>
<system-5min-load-avg-alarm>51</system-5min-load-avg-alarm>
<system-1min-load-avg-alarm>51</system-1min-load-avg-alarm>
<system-1min-load-avg-warning-threshold>41</system-1min-load-avg-warning-threshold>
</system-load-average-threshold>
</system-load-average-thresholds>
</global>
</components>
Command Syntax
system-load-average 1min warning <41-100> alarm <51-100> 5min alarm <51-100> 15min alarm <51-100>
Configure alarm threshold
Cpu threshold for alarm
Attribute Name: alarm-threshold
Attribute Type: uint8
Attribute Range: 91-100
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<cpu-core-usage-thresholds>
<cpu-core-usage-threshold> <!-- operation="delete"-->
<alarm-threshold>91</alarm-threshold>
<config>
<alarm-threshold>91</alarm-threshold>
<warning-threshold>51</warning-threshold>
</config>
<warning-threshold>51</warning-threshold>
</cpu-core-usage-threshold>
</cpu-core-usage-thresholds>
</global>
</components>
Command Syntax
cpu-core-usage warning <51-100> alarm <91-100>
Configure gps position disable
gps postion disable
This command is supported when following feature are enabled PTP hardware offload feature enabled
Attribute Name: gps-position-disable
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<gps-position>
<config>
</gps-position-disable><!-- operation="delete"-->
</config>
</gps-position>
</global>
</components>
Command Syntax
gps position disable
Configure gps survey in position accuracy
GPS position accuracy
This command is supported when following feature are enabled PTP hardware offload feature enabled
Attribute Name: gps-survey-in-position-accuracy
Attribute Type: uint32
Attribute Range: 1-10000
Attribute Name: gps-survey-in-observation-time
Attribute Type: uint32
Attribute Range: 1-1440
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<gps-position>
<config>
<gps-survey-in-observation-time>1</gps-survey-in-observation-time> <!-- operation="delete"-->
<gps-survey-in-position-accuracy>1</gps-survey-in-position-accuracy> <!-- operation="delete"-->
</config>
</gps-position>
</global>
</components>
Command Syntax
gps position survey-in <1-1440> <1-10000>
Configure gps fixed altitude
GPS fixed altitude in meters
This command is supported when following feature are enabled PTP hardware offload feature enabled
Attribute Name: gps-fixed-altitude
Attribute Type: decimal64
Attribute Name: gps-fixed-latitude
Attribute Type: decimal64
Attribute Name: gps-fixed-longitude
Attribute Type: decimal64
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<global>
<gps-position>
<config>
<gps-fixed-latitude>LATITUDE</gps-fixed-latitude> <!-- operation="delete"-->
<gps-fixed-longitude>LONGITUDE</gps-fixed-longitude> <!-- operation="delete"-->
<gps-fixed-altitude>ALTITUDE</gps-fixed-altitude> <!-- operation="delete"-->
</config>
</gps-position>
</global>
</components>
Command Syntax
gps position fixed LATITUDE LONGITUDE ALTITUDE
Configure monitor port
To enable DDM monitor for current transceiver.
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: monitor-port
Attribute Type: enum (disable|enable)
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<monitor-port>disable</monitor-port> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
ddm monitor (disable|enable)
Configure poe enable
To enable PoE for current interface.
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: poe-enable
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
</poe-enable><!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
poe-enable
Configure videopiu port
To enable VIDEO PIU for current transceiver.
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: videopiu-port
Attribute Type: enum (disable|enable)
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<videopiu-port>disable</videopiu-port> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
video-piu (disable|enable)
Configure transceiver code
To set transceiver code for current transceiver.
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: transceiver-code
Attribute Type: enum (1000base-sx|1000base-lx|1000base-ex|1000base-cx|10gbase-sr|10gbase-lr|10gbase-er|10gbase-cr|25gbase-sr|25gbase-lr|25gbase-er|25gbase-cr|40gbase-sr4|40gbase-lr4|40gbase-er4|40gbase-cr4|100gbase-sr4|100gbase-lr4|100gbase-er4|100gbase-cr4)
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<transceiver-code>1000base-sx</transceiver-code> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
transceiver (1000base-sx|1000base-lx|1000base-ex|1000base-cx|10gbase-sr|10gbase-lr|10gbase-er|10gbase-cr|25gbase-sr|25gbase-lr|25gbase-er|25gbase-cr|40gbase-sr4|40gbase-lr4|40gbase-er4|40gbase-cr4|100gbase-sr4|100gbase-lr4|100gbase-er4|100gbase-cr4)
Configure wavelength
wavelength
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: wavelength
Attribute Type: union
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<wavelength>CML_WAVELENGTH_T</wavelength>
</interface>
</interfaces>
</components>
Command Syntax
wavelength (channel-number <1-96>|update <1528773-1566723>)
Configure tx disable
To disable laser tx for current transceiver.
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: tx-disable
Attribute Type: empty
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
</tx-disable><!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
tx-disable
Configure edfa operating mode
To set the EDFA operating mode
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: edfa-operating-mode
Attribute Type: enum (agc|apc)
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<edfa-operating-mode>agc</edfa-operating-mode> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
edfa operating-mode (agc|apc)
Configure edfa target outpwr
To set the target-outpwr
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: edfa-target-outpwr
Attribute Type: decimal64
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<edfa-target-outpwr>VALUE</edfa-target-outpwr> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
edfa target-outpwr VALUE
Configure edfa target gain
To set the target-gain
This command is supported when following feature are disabled Tibit MicroPlug OLT feature
Attribute Name: edfa-target-gain
Attribute Type: decimal64
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<interfaces>
<interface>
<interface-name>WORD</interface-name>
<config>
<interface-name>WORD</interface-name>
</config>
<edfa-target-gain>VALUE</edfa-target-gain> <!-- operation="delete"-->
</interface>
</interfaces>
</components>
Command Syntax
edfa target-gain VALUE
Configure interval
To set disk activity sampling window interval time.
Attribute Name: interval
Attribute Type: uint16
Attribute Range: 30-1200
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<disk-activity-monitoring>
<config>
<interval>30</interval> <!-- operation="delete"-->
</config>
</disk-activity-monitoring>
</components>
Command Syntax
disk-activity-monitoring interval <30-1200>
Configure read threshold
To set disk read activity alarm threshold.
Attribute Name: read-threshold
Attribute Type: uint32
Attribute Range: 1-20000
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<disk-activity-monitoring>
<config>
<read-threshold>1</read-threshold> <!-- operation="delete"-->
</config>
</disk-activity-monitoring>
</components>
Command Syntax
disk-activity-monitoring threshold read <1-20000>
Configure write threshold
To set disk write activity alarm threshold.
Attribute Name: write-threshold
Attribute Type: uint32
Attribute Range: 1-20000
Netconf edit-config payload
<components xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<disk-activity-monitoring>
<config>
<write-threshold>1</write-threshold> <!-- operation="delete"-->
</config>
</disk-activity-monitoring>
</components>
Command Syntax
disk-activity-monitoring threshold write <1-20000>
clear ddm transceiver alarm all
Netconf RPC payload
<ddm-clear-transceiver-alarm-all xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform"/>
Command Syntax
clear ddm transceiver alarm all
clear ddm transceiver alarm
Attribute Name: name
Attribute Type: string
Netconf RPC payload
<ddm-clear-transceiver-alarm xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform">
<name>WORD</name>
</ddm-clear-transceiver-alarm>
Command Syntax
clear ddm transceiver alarm
debug ddm
Netconf RPC payload
<cmm-terminal-debug-ddm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform"/>
Command Syntax
debug ddm
no debug ddm
Netconf RPC payload
<cmm-terminal-debug-ddm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform"/>
Command Syntax
no debug ddm
debug cmm
Netconf RPC payload
<cmm-terminal-debug-cmm-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform"/>
Command Syntax
debug cmm
no debug cmm
Netconf RPC payload
<cmm-terminal-debug-cmm-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-platform"/>
Command Syntax
no debug cmm