capability opaque
Use this command to enable opaque-LSAs which are Type 9, 10 and 11 LSAs that deliver information used by external applications.
Use the no form of this command to disable the feature.
Command Syntax
capability opaque
no capability opaque
Parameters
None
Default
By default, opaque-LSA is enabled.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router ospf 100
(config-router)#capability opaque
(config)#router ospf 100
(config-router)#no capability opaque
Last modified date: 07-13-2023