ipv6 ospf display route single-line
Use this command to display the output of the
show ipv6 ospf route command with each route entry in a single-line.
Use the no parameter with this command to display the output with each route entry in a multiple lines.
Command Syntax
ipv6 ospf display route single-line
no ipv6 ospf display route single-line
Parameters
None
Default
By default,
show ipv6 ospf route displays routes in multiple lines
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ipv6 ospf display route single-line
Last modified date: 07-13-2023