ipv6 pim bfd all-interfaces
Use this command to enable PIMv6 BFD on all the interfaces of a VRF instance.
Use the no option with this command to revert to default.
Command Syntax
ipv6 pim (vrf NAME|) bfd all-interfaces
no ipv6 pim (vrf NAME|) bfd all-interfaces
Parameters
vrf
The VPN routing/forwarding instance.
NAME
Specify the name of the VPN routing/forwarding instance.
Default
By default, PIMv6 BFD is disabled on all interfaces.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS-OTN version 5.1.
Examples
#configure terminal
(config)#ipv6 pim bfd all-interfaces
(config)#ipv6 pim vrf TEST_VRF bfd all-interfaces
(config)#no ipv6 pim bfd all-interfaces
(config)#no ipv6 pim vrf TEST_VRF bfd all-interfaces
Last modified date: 07-14-2023