ipv6 pim crp-cisco-prefix
Use this command to turn on or turn the Candidate-RP debugging timerworking with Cisco BSR.
Use the no form of this command to turn off the Candidate-RP debugging timerworking with Cisco BSR.
Command Syntax
ipv6 pim crp-cisco-prefix
no ipv6 pim crp-cisco-prefix
Parameters
crp-cisco-prefix
Candidate-RP debugging timerworking with Cisco BSR.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ipv6 pim crp-cisco-prefix
(config)#noipv6 pim crp-cisco-prefix
Last modified date: 07-14-2023