ipv6 pim neighbor-filter
Use this command to enable filtering of neighbors on the interface.
When configuring a neighbor filter and when denied by filtering access list, PIM either does not establish adjacency with a neighbor or terminates adjacency with existing neighbors.
Use the no option with this command to disable filtering of neighbors on the interface.
Command Syntax
ipv6 pim neighbor-filter (WORD)
no ipv6 pim neighbor-filter (WORD)
Parameters
WORD
Name of an IP standard access list
Command Mode
Interface mode
Default
This command is disabled; by default, there is no filtering.
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#interface fxp0
(config-if)#ipv6 pim neighbor-filter F1
(config-if)#no ipv6 neighbor-filter
Last modified date: 07-14-2023