primary elsp-signaled
Use this command to configure a primary Diff-Serv (Differentiated Services) explicitly signaled E-LSP (EXP-Inferred-PSC LSP) interface.
The classes 1 to 7 are optional parameters that can be selected from node level PHB-EXP (Per-Hop Behavior) mapping as PHBs, which will then be used for an E-LSP. If you do not specify a class with this command, all classes will be selected for the E-LSP.
Use the no parameter with this command to remove the configuration.
Command Syntax
primary elsp-signaled
primary elsp-signaled class <0-7>
primary elsp-signaled class <0-7> <0-7>
primary elsp-signaled class <0-7> <0-7> <0-7>
primary elsp-signaled class <0-7> <0-7> <0-7> <0-7>
primary elsp-signaled class <0-7> <0-7> <0-7> <0-7> <0-7>
primary elsp-signaled class <0-7> <0-7> <0-7> <0-7> <0-7> <0-7>
primary elsp-signaled class <0-7> <0-7> <0-7> <0-7> <0-7> <0-7> <0-7>
no primary elsp-signaled
Parameter
CLASS<0-7>
Diff-Serv class (queue).
Default
By default, primary elsp signaled is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary elsp-signaled 2 5 0 6
(config)#rsvp-trunk T1
(config-trunk)#no primary elsp-signaled
Last modified date: 07-13-2023