from X:X::X:X
Use this command to specify a “from” IPv6 address for tunnel ingress.
Use the no parameter with this command to remove an IPv6 address from tunnel ingress.
Command Syntax
from X:X::X:X
no from X:X::X:X
no from
Parameters
None
Default
By default, from X:X::X:X is disabled
Command Mode
Router mode or Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk mytrunk
(config-trunk)#from 3ffe::3:34
#configure terminal
(config)#router rsvp
(config-router)#from 3ffe::3:34
Last modified date: 07-13-2023