OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Fast Reroute Commands : primary fast-reroute bandwidth
primary fast-reroute bandwidth
Use this command to set the detour LSP bandwidth.
Note: This command helps identify attributes of the FRR backup LSP for the one-to-one protection method.
Use the no parameter with this command to unset fast-reroute LSP bandwidth.
Command Syntax
primary fast-reroute bandwidth BANDWIDTH
no primary fast-reroute bandwidth BANDWIDTH
no primary fast-reroute BANDWIDTH
Parameter
BANDWIDTH
<1-999>k for 1 to 999 kilobits/s
<1-999>m for 1 to 999 megabits/s
<1-100>g for 1 to 100 gigabits/s
Default
By default, primary fast reroute bandwidth is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute bandwidth 10000000
Last modified date: 07-13-2023