OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Fast Reroute Commands : primary fast-reroute protection
primary fast-reroute protection
Use this command to create an Fast Reroute backup and to set an LSP one-to-one protection mechanism.
Note: This command helps identify attributes of the FRR backup LSP for the one-to-one protection method.
Use the no parameter with this command to remove LSP protection mechanism.
Parameters
None
Command Syntax
primary fast-reroute protection (one-to-one|facility)
no primary fast-reroute protection (one-to-one|facility)
Parameters
one-to-one
Set the one-to-one protection mechanism
facility
Facility backup (bypass) protection
Default
By default, primary fast reroute protection is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute protection one-to-one
 
Last modified date: 07-13-2023