OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Fast Reroute Commands : primary fast-reroute setup-priority
primary fast-reroute setup-priority
Use this command to configure a setup-priority for the detour LSP.
Note: This command helps identify attributes of the FRR backup LSP for the one-to-one protection method.
Use the no parameter with this command to remove the detour LSP setup-priority.
Command Syntax
primary fast-reroute setup-priority <0-7>
no primary fast-reroute setup-priority (<0-7>|)
Parameter
<0-7>
Set a value for setup priority
Default
By default, primary fast reroute setup priority is 0
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute setup-priority 2
Last modified date: 07-13-2023