OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : RSVP-TE Commands : enable-rsvp
enable-rsvp
Use this command to enable RSVP message exchange on an interface.
Note: To use this command, the corresponding interface needs to be enabled for label-switching using the label-switching command.
See disable-rsvp to undo the effects of this command.
Command Syntax
enable-rsvp
Parameters
None
Default
By default, RSVP message exchange is disabled.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth1
(config-if)#enable-rsvp
Last modified date: 07-13-2023