ext-tunnel-id A.B.C.D
Use this command to configure an extended-tunnel identifier as an IPv4 address. These identifiers are used in RSVP messages. If no extended-tunnel ID is specified, the LSR-ID for the router is used as the extended-tunnel ID for all LSPs. The extended-tunnel ID is a simple way of identifying all LSPs belonging to the same trunk.
Use the no parameter with this command to remove a configured extended-tunnel ID.
Command Syntax
ext-tunnel-id A.B.C.D
no ext-tunnel-id
no ext-tunnel-id
Parameters
A.B.C.D
Extended tunnel identifier for this trunk in IPv4 address format
Default
By default, the LSR-ID of the router is used as the extended-tunnel ID for all sessions.
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk t1
(config-trunk)#ext-tunnel-id 10.10.10.30
(config)#rsvp-trunk t1
(config-trunk)#no ext-tunnel-id
Last modified date: 07-13-2023