hello-timeout
Use this command to set the RSVP hello timeout. If an LSR has not received a hello message from a peer within the number of seconds set with this command, all sessions shared with this peer are reset. The hello-timeout determines how long an RSVP node waits for a hello message before declaring a neighbor to be down.
Use the no parameter with this command to set the default hello timeout value.
Command Syntax
hello-timeout <1-65535>
no hello-timeout
Parameter
<1-65535>
Time in seconds to receive a hello message.
Default
By default, hello-timeout value is 7 seconds.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router rsvp
(config-router)#hello-timeout 12
(config)#router rsvp
(config-router)#no hello-timeout
Last modified date: 07-13-2023