primary cspf-retry-timer
Use this command to specify the time between each retry that CSPF might carry out for a request received from RSVP.
Use the no parameter with this command to disable this configuration.
Command Syntax
primary cspf-retry-timer <1-600>
hno primary cspf-retry-timer
Parameter
<1-600>
Timeout between successive retries, in seconds
Default
By default, retry-timer is 0
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary cspf-retry-timer 45
(config)#rsvp-trunk T1
(config-trunk)#no primary cspf-retry-timer
Last modified date: 07-13-2023