OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : RSVP-TE Commands : primary local-protection
primary local-protection
Use this command to enable the local repair of explicit routes for which this router is a transit node.
Use the no parameter with this command to disable local repair of explicit routes.
Command Syntax
primary local-protection
no primary local-protection
Parameters
None
Default
By default, primary local protection is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary local-protection
Last modified date: 07-13-2023