refresh-resv-parsing
Use this command to disable parsing of Refresh RESV messages received from upstream nodes. Use this command to minimize message processing by RSVP when you are sure that a particular router does not need to parse Refresh RESV messages to check for changes because LSPs passing through this router are not required to be updated simultaneously.
Use the
no refresh-resv-parsing command to disable this setting.
Command Syntax
refresh-resv-parsing
Parameters
None
Default
By default, refresh reservation parsing is enabled.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
Router#configure terminal
Router(config)#router rsvp
Router(config-router)#refresh-resv-parsing
Last modified date: 07-13-2023