router rsvp
Use this command to enter router mode from configure mode and to enable the RSVP daemon, if it is not already enabled.
Use the no parameter with this command to disable RSVP on the node.
Command Syntax
router rsvp
no router rsvp
Parameters
None
Default
RSVP is started only if this command is executed.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
The command prompt changes from config to config-router, as illustrated below:
#configure terminal
(config)#router rsvp
(config-router)#
(config-router)#exit
(config)#no router rsvp
Last modified date: 07-13-2023