OcNOS-RON-6.3.1 : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : RSVP-TE Commands : secondary cspf-retry-limit
secondary cspf-retry-limit
Use this command to specify the number of retries that CSPF should carry out for a request received from RSVP.
Use the no parameter with this command to remove this configuration.
Command Syntax
secondary cspf-retry-limit <1-65535>
no secondary cspf-retry-limit
Parameter
<1-65535>
The number of times CSPF should retry for this LSP
Default
By default, no retry limit for CSPF route calculations is configured, so the value is 0.
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#secondary cspf-retry-limit 535
Last modified date: 07-13-2023