secondary label-record
Use this command to record all labels exchanged between RSVP enabled routers during the reservation setup process. This command records all labels exchanged for an LSP from the ingress to the egress, and helps with debugging.
Use the no parameter to turn off recording.
Command Syntax
secondary label-record
no secondary label-record
Default
By default, secondary label record is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk mytrunk
(config-trunk)#secondary label-record
Last modified date: 07-13-2023