secondary-priority label-record
Use this command to record all labels exchanged between RSVP enabled routers during the reservation setup process. This command records all labels exchanged for an LSP from the ingress to the egress, and helps with debugging.
Use the no parameter to turn off recording.
Command Syntax
secondary-priority <1-5> label-record
no secondary-priority <1-5> label-record
Parameters
<1-5>
Secondary Priority value.
Default
By default, label record is disabled for secondary-priority.
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)# rsvp-trunk t1
(config-trunk)#secondary-priority 1 label-record
(config)# rsvp-trunk t1
(config-trunk)# no secondary-priority 1 label-record
Last modified date: 07-13-2023