fec-mode
Use this command to configure Forward Error Correction (FEC) in a network interface to obtain error control in data transmission.
Use the no form of this command to remove FEC.
Command Syntax
fec-mode (15per-everest|15per-denali|otu4-g709|otu4-7per-staircase)
no fec-mode
Parameters
15per-everest
15percent Everest Compatible
15per-denali
15percent Denali Compatible
otu4-g709
OTU-4 G.709 FEC
otu4-7per-staircase
OTU-4 7percent Staircase
Default
The default FEC mode is 15per-denali compatible mode.
Command Mode
Netif mode
Applicability
This command was introduced in OcNOS-OTN version 1.0.4.
Example
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#fec-mode 15per-everest
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#no fec-mode
Last modified date: 07-14-2023