OcNOS-RON-6.3.1 : System Management Guide : System Management Command Reference : Coherent Optics Commands : show coherent-module SLOTNUMBER error-counters
show coherent-module SLOTNUMBER error-counters
Use this command to show network interface and host interface error counters of coherent module.
Command Syntax
show coherent-module SLOTNUMBER error-counters
Parameters
SLOTNUMBER
Enter slot number of the coherent module
Default
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS-OTN version 1.0.3.
Example
#show coherent-module 6 error-counters
 
Network-Lane 0 Counters
FEC Uncorrected Block Count : 0
OTN Section BIP-8 Error Count : 0
 
Host 0 Counters
FEC Uncorrected Block Count : 0
 
Host 1 Counters
FEC Uncorrected Block Count : 0
Last modified date: 07-14-2023