tx-laser-freq
Use this command to set the laser frequency for a network interface in Hz, THz, GHz and MHz.
Use the no form of this command to remove the configured laser frequency of the network interface.
Command Syntax
tx-laser-freq FREQUENCY
Parameters
FREQUENCY
Enter Laser frequency in Hz|MHz|GHz|THz in the range:
191300000000000Hz-196102997874080Hz
Default
193500000.000000 MHz
Command Mode
Netif mode
Applicability
This command was introduced in OcNOS-OTN version 1.0.0.
Example
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#tx-laser-freq 196102997874080Hz
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#no tx-laser-freq
Last modified date: 07-14-2023