tx-output-power
Use this command to set output power of the network interface in dBm.
Use the no form of this command to remove configured output power of the network interface.
Command Syntax
tx-output-power POWER
no tx-output-power
Parameters
POWER
Transmit output power in dBm
Default
0.00 dBm
Command Mode
Netif mode
Applicability
This command was introduced in OcNOS-OTN version 1.0.0.
Example
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#tx-output-power 1
#configure terminal
(config)#coherent-module 1
(config-module)#network-interface 0
(config-netif)#no tx-output-power
Last modified date: 07-14-2023